mbox series

[v3,0/2] Fix thunderx MTU with XDP

Message ID 20190411102633.3685-1-mcroce@redhat.com (mailing list archive)
Headers show
Series Fix thunderx MTU with XDP | expand

Message

Matteo Croce April 11, 2019, 10:26 a.m. UTC
The thunderx driver can't use XDP with all MTU values.
This patches sets the right MTU values, and add a check to avoid setting
a wrong value which will not function.

v3: Fix a copy-paste from two functions, tested on proper hardware:

# ip link show dev enP2p1s0v0
2: enP2p1s0v0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
    link/ether 1c:1b:0d:0d:52:a4 brd ff:ff:ff:ff:ff:ff
# ip link set enP2p1s0v0 mtu 1800
# ip link set dev enP2p1s0v0 xdpdrv object mtu.o
[  787.019730] nicvf 0002:01:00.1 enP2p1s0v0: Jumbo frames not yet supported with XDP, current MTU 1800.
RTNETLINK answers: Operation not supported
# ip link set enP2p1s0v0 mtu 1500
# ip link set dev enP2p1s0v0 xdpdrv object mtu.o
[  800.574568] nicvf 0002:01:00.1 enP2p1s0v0: Link is Up 10000 Mbps Full duplex
# ip link set enP2p1s0v0 mtu 1600
[  807.248321] nicvf 0002:01:00.1 enP2p1s0v0: Jumbo frames not yet supported with XDP, current MTU 1500.
RTNETLINK answers: Invalid argument

Matteo Croce (2):
  net: thunderx: raise XDP MTU to 1508
  net: thunderx: don't allow jumbo frames with XDP

 .../net/ethernet/cavium/thunder/nicvf_main.c  | 22 +++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

Comments

David Miller April 11, 2019, 6:11 p.m. UTC | #1
From: Matteo Croce <mcroce@redhat.com>
Date: Thu, 11 Apr 2019 12:26:31 +0200

> The thunderx driver can't use XDP with all MTU values.
> This patches sets the right MTU values, and add a check to avoid setting
> a wrong value which will not function.
> 
> v3: Fix a copy-paste from two functions, tested on proper hardware:
 ...

Series applied and queued up for -stable, thanks.