| Message ID | 154943079488.27958.9812294887340963535.stgit@lep8c.aus.stglabs.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ppc: spapr: virtual NVDIMM support | expand |
On Tue, Feb 05, 2019 at 11:26:41PM -0600, Shivaprasad G Bhat wrote: > This patch implements few of the necessary hcalls for the nvdimm support. > > PAPR semantics is such that each NVDIMM device is comprising of multiple > SCM(Storage Class Memory) blocks. The guest requests the hypervisor to bind > each of the SCM blocks of the NVDIMM device using hcalls. There can be > SCM block unbind requests in case of driver errors or unplug(not supported now) > use cases. The NVDIMM label read/writes are done through hcalls. > > Since each virtual NVDIMM device is divided into multiple SCM blocks, the bind, > unbind, and queries using hcalls on those blocks can come independently. This > doesn't fit well into the qemu device semantics, where the map/unmap are done > at the (whole)device/object level granularity. The patch doesnt actually > bind/unbind on hcalls but let it happen at the object_add/del phase itself > instead. > > The guest kernel makes bind/unbind requests for the virtual NVDIMM device at the > region level granularity. Without interleaving, each virtual NVDIMM device is > presented as separate region. There is no way to configure the virtual NVDIMM > interleaving for the guests today. So, there is no way a partial bind/unbind > request can come for the vNVDIMM in a hcall for a subset of SCM blocks of a > virtual NVDIMM. Hence it is safe to do bind/unbind everything during the > object_add/del. Hrm. I don't entirely follow the above, but implementing something that doesn't really match the PAPR model seems like it could lead to problems. > > The kernel today is not using the hcalls - h_scm_mem_query, h_scm_mem_clear, > h_scm_query_logical_mem_binding and h_scm_query_block_mem_binding. They are just > stubs in this patch. > > Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> > --- > hw/ppc/spapr_hcall.c | 230 ++++++++++++++++++++++++++++++++++++++++++++++++ > include/hw/ppc/spapr.h | 12 ++- > 2 files changed, 240 insertions(+), 2 deletions(-) > > diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c > index 17bcaa3822..40553e80d6 100644 > --- a/hw/ppc/spapr_hcall.c > +++ b/hw/ppc/spapr_hcall.c > @@ -3,11 +3,13 @@ > #include "sysemu/hw_accel.h" > #include "sysemu/sysemu.h" > #include "qemu/log.h" > +#include "qemu/range.h" > #include "qemu/error-report.h" > #include "cpu.h" > #include "exec/exec-all.h" > #include "helper_regs.h" > #include "hw/ppc/spapr.h" > +#include "hw/ppc/spapr_drc.h" > #include "hw/ppc/spapr_cpu_core.h" > #include "mmu-hash64.h" > #include "cpu-models.h" > @@ -16,6 +18,7 @@ > #include "hw/ppc/spapr_ovec.h" > #include "mmu-book3s-v3.h" > #include "hw/mem/memory-device.h" > +#include "hw/mem/nvdimm.h" > > struct LPCRSyncState { > target_ulong value; > @@ -1808,6 +1811,222 @@ static target_ulong h_update_dt(PowerPCCPU *cpu, sPAPRMachineState *spapr, > return H_SUCCESS; > } > > +static target_ulong h_scm_read_metadata(PowerPCCPU *cpu, > + sPAPRMachineState *spapr, > + target_ulong opcode, > + target_ulong *args) > +{ > + uint32_t drc_index = args[0]; > + uint64_t offset = args[1]; > + uint8_t numBytesToRead = args[2]; This will truncate the argument to 8 bits _before_ you validate it, which doesn't seem like what you want. > + sPAPRDRConnector *drc = spapr_drc_by_index(drc_index); > + NVDIMMDevice *nvdimm = NULL; > + NVDIMMClass *ddc = NULL; > + > + if (numBytesToRead != 1 && numBytesToRead != 2 && > + numBytesToRead != 4 && numBytesToRead != 8) { > + return H_P3; > + } > + > + if (offset & (numBytesToRead - 1)) { > + return H_P2; > + } > + > + if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) { > + return H_PARAMETER; > + } > + > + nvdimm = NVDIMM(drc->dev); > + ddc = NVDIMM_GET_CLASS(nvdimm); > + > + ddc->read_label_data(nvdimm, &args[0], numBytesToRead, offset); Hm. Is this the only way to access the label data, or is it also mapped into the guest visible address space? I ask because some of the calculations you made about size+label_size in an earlier patch seemed to suggest it was part of the address space. > + return H_SUCCESS; > +} > + > + > +static target_ulong h_scm_write_metadata(PowerPCCPU *cpu, > + sPAPRMachineState *spapr, > + target_ulong opcode, > + target_ulong *args) > +{ > + uint32_t drc_index = args[0]; > + uint64_t offset = args[1]; > + uint64_t data = args[2]; > + int8_t numBytesToWrite = args[3]; > + sPAPRDRConnector *drc = spapr_drc_by_index(drc_index); > + NVDIMMDevice *nvdimm = NULL; > + DeviceState *dev = NULL; > + NVDIMMClass *ddc = NULL; > + > + if (numBytesToWrite != 1 && numBytesToWrite != 2 && > + numBytesToWrite != 4 && numBytesToWrite != 8) { > + return H_P4; > + } > + > + if (offset & (numBytesToWrite - 1)) { > + return H_P2; > + } > + > + if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) { > + return H_PARAMETER; > + } > + > + dev = drc->dev; > + nvdimm = NVDIMM(dev); > + if (offset >= nvdimm->label_size) { > + return H_P3; > + } > + > + ddc = NVDIMM_GET_CLASS(nvdimm); > + > + ddc->write_label_data(nvdimm, &data, numBytesToWrite, offset); > + > + return H_SUCCESS; > +} > + > +static target_ulong h_scm_bind_mem(PowerPCCPU *cpu, sPAPRMachineState *spapr, > + target_ulong opcode, > + target_ulong *args) > +{ > + uint32_t drc_index = args[0]; > + uint64_t starting_index = args[1]; > + uint64_t no_of_scm_blocks_to_bind = args[2]; > + uint64_t target_logical_mem_addr = args[3]; > + uint64_t continue_token = args[4]; > + uint64_t size; > + uint64_t total_no_of_scm_blocks; > + > + sPAPRDRConnector *drc = spapr_drc_by_index(drc_index); > + hwaddr addr; > + DeviceState *dev = NULL; > + PCDIMMDevice *dimm = NULL; > + Error *local_err = NULL; > + > + if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) { > + return H_PARAMETER; > + } > + > + dev = drc->dev; > + dimm = PC_DIMM(dev); > + > + size = object_property_get_uint(OBJECT(dimm), > + PC_DIMM_SIZE_PROP, &local_err); > + if (local_err) { > + error_report_err(local_err); > + return H_PARAMETER; This should probably be H_HARDWARE, no? The error isn't caused by one of the parameters. > + } > + > + total_no_of_scm_blocks = size / SPAPR_MINIMUM_SCM_BLOCK_SIZE; > + > + if (starting_index > total_no_of_scm_blocks) { > + return H_P2; > + } > + > + if ((starting_index + no_of_scm_blocks_to_bind) > > total_no_of_scm_blocks) { You should probably have a check for integer overflow here as well, just to be thorough. > + return H_P3; > + } > + > + /* Currently qemu assigns the address. */ > + if (target_logical_mem_addr != 0xffffffffffffffff) { > + return H_OVERLAP; > + } > + > + /* > + * Currently continue token should be zero qemu has already bound > + * everything and this hcall doesnt return H_BUSY. > + */ > + if (continue_token > 0) { > + return H_P5; > + } > + > + /* NB : Already bound, Return target logical address in R4 */ > + addr = object_property_get_uint(OBJECT(dimm), > + PC_DIMM_ADDR_PROP, &local_err); > + if (local_err) { > + error_report_err(local_err); > + return H_PARAMETER; > + } > + > + args[1] = addr; > + > + return H_SUCCESS; > +} > + > +static target_ulong h_scm_unbind_mem(PowerPCCPU *cpu, sPAPRMachineState *spapr, > + target_ulong opcode, > + target_ulong *args) > +{ > + uint64_t starting_scm_logical_addr = args[0]; > + uint64_t no_of_scm_blocks_to_unbind = args[1]; > + uint64_t size_to_unbind; > + uint64_t continue_token = args[2]; > + Range as = range_empty; > + GSList *dimms = NULL; > + bool valid = false; > + > + size_to_unbind = no_of_scm_blocks_to_unbind * SPAPR_MINIMUM_SCM_BLOCK_SIZE; > + > + /* Check if starting_scm_logical_addr is block aligned */ > + if (!QEMU_IS_ALIGNED(starting_scm_logical_addr, > + SPAPR_MINIMUM_SCM_BLOCK_SIZE)) { > + return H_PARAMETER; > + } > + > + range_init_nofail(&as, starting_scm_logical_addr, size_to_unbind); > + > + dimms = nvdimm_get_device_list(); > + for (; dimms; dimms = dimms->next) { > + NVDIMMDevice *nvdimm = dimms->data; > + Range tmp; > + int size = object_property_get_int(OBJECT(nvdimm), PC_DIMM_SIZE_PROP, > + NULL); > + int addr = object_property_get_int(OBJECT(nvdimm), PC_DIMM_ADDR_PROP, > + NULL); > + range_init_nofail(&tmp, addr, size); > + > + if (range_contains_range(&tmp, &as)) { > + valid = true; > + break; > + } > + } > + > + if (!valid) { > + return H_P2; > + } > + > + if (continue_token > 0) { > + return H_P3; > + } > + > + /*NB : dont do anything, let object_del take care of this for now. */ > + > + return H_SUCCESS; > +} > + > +static target_ulong h_scm_query_block_mem_binding(PowerPCCPU *cpu, > + sPAPRMachineState *spapr, > + target_ulong opcode, > + target_ulong *args) > +{ > + return H_SUCCESS; > +} > + > +static target_ulong h_scm_query_logical_mem_binding(PowerPCCPU *cpu, > + sPAPRMachineState *spapr, > + target_ulong opcode, > + target_ulong *args) > +{ > + return H_SUCCESS; > +} > + > +static target_ulong h_scm_mem_query(PowerPCCPU *cpu, sPAPRMachineState *spapr, > + target_ulong opcode, > + target_ulong *args) > +{ > + return H_SUCCESS; > +} > + > static spapr_hcall_fn papr_hypercall_table[(MAX_HCALL_OPCODE / 4) + 1]; > static spapr_hcall_fn kvmppc_hypercall_table[KVMPPC_HCALL_MAX - KVMPPC_HCALL_BASE + 1]; > > @@ -1907,6 +2126,17 @@ static void hypercall_register_types(void) > /* qemu/KVM-PPC specific hcalls */ > spapr_register_hypercall(KVMPPC_H_RTAS, h_rtas); > > + /* qemu/scm specific hcalls */ > + spapr_register_hypercall(H_SCM_READ_METADATA, h_scm_read_metadata); > + spapr_register_hypercall(H_SCM_WRITE_METADATA, h_scm_write_metadata); > + spapr_register_hypercall(H_SCM_BIND_MEM, h_scm_bind_mem); > + spapr_register_hypercall(H_SCM_UNBIND_MEM, h_scm_unbind_mem); > + spapr_register_hypercall(H_SCM_QUERY_BLOCK_MEM_BINDING, > + h_scm_query_block_mem_binding); > + spapr_register_hypercall(H_SCM_QUERY_LOGICAL_MEM_BINDING, > + h_scm_query_logical_mem_binding); > + spapr_register_hypercall(H_SCM_MEM_QUERY, h_scm_mem_query); > + > /* ibm,client-architecture-support support */ > spapr_register_hypercall(KVMPPC_H_CAS, h_client_architecture_support); > > diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h > index 21a9709afe..28249567f4 100644 > --- a/include/hw/ppc/spapr.h > +++ b/include/hw/ppc/spapr.h > @@ -268,6 +268,7 @@ struct sPAPRMachineState { > #define H_P7 -60 > #define H_P8 -61 > #define H_P9 -62 > +#define H_OVERLAP -68 > #define H_UNSUPPORTED_FLAG -256 > #define H_MULTI_THREADS_ACTIVE -9005 > > @@ -473,8 +474,15 @@ struct sPAPRMachineState { > #define H_INT_ESB 0x3C8 > #define H_INT_SYNC 0x3CC > #define H_INT_RESET 0x3D0 > - > -#define MAX_HCALL_OPCODE H_INT_RESET > +#define H_SCM_READ_METADATA 0x3E4 > +#define H_SCM_WRITE_METADATA 0x3E8 > +#define H_SCM_BIND_MEM 0x3EC > +#define H_SCM_UNBIND_MEM 0x3F0 > +#define H_SCM_QUERY_BLOCK_MEM_BINDING 0x3F4 > +#define H_SCM_QUERY_LOGICAL_MEM_BINDING 0x3F8 > +#define H_SCM_MEM_QUERY 0x3FC > + > +#define MAX_HCALL_OPCODE H_SCM_MEM_QUERY > > /* The hcalls above are standardized in PAPR and implemented by pHyp > * as well. >
On 02/12/2019 07:58 AM, David Gibson wrote: > On Tue, Feb 05, 2019 at 11:26:41PM -0600, Shivaprasad G Bhat wrote: >> This patch implements few of the necessary hcalls for the nvdimm support. >> >> PAPR semantics is such that each NVDIMM device is comprising of multiple >> SCM(Storage Class Memory) blocks. The guest requests the hypervisor to bind >> each of the SCM blocks of the NVDIMM device using hcalls. There can be >> SCM block unbind requests in case of driver errors or unplug(not supported now) >> use cases. The NVDIMM label read/writes are done through hcalls. >> >> Since each virtual NVDIMM device is divided into multiple SCM blocks, the bind, >> unbind, and queries using hcalls on those blocks can come independently. This >> doesn't fit well into the qemu device semantics, where the map/unmap are done >> at the (whole)device/object level granularity. The patch doesnt actually >> bind/unbind on hcalls but let it happen at the object_add/del phase itself >> instead. >> >> The guest kernel makes bind/unbind requests for the virtual NVDIMM device at the >> region level granularity. Without interleaving, each virtual NVDIMM device is >> presented as separate region. There is no way to configure the virtual NVDIMM >> interleaving for the guests today. So, there is no way a partial bind/unbind >> request can come for the vNVDIMM in a hcall for a subset of SCM blocks of a >> virtual NVDIMM. Hence it is safe to do bind/unbind everything during the >> object_add/del. > Hrm. I don't entirely follow the above, but implementing something > that doesn't really match the PAPR model seems like it could lead to > problems. In qemu, the device is mapped at the hotplug stage. However the SCM blocks map requests can come later block by block. So, we will have to figure out if NVDIMM device model is the right fit here. The interleaving of the NVDIMMs actually can send requests for binding different blocks of different devices on demand, and thus have partial mapping. But, I dont see how interleaving can be supported for Virtual NVDIMMs given the existing support is only from firmware interfaces like UEFI/BIOS. I chose this approach given virtual NVDIMM interleaving support chances are less and so pre-mapping is safe, and we can build on the existing NVDIMM model. >> The kernel today is not using the hcalls - h_scm_mem_query, h_scm_mem_clear, >> h_scm_query_logical_mem_binding and h_scm_query_block_mem_binding. They are just >> stubs in this patch. >> >> Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> >> --- >> hw/ppc/spapr_hcall.c | 230 ++++++++++++++++++++++++++++++++++++++++++++++++ >> include/hw/ppc/spapr.h | 12 ++- >> 2 files changed, 240 insertions(+), 2 deletions(-) >> >> diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c >> index 17bcaa3822..40553e80d6 100644 >> --- a/hw/ppc/spapr_hcall.c >> +++ b/hw/ppc/spapr_hcall.c >> @@ -3,11 +3,13 @@ >> #include "sysemu/hw_accel.h" >> #include "sysemu/sysemu.h" >> #include "qemu/log.h" >> +#include "qemu/range.h" >> #include "qemu/error-report.h" >> #include "cpu.h" >> #include "exec/exec-all.h" >> #include "helper_regs.h" >> #include "hw/ppc/spapr.h" >> +#include "hw/ppc/spapr_drc.h" >> #include "hw/ppc/spapr_cpu_core.h" >> #include "mmu-hash64.h" >> #include "cpu-models.h" >> @@ -16,6 +18,7 @@ >> #include "hw/ppc/spapr_ovec.h" >> #include "mmu-book3s-v3.h" >> #include "hw/mem/memory-device.h" >> +#include "hw/mem/nvdimm.h" >> >> struct LPCRSyncState { >> target_ulong value; >> @@ -1808,6 +1811,222 @@ static target_ulong h_update_dt(PowerPCCPU *cpu, sPAPRMachineState *spapr, >> return H_SUCCESS; >> } >> >> +static target_ulong h_scm_read_metadata(PowerPCCPU *cpu, >> + sPAPRMachineState *spapr, >> + target_ulong opcode, >> + target_ulong *args) >> +{ >> + uint32_t drc_index = args[0]; >> + uint64_t offset = args[1]; >> + uint8_t numBytesToRead = args[2]; > This will truncate the argument to 8 bits _before_ you validate it, > which doesn't seem like what you want. I'll fix it. >> + sPAPRDRConnector *drc = spapr_drc_by_index(drc_index); >> + NVDIMMDevice *nvdimm = NULL; >> + NVDIMMClass *ddc = NULL; >> + >> + if (numBytesToRead != 1 && numBytesToRead != 2 && >> + numBytesToRead != 4 && numBytesToRead != 8) { >> + return H_P3; >> + } >> + >> + if (offset & (numBytesToRead - 1)) { >> + return H_P2; >> + } >> + >> + if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) { >> + return H_PARAMETER; >> + } >> + >> + nvdimm = NVDIMM(drc->dev); >> + ddc = NVDIMM_GET_CLASS(nvdimm); >> + >> + ddc->read_label_data(nvdimm, &args[0], numBytesToRead, offset); > Hm. Is this the only way to access the label data, or is it also > mapped into the guest visible address space? I ask because some of > the calculations you made about size+label_size in an earlier patch > seemed to suggest it was part of the address space. Yes. The label is not mapped to the guest visible address space. You are right in pointing that out, its a bug. That is not needed as in the same patch I am doing QEMU_ALIGN_DOWN(size, SPAPR_MINIMUM_SCM_BLOCK_SIZE) to the nvdimm size in spapr_memory_pre_plug(). >> + return H_SUCCESS; >> +} >> + >> + >> +static target_ulong h_scm_write_metadata(PowerPCCPU *cpu, >> + sPAPRMachineState *spapr, >> + target_ulong opcode, >> + target_ulong *args) >> +{ >> + uint32_t drc_index = args[0]; >> + uint64_t offset = args[1]; >> + uint64_t data = args[2]; >> + int8_t numBytesToWrite = args[3]; >> + sPAPRDRConnector *drc = spapr_drc_by_index(drc_index); >> + NVDIMMDevice *nvdimm = NULL; >> + DeviceState *dev = NULL; >> + NVDIMMClass *ddc = NULL; >> + >> + if (numBytesToWrite != 1 && numBytesToWrite != 2 && >> + numBytesToWrite != 4 && numBytesToWrite != 8) { >> + return H_P4; >> + } >> + >> + if (offset & (numBytesToWrite - 1)) { >> + return H_P2; >> + } >> + >> + if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) { >> + return H_PARAMETER; >> + } >> + >> + dev = drc->dev; >> + nvdimm = NVDIMM(dev); >> + if (offset >= nvdimm->label_size) { >> + return H_P3; >> + } >> + >> + ddc = NVDIMM_GET_CLASS(nvdimm); >> + >> + ddc->write_label_data(nvdimm, &data, numBytesToWrite, offset); >> + >> + return H_SUCCESS; >> +} >> + >> +static target_ulong h_scm_bind_mem(PowerPCCPU *cpu, sPAPRMachineState *spapr, >> + target_ulong opcode, >> + target_ulong *args) >> +{ >> + uint32_t drc_index = args[0]; >> + uint64_t starting_index = args[1]; >> + uint64_t no_of_scm_blocks_to_bind = args[2]; >> + uint64_t target_logical_mem_addr = args[3]; >> + uint64_t continue_token = args[4]; >> + uint64_t size; >> + uint64_t total_no_of_scm_blocks; >> + >> + sPAPRDRConnector *drc = spapr_drc_by_index(drc_index); >> + hwaddr addr; >> + DeviceState *dev = NULL; >> + PCDIMMDevice *dimm = NULL; >> + Error *local_err = NULL; >> + >> + if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) { >> + return H_PARAMETER; >> + } >> + >> + dev = drc->dev; >> + dimm = PC_DIMM(dev); >> + >> + size = object_property_get_uint(OBJECT(dimm), >> + PC_DIMM_SIZE_PROP, &local_err); >> + if (local_err) { >> + error_report_err(local_err); >> + return H_PARAMETER; > This should probably be H_HARDWARE, no? The error isn't caused by one > of the parameters. Its not clearly defined, so I chose H_PARAMETER to suggest the drc index was probably wrong. >> + } >> + >> + total_no_of_scm_blocks = size / SPAPR_MINIMUM_SCM_BLOCK_SIZE; >> + >> + if (starting_index > total_no_of_scm_blocks) { >> + return H_P2; >> + } >> + >> + if ((starting_index + no_of_scm_blocks_to_bind) > >> total_no_of_scm_blocks) { > You should probably have a check for integer overflow here as well, > just to be thorough. Ok >> + return H_P3; >> + } >> + >> + /* Currently qemu assigns the address. */ >> + if (target_logical_mem_addr != 0xffffffffffffffff) { >> + return H_OVERLAP; >> + } >> + >> + /* >> + * Currently continue token should be zero qemu has already bound >> + * everything and this hcall doesnt return H_BUSY. >> + */ >> + if (continue_token > 0) { >> + return H_P5; >> + } >> + >> + /* NB : Already bound, Return target logical address in R4 */ >> + addr = object_property_get_uint(OBJECT(dimm), >> + PC_DIMM_ADDR_PROP, &local_err); >> + if (local_err) { >> + error_report_err(local_err); >> + return H_PARAMETER; >> + } >> + >> + args[1] = addr; >> + >> + return H_SUCCESS; >> +} >> + >> +static target_ulong h_scm_unbind_mem(PowerPCCPU *cpu, sPAPRMachineState *spapr, >> + target_ulong opcode, >> + target_ulong *args) >> +{ >> + uint64_t starting_scm_logical_addr = args[0]; >> + uint64_t no_of_scm_blocks_to_unbind = args[1]; >> + uint64_t size_to_unbind; >> + uint64_t continue_token = args[2]; >> + Range as = range_empty; >> + GSList *dimms = NULL; >> + bool valid = false; >> + >> + size_to_unbind = no_of_scm_blocks_to_unbind * SPAPR_MINIMUM_SCM_BLOCK_SIZE; >> + >> + /* Check if starting_scm_logical_addr is block aligned */ >> + if (!QEMU_IS_ALIGNED(starting_scm_logical_addr, >> + SPAPR_MINIMUM_SCM_BLOCK_SIZE)) { >> + return H_PARAMETER; >> + } >> + >> + range_init_nofail(&as, starting_scm_logical_addr, size_to_unbind); >> + >> + dimms = nvdimm_get_device_list(); >> + for (; dimms; dimms = dimms->next) { >> + NVDIMMDevice *nvdimm = dimms->data; >> + Range tmp; >> + int size = object_property_get_int(OBJECT(nvdimm), PC_DIMM_SIZE_PROP, >> + NULL); >> + int addr = object_property_get_int(OBJECT(nvdimm), PC_DIMM_ADDR_PROP, >> + NULL); >> + range_init_nofail(&tmp, addr, size); >> + >> + if (range_contains_range(&tmp, &as)) { >> + valid = true; >> + break; >> + } >> + } >> + >> + if (!valid) { >> + return H_P2; >> + } >> + >> + if (continue_token > 0) { >> + return H_P3; >> + } >> + >> + /*NB : dont do anything, let object_del take care of this for now. */ >> + >> + return H_SUCCESS; >> +} >> + >> +static target_ulong h_scm_query_block_mem_binding(PowerPCCPU *cpu, >> + sPAPRMachineState *spapr, >> + target_ulong opcode, >> + target_ulong *args) >> +{ >> + return H_SUCCESS; >> +} >> + >> +static target_ulong h_scm_query_logical_mem_binding(PowerPCCPU *cpu, >> + sPAPRMachineState *spapr, >> + target_ulong opcode, >> + target_ulong *args) >> +{ >> + return H_SUCCESS; >> +} >> + >> +static target_ulong h_scm_mem_query(PowerPCCPU *cpu, sPAPRMachineState *spapr, >> + target_ulong opcode, >> + target_ulong *args) >> +{ >> + return H_SUCCESS; >> +} >> + >> static spapr_hcall_fn papr_hypercall_table[(MAX_HCALL_OPCODE / 4) + 1]; >> static spapr_hcall_fn kvmppc_hypercall_table[KVMPPC_HCALL_MAX - KVMPPC_HCALL_BASE + 1]; >> >> @@ -1907,6 +2126,17 @@ static void hypercall_register_types(void) >> /* qemu/KVM-PPC specific hcalls */ >> spapr_register_hypercall(KVMPPC_H_RTAS, h_rtas); >> >> + /* qemu/scm specific hcalls */ >> + spapr_register_hypercall(H_SCM_READ_METADATA, h_scm_read_metadata); >> + spapr_register_hypercall(H_SCM_WRITE_METADATA, h_scm_write_metadata); >> + spapr_register_hypercall(H_SCM_BIND_MEM, h_scm_bind_mem); >> + spapr_register_hypercall(H_SCM_UNBIND_MEM, h_scm_unbind_mem); >> + spapr_register_hypercall(H_SCM_QUERY_BLOCK_MEM_BINDING, >> + h_scm_query_block_mem_binding); >> + spapr_register_hypercall(H_SCM_QUERY_LOGICAL_MEM_BINDING, >> + h_scm_query_logical_mem_binding); >> + spapr_register_hypercall(H_SCM_MEM_QUERY, h_scm_mem_query); >> + >> /* ibm,client-architecture-support support */ >> spapr_register_hypercall(KVMPPC_H_CAS, h_client_architecture_support); >> >> diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h >> index 21a9709afe..28249567f4 100644 >> --- a/include/hw/ppc/spapr.h >> +++ b/include/hw/ppc/spapr.h >> @@ -268,6 +268,7 @@ struct sPAPRMachineState { >> #define H_P7 -60 >> #define H_P8 -61 >> #define H_P9 -62 >> +#define H_OVERLAP -68 >> #define H_UNSUPPORTED_FLAG -256 >> #define H_MULTI_THREADS_ACTIVE -9005 >> >> @@ -473,8 +474,15 @@ struct sPAPRMachineState { >> #define H_INT_ESB 0x3C8 >> #define H_INT_SYNC 0x3CC >> #define H_INT_RESET 0x3D0 >> - >> -#define MAX_HCALL_OPCODE H_INT_RESET >> +#define H_SCM_READ_METADATA 0x3E4 >> +#define H_SCM_WRITE_METADATA 0x3E8 >> +#define H_SCM_BIND_MEM 0x3EC >> +#define H_SCM_UNBIND_MEM 0x3F0 >> +#define H_SCM_QUERY_BLOCK_MEM_BINDING 0x3F4 >> +#define H_SCM_QUERY_LOGICAL_MEM_BINDING 0x3F8 >> +#define H_SCM_MEM_QUERY 0x3FC >> + >> +#define MAX_HCALL_OPCODE H_SCM_MEM_QUERY >> >> /* The hcalls above are standardized in PAPR and implemented by pHyp >> * as well. >>
On Fri, Feb 15, 2019 at 04:41:10PM +0530, Shivaprasad G Bhat wrote: > > > On 02/12/2019 07:58 AM, David Gibson wrote: > > On Tue, Feb 05, 2019 at 11:26:41PM -0600, Shivaprasad G Bhat wrote: > > > This patch implements few of the necessary hcalls for the nvdimm support. > > > > > > PAPR semantics is such that each NVDIMM device is comprising of multiple > > > SCM(Storage Class Memory) blocks. The guest requests the hypervisor to bind > > > each of the SCM blocks of the NVDIMM device using hcalls. There can be > > > SCM block unbind requests in case of driver errors or unplug(not supported now) > > > use cases. The NVDIMM label read/writes are done through hcalls. > > > > > > Since each virtual NVDIMM device is divided into multiple SCM blocks, the bind, > > > unbind, and queries using hcalls on those blocks can come independently. This > > > doesn't fit well into the qemu device semantics, where the map/unmap are done > > > at the (whole)device/object level granularity. The patch doesnt actually > > > bind/unbind on hcalls but let it happen at the object_add/del phase itself > > > instead. > > > > > > The guest kernel makes bind/unbind requests for the virtual NVDIMM device at the > > > region level granularity. Without interleaving, each virtual NVDIMM device is > > > presented as separate region. There is no way to configure the virtual NVDIMM > > > interleaving for the guests today. So, there is no way a partial bind/unbind > > > request can come for the vNVDIMM in a hcall for a subset of SCM blocks of a > > > virtual NVDIMM. Hence it is safe to do bind/unbind everything during the > > > object_add/del. > > Hrm. I don't entirely follow the above, but implementing something > > that doesn't really match the PAPR model seems like it could lead to > > problems. > > In qemu, the device is mapped at the hotplug stage. However the SCM blocks > map requests can come later block by block. So, we will have to figure out > if NVDIMM device model is the right fit here. I don't really understand what that means. Is there any documentation I can get on the PAPR pmem model? > The interleaving of the NVDIMMs actually can send requests for binding > different blocks of different devices on demand, and thus have partial > mapping. > But, I dont see how interleaving can be supported for Virtual NVDIMMs given > the existing support is only from firmware interfaces like > UEFI/BIOS. Um.. I don't know what you mean by interleaving. > I chose this approach given virtual NVDIMM interleaving support chances are > less and so pre-mapping is safe, and we can build on the existing NVDIMM > model. > > > > The kernel today is not using the hcalls - h_scm_mem_query, h_scm_mem_clear, > > > h_scm_query_logical_mem_binding and h_scm_query_block_mem_binding. They are just > > > stubs in this patch. > > > > > > Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> > > > --- > > > hw/ppc/spapr_hcall.c | 230 ++++++++++++++++++++++++++++++++++++++++++++++++ > > > include/hw/ppc/spapr.h | 12 ++- > > > 2 files changed, 240 insertions(+), 2 deletions(-) > > > > > > diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c > > > index 17bcaa3822..40553e80d6 100644 > > > --- a/hw/ppc/spapr_hcall.c > > > +++ b/hw/ppc/spapr_hcall.c > > > @@ -3,11 +3,13 @@ > > > #include "sysemu/hw_accel.h" > > > #include "sysemu/sysemu.h" > > > #include "qemu/log.h" > > > +#include "qemu/range.h" > > > #include "qemu/error-report.h" > > > #include "cpu.h" > > > #include "exec/exec-all.h" > > > #include "helper_regs.h" > > > #include "hw/ppc/spapr.h" > > > +#include "hw/ppc/spapr_drc.h" > > > #include "hw/ppc/spapr_cpu_core.h" > > > #include "mmu-hash64.h" > > > #include "cpu-models.h" > > > @@ -16,6 +18,7 @@ > > > #include "hw/ppc/spapr_ovec.h" > > > #include "mmu-book3s-v3.h" > > > #include "hw/mem/memory-device.h" > > > +#include "hw/mem/nvdimm.h" > > > struct LPCRSyncState { > > > target_ulong value; > > > @@ -1808,6 +1811,222 @@ static target_ulong h_update_dt(PowerPCCPU *cpu, sPAPRMachineState *spapr, > > > return H_SUCCESS; > > > } > > > +static target_ulong h_scm_read_metadata(PowerPCCPU *cpu, > > > + sPAPRMachineState *spapr, > > > + target_ulong opcode, > > > + target_ulong *args) > > > +{ > > > + uint32_t drc_index = args[0]; > > > + uint64_t offset = args[1]; > > > + uint8_t numBytesToRead = args[2]; > > This will truncate the argument to 8 bits _before_ you validate it, > > which doesn't seem like what you want. > I'll fix it. > > > > + sPAPRDRConnector *drc = spapr_drc_by_index(drc_index); > > > + NVDIMMDevice *nvdimm = NULL; > > > + NVDIMMClass *ddc = NULL; > > > + > > > + if (numBytesToRead != 1 && numBytesToRead != 2 && > > > + numBytesToRead != 4 && numBytesToRead != 8) { > > > + return H_P3; > > > + } > > > + > > > + if (offset & (numBytesToRead - 1)) { > > > + return H_P2; > > > + } > > > + > > > + if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) { > > > + return H_PARAMETER; > > > + } > > > + > > > + nvdimm = NVDIMM(drc->dev); > > > + ddc = NVDIMM_GET_CLASS(nvdimm); > > > + > > > + ddc->read_label_data(nvdimm, &args[0], numBytesToRead, offset); > > Hm. Is this the only way to access the label data, or is it also > > mapped into the guest visible address space? I ask because some of > > the calculations you made about size+label_size in an earlier patch > > seemed to suggest it was part of the address space. > Yes. The label is not mapped to the guest visible address space. > You are right in pointing that out, its a bug. > That is not needed as in the same patch I am doing > QEMU_ALIGN_DOWN(size, SPAPR_MINIMUM_SCM_BLOCK_SIZE) to the > nvdimm size in spapr_memory_pre_plug(). > > > > + return H_SUCCESS; > > > +} > > > + > > > + > > > +static target_ulong h_scm_write_metadata(PowerPCCPU *cpu, > > > + sPAPRMachineState *spapr, > > > + target_ulong opcode, > > > + target_ulong *args) > > > +{ > > > + uint32_t drc_index = args[0]; > > > + uint64_t offset = args[1]; > > > + uint64_t data = args[2]; > > > + int8_t numBytesToWrite = args[3]; > > > + sPAPRDRConnector *drc = spapr_drc_by_index(drc_index); > > > + NVDIMMDevice *nvdimm = NULL; > > > + DeviceState *dev = NULL; > > > + NVDIMMClass *ddc = NULL; > > > + > > > + if (numBytesToWrite != 1 && numBytesToWrite != 2 && > > > + numBytesToWrite != 4 && numBytesToWrite != 8) { > > > + return H_P4; > > > + } > > > + > > > + if (offset & (numBytesToWrite - 1)) { > > > + return H_P2; > > > + } > > > + > > > + if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) { > > > + return H_PARAMETER; > > > + } > > > + > > > + dev = drc->dev; > > > + nvdimm = NVDIMM(dev); > > > + if (offset >= nvdimm->label_size) { > > > + return H_P3; > > > + } > > > + > > > + ddc = NVDIMM_GET_CLASS(nvdimm); > > > + > > > + ddc->write_label_data(nvdimm, &data, numBytesToWrite, offset); > > > + > > > + return H_SUCCESS; > > > +} > > > + > > > +static target_ulong h_scm_bind_mem(PowerPCCPU *cpu, sPAPRMachineState *spapr, > > > + target_ulong opcode, > > > + target_ulong *args) > > > +{ > > > + uint32_t drc_index = args[0]; > > > + uint64_t starting_index = args[1]; > > > + uint64_t no_of_scm_blocks_to_bind = args[2]; > > > + uint64_t target_logical_mem_addr = args[3]; > > > + uint64_t continue_token = args[4]; > > > + uint64_t size; > > > + uint64_t total_no_of_scm_blocks; > > > + > > > + sPAPRDRConnector *drc = spapr_drc_by_index(drc_index); > > > + hwaddr addr; > > > + DeviceState *dev = NULL; > > > + PCDIMMDevice *dimm = NULL; > > > + Error *local_err = NULL; > > > + > > > + if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) { > > > + return H_PARAMETER; > > > + } > > > + > > > + dev = drc->dev; > > > + dimm = PC_DIMM(dev); > > > + > > > + size = object_property_get_uint(OBJECT(dimm), > > > + PC_DIMM_SIZE_PROP, &local_err); > > > + if (local_err) { > > > + error_report_err(local_err); > > > + return H_PARAMETER; > > This should probably be H_HARDWARE, no? The error isn't caused by one > > of the parameters. > Its not clearly defined, so I chose H_PARAMETER to suggest the drc index > was probably wrong. > > > + } > > > + > > > + total_no_of_scm_blocks = size / SPAPR_MINIMUM_SCM_BLOCK_SIZE; > > > + > > > + if (starting_index > total_no_of_scm_blocks) { > > > + return H_P2; > > > + } > > > + > > > + if ((starting_index + no_of_scm_blocks_to_bind) > > > > total_no_of_scm_blocks) { > > You should probably have a check for integer overflow here as well, > > just to be thorough. > Ok > > > + return H_P3; > > > + } > > > + > > > + /* Currently qemu assigns the address. */ > > > + if (target_logical_mem_addr != 0xffffffffffffffff) { > > > + return H_OVERLAP; > > > + } > > > + > > > + /* > > > + * Currently continue token should be zero qemu has already bound > > > + * everything and this hcall doesnt return H_BUSY. > > > + */ > > > + if (continue_token > 0) { > > > + return H_P5; > > > + } > > > + > > > + /* NB : Already bound, Return target logical address in R4 */ > > > + addr = object_property_get_uint(OBJECT(dimm), > > > + PC_DIMM_ADDR_PROP, &local_err); > > > + if (local_err) { > > > + error_report_err(local_err); > > > + return H_PARAMETER; > > > + } > > > + > > > + args[1] = addr; > > > + > > > + return H_SUCCESS; > > > +} > > > + > > > +static target_ulong h_scm_unbind_mem(PowerPCCPU *cpu, sPAPRMachineState *spapr, > > > + target_ulong opcode, > > > + target_ulong *args) > > > +{ > > > + uint64_t starting_scm_logical_addr = args[0]; > > > + uint64_t no_of_scm_blocks_to_unbind = args[1]; > > > + uint64_t size_to_unbind; > > > + uint64_t continue_token = args[2]; > > > + Range as = range_empty; > > > + GSList *dimms = NULL; > > > + bool valid = false; > > > + > > > + size_to_unbind = no_of_scm_blocks_to_unbind * SPAPR_MINIMUM_SCM_BLOCK_SIZE; > > > + > > > + /* Check if starting_scm_logical_addr is block aligned */ > > > + if (!QEMU_IS_ALIGNED(starting_scm_logical_addr, > > > + SPAPR_MINIMUM_SCM_BLOCK_SIZE)) { > > > + return H_PARAMETER; > > > + } > > > + > > > + range_init_nofail(&as, starting_scm_logical_addr, size_to_unbind); > > > + > > > + dimms = nvdimm_get_device_list(); > > > + for (; dimms; dimms = dimms->next) { > > > + NVDIMMDevice *nvdimm = dimms->data; > > > + Range tmp; > > > + int size = object_property_get_int(OBJECT(nvdimm), PC_DIMM_SIZE_PROP, > > > + NULL); > > > + int addr = object_property_get_int(OBJECT(nvdimm), PC_DIMM_ADDR_PROP, > > > + NULL); > > > + range_init_nofail(&tmp, addr, size); > > > + > > > + if (range_contains_range(&tmp, &as)) { > > > + valid = true; > > > + break; > > > + } > > > + } > > > + > > > + if (!valid) { > > > + return H_P2; > > > + } > > > + > > > + if (continue_token > 0) { > > > + return H_P3; > > > + } > > > + > > > + /*NB : dont do anything, let object_del take care of this for now. */ > > > + > > > + return H_SUCCESS; > > > +} > > > + > > > +static target_ulong h_scm_query_block_mem_binding(PowerPCCPU *cpu, > > > + sPAPRMachineState *spapr, > > > + target_ulong opcode, > > > + target_ulong *args) > > > +{ > > > + return H_SUCCESS; > > > +} > > > + > > > +static target_ulong h_scm_query_logical_mem_binding(PowerPCCPU *cpu, > > > + sPAPRMachineState *spapr, > > > + target_ulong opcode, > > > + target_ulong *args) > > > +{ > > > + return H_SUCCESS; > > > +} > > > + > > > +static target_ulong h_scm_mem_query(PowerPCCPU *cpu, sPAPRMachineState *spapr, > > > + target_ulong opcode, > > > + target_ulong *args) > > > +{ > > > + return H_SUCCESS; > > > +} > > > + > > > static spapr_hcall_fn papr_hypercall_table[(MAX_HCALL_OPCODE / 4) + 1]; > > > static spapr_hcall_fn kvmppc_hypercall_table[KVMPPC_HCALL_MAX - KVMPPC_HCALL_BASE + 1]; > > > @@ -1907,6 +2126,17 @@ static void hypercall_register_types(void) > > > /* qemu/KVM-PPC specific hcalls */ > > > spapr_register_hypercall(KVMPPC_H_RTAS, h_rtas); > > > + /* qemu/scm specific hcalls */ > > > + spapr_register_hypercall(H_SCM_READ_METADATA, h_scm_read_metadata); > > > + spapr_register_hypercall(H_SCM_WRITE_METADATA, h_scm_write_metadata); > > > + spapr_register_hypercall(H_SCM_BIND_MEM, h_scm_bind_mem); > > > + spapr_register_hypercall(H_SCM_UNBIND_MEM, h_scm_unbind_mem); > > > + spapr_register_hypercall(H_SCM_QUERY_BLOCK_MEM_BINDING, > > > + h_scm_query_block_mem_binding); > > > + spapr_register_hypercall(H_SCM_QUERY_LOGICAL_MEM_BINDING, > > > + h_scm_query_logical_mem_binding); > > > + spapr_register_hypercall(H_SCM_MEM_QUERY, h_scm_mem_query); > > > + > > > /* ibm,client-architecture-support support */ > > > spapr_register_hypercall(KVMPPC_H_CAS, h_client_architecture_support); > > > diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h > > > index 21a9709afe..28249567f4 100644 > > > --- a/include/hw/ppc/spapr.h > > > +++ b/include/hw/ppc/spapr.h > > > @@ -268,6 +268,7 @@ struct sPAPRMachineState { > > > #define H_P7 -60 > > > #define H_P8 -61 > > > #define H_P9 -62 > > > +#define H_OVERLAP -68 > > > #define H_UNSUPPORTED_FLAG -256 > > > #define H_MULTI_THREADS_ACTIVE -9005 > > > @@ -473,8 +474,15 @@ struct sPAPRMachineState { > > > #define H_INT_ESB 0x3C8 > > > #define H_INT_SYNC 0x3CC > > > #define H_INT_RESET 0x3D0 > > > - > > > -#define MAX_HCALL_OPCODE H_INT_RESET > > > +#define H_SCM_READ_METADATA 0x3E4 > > > +#define H_SCM_WRITE_METADATA 0x3E8 > > > +#define H_SCM_BIND_MEM 0x3EC > > > +#define H_SCM_UNBIND_MEM 0x3F0 > > > +#define H_SCM_QUERY_BLOCK_MEM_BINDING 0x3F4 > > > +#define H_SCM_QUERY_LOGICAL_MEM_BINDING 0x3F8 > > > +#define H_SCM_MEM_QUERY 0x3FC > > > + > > > +#define MAX_HCALL_OPCODE H_SCM_MEM_QUERY > > > /* The hcalls above are standardized in PAPR and implemented by pHyp > > > * as well. > > > >
diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c index 17bcaa3822..40553e80d6 100644 --- a/hw/ppc/spapr_hcall.c +++ b/hw/ppc/spapr_hcall.c @@ -3,11 +3,13 @@ #include "sysemu/hw_accel.h" #include "sysemu/sysemu.h" #include "qemu/log.h" +#include "qemu/range.h" #include "qemu/error-report.h" #include "cpu.h" #include "exec/exec-all.h" #include "helper_regs.h" #include "hw/ppc/spapr.h" +#include "hw/ppc/spapr_drc.h" #include "hw/ppc/spapr_cpu_core.h" #include "mmu-hash64.h" #include "cpu-models.h" @@ -16,6 +18,7 @@ #include "hw/ppc/spapr_ovec.h" #include "mmu-book3s-v3.h" #include "hw/mem/memory-device.h" +#include "hw/mem/nvdimm.h" struct LPCRSyncState { target_ulong value; @@ -1808,6 +1811,222 @@ static target_ulong h_update_dt(PowerPCCPU *cpu, sPAPRMachineState *spapr, return H_SUCCESS; } +static target_ulong h_scm_read_metadata(PowerPCCPU *cpu, + sPAPRMachineState *spapr, + target_ulong opcode, + target_ulong *args) +{ + uint32_t drc_index = args[0]; + uint64_t offset = args[1]; + uint8_t numBytesToRead = args[2]; + sPAPRDRConnector *drc = spapr_drc_by_index(drc_index); + NVDIMMDevice *nvdimm = NULL; + NVDIMMClass *ddc = NULL; + + if (numBytesToRead != 1 && numBytesToRead != 2 && + numBytesToRead != 4 && numBytesToRead != 8) { + return H_P3; + } + + if (offset & (numBytesToRead - 1)) { + return H_P2; + } + + if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) { + return H_PARAMETER; + } + + nvdimm = NVDIMM(drc->dev); + ddc = NVDIMM_GET_CLASS(nvdimm); + + ddc->read_label_data(nvdimm, &args[0], numBytesToRead, offset); + + return H_SUCCESS; +} + + +static target_ulong h_scm_write_metadata(PowerPCCPU *cpu, + sPAPRMachineState *spapr, + target_ulong opcode, + target_ulong *args) +{ + uint32_t drc_index = args[0]; + uint64_t offset = args[1]; + uint64_t data = args[2]; + int8_t numBytesToWrite = args[3]; + sPAPRDRConnector *drc = spapr_drc_by_index(drc_index); + NVDIMMDevice *nvdimm = NULL; + DeviceState *dev = NULL; + NVDIMMClass *ddc = NULL; + + if (numBytesToWrite != 1 && numBytesToWrite != 2 && + numBytesToWrite != 4 && numBytesToWrite != 8) { + return H_P4; + } + + if (offset & (numBytesToWrite - 1)) { + return H_P2; + } + + if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) { + return H_PARAMETER; + } + + dev = drc->dev; + nvdimm = NVDIMM(dev); + if (offset >= nvdimm->label_size) { + return H_P3; + } + + ddc = NVDIMM_GET_CLASS(nvdimm); + + ddc->write_label_data(nvdimm, &data, numBytesToWrite, offset); + + return H_SUCCESS; +} + +static target_ulong h_scm_bind_mem(PowerPCCPU *cpu, sPAPRMachineState *spapr, + target_ulong opcode, + target_ulong *args) +{ + uint32_t drc_index = args[0]; + uint64_t starting_index = args[1]; + uint64_t no_of_scm_blocks_to_bind = args[2]; + uint64_t target_logical_mem_addr = args[3]; + uint64_t continue_token = args[4]; + uint64_t size; + uint64_t total_no_of_scm_blocks; + + sPAPRDRConnector *drc = spapr_drc_by_index(drc_index); + hwaddr addr; + DeviceState *dev = NULL; + PCDIMMDevice *dimm = NULL; + Error *local_err = NULL; + + if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) { + return H_PARAMETER; + } + + dev = drc->dev; + dimm = PC_DIMM(dev); + + size = object_property_get_uint(OBJECT(dimm), + PC_DIMM_SIZE_PROP, &local_err); + if (local_err) { + error_report_err(local_err); + return H_PARAMETER; + } + + total_no_of_scm_blocks = size / SPAPR_MINIMUM_SCM_BLOCK_SIZE; + + if (starting_index > total_no_of_scm_blocks) { + return H_P2; + } + + if ((starting_index + no_of_scm_blocks_to_bind) > total_no_of_scm_blocks) { + return H_P3; + } + + /* Currently qemu assigns the address. */ + if (target_logical_mem_addr != 0xffffffffffffffff) { + return H_OVERLAP; + } + + /* + * Currently continue token should be zero qemu has already bound + * everything and this hcall doesnt return H_BUSY. + */ + if (continue_token > 0) { + return H_P5; + } + + /* NB : Already bound, Return target logical address in R4 */ + addr = object_property_get_uint(OBJECT(dimm), + PC_DIMM_ADDR_PROP, &local_err); + if (local_err) { + error_report_err(local_err); + return H_PARAMETER; + } + + args[1] = addr; + + return H_SUCCESS; +} + +static target_ulong h_scm_unbind_mem(PowerPCCPU *cpu, sPAPRMachineState *spapr, + target_ulong opcode, + target_ulong *args) +{ + uint64_t starting_scm_logical_addr = args[0]; + uint64_t no_of_scm_blocks_to_unbind = args[1]; + uint64_t size_to_unbind; + uint64_t continue_token = args[2]; + Range as = range_empty; + GSList *dimms = NULL; + bool valid = false; + + size_to_unbind = no_of_scm_blocks_to_unbind * SPAPR_MINIMUM_SCM_BLOCK_SIZE; + + /* Check if starting_scm_logical_addr is block aligned */ + if (!QEMU_IS_ALIGNED(starting_scm_logical_addr, + SPAPR_MINIMUM_SCM_BLOCK_SIZE)) { + return H_PARAMETER; + } + + range_init_nofail(&as, starting_scm_logical_addr, size_to_unbind); + + dimms = nvdimm_get_device_list(); + for (; dimms; dimms = dimms->next) { + NVDIMMDevice *nvdimm = dimms->data; + Range tmp; + int size = object_property_get_int(OBJECT(nvdimm), PC_DIMM_SIZE_PROP, + NULL); + int addr = object_property_get_int(OBJECT(nvdimm), PC_DIMM_ADDR_PROP, + NULL); + range_init_nofail(&tmp, addr, size); + + if (range_contains_range(&tmp, &as)) { + valid = true; + break; + } + } + + if (!valid) { + return H_P2; + } + + if (continue_token > 0) { + return H_P3; + } + + /*NB : dont do anything, let object_del take care of this for now. */ + + return H_SUCCESS; +} + +static target_ulong h_scm_query_block_mem_binding(PowerPCCPU *cpu, + sPAPRMachineState *spapr, + target_ulong opcode, + target_ulong *args) +{ + return H_SUCCESS; +} + +static target_ulong h_scm_query_logical_mem_binding(PowerPCCPU *cpu, + sPAPRMachineState *spapr, + target_ulong opcode, + target_ulong *args) +{ + return H_SUCCESS; +} + +static target_ulong h_scm_mem_query(PowerPCCPU *cpu, sPAPRMachineState *spapr, + target_ulong opcode, + target_ulong *args) +{ + return H_SUCCESS; +} + static spapr_hcall_fn papr_hypercall_table[(MAX_HCALL_OPCODE / 4) + 1]; static spapr_hcall_fn kvmppc_hypercall_table[KVMPPC_HCALL_MAX - KVMPPC_HCALL_BASE + 1]; @@ -1907,6 +2126,17 @@ static void hypercall_register_types(void) /* qemu/KVM-PPC specific hcalls */ spapr_register_hypercall(KVMPPC_H_RTAS, h_rtas); + /* qemu/scm specific hcalls */ + spapr_register_hypercall(H_SCM_READ_METADATA, h_scm_read_metadata); + spapr_register_hypercall(H_SCM_WRITE_METADATA, h_scm_write_metadata); + spapr_register_hypercall(H_SCM_BIND_MEM, h_scm_bind_mem); + spapr_register_hypercall(H_SCM_UNBIND_MEM, h_scm_unbind_mem); + spapr_register_hypercall(H_SCM_QUERY_BLOCK_MEM_BINDING, + h_scm_query_block_mem_binding); + spapr_register_hypercall(H_SCM_QUERY_LOGICAL_MEM_BINDING, + h_scm_query_logical_mem_binding); + spapr_register_hypercall(H_SCM_MEM_QUERY, h_scm_mem_query); + /* ibm,client-architecture-support support */ spapr_register_hypercall(KVMPPC_H_CAS, h_client_architecture_support); diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h index 21a9709afe..28249567f4 100644 --- a/include/hw/ppc/spapr.h +++ b/include/hw/ppc/spapr.h @@ -268,6 +268,7 @@ struct sPAPRMachineState { #define H_P7 -60 #define H_P8 -61 #define H_P9 -62 +#define H_OVERLAP -68 #define H_UNSUPPORTED_FLAG -256 #define H_MULTI_THREADS_ACTIVE -9005 @@ -473,8 +474,15 @@ struct sPAPRMachineState { #define H_INT_ESB 0x3C8 #define H_INT_SYNC 0x3CC #define H_INT_RESET 0x3D0 - -#define MAX_HCALL_OPCODE H_INT_RESET +#define H_SCM_READ_METADATA 0x3E4 +#define H_SCM_WRITE_METADATA 0x3E8 +#define H_SCM_BIND_MEM 0x3EC +#define H_SCM_UNBIND_MEM 0x3F0 +#define H_SCM_QUERY_BLOCK_MEM_BINDING 0x3F4 +#define H_SCM_QUERY_LOGICAL_MEM_BINDING 0x3F8 +#define H_SCM_MEM_QUERY 0x3FC + +#define MAX_HCALL_OPCODE H_SCM_MEM_QUERY /* The hcalls above are standardized in PAPR and implemented by pHyp * as well.
This patch implements few of the necessary hcalls for the nvdimm support. PAPR semantics is such that each NVDIMM device is comprising of multiple SCM(Storage Class Memory) blocks. The guest requests the hypervisor to bind each of the SCM blocks of the NVDIMM device using hcalls. There can be SCM block unbind requests in case of driver errors or unplug(not supported now) use cases. The NVDIMM label read/writes are done through hcalls. Since each virtual NVDIMM device is divided into multiple SCM blocks, the bind, unbind, and queries using hcalls on those blocks can come independently. This doesn't fit well into the qemu device semantics, where the map/unmap are done at the (whole)device/object level granularity. The patch doesnt actually bind/unbind on hcalls but let it happen at the object_add/del phase itself instead. The guest kernel makes bind/unbind requests for the virtual NVDIMM device at the region level granularity. Without interleaving, each virtual NVDIMM device is presented as separate region. There is no way to configure the virtual NVDIMM interleaving for the guests today. So, there is no way a partial bind/unbind request can come for the vNVDIMM in a hcall for a subset of SCM blocks of a virtual NVDIMM. Hence it is safe to do bind/unbind everything during the object_add/del. The kernel today is not using the hcalls - h_scm_mem_query, h_scm_mem_clear, h_scm_query_logical_mem_binding and h_scm_query_block_mem_binding. They are just stubs in this patch. Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> --- hw/ppc/spapr_hcall.c | 230 ++++++++++++++++++++++++++++++++++++++++++++++++ include/hw/ppc/spapr.h | 12 ++- 2 files changed, 240 insertions(+), 2 deletions(-)