diff mbox series

[1/2] USB: gadget: pxa25x: Add DT bindings

Message ID 20190202235908.30751-1-linus.walleij@linaro.org (mailing list archive)
State New, archived
Headers show
Series [1/2] USB: gadget: pxa25x: Add DT bindings | expand

Commit Message

Linus Walleij Feb. 2, 2019, 11:59 p.m. UTC 
This adds device tree bindings for the PXA25x USB Device
Controller as found in the PXA25x and the IXP4xx.

Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 .../devicetree/bindings/usb/pxa25x-udc.txt    | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/pxa25x-udc.txt

Comments

Rob Herring (Arm) Feb. 25, 2019, 9:23 p.m. UTC | #1 
On Sun, Feb 03, 2019 at 12:59:07AM +0100, Linus Walleij wrote:
> This adds device tree bindings for the PXA25x USB Device
> Controller as found in the PXA25x and the IXP4xx.
> 
> Cc: Robert Jarzmik <robert.jarzmik@free.fr>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>  .../devicetree/bindings/usb/pxa25x-udc.txt    | 27 +++++++++++++++++++
>  1 file changed, 27 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/pxa25x-udc.txt
> 
> diff --git a/Documentation/devicetree/bindings/usb/pxa25x-udc.txt b/Documentation/devicetree/bindings/usb/pxa25x-udc.txt
> new file mode 100644
> index 000000000000..bbdbe0df3565
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/pxa25x-udc.txt
> @@ -0,0 +1,27 @@
> +PXA25x UDC (USB Device Controller)
> +
> +The PXA25x and IXP4xx USB Device Controller is different from the
> +PXA27x UDC described in pxa-usb.txt and is compatible between the
> +Marvell PXA25x and the Intel IXP4xx devices.
> +
> +Required properties:
> + - compatible: Should be one of
> +   "marvell,pxa25x-udc"

Look at the 'has_cfr' flag in the driver. You should have 250 and 255 
compatible strings to distinguish. That would get rid of the assembly 
instruction helping towards building on !ARM.

> +   "intel,ixp4xx-udc"
> +   for USB controllers used in device mode.
> + - reg: usb device MMIO address space
> + - interrupts: single interrupt generated by the UDC IP
> + - clocks: input clock of the UDC IP (see clock-bindings.txt)
> +
> +Optional properties:
> + - gpios:
> +   - gpio activated to control the USB D+ pullup (see gpio.txt)

This really should be part of a connector. Also, the Lubbock board is 
different.

> +
> +Example:
> +
> +usb@c800b000 {
> +	compatible = "intel,ixp4xx-udc";
> +	reg = <0xc800b000 0x1000>;
> +	interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
> +	clocks = <&pclk 0>;
> +};
> -- 
> 2.20.1
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/pxa25x-udc.txt b/Documentation/devicetree/bindings/usb/pxa25x-udc.txt
new file mode 100644
index 000000000000..bbdbe0df3565
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/pxa25x-udc.txt
@@ -0,0 +1,27 @@ 
+PXA25x UDC (USB Device Controller)
+
+The PXA25x and IXP4xx USB Device Controller is different from the
+PXA27x UDC described in pxa-usb.txt and is compatible between the
+Marvell PXA25x and the Intel IXP4xx devices.
+
+Required properties:
+ - compatible: Should be one of
+   "marvell,pxa25x-udc"
+   "intel,ixp4xx-udc"
+   for USB controllers used in device mode.
+ - reg: usb device MMIO address space
+ - interrupts: single interrupt generated by the UDC IP
+ - clocks: input clock of the UDC IP (see clock-bindings.txt)
+
+Optional properties:
+ - gpios:
+   - gpio activated to control the USB D+ pullup (see gpio.txt)
+
+Example:
+
+usb@c800b000 {
+	compatible = "intel,ixp4xx-udc";
+	reg = <0xc800b000 0x1000>;
+	interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&pclk 0>;
+};