| Message ID | 20190122225405.7815-1-laurent.pinchart+renesas@ideasonboard.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | R-Car DU DPAD support for D3 and E3 | expand |
Hi Laurent > For your convenience the patches are available from > > git://linuxtv.org/pinchartl/media.git drm/du/d3e3 It seems we can't find this branch/tag on your branch Is it removed ? or not yet pushed ? https://git.linuxtv.org/pinchartl/media.git/refs/heads Best regards --- Kuninori Morimoto
Hi Morimoto-san, On Mon, Feb 25, 2019 at 04:44:55PM +0900, Kuninori Morimoto wrote: > > Hi Laurent > > > For your convenience the patches are available from > > > > git://linuxtv.org/pinchartl/media.git drm/du/d3e3 > > It seems we can't find this branch/tag on your branch > Is it removed ? or not yet pushed ? > > https://git.linuxtv.org/pinchartl/media.git/refs/heads The branch has been merged to drm-next (for the DU driver part) and to Simon's next branch (for the DT part), so I've removed it from my tree. You can find a merge of those two branches in my repository in the drm/du/base branch.
Hi Laurent > > > For your convenience the patches are available from > > > > > > git://linuxtv.org/pinchartl/media.git drm/du/d3e3 > > > > It seems we can't find this branch/tag on your branch > > Is it removed ? or not yet pushed ? > > > > https://git.linuxtv.org/pinchartl/media.git/refs/heads > > The branch has been merged to drm-next (for the DU driver part) and to > Simon's next branch (for the DT part), so I've removed it from my tree. > You can find a merge of those two branches in my repository in the > drm/du/base branch. OK, Thanks. Nice to know Best regards --- Kuninori Morimoto
Hello, This series adds support for the DPAD0 output for the D3 and E3 SoCs. On the Draak and Ebisu boards, DPAD0 is used for the VGA output. Patches 1/6 and 2/6 prepare the grounds by successfully probing LVDS encoders that have no connected output. This is required in order to provide a dot clock to the DPAD output, as on the D3 and E3 SoCs the dot clock is provided by the LVDS encoders. Patch 3/6 then adds an API to the LVDS encoder driver to control the LVDS output clock independently of the LVDS encoder itself, and patch 4/6 makes use of that API to control the clock from the DU driver. Patches 5/6 and 6/6 finally enable the LVDS1 encoders in the Ebisu and Draak boards DTs, required to operate the HDMI (out of LVDS0) and VGA (using the LVDS1 dot clock) together. Changes compared to v1 are minor and include compilation fixes (in patch 3/6), typo fixes and additional comments in the DT files. The patches have been tested on Draak only as I don't have access to an Ebisu board, but they should work equally well on both boards. For your convenience the patches are available from git://linuxtv.org/pinchartl/media.git drm/du/d3e3 Laurent Pinchart (6): drm: rcar-du: Simplify encoder registration drm: rcar-du: lvds: Don't fail probe if output is not connected on D3/E3 drm: rcar-du: lvds: Add API to enable/disable clock output drm: rcar-du: Turn LVDS clock output on/off for DPAD0 output on D3/E3 arm64: dts: renesas: r8a77990: ebisu: Enable LVDS1 encoder arm64: dts: renesas: r8a77995: draak: Enable LVDS1 encoder .../arm64/boot/dts/renesas/r8a77990-ebisu.dts | 2 + .../arm64/boot/dts/renesas/r8a77995-draak.dts | 7 ++ drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/rcar-du/Kconfig | 1 + drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 34 +++++++ drivers/gpu/drm/rcar-du/rcar_du_drv.h | 3 + drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 4 +- drivers/gpu/drm/rcar-du/rcar_du_encoder.h | 3 +- drivers/gpu/drm/rcar-du/rcar_du_kms.c | 52 +--------- drivers/gpu/drm/rcar-du/rcar_lvds.c | 94 ++++++++++++++++--- drivers/gpu/drm/rcar-du/rcar_lvds.h | 27 ++++++ 11 files changed, 164 insertions(+), 65 deletions(-) create mode 100644 drivers/gpu/drm/rcar-du/rcar_lvds.h