diff mbox series

[1/8] dt-bindings: phy: Add Amlogic G12A USB2 PHY Bindings

Message ID 20190212151413.24632-2-narmstrong@baylibre.com (mailing list archive)
State Superseded
Headers show
Series arm64: meson: Add support for USB on Amlogic G12A | expand

Commit Message

Neil Armstrong Feb. 12, 2019, 3:14 p.m. UTC 
Add the Amlogic G12A Family USB2 OTG PHY Bindings

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../bindings/phy/meson-g12a-usb2-phy.txt      | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt

Comments

Martin Blumenstingl Feb. 17, 2019, 9:58 p.m. UTC | #1 
On Tue, Feb 12, 2019 at 4:14 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add the Amlogic G12A Family USB2 OTG PHY Bindings
nit-pick: if you want to keep "OTG" in there then please add a short
description how OTG works on this PHY.
I would describe this as: "Add the Amlogic G12A Family USB2 PHY
Bindings. The PHY works for host or peripheral modes. Configuration of
the mode is part of the USBCTRL registers which are outside of the PHY
registers."

> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
with the patch description nit-pick addressed:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>


Regards
Martin
Rob Herring (Arm) Feb. 28, 2019, 3:18 p.m. UTC | #2 
On Tue, 12 Feb 2019 16:14:06 +0100, Neil Armstrong wrote:
> Add the Amlogic G12A Family USB2 OTG PHY Bindings
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../bindings/phy/meson-g12a-usb2-phy.txt      | 22 +++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt
new file mode 100644
index 000000000000..a6ebc3dea159
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt
@@ -0,0 +1,22 @@ 
+* Amlogic G12A USB2 PHY binding
+
+Required properties:
+- compatible:	Should be "amlogic,meson-g12a-usb2-phy"
+- reg:		The base address and length of the registers
+- #phys-cells:	must be 0 (see phy-bindings.txt in this directory)
+- clocks:	a phandle to the clock of this PHY
+- clock-names:	must be "xtal"
+- resets:	a phandle to the reset line of this PHY
+- reset-names:	must be "phy"
+- phy-supply:	see phy-bindings.txt in this directory
+
+Example:
+	usb2_phy0: phy@36000 {
+		compatible = "amlogic,g12a-usb2-phy";
+		reg = <0x0 0x36000 0x0 0x2000>;
+		clocks = <&xtal>;
+		clock-names = "xtal";
+		resets = <&reset RESET_USB_PHY21>;
+		reset-names = "phy";
+		#phy-cells = <0>;
+	};