diff mbox series

[2/2] ARM: dts: imx53: Add Menlosystems M53 board

Message ID 20181004224227.16836-2-marex@denx.de (mailing list archive)
State New, archived
Headers show
Series [1/2] of: Add vendor prefix for Menlo Systems GmbH | expand

Commit Message

Marek Vasut Oct. 4, 2018, 10:42 p.m. UTC
Add device tree for the Menlosystems board based on i.MX53 M53 SoM.

Signed-off-by: Marek Vasut <marex@denx.de>
---
 arch/arm/boot/dts/Makefile           |   1 +
 arch/arm/boot/dts/imx53-m53menlo.dts | 327 +++++++++++++++++++++++++++
 2 files changed, 328 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx53-m53menlo.dts

Comments

Marek Vasut Feb. 18, 2019, 12:04 p.m. UTC | #1
On 10/5/18 12:42 AM, Marek Vasut wrote:
> Add device tree for the Menlosystems board based on i.MX53 M53 SoM.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>

Shawn, bump ?

> ---
>  arch/arm/boot/dts/Makefile           |   1 +
>  arch/arm/boot/dts/imx53-m53menlo.dts | 327 +++++++++++++++++++++++++++
>  2 files changed, 328 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx53-m53menlo.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index b0e966d625b9..731fc7de76b3 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -376,6 +376,7 @@ dtb-$(CONFIG_SOC_IMX53) += \
>  	imx53-kp-ddc.dtb \
>  	imx53-kp-hsc.dtb \
>  	imx53-m53evk.dtb \
> +	imx53-m53menlo.dtb \
>  	imx53-mba53.dtb \
>  	imx53-ppd.dtb \
>  	imx53-qsb.dtb \
> diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
> new file mode 100644
> index 000000000000..405a57ad01a7
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx53-m53menlo.dts
> @@ -0,0 +1,327 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2017 Marek Vasut <marex@denx.de>
> + */
> +
> +/dts-v1/;
> +#include "imx53-m53.dtsi"
> +
> +/ {
> +	model = "MENLO M53 EMBEDDED DEVICE";
> +	compatible = "fsl,imx53";
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&led_pin_gpio>;
> +
> +		user1 {
> +			label = "TestLed601";
> +			gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "mmc0";
> +		};
> +
> +		user2 {
> +			label = "TestLed602";
> +			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +
> +		eth {
> +			label = "EthLedYe";
> +			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "none";
> +		};
> +	};
> +
> +	panel {
> +		compatible = "edt,etm070080dh6";
> +		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
> +
> +		port {
> +			panel_in: endpoint {
> +				remote-endpoint = <&lvds0_out>;
> +			};
> +		};
> +	};
> +
> +	regulators {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		reg_usbh1_vbus: regulator@3 {
> +			compatible = "regulator-fixed";
> +			reg = <3>;
> +			regulator-name = "vbus";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			gpio = <&gpio1 2 0>;
> +		};
> +	};
> +};
> +
> +&can1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_can1>;
> +	status = "okay";
> +};
> +
> +&can2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_can2>;
> +	status = "okay";
> +};
> +
> +&clks {
> +	assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
> +			  <&clks IMX5_CLK_CKO1_PODF>,
> +			  <&clks IMX5_CLK_CKO1>;
> +	assigned-clock-parents = <&clks IMX5_CLK_AHB>;
> +	assigned-clock-rates = <133333334>, <33333334>, <33333334>;
> +};
> +
> +&esdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_esdhc1>;
> +	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
> +	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> +	status = "okay";
> +};
> +
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_fec>;
> +	phy-mode = "rmii";
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";
> +
> +	edt-ft5x06@38 {
> +		compatible = "edt,edt-ft5x06";
> +		reg = <0x38>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_edt_ft5x06>;
> +		interrupt-parent = <&gpio6>;
> +		interrupts = <5 GPIO_ACTIVE_LOW>;
> +		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
> +		wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	eeprom@50 {
> +		compatible = "atmel,24c64";
> +		reg = <0x50>;
> +		pagesize = <32>;
> +	};
> +
> +	dac@60 {
> +		compatible = "microchip,mcp4725";
> +		reg = <0x60>;
> +	};
> +};
> +
> +&i2c2 {
> +	stmpe610@41 {
> +		status = "disabled";
> +	};
> +};
> +
> +&i2c3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c3>;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hog>;
> +
> +	imx53-m53evk {
> +		hoggrp {
> +			fsl,pins = <
> +				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
> +				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
> +				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
> +				MX53_PAD_GPIO_19__CCM_CLKO		0x1d5
> +				MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK	0x1d5
> +				MX53_PAD_CSI0_DAT4__GPIO5_22		0x1d5
> +				MX53_PAD_CSI0_DAT5__GPIO5_23		0x1d5
> +				MX53_PAD_CSI0_DAT6__GPIO5_24		0x1d5
> +				MX53_PAD_CSI0_DAT7__GPIO5_25		0x1d5
> +				MX53_PAD_CSI0_DAT8__GPIO5_26		0x1d5
> +				MX53_PAD_CSI0_DAT9__GPIO5_27		0x1d5
> +				MX53_PAD_CSI0_DAT10__GPIO5_28		0x1d5
> +				MX53_PAD_CSI0_DAT11__GPIO5_29		0x1d5
> +				MX53_PAD_CSI0_DAT14__GPIO6_0		0x1d5
> +			>;
> +		};
> +
> +		led_pin_gpio: led_gpio@0 {
> +			fsl,pins = <
> +				MX53_PAD_CSI0_DAT15__GPIO6_1		0x1d5
> +				MX53_PAD_CSI0_DAT16__GPIO6_2		0x1d5
> +			>;
> +		};
> +
> +		pinctrl_can1: can1grp {
> +			fsl,pins = <
> +				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
> +				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
> +			>;
> +		};
> +
> +		pinctrl_can2: can2grp {
> +			fsl,pins = <
> +				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
> +				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
> +			>;
> +		};
> +
> +		pinctrl_display_gpio: display-gpiogrp {
> +			fsl,pins = <
> +				MX53_PAD_CSI0_DAT12__GPIO5_30		0x1d5 /* Reset */
> +				MX53_PAD_CSI0_DAT13__GPIO5_31		0x1d5 /* Interrupt */
> +			>;
> +		};
> +
> +		pinctrl_edt_ft5x06: edt-ft5x06grp {
> +			fsl,pins = <
> +				MX53_PAD_PATA_DATA9__GPIO2_9		0x1d5 /* Reset */
> +				MX53_PAD_CSI0_DAT19__GPIO6_5		0x1d5 /* Interrupt */
> +				MX53_PAD_PATA_DATA10__GPIO2_10		0x1d5 /* Wake */
> +			>;
> +		};
> +
> +		pinctrl_esdhc1: esdhc1grp {
> +			fsl,pins = <
> +				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
> +				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
> +				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
> +				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
> +				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
> +				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
> +			>;
> +		};
> +
> +		pinctrl_fec: fecgrp {
> +			fsl,pins = <
> +				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
> +				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
> +				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
> +				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
> +				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
> +				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
> +				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
> +				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
> +				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
> +				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
> +			>;
> +		};
> +
> +		pinctrl_i2c1: i2c1grp {
> +			fsl,pins = <
> +				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
> +				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
> +			>;
> +		};
> +
> +		pinctrl_i2c3: i2c3grp {
> +			fsl,pins = <
> +				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
> +				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
> +			>;
> +		};
> +
> +		pinctrl_lvds0: lvds0grp {
> +			fsl,pins = <
> +				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
> +				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
> +				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
> +				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
> +				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
> +			>;
> +		};
> +
> +		pinctrl_power_button_gpio: powerbutgrp {
> +			fsl,pins = <
> +				MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x1d5
> +			>;
> +		};
> +
> +		pinctrl_power_out_gpio: poweroutgrp {
> +			fsl,pins = <
> +				MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x1d5
> +			>;
> +		};
> +
> +		pinctrl_uart1: uart1grp {
> +			fsl,pins = <
> +				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
> +				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
> +			>;
> +		};
> +
> +		pinctrl_uart2: uart2grp {
> +			fsl,pins = <
> +				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
> +				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
> +			>;
> +		};
> +
> +		pinctrl_usb: usbgrp {
> +			fsl,pins = <
> +				MX53_PAD_GPIO_2__GPIO1_2		0x80000000
> +				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x80000000
> +			>;
> +		};
> +	};
> +};
> +
> +&ldb {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_lvds0>;
> +	status = "okay";
> +
> +	lvds0: lvds-channel@0 {
> +		fsl,data-mapping = "spwg";
> +		fsl,data-width = <18>;
> +		status = "okay";
> +
> +		port@2 {
> +			reg = <2>;
> +			lvds0_out: endpoint {
> +				remote-endpoint = <&panel_in>;
> +			};
> +		};
> +	};
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	status = "okay";
> +};
> +
> +&usbh1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usb>;
> +	vbus-supply = <&reg_usbh1_vbus>;
> +	phy_type = "utmi";
> +	dr_mode = "peripheral";
> +	status = "okay";
> +};
> +
> +&usbotg {
> +	dr_mode = "peripheral";
> +	status = "okay";
> +};
>
Shawn Guo Feb. 28, 2019, 2:37 p.m. UTC | #2
On Mon, Feb 18, 2019 at 01:04:36PM +0100, Marek Vasut wrote:
> On 10/5/18 12:42 AM, Marek Vasut wrote:
> > Add device tree for the Menlosystems board based on i.MX53 M53 SoM.
> > 
> > Signed-off-by: Marek Vasut <marex@denx.de>
> 
> Shawn, bump ?

Please resend it to recipients that scripts/get_maintainer.pl gives.

Shawn
Marek Vasut March 2, 2019, 2:52 p.m. UTC | #3
On 2/28/19 3:37 PM, Shawn Guo wrote:
> On Mon, Feb 18, 2019 at 01:04:36PM +0100, Marek Vasut wrote:
>> On 10/5/18 12:42 AM, Marek Vasut wrote:
>>> Add device tree for the Menlosystems board based on i.MX53 M53 SoM.
>>>
>>> Signed-off-by: Marek Vasut <marex@denx.de>
>>
>> Shawn, bump ?
> 
> Please resend it to recipients that scripts/get_maintainer.pl gives.

Thank you for the useful feedback.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b0e966d625b9..731fc7de76b3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -376,6 +376,7 @@  dtb-$(CONFIG_SOC_IMX53) += \
 	imx53-kp-ddc.dtb \
 	imx53-kp-hsc.dtb \
 	imx53-m53evk.dtb \
+	imx53-m53menlo.dtb \
 	imx53-mba53.dtb \
 	imx53-ppd.dtb \
 	imx53-qsb.dtb \
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
new file mode 100644
index 000000000000..405a57ad01a7
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -0,0 +1,327 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx53-m53.dtsi"
+
+/ {
+	model = "MENLO M53 EMBEDDED DEVICE";
+	compatible = "fsl,imx53";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio>;
+
+		user1 {
+			label = "TestLed601";
+			gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user2 {
+			label = "TestLed602";
+			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		eth {
+			label = "EthLedYe";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+	};
+
+	panel {
+		compatible = "edt,etm070080dh6";
+		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usbh1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 2 0>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
+			  <&clks IMX5_CLK_CKO1_PODF>,
+			  <&clks IMX5_CLK_CKO1>;
+	assigned-clock-parents = <&clks IMX5_CLK_AHB>;
+	assigned-clock-rates = <133333334>, <33333334>, <33333334>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <5 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	dac@60 {
+		compatible = "microchip,mcp4725";
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	stmpe610@41 {
+		status = "disabled";
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-m53evk {
+		hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
+				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
+				MX53_PAD_GPIO_19__CCM_CLKO		0x1d5
+				MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK	0x1d5
+				MX53_PAD_CSI0_DAT4__GPIO5_22		0x1d5
+				MX53_PAD_CSI0_DAT5__GPIO5_23		0x1d5
+				MX53_PAD_CSI0_DAT6__GPIO5_24		0x1d5
+				MX53_PAD_CSI0_DAT7__GPIO5_25		0x1d5
+				MX53_PAD_CSI0_DAT8__GPIO5_26		0x1d5
+				MX53_PAD_CSI0_DAT9__GPIO5_27		0x1d5
+				MX53_PAD_CSI0_DAT10__GPIO5_28		0x1d5
+				MX53_PAD_CSI0_DAT11__GPIO5_29		0x1d5
+				MX53_PAD_CSI0_DAT14__GPIO6_0		0x1d5
+			>;
+		};
+
+		led_pin_gpio: led_gpio@0 {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT15__GPIO6_1		0x1d5
+				MX53_PAD_CSI0_DAT16__GPIO6_2		0x1d5
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
+				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_display_gpio: display-gpiogrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT12__GPIO5_30		0x1d5 /* Reset */
+				MX53_PAD_CSI0_DAT13__GPIO5_31		0x1d5 /* Interrupt */
+			>;
+		};
+
+		pinctrl_edt_ft5x06: edt-ft5x06grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA9__GPIO2_9		0x1d5 /* Reset */
+				MX53_PAD_CSI0_DAT19__GPIO6_5		0x1d5 /* Interrupt */
+				MX53_PAD_PATA_DATA10__GPIO2_10		0x1d5 /* Wake */
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
+				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_lvds0: lvds0grp {
+			fsl,pins = <
+				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
+				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
+				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
+				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
+				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
+			>;
+		};
+
+		pinctrl_power_button_gpio: powerbutgrp {
+			fsl,pins = <
+				MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x1d5
+			>;
+		};
+
+		pinctrl_power_out_gpio: poweroutgrp {
+			fsl,pins = <
+				MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x1d5
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_usb: usbgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_2__GPIO1_2		0x80000000
+				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x80000000
+			>;
+		};
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@2 {
+			reg = <2>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb>;
+	vbus-supply = <&reg_usbh1_vbus>;
+	phy_type = "utmi";
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};