| Message ID | 20190402124016.20558-1-alexandre.belloni@bootlin.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | [v2,01/10] clk: at91: sckc: add support to specify registers bit offsets | expand |
Please disregard that series as this doesn't include the proper patches. On 02/04/2019 14:40:06+0200, Alexandre Belloni wrote: > This series add support for the sam9x60 clocks handled by the PMC. > > The first four patches are preparatory patches to handle register layout > and offset differences. Then, a driver for the new interface for PLLs is > added and the final patch is the driver for the sam9x60 PMC. > > changes in v2: > - rebased on v5.1-rc1 > - changed the PLL_ACR handling to conform to the datasheet errata > > Alexandre Belloni (7): > clk: at91: allow configuring peripheral PCR layout > clk: at91: allow configuring generated PCR layout > clk: at91: usb: Add sam9x60 support > clk: at91: master: Add sam9x60 support > clk: at91: add sam9x60 PLL driver > dt-bindings: clk: at91: add bindings for SAM9X60 pmc > clk: at91: add sam9x60 pmc driver > > Claudiu Beznea (3): > clk: at91: sckc: add support to specify registers bit offsets > clk: at91: sckc: add support for SAM9X60 > dt-bindings: clk: at91: add bindings for SAM9X60's slow clock > controller > > .../devicetree/bindings/clock/at91-clock.txt | 6 +- > drivers/clk/at91/Makefile | 2 + > drivers/clk/at91/at91sam9x5.c | 9 + > drivers/clk/at91/clk-generated.c | 48 +-- > drivers/clk/at91/clk-master.c | 8 +- > drivers/clk/at91/clk-peripheral.c | 46 +-- > drivers/clk/at91/clk-sam9x60-pll.c | 330 ++++++++++++++++++ > drivers/clk/at91/clk-usb.c | 33 +- > drivers/clk/at91/dt-compat.c | 12 +- > drivers/clk/at91/pmc.h | 23 ++ > drivers/clk/at91/sam9x60.c | 307 ++++++++++++++++ > drivers/clk/at91/sama5d2.c | 10 + > drivers/clk/at91/sama5d4.c | 8 + > drivers/clk/at91/sckc.c | 142 ++++++-- > include/linux/clk/at91_pmc.h | 12 +- > 15 files changed, 895 insertions(+), 101 deletions(-) > create mode 100644 drivers/clk/at91/clk-sam9x60-pll.c > create mode 100644 drivers/clk/at91/sam9x60.c > > -- > 2.20.1 >
This series add support for the sam9x60 clocks handled by the PMC. The first four patches are preparatory patches to handle register layout and offset differences. Then, a driver for the new interface for PLLs is added and the final patch is the driver for the sam9x60 PMC. changes in v2: - rebased on v5.1-rc1 - changed the PLL_ACR handling to conform to the datasheet errata Alexandre Belloni (7): clk: at91: allow configuring peripheral PCR layout clk: at91: allow configuring generated PCR layout clk: at91: usb: Add sam9x60 support clk: at91: master: Add sam9x60 support clk: at91: add sam9x60 PLL driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 pmc driver Claudiu Beznea (3): clk: at91: sckc: add support to specify registers bit offsets clk: at91: sckc: add support for SAM9X60 dt-bindings: clk: at91: add bindings for SAM9X60's slow clock controller .../devicetree/bindings/clock/at91-clock.txt | 6 +- drivers/clk/at91/Makefile | 2 + drivers/clk/at91/at91sam9x5.c | 9 + drivers/clk/at91/clk-generated.c | 48 +-- drivers/clk/at91/clk-master.c | 8 +- drivers/clk/at91/clk-peripheral.c | 46 +-- drivers/clk/at91/clk-sam9x60-pll.c | 330 ++++++++++++++++++ drivers/clk/at91/clk-usb.c | 33 +- drivers/clk/at91/dt-compat.c | 12 +- drivers/clk/at91/pmc.h | 23 ++ drivers/clk/at91/sam9x60.c | 307 ++++++++++++++++ drivers/clk/at91/sama5d2.c | 10 + drivers/clk/at91/sama5d4.c | 8 + drivers/clk/at91/sckc.c | 142 ++++++-- include/linux/clk/at91_pmc.h | 12 +- 15 files changed, 895 insertions(+), 101 deletions(-) create mode 100644 drivers/clk/at91/clk-sam9x60-pll.c create mode 100644 drivers/clk/at91/sam9x60.c