| Message ID | 20190318172216.20098-1-bfoster@redhat.com (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Headers | show |
| Series | generic: test stale data exposure after writeback crash | expand |
On Mon, Mar 18, 2019 at 01:22:16PM -0400, Brian Foster wrote: > XFS has historically had a stale data exposure window if a crash > occurs after a delalloc->physical extent conversion but before > writeback completes to the associated extent. While this should be a > rare occurrence in production environments due to typical writeback > ordering and such, it is not guaranteed in all cases until data > extents are initialized as unwritten (or otherwise zeroed) before > they are written. > > Add a test that performs selective writeback ordering to reproduce > stale data exposure after a crash. Note that this test currently > fails on XFS. > > Signed-off-by: Brian Foster <bfoster@redhat.com> > --- > > As noted in the commit log, this test currently fails on XFS. I think > it's worth considering regardless because we're pretty close to fixing > this problem in the kernel. Darrick has posted a patch[1] that while > apparently still needs a bit of work to accommodate performance > concerns, does allow XFS to pass this test. > > Thoughts, reviews, flames appreciated. > > Brian > > [1] https://marc.info/?l=linux-xfs&m=155259894926863&w=2 > > tests/generic/999 | 70 +++++++++++++++++++++++++++++++++++++++++++ > tests/generic/999.out | 13 ++++++++ > tests/generic/group | 1 + > 3 files changed, 84 insertions(+) > create mode 100755 tests/generic/999 > create mode 100644 tests/generic/999.out > > diff --git a/tests/generic/999 b/tests/generic/999 > new file mode 100755 > index 00000000..46c85d07 > --- /dev/null > +++ b/tests/generic/999 > @@ -0,0 +1,70 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. > +# > +# FS QA Test 999 > +# > +# Test a some write patterns for stale data exposure after a crash. XFS is > +# historically susceptible to this problem in the window between delalloc to > +# physical extent conversion and writeback completion. > +# > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + rm -f $tmp.* > +} > + > +# get standard environment, filters and checks > +. ./common/rc > + > +# remove previous $seqres.full before test > +rm -f $seqres.full > + > +# real QA test starts here > + > +# Modify as appropriate. > +_supported_fs generic > +_supported_os Linux > +_require_scratch > +_require_scratch_shutdown > + > +# create a small fs and initialize free blocks with a unique pattern > +_scratch_mkfs_sized $((1024 * 1024 * 100)) >> $seqres.full 2>&1 > +_scratch_mount > +$XFS_IO_PROG -f -c "pwrite -S 0xab 0 100m" -c fsync $SCRATCH_MNT/spc \ > + >> $seqres.full 2>&1 > +rm -f $SCRATCH_MNT/spc > +$XFS_IO_PROG -c fsync $SCRATCH_MNT > + > +# Write a couple files with particular writeback sequences. The first writes a > +# delalloc extent and triggers writeback on the last page. The second triggers > +# post-eof preallocation (on XFS), write extends into the preallocation and > +# triggers writeback of the last written page. > +$XFS_IO_PROG -fc "pwrite 0 64k" -c "sync_range -w 60k 4k" \ > + -c "sync_range -a 60k 4k" $SCRATCH_MNT/file.1 >> $seqres.full 2>&1 I suspect that on hosts with 64k pagesize, the sync_range call will write the whole page back and we see no zero after shutdown, but I don't have the hardware to test.. Also, 0-60k being zero only happens if delalloc is enabled, so testing on ext4 with "nodelalloc" mount option fails the test. Perhaps we could skip the test on ext4 if "nodelalloc" is given in mount option. > +$XFS_IO_PROG -fc "pwrite 0 68k" -c fsync -c "pwrite 96k 4k" \ > + -c "sync_range -w 96k 4k" -c "sync_range -a 96k 4k" \ > + $SCRATCH_MNT/file.2 >> $seqres.full 2>&1 > + > +# Shut down before any other writeback completes. Flush the log to persist inode > +# size updates. > +_scratch_shutdown -f > + > +# Now dump both files. The region prior to the last page in the first file > +# should be zero filled. The region between the two writes to the second file > +# should also be zero filled. > +_scratch_cycle_mount > +hexdump $SCRATCH_MNT/file.1 > +hexdump $SCRATCH_MNT/file.2 > + > +status=0 > +exit > diff --git a/tests/generic/999.out b/tests/generic/999.out > new file mode 100644 > index 00000000..db3c5b7e > --- /dev/null > +++ b/tests/generic/999.out > @@ -0,0 +1,13 @@ > +QA output created by 999 > +0000000 0000 0000 0000 0000 0000 0000 0000 0000 > +* > +000f000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd > +* > +0010000 > +0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd > +* > +0011000 0000 0000 0000 0000 0000 0000 0000 0000 > +* > +0018000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd > +* > +0019000 > diff --git a/tests/generic/group b/tests/generic/group > index 78b9b45d..aa4734af 100644 > --- a/tests/generic/group > +++ b/tests/generic/group > @@ -538,3 +538,4 @@ > 533 auto quick attr > 534 auto quick log > 535 auto quick log > +999 auto quick rw Also in 'shutdown' group. Thanks, Eryu > -- > 2.17.2 >
On Sat, Mar 23, 2019 at 04:23:39PM +0800, Eryu Guan wrote: > On Mon, Mar 18, 2019 at 01:22:16PM -0400, Brian Foster wrote: > > XFS has historically had a stale data exposure window if a crash > > occurs after a delalloc->physical extent conversion but before > > writeback completes to the associated extent. While this should be a > > rare occurrence in production environments due to typical writeback > > ordering and such, it is not guaranteed in all cases until data > > extents are initialized as unwritten (or otherwise zeroed) before > > they are written. > > > > Add a test that performs selective writeback ordering to reproduce > > stale data exposure after a crash. Note that this test currently > > fails on XFS. > > > > Signed-off-by: Brian Foster <bfoster@redhat.com> > > --- > > > > As noted in the commit log, this test currently fails on XFS. I think > > it's worth considering regardless because we're pretty close to fixing > > this problem in the kernel. Darrick has posted a patch[1] that while > > apparently still needs a bit of work to accommodate performance > > concerns, does allow XFS to pass this test. > > > > Thoughts, reviews, flames appreciated. > > > > Brian > > > > [1] https://marc.info/?l=linux-xfs&m=155259894926863&w=2 > > > > tests/generic/999 | 70 +++++++++++++++++++++++++++++++++++++++++++ > > tests/generic/999.out | 13 ++++++++ > > tests/generic/group | 1 + > > 3 files changed, 84 insertions(+) > > create mode 100755 tests/generic/999 > > create mode 100644 tests/generic/999.out > > > > diff --git a/tests/generic/999 b/tests/generic/999 > > new file mode 100755 > > index 00000000..46c85d07 > > --- /dev/null > > +++ b/tests/generic/999 > > @@ -0,0 +1,70 @@ > > +#! /bin/bash > > +# SPDX-License-Identifier: GPL-2.0 > > +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. > > +# > > +# FS QA Test 999 > > +# > > +# Test a some write patterns for stale data exposure after a crash. XFS is > > +# historically susceptible to this problem in the window between delalloc to > > +# physical extent conversion and writeback completion. > > +# > > +seq=`basename $0` > > +seqres=$RESULT_DIR/$seq > > +echo "QA output created by $seq" > > + > > +here=`pwd` > > +tmp=/tmp/$$ > > +status=1 # failure is the default! > > +trap "_cleanup; exit \$status" 0 1 2 3 15 > > + > > +_cleanup() > > +{ > > + cd / > > + rm -f $tmp.* > > +} > > + > > +# get standard environment, filters and checks > > +. ./common/rc > > + > > +# remove previous $seqres.full before test > > +rm -f $seqres.full > > + > > +# real QA test starts here > > + > > +# Modify as appropriate. > > +_supported_fs generic > > +_supported_os Linux > > +_require_scratch > > +_require_scratch_shutdown > > + > > +# create a small fs and initialize free blocks with a unique pattern > > +_scratch_mkfs_sized $((1024 * 1024 * 100)) >> $seqres.full 2>&1 > > +_scratch_mount > > +$XFS_IO_PROG -f -c "pwrite -S 0xab 0 100m" -c fsync $SCRATCH_MNT/spc \ > > + >> $seqres.full 2>&1 > > +rm -f $SCRATCH_MNT/spc > > +$XFS_IO_PROG -c fsync $SCRATCH_MNT > > + > > +# Write a couple files with particular writeback sequences. The first writes a > > +# delalloc extent and triggers writeback on the last page. The second triggers > > +# post-eof preallocation (on XFS), write extends into the preallocation and > > +# triggers writeback of the last written page. > > +$XFS_IO_PROG -fc "pwrite 0 64k" -c "sync_range -w 60k 4k" \ > > + -c "sync_range -a 60k 4k" $SCRATCH_MNT/file.1 >> $seqres.full 2>&1 > > I suspect that on hosts with 64k pagesize, the sync_range call will > write the whole page back and we see no zero after shutdown, but I don't > have the hardware to test.. > Good point. I'll give that a whirl on a 64k page box and see if I can get away with just adjusting the offsets to reproduce this more generically. > Also, 0-60k being zero only happens if delalloc is enabled, so testing > on ext4 with "nodelalloc" mount option fails the test. Perhaps we could > skip the test on ext4 if "nodelalloc" is given in mount option. > Hmm, so I'm assuming that these blocks not being zero means they expose stale data. Is stale data exposure expected behavior in this ext4 mode? ISTM that this test should be expected to fail in that case. That said, I'll defer to ext4 devs on how to handle this scenario; perhaps this is something that there is no intention to fix and so the failure is ultimately noise. I would prefer not to unilaterally decide on that, however, so I'll probably leave this as is unless an ext4 person chimes in before I get to v2. Somebody can always patch it later if it turns out to be a problem. > > +$XFS_IO_PROG -fc "pwrite 0 68k" -c fsync -c "pwrite 96k 4k" \ > > + -c "sync_range -w 96k 4k" -c "sync_range -a 96k 4k" \ > > + $SCRATCH_MNT/file.2 >> $seqres.full 2>&1 > > + > > +# Shut down before any other writeback completes. Flush the log to persist inode > > +# size updates. > > +_scratch_shutdown -f > > + > > +# Now dump both files. The region prior to the last page in the first file > > +# should be zero filled. The region between the two writes to the second file > > +# should also be zero filled. > > +_scratch_cycle_mount > > +hexdump $SCRATCH_MNT/file.1 > > +hexdump $SCRATCH_MNT/file.2 > > + > > +status=0 > > +exit > > diff --git a/tests/generic/999.out b/tests/generic/999.out > > new file mode 100644 > > index 00000000..db3c5b7e > > --- /dev/null > > +++ b/tests/generic/999.out > > @@ -0,0 +1,13 @@ > > +QA output created by 999 > > +0000000 0000 0000 0000 0000 0000 0000 0000 0000 > > +* > > +000f000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd > > +* > > +0010000 > > +0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd > > +* > > +0011000 0000 0000 0000 0000 0000 0000 0000 0000 > > +* > > +0018000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd > > +* > > +0019000 > > diff --git a/tests/generic/group b/tests/generic/group > > index 78b9b45d..aa4734af 100644 > > --- a/tests/generic/group > > +++ b/tests/generic/group > > @@ -538,3 +538,4 @@ > > 533 auto quick attr > > 534 auto quick log > > 535 auto quick log > > +999 auto quick rw > > Also in 'shutdown' group. > Ack, thanks. Brian > Thanks, > Eryu > > -- > > 2.17.2 > >
On Mon, Mar 25, 2019 at 08:56:15AM -0400, Brian Foster wrote: > On Sat, Mar 23, 2019 at 04:23:39PM +0800, Eryu Guan wrote: > > On Mon, Mar 18, 2019 at 01:22:16PM -0400, Brian Foster wrote: > > > XFS has historically had a stale data exposure window if a crash > > > occurs after a delalloc->physical extent conversion but before > > > writeback completes to the associated extent. While this should be a > > > rare occurrence in production environments due to typical writeback > > > ordering and such, it is not guaranteed in all cases until data > > > extents are initialized as unwritten (or otherwise zeroed) before > > > they are written. > > > > > > Add a test that performs selective writeback ordering to reproduce > > > stale data exposure after a crash. Note that this test currently > > > fails on XFS. > > > > > > Signed-off-by: Brian Foster <bfoster@redhat.com> > > > --- > > > > > > As noted in the commit log, this test currently fails on XFS. I think > > > it's worth considering regardless because we're pretty close to fixing > > > this problem in the kernel. Darrick has posted a patch[1] that while > > > apparently still needs a bit of work to accommodate performance > > > concerns, does allow XFS to pass this test. > > > > > > Thoughts, reviews, flames appreciated. > > > > > > Brian > > > > > > [1] https://marc.info/?l=linux-xfs&m=155259894926863&w=2 > > > > > > tests/generic/999 | 70 +++++++++++++++++++++++++++++++++++++++++++ > > > tests/generic/999.out | 13 ++++++++ > > > tests/generic/group | 1 + > > > 3 files changed, 84 insertions(+) > > > create mode 100755 tests/generic/999 > > > create mode 100644 tests/generic/999.out > > > > > > diff --git a/tests/generic/999 b/tests/generic/999 > > > new file mode 100755 > > > index 00000000..46c85d07 > > > --- /dev/null > > > +++ b/tests/generic/999 > > > @@ -0,0 +1,70 @@ > > > +#! /bin/bash > > > +# SPDX-License-Identifier: GPL-2.0 > > > +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. > > > +# > > > +# FS QA Test 999 > > > +# > > > +# Test a some write patterns for stale data exposure after a crash. XFS is > > > +# historically susceptible to this problem in the window between delalloc to > > > +# physical extent conversion and writeback completion. > > > +# > > > +seq=`basename $0` > > > +seqres=$RESULT_DIR/$seq > > > +echo "QA output created by $seq" > > > + > > > +here=`pwd` > > > +tmp=/tmp/$$ > > > +status=1 # failure is the default! > > > +trap "_cleanup; exit \$status" 0 1 2 3 15 > > > + > > > +_cleanup() > > > +{ > > > + cd / > > > + rm -f $tmp.* > > > +} > > > + > > > +# get standard environment, filters and checks > > > +. ./common/rc > > > + > > > +# remove previous $seqres.full before test > > > +rm -f $seqres.full > > > + > > > +# real QA test starts here > > > + > > > +# Modify as appropriate. > > > +_supported_fs generic > > > +_supported_os Linux > > > +_require_scratch > > > +_require_scratch_shutdown > > > + > > > +# create a small fs and initialize free blocks with a unique pattern > > > +_scratch_mkfs_sized $((1024 * 1024 * 100)) >> $seqres.full 2>&1 > > > +_scratch_mount > > > +$XFS_IO_PROG -f -c "pwrite -S 0xab 0 100m" -c fsync $SCRATCH_MNT/spc \ > > > + >> $seqres.full 2>&1 > > > +rm -f $SCRATCH_MNT/spc > > > +$XFS_IO_PROG -c fsync $SCRATCH_MNT > > > + > > > +# Write a couple files with particular writeback sequences. The first writes a > > > +# delalloc extent and triggers writeback on the last page. The second triggers > > > +# post-eof preallocation (on XFS), write extends into the preallocation and > > > +# triggers writeback of the last written page. > > > +$XFS_IO_PROG -fc "pwrite 0 64k" -c "sync_range -w 60k 4k" \ > > > + -c "sync_range -a 60k 4k" $SCRATCH_MNT/file.1 >> $seqres.full 2>&1 > > > > I suspect that on hosts with 64k pagesize, the sync_range call will > > write the whole page back and we see no zero after shutdown, but I don't > > have the hardware to test.. > > > > Good point. I'll give that a whirl on a 64k page box and see if I can > get away with just adjusting the offsets to reproduce this more > generically. > > > Also, 0-60k being zero only happens if delalloc is enabled, so testing > > on ext4 with "nodelalloc" mount option fails the test. Perhaps we could > > skip the test on ext4 if "nodelalloc" is given in mount option. > > > > Hmm, so I'm assuming that these blocks not being zero means they expose > stale data. Is stale data exposure expected behavior in this ext4 mode? > ISTM that this test should be expected to fail in that case. That said, > I'll defer to ext4 devs on how to handle this scenario; perhaps this is > something that there is no intention to fix and so the failure is > ultimately noise. I would prefer not to unilaterally decide on that, > however, so I'll probably leave this as is unless an ext4 person chimes > in before I get to v2. Somebody can always patch it later if it turns > out to be a problem. > A couple quick followups.. Changing the offsets around has the potential to trigger different written back ranges of the file (unless we do something like always sync 64k chunks) which causes the test to fail, as currently written. Rather than enforce a particular writeback pattern, I'll update the offsets appropriately and verify the result by checking for stale bytes in the file rather than dumping the raw file as part of the magic output. Also, I tried out the nodelalloc ext4 mount option and see that this doesn't expose stale data, it just shows the file written to disk in full. The change above also allows this configuration to pass because we accommodate any behavior that doesn't expose stale data. Brian > > > +$XFS_IO_PROG -fc "pwrite 0 68k" -c fsync -c "pwrite 96k 4k" \ > > > + -c "sync_range -w 96k 4k" -c "sync_range -a 96k 4k" \ > > > + $SCRATCH_MNT/file.2 >> $seqres.full 2>&1 > > > + > > > +# Shut down before any other writeback completes. Flush the log to persist inode > > > +# size updates. > > > +_scratch_shutdown -f > > > + > > > +# Now dump both files. The region prior to the last page in the first file > > > +# should be zero filled. The region between the two writes to the second file > > > +# should also be zero filled. > > > +_scratch_cycle_mount > > > +hexdump $SCRATCH_MNT/file.1 > > > +hexdump $SCRATCH_MNT/file.2 > > > + > > > +status=0 > > > +exit > > > diff --git a/tests/generic/999.out b/tests/generic/999.out > > > new file mode 100644 > > > index 00000000..db3c5b7e > > > --- /dev/null > > > +++ b/tests/generic/999.out > > > @@ -0,0 +1,13 @@ > > > +QA output created by 999 > > > +0000000 0000 0000 0000 0000 0000 0000 0000 0000 > > > +* > > > +000f000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd > > > +* > > > +0010000 > > > +0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd > > > +* > > > +0011000 0000 0000 0000 0000 0000 0000 0000 0000 > > > +* > > > +0018000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd > > > +* > > > +0019000 > > > diff --git a/tests/generic/group b/tests/generic/group > > > index 78b9b45d..aa4734af 100644 > > > --- a/tests/generic/group > > > +++ b/tests/generic/group > > > @@ -538,3 +538,4 @@ > > > 533 auto quick attr > > > 534 auto quick log > > > 535 auto quick log > > > +999 auto quick rw > > > > Also in 'shutdown' group. > > > > Ack, thanks. > > Brian > > > Thanks, > > Eryu > > > -- > > > 2.17.2 > > >
diff --git a/tests/generic/999 b/tests/generic/999 new file mode 100755 index 00000000..46c85d07 --- /dev/null +++ b/tests/generic/999 @@ -0,0 +1,70 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test 999 +# +# Test a some write patterns for stale data exposure after a crash. XFS is +# historically susceptible to this problem in the window between delalloc to +# physical extent conversion and writeback completion. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +# Modify as appropriate. +_supported_fs generic +_supported_os Linux +_require_scratch +_require_scratch_shutdown + +# create a small fs and initialize free blocks with a unique pattern +_scratch_mkfs_sized $((1024 * 1024 * 100)) >> $seqres.full 2>&1 +_scratch_mount +$XFS_IO_PROG -f -c "pwrite -S 0xab 0 100m" -c fsync $SCRATCH_MNT/spc \ + >> $seqres.full 2>&1 +rm -f $SCRATCH_MNT/spc +$XFS_IO_PROG -c fsync $SCRATCH_MNT + +# Write a couple files with particular writeback sequences. The first writes a +# delalloc extent and triggers writeback on the last page. The second triggers +# post-eof preallocation (on XFS), write extends into the preallocation and +# triggers writeback of the last written page. +$XFS_IO_PROG -fc "pwrite 0 64k" -c "sync_range -w 60k 4k" \ + -c "sync_range -a 60k 4k" $SCRATCH_MNT/file.1 >> $seqres.full 2>&1 +$XFS_IO_PROG -fc "pwrite 0 68k" -c fsync -c "pwrite 96k 4k" \ + -c "sync_range -w 96k 4k" -c "sync_range -a 96k 4k" \ + $SCRATCH_MNT/file.2 >> $seqres.full 2>&1 + +# Shut down before any other writeback completes. Flush the log to persist inode +# size updates. +_scratch_shutdown -f + +# Now dump both files. The region prior to the last page in the first file +# should be zero filled. The region between the two writes to the second file +# should also be zero filled. +_scratch_cycle_mount +hexdump $SCRATCH_MNT/file.1 +hexdump $SCRATCH_MNT/file.2 + +status=0 +exit diff --git a/tests/generic/999.out b/tests/generic/999.out new file mode 100644 index 00000000..db3c5b7e --- /dev/null +++ b/tests/generic/999.out @@ -0,0 +1,13 @@ +QA output created by 999 +0000000 0000 0000 0000 0000 0000 0000 0000 0000 +* +000f000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd +* +0010000 +0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd +* +0011000 0000 0000 0000 0000 0000 0000 0000 0000 +* +0018000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd +* +0019000 diff --git a/tests/generic/group b/tests/generic/group index 78b9b45d..aa4734af 100644 --- a/tests/generic/group +++ b/tests/generic/group @@ -538,3 +538,4 @@ 533 auto quick attr 534 auto quick log 535 auto quick log +999 auto quick rw
XFS has historically had a stale data exposure window if a crash occurs after a delalloc->physical extent conversion but before writeback completes to the associated extent. While this should be a rare occurrence in production environments due to typical writeback ordering and such, it is not guaranteed in all cases until data extents are initialized as unwritten (or otherwise zeroed) before they are written. Add a test that performs selective writeback ordering to reproduce stale data exposure after a crash. Note that this test currently fails on XFS. Signed-off-by: Brian Foster <bfoster@redhat.com> --- As noted in the commit log, this test currently fails on XFS. I think it's worth considering regardless because we're pretty close to fixing this problem in the kernel. Darrick has posted a patch[1] that while apparently still needs a bit of work to accommodate performance concerns, does allow XFS to pass this test. Thoughts, reviews, flames appreciated. Brian [1] https://marc.info/?l=linux-xfs&m=155259894926863&w=2 tests/generic/999 | 70 +++++++++++++++++++++++++++++++++++++++++++ tests/generic/999.out | 13 ++++++++ tests/generic/group | 1 + 3 files changed, 84 insertions(+) create mode 100755 tests/generic/999 create mode 100644 tests/generic/999.out