diff mbox series

usb: introduce usb_ep_type_string() function

Message ID e2ff70a3608dce315b52aea710398ba79d0f6f93.1551422947.git.chunfeng.yun@mediatek.com (mailing list archive)
State Superseded
Headers show
Series usb: introduce usb_ep_type_string() function | expand

Commit Message

Chunfeng Yun (云春峰) March 1, 2019, 6:58 a.m. UTC
In some places, the code prints a human-readable USB endpoint
transfer type (e.g. "bulk"). This involves a switch statement
sometimes wrapped around in ({ ... }) block leading to code
repetition.
To make this scenario easier, here introduces usb_ep_type_string()
function, which returns a human-readable name of provided
endpoint type.
It also changes a few places switch was used to use this
new function.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/usb/common/common.c              | 16 ++++++++++++++++
 drivers/usb/core/endpoint.c              | 18 ++----------------
 drivers/usb/core/hcd.c                   | 17 ++---------------
 drivers/usb/dwc3/debugfs.c               | 23 ++++-------------------
 drivers/usb/gadget/udc/aspeed-vhub/epn.c |  6 +-----
 drivers/usb/gadget/udc/dummy_hcd.c       | 16 +---------------
 drivers/usb/host/xhci-trace.h            | 19 ++-----------------
 include/linux/usb/ch9.h                  |  8 ++++++++
 8 files changed, 36 insertions(+), 87 deletions(-)

Comments

Greg Kroah-Hartman March 1, 2019, 4:21 p.m. UTC | #1
On Fri, Mar 01, 2019 at 02:58:23PM +0800, Chunfeng Yun wrote:
> In some places, the code prints a human-readable USB endpoint
> transfer type (e.g. "bulk"). This involves a switch statement
> sometimes wrapped around in ({ ... }) block leading to code
> repetition.
> To make this scenario easier, here introduces usb_ep_type_string()
> function, which returns a human-readable name of provided
> endpoint type.
> It also changes a few places switch was used to use this
> new function.
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
>  drivers/usb/common/common.c              | 16 ++++++++++++++++
>  drivers/usb/core/endpoint.c              | 18 ++----------------
>  drivers/usb/core/hcd.c                   | 17 ++---------------
>  drivers/usb/dwc3/debugfs.c               | 23 ++++-------------------
>  drivers/usb/gadget/udc/aspeed-vhub/epn.c |  6 +-----
>  drivers/usb/gadget/udc/dummy_hcd.c       | 16 +---------------
>  drivers/usb/host/xhci-trace.h            | 19 ++-----------------
>  include/linux/usb/ch9.h                  |  8 ++++++++
>  8 files changed, 36 insertions(+), 87 deletions(-)
> 
> diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
> index 48277bbc15e4..2174dd9ec176 100644
> --- a/drivers/usb/common/common.c
> +++ b/drivers/usb/common/common.c
> @@ -16,6 +16,22 @@
>  #include <linux/usb/otg.h>
>  #include <linux/of_platform.h>
>  
> +static const char *const ep_type_names[] = {
> +	[USB_ENDPOINT_XFER_CONTROL] = "ctrl",
> +	[USB_ENDPOINT_XFER_ISOC] = "isoc",
> +	[USB_ENDPOINT_XFER_BULK] = "bulk",
> +	[USB_ENDPOINT_XFER_INT] = "intr",
> +};
> +
> +const char *usb_ep_type_string(int ep_type)
> +{
> +	if (ep_type < 0 || ep_type >= ARRAY_SIZE(ep_type_names))
> +		return "unknown";
> +
> +	return ep_type_names[ep_type];
> +}
> +EXPORT_SYMBOL_GPL(usb_ep_type_string);
> +
>  const char *usb_otg_state_string(enum usb_otg_state state)
>  {
>  	static const char *const names[] = {
> diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
> index 1c2c04079676..afa43f9a47b2 100644
> --- a/drivers/usb/core/endpoint.c
> +++ b/drivers/usb/core/endpoint.c
> @@ -60,23 +60,9 @@ static ssize_t type_show(struct device *dev, struct device_attribute *attr,
>  			 char *buf)
>  {
>  	struct ep_device *ep = to_ep_device(dev);
> -	char *type = "unknown";
> +	int ep_type = usb_endpoint_type(ep->desc);
>  
> -	switch (usb_endpoint_type(ep->desc)) {
> -	case USB_ENDPOINT_XFER_CONTROL:
> -		type = "Control";
> -		break;
> -	case USB_ENDPOINT_XFER_ISOC:
> -		type = "Isoc";
> -		break;
> -	case USB_ENDPOINT_XFER_BULK:
> -		type = "Bulk";
> -		break;
> -	case USB_ENDPOINT_XFER_INT:
> -		type = "Interrupt";
> -		break;
> -	}
> -	return sprintf(buf, "%s\n", type);
> +	return sprintf(buf, "%s\n", usb_ep_type_string(ep_type));

You just changed a user/kernel API here, the strings are now different
from what they used to be :(

That's not ok, odds are you will break tools if you do this.

>  }
>  static DEVICE_ATTR_RO(type);
>  
> diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
> index 015b126ce455..193ee92b2fdb 100644
> --- a/drivers/usb/core/hcd.c
> +++ b/drivers/usb/core/hcd.c
> @@ -1875,23 +1875,10 @@ void usb_hcd_flush_endpoint(struct usb_device *udev,
>  		/* kick hcd */
>  		unlink1(hcd, urb, -ESHUTDOWN);
>  		dev_dbg (hcd->self.controller,
> -			"shutdown urb %pK ep%d%s%s\n",
> +			"shutdown urb %pK ep%d%s-%s\n",
>  			urb, usb_endpoint_num(&ep->desc),
>  			is_in ? "in" : "out",
> -			({	char *s;
> -
> -				 switch (usb_endpoint_type(&ep->desc)) {
> -				 case USB_ENDPOINT_XFER_CONTROL:
> -					s = ""; break;
> -				 case USB_ENDPOINT_XFER_BULK:
> -					s = "-bulk"; break;
> -				 case USB_ENDPOINT_XFER_INT:
> -					s = "-intr"; break;
> -				 default:
> -					s = "-iso"; break;
> -				};
> -				s;
> -			}));
> +			usb_ep_type_string(usb_endpoint_type(&ep->desc)));

You also changed the message here for control endpoints, but that's not
a big deal, it's ok.

>  		usb_put_urb (urb);
>  
>  		/* list contents may have changed */
> diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
> index 1c792710348f..d9e2a63835fe 100644
> --- a/drivers/usb/dwc3/debugfs.c
> +++ b/drivers/usb/dwc3/debugfs.c
> @@ -750,28 +750,13 @@ static int dwc3_transfer_type_show(struct seq_file *s, void *unused)
>  	unsigned long		flags;
>  
>  	spin_lock_irqsave(&dwc->lock, flags);
> -	if (!(dep->flags & DWC3_EP_ENABLED) ||
> -			!dep->endpoint.desc) {
> -		seq_printf(s, "--\n");
> +	if (!(dep->flags & DWC3_EP_ENABLED) || !dep->endpoint.desc) {
> +		seq_puts(s, "unknown\n");
>  		goto out;
>  	}
>  
> -	switch (usb_endpoint_type(dep->endpoint.desc)) {
> -	case USB_ENDPOINT_XFER_CONTROL:
> -		seq_printf(s, "control\n");
> -		break;
> -	case USB_ENDPOINT_XFER_ISOC:
> -		seq_printf(s, "isochronous\n");
> -		break;
> -	case USB_ENDPOINT_XFER_BULK:
> -		seq_printf(s, "bulk\n");
> -		break;
> -	case USB_ENDPOINT_XFER_INT:
> -		seq_printf(s, "interrupt\n");
> -		break;
> -	default:
> -		seq_printf(s, "--\n");
> -	}
> +	seq_printf(s, "%s\n",
> +		   usb_ep_type_string(usb_endpoint_type(dep->endpoint.desc)));

It is debugfs, so no real API guarantees at all, but you did change the
output format, and that's not always good.

>  
>  out:
>  	spin_unlock_irqrestore(&dwc->lock, flags);
> diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
> index 4a28e3fbeb0b..165b0a43670e 100644
> --- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c
> +++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
> @@ -593,10 +593,6 @@ static int ast_vhub_epn_disable(struct usb_ep* u_ep)
>  static int ast_vhub_epn_enable(struct usb_ep* u_ep,
>  			       const struct usb_endpoint_descriptor *desc)
>  {
> -	static const char *ep_type_string[] __maybe_unused = { "ctrl",
> -							       "isoc",
> -							       "bulk",
> -							       "intr" };
>  	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
>  	struct ast_vhub_dev *dev;
>  	struct ast_vhub *vhub;
> @@ -646,7 +642,7 @@ static int ast_vhub_epn_enable(struct usb_ep* u_ep,
>  	ep->epn.wedged = false;
>  
>  	EPDBG(ep, "Enabling [%s] %s num %d maxpacket=%d\n",
> -	      ep->epn.is_in ? "in" : "out", ep_type_string[type],
> +	      ep->epn.is_in ? "in" : "out", usb_ep_type_string(type),
>  	      usb_endpoint_num(desc), maxpacket);
>  
>  	/* Can we use DMA descriptor mode ? */
> diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
> index baf72f95f0f1..40c6a484e232 100644
> --- a/drivers/usb/gadget/udc/dummy_hcd.c
> +++ b/drivers/usb/gadget/udc/dummy_hcd.c
> @@ -617,21 +617,7 @@ static int dummy_enable(struct usb_ep *_ep,
>  		_ep->name,
>  		desc->bEndpointAddress & 0x0f,
>  		(desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
> -		({ char *val;
> -		 switch (usb_endpoint_type(desc)) {
> -		 case USB_ENDPOINT_XFER_BULK:
> -			 val = "bulk";
> -			 break;
> -		 case USB_ENDPOINT_XFER_ISOC:
> -			 val = "iso";
> -			 break;
> -		 case USB_ENDPOINT_XFER_INT:
> -			 val = "intr";
> -			 break;
> -		 default:
> -			 val = "ctrl";
> -			 break;
> -		 } val; }),
> +		usb_ep_type_string(usb_endpoint_type(desc)),
>  		max, ep->stream_en ? "enabled" : "disabled");
>  
>  	/* at this point real hardware should be NAKing transfers
> diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h
> index 88b427434bd8..bac73d688f11 100644
> --- a/drivers/usb/host/xhci-trace.h
> +++ b/drivers/usb/host/xhci-trace.h
> @@ -289,23 +289,8 @@ DECLARE_EVENT_CLASS(xhci_log_urb,
>  	),
>  	TP_printk("ep%d%s-%s: urb %p pipe %u slot %d length %d/%d sgs %d/%d stream %d flags %08x",
>  			__entry->epnum, __entry->dir_in ? "in" : "out",
> -			({ char *s;
> -			switch (__entry->type) {
> -			case USB_ENDPOINT_XFER_INT:
> -				s = "intr";
> -				break;
> -			case USB_ENDPOINT_XFER_CONTROL:
> -				s = "control";
> -				break;
> -			case USB_ENDPOINT_XFER_BULK:
> -				s = "bulk";
> -				break;
> -			case USB_ENDPOINT_XFER_ISOC:
> -				s = "isoc";
> -				break;
> -			default:
> -				s = "UNKNOWN";
> -			} s; }), __entry->urb, __entry->pipe, __entry->slot_id,
> +			usb_ep_type_string(__entry->type),
> +			__entry->urb, __entry->pipe, __entry->slot_id,
>  			__entry->actual, __entry->length, __entry->num_mapped_sgs,
>  			__entry->num_sgs, __entry->stream, __entry->flags
>  		)

Another api change with "control" :(

I like the idea, but you can not break user/kernel apis like this
without knowing the affects that could happen.

thanks,

greg k-h
Chunfeng Yun (云春峰) March 5, 2019, 2:22 a.m. UTC | #2
Hi,
On Fri, 2019-03-01 at 17:21 +0100, Greg Kroah-Hartman wrote:
> On Fri, Mar 01, 2019 at 02:58:23PM +0800, Chunfeng Yun wrote:
> > In some places, the code prints a human-readable USB endpoint
> > transfer type (e.g. "bulk"). This involves a switch statement
> > sometimes wrapped around in ({ ... }) block leading to code
> > repetition.
> > To make this scenario easier, here introduces usb_ep_type_string()
> > function, which returns a human-readable name of provided
> > endpoint type.
> > It also changes a few places switch was used to use this
> > new function.
> > 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> >  drivers/usb/common/common.c              | 16 ++++++++++++++++
> >  drivers/usb/core/endpoint.c              | 18 ++----------------
> >  drivers/usb/core/hcd.c                   | 17 ++---------------
> >  drivers/usb/dwc3/debugfs.c               | 23 ++++-------------------
> >  drivers/usb/gadget/udc/aspeed-vhub/epn.c |  6 +-----
> >  drivers/usb/gadget/udc/dummy_hcd.c       | 16 +---------------
> >  drivers/usb/host/xhci-trace.h            | 19 ++-----------------
> >  include/linux/usb/ch9.h                  |  8 ++++++++
> >  8 files changed, 36 insertions(+), 87 deletions(-)
> > 
> > diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
> > index 48277bbc15e4..2174dd9ec176 100644
> > --- a/drivers/usb/common/common.c
> > +++ b/drivers/usb/common/common.c
> > @@ -16,6 +16,22 @@
> >  #include <linux/usb/otg.h>
> >  #include <linux/of_platform.h>
> >  
> > +static const char *const ep_type_names[] = {
> > +	[USB_ENDPOINT_XFER_CONTROL] = "ctrl",
> > +	[USB_ENDPOINT_XFER_ISOC] = "isoc",
> > +	[USB_ENDPOINT_XFER_BULK] = "bulk",
> > +	[USB_ENDPOINT_XFER_INT] = "intr",
> > +};
> > +
> > +const char *usb_ep_type_string(int ep_type)
> > +{
> > +	if (ep_type < 0 || ep_type >= ARRAY_SIZE(ep_type_names))
> > +		return "unknown";
> > +
> > +	return ep_type_names[ep_type];
> > +}
> > +EXPORT_SYMBOL_GPL(usb_ep_type_string);
> > +
> >  const char *usb_otg_state_string(enum usb_otg_state state)
> >  {
> >  	static const char *const names[] = {
> > diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
> > index 1c2c04079676..afa43f9a47b2 100644
> > --- a/drivers/usb/core/endpoint.c
> > +++ b/drivers/usb/core/endpoint.c
> > @@ -60,23 +60,9 @@ static ssize_t type_show(struct device *dev, struct device_attribute *attr,
> >  			 char *buf)
> >  {
> >  	struct ep_device *ep = to_ep_device(dev);
> > -	char *type = "unknown";
> > +	int ep_type = usb_endpoint_type(ep->desc);
> >  
> > -	switch (usb_endpoint_type(ep->desc)) {
> > -	case USB_ENDPOINT_XFER_CONTROL:
> > -		type = "Control";
> > -		break;
> > -	case USB_ENDPOINT_XFER_ISOC:
> > -		type = "Isoc";
> > -		break;
> > -	case USB_ENDPOINT_XFER_BULK:
> > -		type = "Bulk";
> > -		break;
> > -	case USB_ENDPOINT_XFER_INT:
> > -		type = "Interrupt";
> > -		break;
> > -	}
> > -	return sprintf(buf, "%s\n", type);
> > +	return sprintf(buf, "%s\n", usb_ep_type_string(ep_type));
> 
> You just changed a user/kernel API here, the strings are now different
> from what they used to be :(
How about using these type string to keep them unchanged?

I need help from Felipe and Mathias to check whether the changes in dwc3
and xhci have side effect or not, and waiting for their comments

Thanks
> 
> That's not ok, odds are you will break tools if you do this.
> 
> >  }
> >  static DEVICE_ATTR_RO(type);
> >  
> > diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
> > index 015b126ce455..193ee92b2fdb 100644
> > --- a/drivers/usb/core/hcd.c
> > +++ b/drivers/usb/core/hcd.c
> > @@ -1875,23 +1875,10 @@ void usb_hcd_flush_endpoint(struct usb_device *udev,
> >  		/* kick hcd */
> >  		unlink1(hcd, urb, -ESHUTDOWN);
> >  		dev_dbg (hcd->self.controller,
> > -			"shutdown urb %pK ep%d%s%s\n",
> > +			"shutdown urb %pK ep%d%s-%s\n",
> >  			urb, usb_endpoint_num(&ep->desc),
> >  			is_in ? "in" : "out",
> > -			({	char *s;
> > -
> > -				 switch (usb_endpoint_type(&ep->desc)) {
> > -				 case USB_ENDPOINT_XFER_CONTROL:
> > -					s = ""; break;
> > -				 case USB_ENDPOINT_XFER_BULK:
> > -					s = "-bulk"; break;
> > -				 case USB_ENDPOINT_XFER_INT:
> > -					s = "-intr"; break;
> > -				 default:
> > -					s = "-iso"; break;
> > -				};
> > -				s;
> > -			}));
> > +			usb_ep_type_string(usb_endpoint_type(&ep->desc)));
> 
> You also changed the message here for control endpoints, but that's not
> a big deal, it's ok.
> 
> >  		usb_put_urb (urb);
> >  
> >  		/* list contents may have changed */
> > diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
> > index 1c792710348f..d9e2a63835fe 100644
> > --- a/drivers/usb/dwc3/debugfs.c
> > +++ b/drivers/usb/dwc3/debugfs.c
> > @@ -750,28 +750,13 @@ static int dwc3_transfer_type_show(struct seq_file *s, void *unused)
> >  	unsigned long		flags;
> >  
> >  	spin_lock_irqsave(&dwc->lock, flags);
> > -	if (!(dep->flags & DWC3_EP_ENABLED) ||
> > -			!dep->endpoint.desc) {
> > -		seq_printf(s, "--\n");
> > +	if (!(dep->flags & DWC3_EP_ENABLED) || !dep->endpoint.desc) {
> > +		seq_puts(s, "unknown\n");
> >  		goto out;
> >  	}
> >  
> > -	switch (usb_endpoint_type(dep->endpoint.desc)) {
> > -	case USB_ENDPOINT_XFER_CONTROL:
> > -		seq_printf(s, "control\n");
> > -		break;
> > -	case USB_ENDPOINT_XFER_ISOC:
> > -		seq_printf(s, "isochronous\n");
> > -		break;
> > -	case USB_ENDPOINT_XFER_BULK:
> > -		seq_printf(s, "bulk\n");
> > -		break;
> > -	case USB_ENDPOINT_XFER_INT:
> > -		seq_printf(s, "interrupt\n");
> > -		break;
> > -	default:
> > -		seq_printf(s, "--\n");
> > -	}
> > +	seq_printf(s, "%s\n",
> > +		   usb_ep_type_string(usb_endpoint_type(dep->endpoint.desc)));
> 
> It is debugfs, so no real API guarantees at all, but you did change the
> output format, and that's not always good.
got it
> 
> >  
> >  out:
> >  	spin_unlock_irqrestore(&dwc->lock, flags);
> > diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
> > index 4a28e3fbeb0b..165b0a43670e 100644
> > --- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c
> > +++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
> > @@ -593,10 +593,6 @@ static int ast_vhub_epn_disable(struct usb_ep* u_ep)
> >  static int ast_vhub_epn_enable(struct usb_ep* u_ep,
> >  			       const struct usb_endpoint_descriptor *desc)
> >  {
> > -	static const char *ep_type_string[] __maybe_unused = { "ctrl",
> > -							       "isoc",
> > -							       "bulk",
> > -							       "intr" };
> >  	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
> >  	struct ast_vhub_dev *dev;
> >  	struct ast_vhub *vhub;
> > @@ -646,7 +642,7 @@ static int ast_vhub_epn_enable(struct usb_ep* u_ep,
> >  	ep->epn.wedged = false;
> >  
> >  	EPDBG(ep, "Enabling [%s] %s num %d maxpacket=%d\n",
> > -	      ep->epn.is_in ? "in" : "out", ep_type_string[type],
> > +	      ep->epn.is_in ? "in" : "out", usb_ep_type_string(type),
> >  	      usb_endpoint_num(desc), maxpacket);
> >  
> >  	/* Can we use DMA descriptor mode ? */
> > diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
> > index baf72f95f0f1..40c6a484e232 100644
> > --- a/drivers/usb/gadget/udc/dummy_hcd.c
> > +++ b/drivers/usb/gadget/udc/dummy_hcd.c
> > @@ -617,21 +617,7 @@ static int dummy_enable(struct usb_ep *_ep,
> >  		_ep->name,
> >  		desc->bEndpointAddress & 0x0f,
> >  		(desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
> > -		({ char *val;
> > -		 switch (usb_endpoint_type(desc)) {
> > -		 case USB_ENDPOINT_XFER_BULK:
> > -			 val = "bulk";
> > -			 break;
> > -		 case USB_ENDPOINT_XFER_ISOC:
> > -			 val = "iso";
> > -			 break;
> > -		 case USB_ENDPOINT_XFER_INT:
> > -			 val = "intr";
> > -			 break;
> > -		 default:
> > -			 val = "ctrl";
> > -			 break;
> > -		 } val; }),
> > +		usb_ep_type_string(usb_endpoint_type(desc)),
> >  		max, ep->stream_en ? "enabled" : "disabled");
> >  
> >  	/* at this point real hardware should be NAKing transfers
> > diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h
> > index 88b427434bd8..bac73d688f11 100644
> > --- a/drivers/usb/host/xhci-trace.h
> > +++ b/drivers/usb/host/xhci-trace.h
> > @@ -289,23 +289,8 @@ DECLARE_EVENT_CLASS(xhci_log_urb,
> >  	),
> >  	TP_printk("ep%d%s-%s: urb %p pipe %u slot %d length %d/%d sgs %d/%d stream %d flags %08x",
> >  			__entry->epnum, __entry->dir_in ? "in" : "out",
> > -			({ char *s;
> > -			switch (__entry->type) {
> > -			case USB_ENDPOINT_XFER_INT:
> > -				s = "intr";
> > -				break;
> > -			case USB_ENDPOINT_XFER_CONTROL:
> > -				s = "control";
> > -				break;
> > -			case USB_ENDPOINT_XFER_BULK:
> > -				s = "bulk";
> > -				break;
> > -			case USB_ENDPOINT_XFER_ISOC:
> > -				s = "isoc";
> > -				break;
> > -			default:
> > -				s = "UNKNOWN";
> > -			} s; }), __entry->urb, __entry->pipe, __entry->slot_id,
> > +			usb_ep_type_string(__entry->type),
> > +			__entry->urb, __entry->pipe, __entry->slot_id,
> >  			__entry->actual, __entry->length, __entry->num_mapped_sgs,
> >  			__entry->num_sgs, __entry->stream, __entry->flags
> >  		)
> 
> Another api change with "control" :(
> 
> I like the idea, but you can not break user/kernel apis like this
> without knowing the affects that could happen.
> 
> thanks,
> 
> greg k-h
diff mbox series

Patch

diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
index 48277bbc15e4..2174dd9ec176 100644
--- a/drivers/usb/common/common.c
+++ b/drivers/usb/common/common.c
@@ -16,6 +16,22 @@ 
 #include <linux/usb/otg.h>
 #include <linux/of_platform.h>
 
+static const char *const ep_type_names[] = {
+	[USB_ENDPOINT_XFER_CONTROL] = "ctrl",
+	[USB_ENDPOINT_XFER_ISOC] = "isoc",
+	[USB_ENDPOINT_XFER_BULK] = "bulk",
+	[USB_ENDPOINT_XFER_INT] = "intr",
+};
+
+const char *usb_ep_type_string(int ep_type)
+{
+	if (ep_type < 0 || ep_type >= ARRAY_SIZE(ep_type_names))
+		return "unknown";
+
+	return ep_type_names[ep_type];
+}
+EXPORT_SYMBOL_GPL(usb_ep_type_string);
+
 const char *usb_otg_state_string(enum usb_otg_state state)
 {
 	static const char *const names[] = {
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index 1c2c04079676..afa43f9a47b2 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -60,23 +60,9 @@  static ssize_t type_show(struct device *dev, struct device_attribute *attr,
 			 char *buf)
 {
 	struct ep_device *ep = to_ep_device(dev);
-	char *type = "unknown";
+	int ep_type = usb_endpoint_type(ep->desc);
 
-	switch (usb_endpoint_type(ep->desc)) {
-	case USB_ENDPOINT_XFER_CONTROL:
-		type = "Control";
-		break;
-	case USB_ENDPOINT_XFER_ISOC:
-		type = "Isoc";
-		break;
-	case USB_ENDPOINT_XFER_BULK:
-		type = "Bulk";
-		break;
-	case USB_ENDPOINT_XFER_INT:
-		type = "Interrupt";
-		break;
-	}
-	return sprintf(buf, "%s\n", type);
+	return sprintf(buf, "%s\n", usb_ep_type_string(ep_type));
 }
 static DEVICE_ATTR_RO(type);
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 015b126ce455..193ee92b2fdb 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1875,23 +1875,10 @@  void usb_hcd_flush_endpoint(struct usb_device *udev,
 		/* kick hcd */
 		unlink1(hcd, urb, -ESHUTDOWN);
 		dev_dbg (hcd->self.controller,
-			"shutdown urb %pK ep%d%s%s\n",
+			"shutdown urb %pK ep%d%s-%s\n",
 			urb, usb_endpoint_num(&ep->desc),
 			is_in ? "in" : "out",
-			({	char *s;
-
-				 switch (usb_endpoint_type(&ep->desc)) {
-				 case USB_ENDPOINT_XFER_CONTROL:
-					s = ""; break;
-				 case USB_ENDPOINT_XFER_BULK:
-					s = "-bulk"; break;
-				 case USB_ENDPOINT_XFER_INT:
-					s = "-intr"; break;
-				 default:
-					s = "-iso"; break;
-				};
-				s;
-			}));
+			usb_ep_type_string(usb_endpoint_type(&ep->desc)));
 		usb_put_urb (urb);
 
 		/* list contents may have changed */
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index 1c792710348f..d9e2a63835fe 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -750,28 +750,13 @@  static int dwc3_transfer_type_show(struct seq_file *s, void *unused)
 	unsigned long		flags;
 
 	spin_lock_irqsave(&dwc->lock, flags);
-	if (!(dep->flags & DWC3_EP_ENABLED) ||
-			!dep->endpoint.desc) {
-		seq_printf(s, "--\n");
+	if (!(dep->flags & DWC3_EP_ENABLED) || !dep->endpoint.desc) {
+		seq_puts(s, "unknown\n");
 		goto out;
 	}
 
-	switch (usb_endpoint_type(dep->endpoint.desc)) {
-	case USB_ENDPOINT_XFER_CONTROL:
-		seq_printf(s, "control\n");
-		break;
-	case USB_ENDPOINT_XFER_ISOC:
-		seq_printf(s, "isochronous\n");
-		break;
-	case USB_ENDPOINT_XFER_BULK:
-		seq_printf(s, "bulk\n");
-		break;
-	case USB_ENDPOINT_XFER_INT:
-		seq_printf(s, "interrupt\n");
-		break;
-	default:
-		seq_printf(s, "--\n");
-	}
+	seq_printf(s, "%s\n",
+		   usb_ep_type_string(usb_endpoint_type(dep->endpoint.desc)));
 
 out:
 	spin_unlock_irqrestore(&dwc->lock, flags);
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
index 4a28e3fbeb0b..165b0a43670e 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
@@ -593,10 +593,6 @@  static int ast_vhub_epn_disable(struct usb_ep* u_ep)
 static int ast_vhub_epn_enable(struct usb_ep* u_ep,
 			       const struct usb_endpoint_descriptor *desc)
 {
-	static const char *ep_type_string[] __maybe_unused = { "ctrl",
-							       "isoc",
-							       "bulk",
-							       "intr" };
 	struct ast_vhub_ep *ep = to_ast_ep(u_ep);
 	struct ast_vhub_dev *dev;
 	struct ast_vhub *vhub;
@@ -646,7 +642,7 @@  static int ast_vhub_epn_enable(struct usb_ep* u_ep,
 	ep->epn.wedged = false;
 
 	EPDBG(ep, "Enabling [%s] %s num %d maxpacket=%d\n",
-	      ep->epn.is_in ? "in" : "out", ep_type_string[type],
+	      ep->epn.is_in ? "in" : "out", usb_ep_type_string(type),
 	      usb_endpoint_num(desc), maxpacket);
 
 	/* Can we use DMA descriptor mode ? */
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index baf72f95f0f1..40c6a484e232 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -617,21 +617,7 @@  static int dummy_enable(struct usb_ep *_ep,
 		_ep->name,
 		desc->bEndpointAddress & 0x0f,
 		(desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
-		({ char *val;
-		 switch (usb_endpoint_type(desc)) {
-		 case USB_ENDPOINT_XFER_BULK:
-			 val = "bulk";
-			 break;
-		 case USB_ENDPOINT_XFER_ISOC:
-			 val = "iso";
-			 break;
-		 case USB_ENDPOINT_XFER_INT:
-			 val = "intr";
-			 break;
-		 default:
-			 val = "ctrl";
-			 break;
-		 } val; }),
+		usb_ep_type_string(usb_endpoint_type(desc)),
 		max, ep->stream_en ? "enabled" : "disabled");
 
 	/* at this point real hardware should be NAKing transfers
diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h
index 88b427434bd8..bac73d688f11 100644
--- a/drivers/usb/host/xhci-trace.h
+++ b/drivers/usb/host/xhci-trace.h
@@ -289,23 +289,8 @@  DECLARE_EVENT_CLASS(xhci_log_urb,
 	),
 	TP_printk("ep%d%s-%s: urb %p pipe %u slot %d length %d/%d sgs %d/%d stream %d flags %08x",
 			__entry->epnum, __entry->dir_in ? "in" : "out",
-			({ char *s;
-			switch (__entry->type) {
-			case USB_ENDPOINT_XFER_INT:
-				s = "intr";
-				break;
-			case USB_ENDPOINT_XFER_CONTROL:
-				s = "control";
-				break;
-			case USB_ENDPOINT_XFER_BULK:
-				s = "bulk";
-				break;
-			case USB_ENDPOINT_XFER_ISOC:
-				s = "isoc";
-				break;
-			default:
-				s = "UNKNOWN";
-			} s; }), __entry->urb, __entry->pipe, __entry->slot_id,
+			usb_ep_type_string(__entry->type),
+			__entry->urb, __entry->pipe, __entry->slot_id,
 			__entry->actual, __entry->length, __entry->num_mapped_sgs,
 			__entry->num_sgs, __entry->stream, __entry->flags
 		)
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 523aa088f6ab..da82606be605 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -36,6 +36,14 @@ 
 #include <linux/device.h>
 #include <uapi/linux/usb/ch9.h>
 
+/**
+ * usb_ep_type_string() - Returns human readable-name of the endpoint type.
+ * @ep_type: The endpoint type to return human-readable name for.  If it's not
+ *   any of the types: USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT},
+ *   usually got by usb_endpoint_type(), the string 'unknown' will be returned.
+ */
+extern const char *usb_ep_type_string(int ep_type);
+
 /**
  * usb_speed_string() - Returns human readable-name of the speed.
  * @speed: The speed to return human-readable name for.  If it's not