Message ID | 20190217024852.23328-3-laurent.pinchart+renesas@ideasonboard.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | VSP1: Display writeback support | expand |
Hi Laurent, On 17/02/2019 02:48, Laurent Pinchart wrote: > The WPF accesses partition configuration from pipe->partition in the > partition configuration that is not used for display pipelines. That sentence is hard to read... > Writeback support will require full configuration of the WPF while not > providing a valid pipe->partition. Rework the configuration code to fall > back to the full image width in that case, as is already done for the > part of the configuration currently relevant for display pipelines. > Ah yes - this is probably a better route than allocating a table for a single partition (which is what I had locally). > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> I like that this change also simplifies the flip/rotate handling code to make that easier to read. Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> > --- > drivers/media/platform/vsp1/vsp1_wpf.c | 16 +++++++++------- > 1 file changed, 9 insertions(+), 7 deletions(-) > > diff --git a/drivers/media/platform/vsp1/vsp1_wpf.c b/drivers/media/platform/vsp1/vsp1_wpf.c > index 32bb207b2007..a07c5944b598 100644 > --- a/drivers/media/platform/vsp1/vsp1_wpf.c > +++ b/drivers/media/platform/vsp1/vsp1_wpf.c > @@ -362,6 +362,7 @@ static void wpf_configure_partition(struct vsp1_entity *entity, > const struct vsp1_format_info *fmtinfo = wpf->fmtinfo; > unsigned int width; > unsigned int height; > + unsigned int left; > unsigned int offset; > unsigned int flip; > unsigned int i; > @@ -371,13 +372,16 @@ static void wpf_configure_partition(struct vsp1_entity *entity, > RWPF_PAD_SINK); > width = sink_format->width; > height = sink_format->height; > + left = 0; > > /* > * Cropping. The partition algorithm can split the image into > * multiple slices. > */ > - if (pipe->partitions > 1) > + if (pipe->partitions > 1) { > width = pipe->partition->wpf.width; > + left = pipe->partition->wpf.left; > + } > > vsp1_wpf_write(wpf, dlb, VI6_WPF_HSZCLIP, VI6_WPF_SZCLIP_EN | > (0 << VI6_WPF_SZCLIP_OFST_SHIFT) | > @@ -408,13 +412,11 @@ static void wpf_configure_partition(struct vsp1_entity *entity, > flip = wpf->flip.active; > > if (flip & BIT(WPF_CTRL_HFLIP) && !wpf->flip.rotate) > - offset = format->width - pipe->partition->wpf.left > - - pipe->partition->wpf.width; > + offset = format->width - left - width; > else if (flip & BIT(WPF_CTRL_VFLIP) && wpf->flip.rotate) > - offset = format->height - pipe->partition->wpf.left > - - pipe->partition->wpf.width; > + offset = format->height - left - width; > else > - offset = pipe->partition->wpf.left; > + offset = left; This hunk looks a lot simpler :) > > for (i = 0; i < format->num_planes; ++i) { > unsigned int hsub = i > 0 ? fmtinfo->hsub : 1; > @@ -436,7 +438,7 @@ static void wpf_configure_partition(struct vsp1_entity *entity, > * image height. > */ > if (wpf->flip.rotate) > - height = pipe->partition->wpf.width; > + height = width; > else > height = format->height; > >
Hi Kieran, On Sun, Feb 17, 2019 at 08:16:27PM +0000, Kieran Bingham wrote: > On 17/02/2019 02:48, Laurent Pinchart wrote: > > The WPF accesses partition configuration from pipe->partition in the > > partition configuration that is not used for display pipelines. > > That sentence is hard to read... Indeed. I'll rewrite it. > > Writeback support will require full configuration of the WPF while not > > providing a valid pipe->partition. Rework the configuration code to fall > > back to the full image width in that case, as is already done for the > > part of the configuration currently relevant for display pipelines. > > > > Ah yes - this is probably a better route than allocating a table for a > single partition (which is what I had locally). > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > > I like that this change also simplifies the flip/rotate handling code to > make that easier to read. > > Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> > > > --- > > drivers/media/platform/vsp1/vsp1_wpf.c | 16 +++++++++------- > > 1 file changed, 9 insertions(+), 7 deletions(-) > > > > diff --git a/drivers/media/platform/vsp1/vsp1_wpf.c b/drivers/media/platform/vsp1/vsp1_wpf.c > > index 32bb207b2007..a07c5944b598 100644 > > --- a/drivers/media/platform/vsp1/vsp1_wpf.c > > +++ b/drivers/media/platform/vsp1/vsp1_wpf.c > > @@ -362,6 +362,7 @@ static void wpf_configure_partition(struct vsp1_entity *entity, > > const struct vsp1_format_info *fmtinfo = wpf->fmtinfo; > > unsigned int width; > > unsigned int height; > > + unsigned int left; > > unsigned int offset; > > unsigned int flip; > > unsigned int i; > > @@ -371,13 +372,16 @@ static void wpf_configure_partition(struct vsp1_entity *entity, > > RWPF_PAD_SINK); > > width = sink_format->width; > > height = sink_format->height; > > + left = 0; > > > > /* > > * Cropping. The partition algorithm can split the image into > > * multiple slices. > > */ > > - if (pipe->partitions > 1) > > + if (pipe->partitions > 1) { > > width = pipe->partition->wpf.width; > > + left = pipe->partition->wpf.left; > > + } > > > > vsp1_wpf_write(wpf, dlb, VI6_WPF_HSZCLIP, VI6_WPF_SZCLIP_EN | > > (0 << VI6_WPF_SZCLIP_OFST_SHIFT) | > > @@ -408,13 +412,11 @@ static void wpf_configure_partition(struct vsp1_entity *entity, > > flip = wpf->flip.active; > > > > if (flip & BIT(WPF_CTRL_HFLIP) && !wpf->flip.rotate) > > - offset = format->width - pipe->partition->wpf.left > > - - pipe->partition->wpf.width; > > + offset = format->width - left - width; > > else if (flip & BIT(WPF_CTRL_VFLIP) && wpf->flip.rotate) > > - offset = format->height - pipe->partition->wpf.left > > - - pipe->partition->wpf.width; > > + offset = format->height - left - width; > > else > > - offset = pipe->partition->wpf.left; > > + offset = left; > > This hunk looks a lot simpler :) > > > > > > for (i = 0; i < format->num_planes; ++i) { > > unsigned int hsub = i > 0 ? fmtinfo->hsub : 1; > > @@ -436,7 +438,7 @@ static void wpf_configure_partition(struct vsp1_entity *entity, > > * image height. > > */ > > if (wpf->flip.rotate) > > - height = pipe->partition->wpf.width; > > + height = width; > > else > > height = format->height; > > > > > > -- > Regards > -- > Kieran
diff --git a/drivers/media/platform/vsp1/vsp1_wpf.c b/drivers/media/platform/vsp1/vsp1_wpf.c index 32bb207b2007..a07c5944b598 100644 --- a/drivers/media/platform/vsp1/vsp1_wpf.c +++ b/drivers/media/platform/vsp1/vsp1_wpf.c @@ -362,6 +362,7 @@ static void wpf_configure_partition(struct vsp1_entity *entity, const struct vsp1_format_info *fmtinfo = wpf->fmtinfo; unsigned int width; unsigned int height; + unsigned int left; unsigned int offset; unsigned int flip; unsigned int i; @@ -371,13 +372,16 @@ static void wpf_configure_partition(struct vsp1_entity *entity, RWPF_PAD_SINK); width = sink_format->width; height = sink_format->height; + left = 0; /* * Cropping. The partition algorithm can split the image into * multiple slices. */ - if (pipe->partitions > 1) + if (pipe->partitions > 1) { width = pipe->partition->wpf.width; + left = pipe->partition->wpf.left; + } vsp1_wpf_write(wpf, dlb, VI6_WPF_HSZCLIP, VI6_WPF_SZCLIP_EN | (0 << VI6_WPF_SZCLIP_OFST_SHIFT) | @@ -408,13 +412,11 @@ static void wpf_configure_partition(struct vsp1_entity *entity, flip = wpf->flip.active; if (flip & BIT(WPF_CTRL_HFLIP) && !wpf->flip.rotate) - offset = format->width - pipe->partition->wpf.left - - pipe->partition->wpf.width; + offset = format->width - left - width; else if (flip & BIT(WPF_CTRL_VFLIP) && wpf->flip.rotate) - offset = format->height - pipe->partition->wpf.left - - pipe->partition->wpf.width; + offset = format->height - left - width; else - offset = pipe->partition->wpf.left; + offset = left; for (i = 0; i < format->num_planes; ++i) { unsigned int hsub = i > 0 ? fmtinfo->hsub : 1; @@ -436,7 +438,7 @@ static void wpf_configure_partition(struct vsp1_entity *entity, * image height. */ if (wpf->flip.rotate) - height = pipe->partition->wpf.width; + height = width; else height = format->height;
The WPF accesses partition configuration from pipe->partition in the partition configuration that is not used for display pipelines. Writeback support will require full configuration of the WPF while not providing a valid pipe->partition. Rework the configuration code to fall back to the full image width in that case, as is already done for the part of the configuration currently relevant for display pipelines. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- drivers/media/platform/vsp1/vsp1_wpf.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)