| Message ID | 20190210121657.4200-1-masneyb@onstation.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: qcom_defconfig: add options for LG Nexus 5 phone | expand |
On Sun, Feb 10, 2019 at 1:17 PM Brian Masney <masneyb@onstation.org> wrote: > Add wcn36xx wireless, msm vibrator, pm8941 power key, bq24190 charger, > spmi-iadc, spmi-vadc, mpu6515 gyroscope / accelerometer, and tsl2772 > proximity / light drivers as modules to support the LG Nexus 5 > (hammerhead) phone. > > CFG80211 is changed to be a module to match MAC80211 since this isn't > required for initial bootup. > > Device manager support is also added as a module since this is needed by > postmarketOS. > > Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Brian if this doesn't get applied because of the occasional maintainer overload just send it directly to the ARM SoC maintainers arm@kernel.org that's what I do. Yours, Linus Walleij
On Sun, Feb 10, 2019 at 07:16:57AM -0500, Brian Masney wrote: > Add wcn36xx wireless, msm vibrator, pm8941 power key, bq24190 charger, > spmi-iadc, spmi-vadc, mpu6515 gyroscope / accelerometer, and tsl2772 > proximity / light drivers as modules to support the LG Nexus 5 > (hammerhead) phone. > > CFG80211 is changed to be a module to match MAC80211 since this isn't > required for initial bootup. > > Device manager support is also added as a module since this is needed by > postmarketOS. > > Signed-off-by: Brian Masney <masneyb@onstation.org> I'll queue this up for the next set of PRs. Thanks, Andy
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index bd6440f23493..7dc91e822537 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -50,7 +50,8 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_IPV6 is not set -CONFIG_CFG80211=y +CONFIG_CFG80211=m +CONFIG_MAC80211=m CONFIG_RFKILL=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -72,6 +73,8 @@ CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=m CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_ATL1C=y @@ -85,6 +88,7 @@ CONFIG_SLIP_MODE_SLIP6=y CONFIG_USB_USBNET=y # CONFIG_USB_NET_AX8817X is not set # CONFIG_USB_NET_ZAURUS is not set +CONFIG_WCN36XX=m CONFIG_BRCMFMAC=m CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -94,6 +98,8 @@ CONFIG_KEYBOARD_PMIC8XXX=y CONFIG_INPUT_JOYSTICK=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_MISC=y +CONFIG_INPUT_MSM_VIBRATOR=m +CONFIG_INPUT_PM8941_PWRKEY=m CONFIG_INPUT_PM8XXX_VIBRATOR=y CONFIG_INPUT_PMIC8XXX_PWRKEY=y CONFIG_INPUT_UINPUT=y @@ -127,6 +133,7 @@ CONFIG_GPIO_SYSFS=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_MSM=y CONFIG_CHARGER_QCOM_SMBB=y +CONFIG_CHARGER_BQ24190=m CONFIG_THERMAL=y CONFIG_QCOM_TSENS=y CONFIG_MFD_PM8XXX=y @@ -226,7 +233,11 @@ CONFIG_IIO=y CONFIG_IIO_BUFFER_CB=y CONFIG_IIO_SW_TRIGGER=y CONFIG_KXSD9=y +CONFIG_QCOM_SPMI_IADC=m +CONFIG_QCOM_SPMI_VADC=m CONFIG_MPU3050_I2C=y +CONFIG_INV_MPU6050_I2C=m +CONFIG_TSL2772=m CONFIG_AK8975=y CONFIG_IIO_HRTIMER_TRIGGER=y CONFIG_BMP280=y
Add wcn36xx wireless, msm vibrator, pm8941 power key, bq24190 charger, spmi-iadc, spmi-vadc, mpu6515 gyroscope / accelerometer, and tsl2772 proximity / light drivers as modules to support the LG Nexus 5 (hammerhead) phone. CFG80211 is changed to be a module to match MAC80211 since this isn't required for initial bootup. Device manager support is also added as a module since this is needed by postmarketOS. Signed-off-by: Brian Masney <masneyb@onstation.org> --- arch/arm/configs/qcom_defconfig | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)