Message ID | 20190325173501.22863-2-narmstrong@baylibre.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | media: platform: Add support for the Amlogic Meson G12A AO CEC Controller | expand |
On 3/25/19 6:34 PM, Neil Armstrong wrote: > The Amlogic G12A embeds a second CEC controller named AO-CEC-B, and > the other one is AO-CEC-A described by the current bindings. > > The registers interface is very close but the internal architecture registers -> register > is totally different. > > The other difference is the closk source, the AO-CEC-B takes the closk -> clock > "oscin", the Always-On Oscillator clock, as input and embeds a > dual-divider clock divider to provide the precise 32768Hz base > clock for CEC communication. > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > --- > .../devicetree/bindings/media/meson-ao-cec.txt | 15 +++++++++++---- > 1 file changed, 11 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/meson-ao-cec.txt b/Documentation/devicetree/bindings/media/meson-ao-cec.txt > index 8671bdb08080..d6e2f9cf0aaf 100644 > --- a/Documentation/devicetree/bindings/media/meson-ao-cec.txt > +++ b/Documentation/devicetree/bindings/media/meson-ao-cec.txt > @@ -4,16 +4,23 @@ The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is > to handle communication between HDMI connected devices over the CEC bus. > > Required properties: > - - compatible : value should be following > - "amlogic,meson-gx-ao-cec" > + - compatible : value should be following depending on the SoC : > + For GXBB, GXL, GXM and G12A (AO_CEC_A module) : > + "amlogic,meson-gx-ao-cec" > + For G12A (AO_CEC_B module) : > + "amlogic,meson-g12a-ao-cec" The driver uses "amlogic,meson-g12a-ao-cec-b", so there is a mismatch between the bindings and the driver. Please repost since it is important that the two correspond. Thanks! Hans > > - reg : Physical base address of the IP registers and length of memory > mapped region. > > - interrupts : AO-CEC interrupt number to the CPU. > - clocks : from common clock binding: handle to AO-CEC clock. > - - clock-names : from common clock binding: must contain "core", > - corresponding to entry in the clocks property. > + - clock-names : from common clock binding, must contain : > + For GXBB, GXL, GXM and G12A (AO_CEC_A module) : > + - "core" > + For G12A (AO_CEC_B module) : > + - "oscin" > + corresponding to entry in the clocks property. > - hdmi-phandle: phandle to the HDMI controller > > Example: >
On 27/03/2019 13:39, Hans Verkuil wrote: > On 3/25/19 6:34 PM, Neil Armstrong wrote: >> The Amlogic G12A embeds a second CEC controller named AO-CEC-B, and >> the other one is AO-CEC-A described by the current bindings. >> >> The registers interface is very close but the internal architecture > > registers -> register > >> is totally different. >> >> The other difference is the closk source, the AO-CEC-B takes the > > closk -> clock > >> "oscin", the Always-On Oscillator clock, as input and embeds a >> dual-divider clock divider to provide the precise 32768Hz base >> clock for CEC communication. >> >> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> >> --- >> .../devicetree/bindings/media/meson-ao-cec.txt | 15 +++++++++++---- >> 1 file changed, 11 insertions(+), 4 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/media/meson-ao-cec.txt b/Documentation/devicetree/bindings/media/meson-ao-cec.txt >> index 8671bdb08080..d6e2f9cf0aaf 100644 >> --- a/Documentation/devicetree/bindings/media/meson-ao-cec.txt >> +++ b/Documentation/devicetree/bindings/media/meson-ao-cec.txt >> @@ -4,16 +4,23 @@ The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is >> to handle communication between HDMI connected devices over the CEC bus. >> >> Required properties: >> - - compatible : value should be following >> - "amlogic,meson-gx-ao-cec" >> + - compatible : value should be following depending on the SoC : >> + For GXBB, GXL, GXM and G12A (AO_CEC_A module) : >> + "amlogic,meson-gx-ao-cec" >> + For G12A (AO_CEC_B module) : >> + "amlogic,meson-g12a-ao-cec" > > The driver uses "amlogic,meson-g12a-ao-cec-b", so there is a mismatch between > the bindings and the driver. > > Please repost since it is important that the two correspond. Indeed, thanks for spotting this, I'll fix the typos and the compatible in v2 Neil > > Thanks! > > Hans > >> >> - reg : Physical base address of the IP registers and length of memory >> mapped region. >> >> - interrupts : AO-CEC interrupt number to the CPU. >> - clocks : from common clock binding: handle to AO-CEC clock. >> - - clock-names : from common clock binding: must contain "core", >> - corresponding to entry in the clocks property. >> + - clock-names : from common clock binding, must contain : >> + For GXBB, GXL, GXM and G12A (AO_CEC_A module) : >> + - "core" >> + For G12A (AO_CEC_B module) : >> + - "oscin" >> + corresponding to entry in the clocks property. >> - hdmi-phandle: phandle to the HDMI controller >> >> Example: >> >
diff --git a/Documentation/devicetree/bindings/media/meson-ao-cec.txt b/Documentation/devicetree/bindings/media/meson-ao-cec.txt index 8671bdb08080..d6e2f9cf0aaf 100644 --- a/Documentation/devicetree/bindings/media/meson-ao-cec.txt +++ b/Documentation/devicetree/bindings/media/meson-ao-cec.txt @@ -4,16 +4,23 @@ The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is to handle communication between HDMI connected devices over the CEC bus. Required properties: - - compatible : value should be following - "amlogic,meson-gx-ao-cec" + - compatible : value should be following depending on the SoC : + For GXBB, GXL, GXM and G12A (AO_CEC_A module) : + "amlogic,meson-gx-ao-cec" + For G12A (AO_CEC_B module) : + "amlogic,meson-g12a-ao-cec" - reg : Physical base address of the IP registers and length of memory mapped region. - interrupts : AO-CEC interrupt number to the CPU. - clocks : from common clock binding: handle to AO-CEC clock. - - clock-names : from common clock binding: must contain "core", - corresponding to entry in the clocks property. + - clock-names : from common clock binding, must contain : + For GXBB, GXL, GXM and G12A (AO_CEC_A module) : + - "core" + For G12A (AO_CEC_B module) : + - "oscin" + corresponding to entry in the clocks property. - hdmi-phandle: phandle to the HDMI controller Example:
The Amlogic G12A embeds a second CEC controller named AO-CEC-B, and the other one is AO-CEC-A described by the current bindings. The registers interface is very close but the internal architecture is totally different. The other difference is the closk source, the AO-CEC-B takes the "oscin", the Always-On Oscillator clock, as input and embeds a dual-divider clock divider to provide the precise 32768Hz base clock for CEC communication. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- .../devicetree/bindings/media/meson-ao-cec.txt | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)