| Message ID | 20190327115722.7693-1-clingutla@codeaurora.org (mailing list archive) |
|---|---|
| State | Mainlined, archived |
| Commit | 5d777b185f6db92d8e201a7402f7b242958aafad |
| Headers | show |
| Series | [v2] arch_topology: Make cpu_capacity sysfs node as ready-only | expand |
On 3/27/2019 5:27 PM, Lingutla Chandrasekhar wrote: > If user updates any cpu's cpu_capacity, then the new value is going to > be applied to all its online sibling cpus. But this need not to be correct > always, as sibling cpus (in ARM, same micro architecture cpus) would have > different cpu_capacity with different performance characteristics. > So updating the user supplied cpu_capacity to all cpu siblings s/So/So, > is not correct. > > And another problem is, current code assumes that 'all cpus in a cluster > or with same package_id (core_siblings), would have same cpu_capacity'. > But with commit '5bdd2b3f0f8 ("arm64: topology: add support to remove > cpu topology sibling masks")', when a cpu hotplugged out, the cpu > information gets cleared in its sibling cpus. So user supplied -- > cpu_capacity would be applied to only online sibling cpus at the time. > After that, if any cpu hot plugged in, it would have different cpu_capacity s/hot plugged/hotplugged > than its siblings, which breaks the above assumption. > > So instead of mucking around the core sibling mask for user supplied -- > value, use device-tree to set cpu capacity. And make the cpu_capacity > node as read-only to know the assymetry between cpus in the system. s/assymetry/asymmetry > While at it, remove cpu_scale_mutex usage, which used for sysfs write > protection. > > Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> > Tested-by: Quentin Perret <quentin.perret@arm.com> > Acked-by: Sudeep Holla <sudeep.holla@arm.com> > Reviewed-by: Quentin Perret <quentin.perret@arm.com> > Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org> Please fix the commit text minor comments. otherwise , looks good. Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> -Mukesh > > diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c > index edfcf8d982e4..1739d7e1952a 100644 > --- a/drivers/base/arch_topology.c > +++ b/drivers/base/arch_topology.c > @@ -7,7 +7,6 @@ > */ > > #include <linux/acpi.h> > -#include <linux/arch_topology.h> > #include <linux/cpu.h> > #include <linux/cpufreq.h> > #include <linux/device.h> > @@ -31,7 +30,6 @@ void arch_set_freq_scale(struct cpumask *cpus, unsigned long cur_freq, > per_cpu(freq_scale, i) = scale; > } > > -static DEFINE_MUTEX(cpu_scale_mutex); > DEFINE_PER_CPU(unsigned long, cpu_scale) = SCHED_CAPACITY_SCALE; > > void topology_set_cpu_scale(unsigned int cpu, unsigned long capacity) > @@ -51,37 +49,7 @@ static ssize_t cpu_capacity_show(struct device *dev, > static void update_topology_flags_workfn(struct work_struct *work); > static DECLARE_WORK(update_topology_flags_work, update_topology_flags_workfn); > > -static ssize_t cpu_capacity_store(struct device *dev, > - struct device_attribute *attr, > - const char *buf, > - size_t count) > -{ > - struct cpu *cpu = container_of(dev, struct cpu, dev); > - int this_cpu = cpu->dev.id; > - int i; > - unsigned long new_capacity; > - ssize_t ret; > - > - if (!count) > - return 0; > - > - ret = kstrtoul(buf, 0, &new_capacity); > - if (ret) > - return ret; > - if (new_capacity > SCHED_CAPACITY_SCALE) > - return -EINVAL; > - > - mutex_lock(&cpu_scale_mutex); > - for_each_cpu(i, &cpu_topology[this_cpu].core_sibling) > - topology_set_cpu_scale(i, new_capacity); > - mutex_unlock(&cpu_scale_mutex); > - > - schedule_work(&update_topology_flags_work); > - > - return count; > -} > - > -static DEVICE_ATTR_RW(cpu_capacity); > +static DEVICE_ATTR_RO(cpu_capacity); > > static int register_cpu_capacity_sysctl(void) > { > @@ -141,7 +109,6 @@ void topology_normalize_cpu_scale(void) > return; > > pr_debug("cpu_capacity: capacity_scale=%u\n", capacity_scale); > - mutex_lock(&cpu_scale_mutex); > for_each_possible_cpu(cpu) { > pr_debug("cpu_capacity: cpu=%d raw_capacity=%u\n", > cpu, raw_capacity[cpu]); > @@ -151,7 +118,6 @@ void topology_normalize_cpu_scale(void) > pr_debug("cpu_capacity: CPU%d cpu_capacity=%lu\n", > cpu, topology_get_cpu_scale(NULL, cpu)); > } > - mutex_unlock(&cpu_scale_mutex); > } > > bool __init topology_parse_cpu_capacity(struct device_node *cpu_node, int cpu)
diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c index edfcf8d982e4..1739d7e1952a 100644 --- a/drivers/base/arch_topology.c +++ b/drivers/base/arch_topology.c @@ -7,7 +7,6 @@ */ #include <linux/acpi.h> -#include <linux/arch_topology.h> #include <linux/cpu.h> #include <linux/cpufreq.h> #include <linux/device.h> @@ -31,7 +30,6 @@ void arch_set_freq_scale(struct cpumask *cpus, unsigned long cur_freq, per_cpu(freq_scale, i) = scale; } -static DEFINE_MUTEX(cpu_scale_mutex); DEFINE_PER_CPU(unsigned long, cpu_scale) = SCHED_CAPACITY_SCALE; void topology_set_cpu_scale(unsigned int cpu, unsigned long capacity) @@ -51,37 +49,7 @@ static ssize_t cpu_capacity_show(struct device *dev, static void update_topology_flags_workfn(struct work_struct *work); static DECLARE_WORK(update_topology_flags_work, update_topology_flags_workfn); -static ssize_t cpu_capacity_store(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t count) -{ - struct cpu *cpu = container_of(dev, struct cpu, dev); - int this_cpu = cpu->dev.id; - int i; - unsigned long new_capacity; - ssize_t ret; - - if (!count) - return 0; - - ret = kstrtoul(buf, 0, &new_capacity); - if (ret) - return ret; - if (new_capacity > SCHED_CAPACITY_SCALE) - return -EINVAL; - - mutex_lock(&cpu_scale_mutex); - for_each_cpu(i, &cpu_topology[this_cpu].core_sibling) - topology_set_cpu_scale(i, new_capacity); - mutex_unlock(&cpu_scale_mutex); - - schedule_work(&update_topology_flags_work); - - return count; -} - -static DEVICE_ATTR_RW(cpu_capacity); +static DEVICE_ATTR_RO(cpu_capacity); static int register_cpu_capacity_sysctl(void) { @@ -141,7 +109,6 @@ void topology_normalize_cpu_scale(void) return; pr_debug("cpu_capacity: capacity_scale=%u\n", capacity_scale); - mutex_lock(&cpu_scale_mutex); for_each_possible_cpu(cpu) { pr_debug("cpu_capacity: cpu=%d raw_capacity=%u\n", cpu, raw_capacity[cpu]); @@ -151,7 +118,6 @@ void topology_normalize_cpu_scale(void) pr_debug("cpu_capacity: CPU%d cpu_capacity=%lu\n", cpu, topology_get_cpu_scale(NULL, cpu)); } - mutex_unlock(&cpu_scale_mutex); } bool __init topology_parse_cpu_capacity(struct device_node *cpu_node, int cpu)
If user updates any cpu's cpu_capacity, then the new value is going to be applied to all its online sibling cpus. But this need not to be correct always, as sibling cpus (in ARM, same micro architecture cpus) would have different cpu_capacity with different performance characteristics. So updating the user supplied cpu_capacity to all cpu siblings is not correct. And another problem is, current code assumes that 'all cpus in a cluster or with same package_id (core_siblings), would have same cpu_capacity'. But with commit '5bdd2b3f0f8 ("arm64: topology: add support to remove cpu topology sibling masks")', when a cpu hotplugged out, the cpu information gets cleared in its sibling cpus. So user supplied cpu_capacity would be applied to only online sibling cpus at the time. After that, if any cpu hot plugged in, it would have different cpu_capacity than its siblings, which breaks the above assumption. So instead of mucking around the core sibling mask for user supplied value, use device-tree to set cpu capacity. And make the cpu_capacity node as read-only to know the assymetry between cpus in the system. While at it, remove cpu_scale_mutex usage, which used for sysfs write protection. Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Quentin Perret <quentin.perret@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Quentin Perret <quentin.perret@arm.com> Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>