mbox series

[v5,00/12] PCI: brcmstb: Add Broadcom Settopbox PCIe support (resend)

Message ID 1537367527-20773-1-git-send-email-jim2101024@gmail.com (mailing list archive)
Headers show
Series PCI: brcmstb: Add Broadcom Settopbox PCIe support (resend) | expand

Message

Jim Quinlan Sept. 19, 2018, 2:31 p.m. UTC
This patch series adds support for the Broadcom Settopbox PCIe host
controller.  It is targeted to Broadcom Settopbox chips running on
ARM, ARM64, and MIPS platforms.

V5 Changes:
  - V4 had its own DMA ops structure in the PCIe driver which would
    override/coexist with the default arch DMA ops.  This approach was
    scrapped, and this version instead essentially implements custom
    definitions of the __phys_to_dma and __dma_to_phys operations for the
    three target arches: MIPs, ARM64, ARM.  This was the course suggested
    by one of the V4 reviewers (ChristophH).

    For MIPs and ARM64, the DMA remapping is easily accomplished by having
    custom definitions of __phys_to_dma and __dma_to_phys.  For
    MIPs/BMIPs, ARCH_HAS_PHYS_TO_DMA is already selected and the two
    functions are just modified.  For ARM64, this driver selects
    ARCH_HAS_PHYS_TO_DMA and declares and defines __phys_to_dma() and
    __dma_to_phys().  For ARM, things were not so simple.  The default
    functions like __arch_pfn_to_dma() had to be overridden by custom ones
    defined in arch/arm/mach-bcm/include/mach/memory.h.  For these
    functions to be "seen", we had to declare our own brcmstb_defconfig
    and no longer use multi_v7_defconfig.  This is unfortunate.

  - Commits have been better organized to first implement the main driver,
    then add features (MSI, DMA remap infrastructure), and then add
    the DMA remapping modifications for MIPs, ARM64, and ARM.

V4 Changes:
  - Merged all BrcmSTB PCIe controller files into a single file.
  - All new files now have the SPDX identifier.
  - Removed the list of PCIe controllers.
  - Removed "link-up" race.
  - Removed probe of msi psuedo-device.
  - Multiple comment text changes, as requested.
  - "SSC" => "Spread Spectrum Clocking".
  - Set 'memc' variable.
  - Unnecessary variable initializations removed (eg rc_bar2_size).
  - Added comment on "L23" link state.
  - Removed use of "__refdata".
  - Formatting of structure elements.

V3 Changes:
  - Fold pcie-brcmstb-msi.c into pcie-brcmstb.c
  - Use PCI_XXX constants for PCIe capability registers
  - Removal of any unused constants
  - Change s/pci/pcie/ for filenames, comment text
  - Config space access now uses 8/16/32 read/writes
  - Use proper multi-line comment style
  - Use function names, structure that are common in other host drivers
  - DT binding 'brcm,ssc' is now 'brcm,enable-ssc'
  - Dropped DT binding 'xyz-supply'
  - Not setting CRS support as Linux does it if it is advertised.
  - Removed code that was considered "debug code".
  - Use of_get_pcie_domain_nr()
  - Variable 'bridge_setup_done' removed.

V2 Changes:
* Patch brcmstb-add-memory-API:
  - fix DT_PROP_DATA_TO_U32 macro.
  - dropped one EXPORT_SYMBOL, changed the other to GPL.
* Patch DT-docs-for-Brcmstb-PCIe:
  - change 'brcm,gen' prop to standard 'max-link-speed'.
  - rewrite bindings commit to omit standard prop defs.
  - change props "supplies", "supply-names" to "xyz-supply"
* Patch removed: export-symbol-arch_setup_dma_ops [4/9]
* Patch brcmstb-add-dma-ranges:
  - use get_dma_ops(); also use a const dma_map_ops structure.
  - rewrite map_sg(), unmap_sg(), other calls like syng_sg_*()
  - omit brcm_mapping_error(), but added code in brcm_dma_supported()
  - put all of the notifier code in one compilation unit.



Florian Fainelli (1):
  soc: bcm: brcmstb: add memory API

Jim Quinlan (11):
  dt-bindings: pci: add DT docs for Brcmstb PCIe device
  PCI: brcmstb: add Broadcom STB PCIe host controller driver
  PCI: brcmstb: add dma-range mapping for inbound traffic
  PCI: brcmstb: add MSI capability
  MIPS: BMIPS: add dma remap for BrcmSTB PCIe
  PCI/MSI: enable PCI_MSI_IRQ_DOMAIN support for MIPS
  MIPS: BMIPS: add PCI bindings for 7425, 7435
  MIPS: BMIPS: enable PCI
  ARM64: declare __phys_to_dma on ARCH_HAS_PHYS_TO_DMA
  ARM64: add dma remap for BrcmSTB PCIe
  ARM: add dma remap for BrcmSTB PCIe

 .../devicetree/bindings/pci/brcmstb-pcie.txt       |   59 +
 arch/arm/Kconfig                                   |   33 +
 arch/arm/configs/brcmstb_defconfig                 |  204 +++
 arch/arm/configs/multi_v7_defconfig                |    3 -
 arch/arm/mach-bcm/Kconfig                          |   21 +-
 arch/arm/mach-bcm/Makefile.boot                    |    0
 arch/arm/mach-bcm/include/mach/irqs.h              |    3 +
 arch/arm/mach-bcm/include/mach/memory.h            |   47 +
 arch/arm/mach-bcm/include/mach/uncompress.h        |    8 +
 arch/arm64/include/asm/dma-direct.h                |   16 +
 arch/mips/Kconfig                                  |    3 +
 arch/mips/bmips/dma.c                              |    9 +
 arch/mips/boot/dts/brcm/bcm7425.dtsi               |   28 +
 arch/mips/boot/dts/brcm/bcm7435.dtsi               |   28 +
 arch/mips/boot/dts/brcm/bcm97425svmb.dts           |    4 +
 arch/mips/boot/dts/brcm/bcm97435svmb.dts           |    4 +
 drivers/pci/Kconfig                                |    2 +-
 drivers/pci/controller/Kconfig                     |   13 +
 drivers/pci/controller/Makefile                    |    1 +
 drivers/pci/controller/pcie-brcmstb.c              | 1554 ++++++++++++++++++++
 drivers/soc/bcm/brcmstb/Makefile                   |    2 +-
 drivers/soc/bcm/brcmstb/memory.c                   |  158 ++
 include/soc/brcmstb/common.h                       |   16 +
 include/soc/brcmstb/memory_api.h                   |   26 +
 24 files changed, 2217 insertions(+), 25 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/brcmstb-pcie.txt
 create mode 100644 arch/arm/configs/brcmstb_defconfig
 create mode 100644 arch/arm/mach-bcm/Makefile.boot
 create mode 100644 arch/arm/mach-bcm/include/mach/irqs.h
 create mode 100644 arch/arm/mach-bcm/include/mach/memory.h
 create mode 100644 arch/arm/mach-bcm/include/mach/uncompress.h
 create mode 100644 arch/arm64/include/asm/dma-direct.h
 create mode 100644 drivers/pci/controller/pcie-brcmstb.c
 create mode 100644 drivers/soc/bcm/brcmstb/memory.c
 create mode 100644 include/soc/brcmstb/memory_api.h

Comments

Bjorn Helgaas March 20, 2019, 11:15 p.m. UTC | #1
On Wed, Sep 19, 2018 at 10:31:55AM -0400, Jim Quinlan wrote:
> This patch series adds support for the Broadcom Settopbox PCIe host
> controller.  It is targeted to Broadcom Settopbox chips running on
> ARM, ARM64, and MIPS platforms.

Whatever happened with this series?  I saw some discussion that suggests
it's not quite ready to be merged, but there's a lot of good work here,
so I hope it can get finished up.

Bjorn
Florian Fainelli March 20, 2019, 11:22 p.m. UTC | #2
On 3/20/19 4:15 PM, Bjorn Helgaas wrote:
> On Wed, Sep 19, 2018 at 10:31:55AM -0400, Jim Quinlan wrote:
>> This patch series adds support for the Broadcom Settopbox PCIe host
>> controller.  It is targeted to Broadcom Settopbox chips running on
>> ARM, ARM64, and MIPS platforms.
> 
> Whatever happened with this series?  I saw some discussion that suggests
> it's not quite ready to be merged, but there's a lot of good work here,
> so I hope it can get finished up.

Thanks, these are encouraging words! We've been side tracked with a
number of things but it is still planned to get this included upstream
sooner rather than later. I am not sure how we will approach the
mangling of DMA addresses to fit the PCIe's quirky address map, but
hopefully with Christoph's latest chunk of work, there is even less to
be done by drivers.