Message ID | 20190302134735.4393-6-wsa+renesas@sang-engineering.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | i2c: core: introduce atomic transfers | expand |
On Sat, Mar 02, 2019 at 02:47:33PM +0100, Wolfram Sang wrote: > From: Tero Kristo <t-kristo@ti.com> > > Add the master_xfer_irqless hook to enable i2c transactions > in irq disabled contexts like the poweroff case. > > Signed-off-by: Tero Kristo <t-kristo@ti.com> > Signed-off-by: Keerthy <j-keerthy@ti.com> > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Minor nit below not withstanding Reviewed-by: Simon Horman <horms+renesas@verge.net.au> > --- > drivers/i2c/busses/i2c-omap.c | 79 ++++++++++++++++++++++++++++++++++++------- > 1 file changed, 66 insertions(+), 13 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c > index cd9c65f3d404..bf48126faf94 100644 > --- a/drivers/i2c/busses/i2c-omap.c > +++ b/drivers/i2c/busses/i2c-omap.c > @@ -269,6 +269,8 @@ static const u8 reg_map_ip_v2[] = { > [OMAP_I2C_IP_V2_IRQENABLE_CLR] = 0x30, > }; > > +static int omap_i2c_xfer_data(struct omap_i2c_dev *omap); > + > static inline void omap_i2c_write_reg(struct omap_i2c_dev *omap, > int reg, u16 val) > { > @@ -648,15 +650,28 @@ static void omap_i2c_resize_fifo(struct omap_i2c_dev *omap, u8 size, bool is_rx) > (1000 * omap->speed / 8); > } > > +static void omap_i2c_wait(struct omap_i2c_dev *omap) > +{ > + u16 stat; > + u16 mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG); > + int count = 0; > + > + do { > + stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG); > + count++; > + } while (!(stat & mask) && count < 5); > +} > + > /* > * Low level master read/write transaction. > */ > static int omap_i2c_xfer_msg(struct i2c_adapter *adap, > - struct i2c_msg *msg, int stop) > + struct i2c_msg *msg, int stop, bool polling) > { > struct omap_i2c_dev *omap = i2c_get_adapdata(adap); > unsigned long timeout; > u16 w; > + int ret; > > dev_dbg(omap->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n", > msg->addr, msg->len, msg->flags, stop); > @@ -680,7 +695,8 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, > w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR; > omap_i2c_write_reg(omap, OMAP_I2C_BUF_REG, w); > > - reinit_completion(&omap->cmd_complete); > + if (!polling) > + reinit_completion(&omap->cmd_complete); > omap->cmd_err = 0; > > w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT; > @@ -732,8 +748,21 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, > * REVISIT: We should abort the transfer on signals, but the bus goes > * into arbitration and we're currently unable to recover from it. > */ > - timeout = wait_for_completion_timeout(&omap->cmd_complete, > - OMAP_I2C_TIMEOUT); > + if (!polling) { > + timeout = wait_for_completion_timeout(&omap->cmd_complete, > + OMAP_I2C_TIMEOUT); > + } else { > + do { > + omap_i2c_wait(omap); > + ret = omap_i2c_xfer_data(omap); > + } while (ret == -EAGAIN); > + > + if (!ret) > + timeout = 1; > + else > + timeout = 0; nit: the following might be cleaner ret = !!timeout; > + } > + > if (timeout == 0) { > dev_err(omap->dev, "controller timed out\n"); > omap_i2c_reset(omap); > @@ -772,7 +801,8 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, > * to do the work during IRQ processing. > */ > static int > -omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) > +omap_i2c_xfer_common(struct i2c_adapter *adap, struct i2c_msg msgs[], int num, > + bool polling) > { > struct omap_i2c_dev *omap = i2c_get_adapdata(adap); > int i; > @@ -794,7 +824,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) > omap->set_mpu_wkup_lat(omap->dev, omap->latency); > > for (i = 0; i < num; i++) { > - r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1))); > + r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)), > + polling); > if (r != 0) > break; > } > @@ -813,6 +844,18 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) > return r; > } > > +static int > +omap_i2c_xfer_irq(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) > +{ > + return omap_i2c_xfer_common(adap, msgs, num, false); > +} > + > +static int > +omap_i2c_xfer_polling(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) > +{ > + return omap_i2c_xfer_common(adap, msgs, num, true); > +} > + > static u32 > omap_i2c_func(struct i2c_adapter *adap) > { > @@ -1035,10 +1078,8 @@ omap_i2c_isr(int irq, void *dev_id) > return ret; > } > > -static irqreturn_t > -omap_i2c_isr_thread(int this_irq, void *dev_id) > +static int omap_i2c_xfer_data(struct omap_i2c_dev *omap) > { > - struct omap_i2c_dev *omap = dev_id; > u16 bits; > u16 stat; > int err = 0, count = 0; > @@ -1056,7 +1097,8 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) > > if (!stat) { > /* my work here is done */ > - goto out; > + err = -EAGAIN; > + break; > } > > dev_dbg(omap->dev, "IRQ (ISR = 0x%04x)\n", stat); > @@ -1165,14 +1207,25 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) > } > } while (stat); > > - omap_i2c_complete_cmd(omap, err); > + return err; > +} > + > +static irqreturn_t > +omap_i2c_isr_thread(int this_irq, void *dev_id) > +{ > + int ret; > + struct omap_i2c_dev *omap = dev_id; > + > + ret = omap_i2c_xfer_data(omap); > + if (ret != -EAGAIN) > + omap_i2c_complete_cmd(omap, ret); > > -out: > return IRQ_HANDLED; > } > > static const struct i2c_algorithm omap_i2c_algo = { > - .master_xfer = omap_i2c_xfer, > + .master_xfer = omap_i2c_xfer_irq, > + .master_xfer_atomic = omap_i2c_xfer_polling, > .functionality = omap_i2c_func, > }; > > -- > 2.11.0 >
On Fri, Mar 15, 2019 at 01:47:18PM +0100, Simon Horman wrote: > On Sat, Mar 02, 2019 at 02:47:33PM +0100, Wolfram Sang wrote: > > + if (!polling) { > > + timeout = wait_for_completion_timeout(&omap->cmd_complete, > > + OMAP_I2C_TIMEOUT); > > + } else { > > + do { > > + omap_i2c_wait(omap); > > + ret = omap_i2c_xfer_data(omap); > > + } while (ret == -EAGAIN); > > + > > + if (!ret) > > + timeout = 1; > > + else > > + timeout = 0; > > > nit: the following might be cleaner > > ret = !!timeout; > Other way around, perhaps, timeout = !ret; > > + }
> > > + if (!ret) > > > + timeout = 1; > > > + else > > > + timeout = 0; > > > > > > nit: the following might be cleaner > > > > ret = !!timeout; > > > > Other way around, perhaps, > > timeout = !ret; I saw that but didn't want to modify this patch. But yes, this is easy enough and looks a lot better.
On Wed, Mar 27, 2019 at 02:50:45PM +0100, Wolfram Sang wrote: > > > > > + if (!ret) > > > > + timeout = 1; > > > > + else > > > > + timeout = 0; > > > > > > > > > nit: the following might be cleaner > > > > > > ret = !!timeout; > > > > > > > Other way around, perhaps, > > > > timeout = !ret; > > I saw that but didn't want to modify this patch. But yes, this is easy > enough and looks a lot better. Thanks, I don't think this needs to block progress.
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index cd9c65f3d404..bf48126faf94 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -269,6 +269,8 @@ static const u8 reg_map_ip_v2[] = { [OMAP_I2C_IP_V2_IRQENABLE_CLR] = 0x30, }; +static int omap_i2c_xfer_data(struct omap_i2c_dev *omap); + static inline void omap_i2c_write_reg(struct omap_i2c_dev *omap, int reg, u16 val) { @@ -648,15 +650,28 @@ static void omap_i2c_resize_fifo(struct omap_i2c_dev *omap, u8 size, bool is_rx) (1000 * omap->speed / 8); } +static void omap_i2c_wait(struct omap_i2c_dev *omap) +{ + u16 stat; + u16 mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG); + int count = 0; + + do { + stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG); + count++; + } while (!(stat & mask) && count < 5); +} + /* * Low level master read/write transaction. */ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, - struct i2c_msg *msg, int stop) + struct i2c_msg *msg, int stop, bool polling) { struct omap_i2c_dev *omap = i2c_get_adapdata(adap); unsigned long timeout; u16 w; + int ret; dev_dbg(omap->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n", msg->addr, msg->len, msg->flags, stop); @@ -680,7 +695,8 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR; omap_i2c_write_reg(omap, OMAP_I2C_BUF_REG, w); - reinit_completion(&omap->cmd_complete); + if (!polling) + reinit_completion(&omap->cmd_complete); omap->cmd_err = 0; w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT; @@ -732,8 +748,21 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, * REVISIT: We should abort the transfer on signals, but the bus goes * into arbitration and we're currently unable to recover from it. */ - timeout = wait_for_completion_timeout(&omap->cmd_complete, - OMAP_I2C_TIMEOUT); + if (!polling) { + timeout = wait_for_completion_timeout(&omap->cmd_complete, + OMAP_I2C_TIMEOUT); + } else { + do { + omap_i2c_wait(omap); + ret = omap_i2c_xfer_data(omap); + } while (ret == -EAGAIN); + + if (!ret) + timeout = 1; + else + timeout = 0; + } + if (timeout == 0) { dev_err(omap->dev, "controller timed out\n"); omap_i2c_reset(omap); @@ -772,7 +801,8 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, * to do the work during IRQ processing. */ static int -omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) +omap_i2c_xfer_common(struct i2c_adapter *adap, struct i2c_msg msgs[], int num, + bool polling) { struct omap_i2c_dev *omap = i2c_get_adapdata(adap); int i; @@ -794,7 +824,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) omap->set_mpu_wkup_lat(omap->dev, omap->latency); for (i = 0; i < num; i++) { - r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1))); + r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)), + polling); if (r != 0) break; } @@ -813,6 +844,18 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) return r; } +static int +omap_i2c_xfer_irq(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) +{ + return omap_i2c_xfer_common(adap, msgs, num, false); +} + +static int +omap_i2c_xfer_polling(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) +{ + return omap_i2c_xfer_common(adap, msgs, num, true); +} + static u32 omap_i2c_func(struct i2c_adapter *adap) { @@ -1035,10 +1078,8 @@ omap_i2c_isr(int irq, void *dev_id) return ret; } -static irqreturn_t -omap_i2c_isr_thread(int this_irq, void *dev_id) +static int omap_i2c_xfer_data(struct omap_i2c_dev *omap) { - struct omap_i2c_dev *omap = dev_id; u16 bits; u16 stat; int err = 0, count = 0; @@ -1056,7 +1097,8 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) if (!stat) { /* my work here is done */ - goto out; + err = -EAGAIN; + break; } dev_dbg(omap->dev, "IRQ (ISR = 0x%04x)\n", stat); @@ -1165,14 +1207,25 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) } } while (stat); - omap_i2c_complete_cmd(omap, err); + return err; +} + +static irqreturn_t +omap_i2c_isr_thread(int this_irq, void *dev_id) +{ + int ret; + struct omap_i2c_dev *omap = dev_id; + + ret = omap_i2c_xfer_data(omap); + if (ret != -EAGAIN) + omap_i2c_complete_cmd(omap, ret); -out: return IRQ_HANDLED; } static const struct i2c_algorithm omap_i2c_algo = { - .master_xfer = omap_i2c_xfer, + .master_xfer = omap_i2c_xfer_irq, + .master_xfer_atomic = omap_i2c_xfer_polling, .functionality = omap_i2c_func, };