diff mbox series

[1/2] arm64: dts: bitmain: Add GPIO support for BM1880 SoC

Message ID 20190226115022.19022-1-manivannan.sadhasivam@linaro.org (mailing list archive)
State Mainlined, archived
Commit 367e592788a2724f2558b8579ccf212cc9434158
Headers show
Series [1/2] arm64: dts: bitmain: Add GPIO support for BM1880 SoC | expand

Commit Message

Manivannan Sadhasivam Feb. 26, 2019, 11:50 a.m. UTC
Add GPIO support for Bitmain BM1880 SoC based on Designware APB GPIO
controller IP. IP exposes 3 GPIO controllers with a total of 72 pins.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/bitmain/bm1880.dtsi | 54 +++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

Comments

Linus Walleij March 5, 2019, 7:55 a.m. UTC | #1
On Tue, Feb 26, 2019 at 12:50 PM Manivannan Sadhasivam
<manivannan.sadhasivam@linaro.org> wrote:

> Add GPIO support for Bitmain BM1880 SoC based on Designware APB GPIO
> controller IP. IP exposes 3 GPIO controllers with a total of 72 pins.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
Manivannan Sadhasivam March 7, 2019, 5:24 p.m. UTC | #2
On Tue, Feb 26, 2019 at 05:20:21PM +0530, Manivannan Sadhasivam wrote:
> Add GPIO support for Bitmain BM1880 SoC based on Designware APB GPIO
> controller IP. IP exposes 3 GPIO controllers with a total of 72 pins.
> 

Applied for v5.2 with Linus's Reviewed-by tag.

Thanks,
Mani

> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  arch/arm64/boot/dts/bitmain/bm1880.dtsi | 54 +++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
> index 55a4769e0de2..e4da4ec6a5ee 100644
> --- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
> +++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
> @@ -80,6 +80,60 @@
>  			#interrupt-cells = <3>;
>  		};
>  
> +		gpio0: gpio@50027000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "snps,dw-apb-gpio";
> +			reg = <0x0 0x50027000 0x0 0x400>;
> +
> +			porta: gpio-controller@0 {
> +				compatible = "snps,dw-apb-gpio-port";
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				snps,nr-gpios = <32>;
> +				reg = <0>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +		};
> +
> +		gpio1: gpio@50027400 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "snps,dw-apb-gpio";
> +			reg = <0x0 0x50027400 0x0 0x400>;
> +
> +			portb: gpio-controller@0 {
> +				compatible = "snps,dw-apb-gpio-port";
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				snps,nr-gpios = <32>;
> +				reg = <0>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +		};
> +
> +		gpio2: gpio@50027800 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "snps,dw-apb-gpio";
> +			reg = <0x0 0x50027800 0x0 0x400>;
> +
> +			portc: gpio-controller@0 {
> +				compatible = "snps,dw-apb-gpio-port";
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				snps,nr-gpios = <8>;
> +				reg = <0>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +		};
> +
>  		uart0: serial@58018000 {
>  			compatible = "snps,dw-apb-uart";
>  			reg = <0x0 0x58018000 0x0 0x2000>;
> -- 
> 2.17.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index 55a4769e0de2..e4da4ec6a5ee 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -80,6 +80,60 @@ 
 			#interrupt-cells = <3>;
 		};
 
+		gpio0: gpio@50027000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x50027000 0x0 0x400>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@50027400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x50027400 0x0 0x400>;
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio2: gpio@50027800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x50027800 0x0 0x400>;
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <8>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		uart0: serial@58018000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x58018000 0x0 0x2000>;