mbox series

[V3,0/6] stmmac: add some fixes for stm32

Message ID 1551774568-11732-1-git-send-email-christophe.roullier@st.com (mailing list archive)
Headers show
Series stmmac: add some fixes for stm32 | expand

Message

Christophe Roullier March 5, 2019, 8:29 a.m. UTC
For common stmmac:
	- Add support to set CSR Clock range selection in DT
For stm32mpu:
	- Glue codes to support magic packet
	- Glue codes to support all PHY config :
		PHY_MODE (MII,GMII, RMII, RGMII) and in normal,
		PHY wo crystal (25Mhz),
		PHY wo crystal (50Mhz), No 125Mhz from PHY config
For stm32mcu:
	- Add Ethernet support for stm32h7

Changes in V3:
	- Reverse for syscfg management because it is manage by these patches
	  https://lkml.org/lkml/2018/12/12/133
	  https://lkml.org/lkml/2018/12/12/134
	  https://lkml.org/lkml/2018/12/12/131
	  https://lkml.org/lkml/2018/12/12/132


Christophe Roullier (6):
  net: ethernet: stmmac: manage Ethernet WoL for stm32mp157c.
  net: ethernet: stmmac: update to support all PHY config for
    stm32mp157c.
  dt-bindings: net: stmmac: add phys config properties
  net: ethernet: stmmac: add management of clk_csr property
  dt-bindings: net: stmmac: remove syscfg clock property
  ARM: dts: stm32: Add Ethernet support on stm32h7 SOC and activate it
    for eval and disco boards

 .../devicetree/bindings/net/stm32-dwmac.txt        |   9 +-
 arch/arm/boot/dts/stm32h743-pinctrl.dtsi           |  15 +++
 arch/arm/boot/dts/stm32h743.dtsi                   |  13 ++
 arch/arm/boot/dts/stm32h743i-disco.dts             |  17 +++
 arch/arm/boot/dts/stm32h743i-eval.dts              |  17 +++
 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c  | 135 +++++++++++++++++----
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |   3 +
 7 files changed, 183 insertions(+), 26 deletions(-)

Comments

David Miller March 8, 2019, 7:48 p.m. UTC | #1
From: Christophe Roullier <christophe.roullier@st.com>
Date: Tue, 5 Mar 2019 09:29:22 +0100

> For common stmmac:
> 	- Add support to set CSR Clock range selection in DT
> For stm32mpu:
> 	- Glue codes to support magic packet
> 	- Glue codes to support all PHY config :
> 		PHY_MODE (MII,GMII, RMII, RGMII) and in normal,
> 		PHY wo crystal (25Mhz),
> 		PHY wo crystal (50Mhz), No 125Mhz from PHY config
> For stm32mcu:
> 	- Add Ethernet support for stm32h7
> 
> Changes in V3:
> 	- Reverse for syscfg management because it is manage by these patches
> 	  https://lkml.org/lkml/2018/12/12/133
> 	  https://lkml.org/lkml/2018/12/12/134
> 	  https://lkml.org/lkml/2018/12/12/131
> 	  https://lkml.org/lkml/2018/12/12/132

Series applied, thanks.