diff mbox series

[3/3] dt-bindings: arm: atmel: add binding for SAM9X60 shutdown controller

Message ID 1550143407-26109-4-git-send-email-claudiu.beznea@microchip.com (mailing list archive)
State Not Applicable, archived
Headers show
Series add support for SAM9X60's shutdown controller | expand

Commit Message

Claudiu Beznea Feb. 14, 2019, 11:24 a.m. UTC
From: Claudiu Beznea <claudiu.beznea@microchip.com>

Add documentation for SAM9X60 shutdown controller.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

Comments

Nicolas Ferre Feb. 18, 2019, 11:01 a.m. UTC | #1
On 14/02/2019 at 12:24, Claudiu Beznea - M18063 wrote:
> From: Claudiu Beznea <claudiu.beznea@microchip.com>
> 
> Add documentation for SAM9X60 shutdown controller.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>   Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 6 +++++-
>   1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> index 14f319f694b7..9711052c5800 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> @@ -83,7 +83,7 @@ SHDWC SAMA5D2-Compatible Shutdown Controller
>   1) shdwc node
>   
>   required properties:
> -- compatible: should be "atmel,sama5d2-shdwc".
> +- compatible: should be "atmel,sama5d2-shdwc" or "microchip,sam9x60-shdwc".
>   - reg: should contain registers location and length
>   - clocks: phandle to input clock.
>   - #address-cells: should be one. The cell is the wake-up input index.
> @@ -95,6 +95,10 @@ optional properties:
>     microseconds. It's usually a board-related property.
>   - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
>   
> +optional properties for microchip,sam9x60-shdwc:

is it for sam9x60 only or is the optional property "debounce-delay-us" 
applicable to this SoC?

> +- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
> +- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.

Well, I would make clear that the only additional optional property is 
"atmel,wakeup-rtt-timer" while the 2 other optional properties still 
apply...


>   The node contains child nodes for each wake-up input that the platform uses.
>   
>   2) input nodes
>
Claudiu Beznea Feb. 18, 2019, 2:47 p.m. UTC | #2
On 18.02.2019 13:01, Nicolas Ferre - M43238 wrote:
> On 14/02/2019 at 12:24, Claudiu Beznea - M18063 wrote:
>> From: Claudiu Beznea <claudiu.beznea@microchip.com>
>>
>> Add documentation for SAM9X60 shutdown controller.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>> ---
>>   Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 6 +++++-
>>   1 file changed, 5 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
>> index 14f319f694b7..9711052c5800 100644
>> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
>> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
>> @@ -83,7 +83,7 @@ SHDWC SAMA5D2-Compatible Shutdown Controller
>>   1) shdwc node
>>   
>>   required properties:
>> -- compatible: should be "atmel,sama5d2-shdwc".
>> +- compatible: should be "atmel,sama5d2-shdwc" or "microchip,sam9x60-shdwc".
>>   - reg: should contain registers location and length
>>   - clocks: phandle to input clock.
>>   - #address-cells: should be one. The cell is the wake-up input index.
>> @@ -95,6 +95,10 @@ optional properties:
>>     microseconds. It's usually a board-related property.
>>   - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
>>   
>> +optional properties for microchip,sam9x60-shdwc:
> 
> is it for sam9x60 only or is the optional property "debounce-delay-us" 
> applicable to this SoC?

No, I meant only to RTC and RTT.

> 
>> +- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
>> +- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
> 
> Well, I would make clear that the only additional optional property is 
> "atmel,wakeup-rtt-timer" while the 2 other optional properties still 
> apply...

Ok, I will take care of this in next version.

Thank you,
Claudiu Beznea

> 
> 
>>   The node contains child nodes for each wake-up input that the platform uses.
>>   
>>   2) input nodes
>>
> 
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 14f319f694b7..9711052c5800 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -83,7 +83,7 @@  SHDWC SAMA5D2-Compatible Shutdown Controller
 1) shdwc node
 
 required properties:
-- compatible: should be "atmel,sama5d2-shdwc".
+- compatible: should be "atmel,sama5d2-shdwc" or "microchip,sam9x60-shdwc".
 - reg: should contain registers location and length
 - clocks: phandle to input clock.
 - #address-cells: should be one. The cell is the wake-up input index.
@@ -95,6 +95,10 @@  optional properties:
   microseconds. It's usually a board-related property.
 - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
 
+optional properties for microchip,sam9x60-shdwc:
+- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
+- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
+
 The node contains child nodes for each wake-up input that the platform uses.
 
 2) input nodes