| Message ID | 1554818803-4070-3-git-send-email-alan.maguire@oracle.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 58dfc900faff6db7eb9bf01555622e0b6c74c262 |
| Headers | show |
| Series | L2 encap support for bpf_skb_adjust_room | expand |
On 04/09/2019 04:06 PM, Alan Maguire wrote: > commit 868d523535c2 ("bpf: add bpf_skb_adjust_room encap flags") > introduced support to bpf_skb_adjust_room for GSO-friendly GRE > and UDP encapsulation. > > For GSO to work for skbs, the inner headers (mac and network) need to > be marked. For L3 encapsulation using bpf_skb_adjust_room, the mac > and network headers are identical. Here we provide a way of specifying > the inner mac header length for cases where L2 encap is desired. Such > an approach can support encapsulated ethernet headers, MPLS headers etc. > For example to convert from a packet of form [eth][ip][tcp] to > [eth][ip][udp][inner mac][ip][tcp], something like the following could > be done: > > headroom = sizeof(iph) + sizeof(struct udphdr) + inner_maclen; > > ret = bpf_skb_adjust_room(skb, headroom, BPF_ADJ_ROOM_MAC, > BPF_F_ADJ_ROOM_ENCAP_L4_UDP | > BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 | > BPF_F_ADJ_ROOM_ENCAP_L2(inner_maclen)); > > Signed-off-by: Alan Maguire <alan.maguire@oracle.com> > --- > include/uapi/linux/bpf.h | 10 ++++++++++ > net/core/filter.c | 12 ++++++++---- > 2 files changed, 18 insertions(+), 4 deletions(-) > > diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h > index 8370245..912391c 100644 > --- a/include/uapi/linux/bpf.h > +++ b/include/uapi/linux/bpf.h > @@ -1500,6 +1500,10 @@ struct bpf_stack_build_id { > * * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP **: > * Use with ENCAP_L3 flags to further specify the tunnel type. > * > + * * **BPF_F_ADJ_ROOM_ENCAP_L2(len) **: > + * Use with ENCAP_L3/L4 flags to further specify the tunnel > + * type; **len** is the length of the inner MAC header. > + * > * A call to this helper is susceptible to change the underlaying > * packet buffer. Therefore, at load time, all checks on pointers > * previously done by the verifier are invalidated and must be > @@ -2641,10 +2645,16 @@ enum bpf_func_id { > /* BPF_FUNC_skb_adjust_room flags. */ > #define BPF_F_ADJ_ROOM_FIXED_GSO (1ULL << 0) > > +#define BPF_ADJ_ROOM_ENCAP_L2_MASK 0xff > +#define BPF_ADJ_ROOM_ENCAP_L2_SHIFT 56 Would appreciate a small whitespace cleanup in that tab after the define is replaced with a normal space like in the rest of the file. > #define BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 (1ULL << 1) > #define BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 (1ULL << 2) > #define BPF_F_ADJ_ROOM_ENCAP_L4_GRE (1ULL << 3) > #define BPF_F_ADJ_ROOM_ENCAP_L4_UDP (1ULL << 4) > +#define BPF_F_ADJ_ROOM_ENCAP_L2(len) (((__u64)len & \ > + BPF_ADJ_ROOM_ENCAP_L2_MASK) \ > + << BPF_ADJ_ROOM_ENCAP_L2_SHIFT) Ditto here. > /* Mode for BPF_FUNC_skb_adjust_room helper. */ > enum bpf_adj_room_mode { > diff --git a/net/core/filter.c b/net/core/filter.c > index 22eb2ed..a1654ef62 100644 > --- a/net/core/filter.c > +++ b/net/core/filter.c > @@ -2969,11 +2969,14 @@ static u32 bpf_skb_net_base_len(const struct sk_buff *skb) > #define BPF_F_ADJ_ROOM_MASK (BPF_F_ADJ_ROOM_FIXED_GSO | \ > BPF_F_ADJ_ROOM_ENCAP_L3_MASK | \ > BPF_F_ADJ_ROOM_ENCAP_L4_GRE | \ > - BPF_F_ADJ_ROOM_ENCAP_L4_UDP) > + BPF_F_ADJ_ROOM_ENCAP_L4_UDP | \ > + BPF_F_ADJ_ROOM_ENCAP_L2( \ > + BPF_ADJ_ROOM_ENCAP_L2_MASK)) > > static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff, > u64 flags) > { One thing that it seems missing in this but also in Willem's earlier set is that we reject these flags in bpf_skb_net_shrink(). Both are called from bpf_skb_adjust_room(), so if we don't support decap yet we should reject such flags so we can extend in future. Could you or Willem send a follow-up? Thanks! > + u8 inner_mac_len = flags >> BPF_ADJ_ROOM_ENCAP_L2_SHIFT; > bool encap = flags & BPF_F_ADJ_ROOM_ENCAP_L3_MASK; > u16 mac_len = 0, inner_net = 0, inner_trans = 0; > unsigned int gso_type = SKB_GSO_DODGY; > @@ -3008,6 +3011,8 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff, > > mac_len = skb->network_header - skb->mac_header; > inner_net = skb->network_header; > + if (inner_mac_len > len_diff) > + return -EINVAL; > inner_trans = skb->transport_header; > } > > @@ -3016,8 +3021,7 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff, > return ret; > > if (encap) { > - /* inner mac == inner_net on l3 encap */ > - skb->inner_mac_header = inner_net; > + skb->inner_mac_header = inner_net - inner_mac_len; > skb->inner_network_header = inner_net; > skb->inner_transport_header = inner_trans; > skb_set_inner_protocol(skb, skb->protocol); > @@ -3031,7 +3035,7 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff, > gso_type |= SKB_GSO_GRE; > else if (flags & BPF_F_ADJ_ROOM_ENCAP_L3_IPV6) > gso_type |= SKB_GSO_IPXIP6; > - else > + else if (flags & BPF_F_ADJ_ROOM_ENCAP_L3_IPV4) > gso_type |= SKB_GSO_IPXIP4; > > if (flags & BPF_F_ADJ_ROOM_ENCAP_L4_GRE || >
On Thu, Apr 11, 2019 at 5:09 PM Daniel Borkmann <daniel@iogearbox.net> wrote: > > On 04/09/2019 04:06 PM, Alan Maguire wrote: > > commit 868d523535c2 ("bpf: add bpf_skb_adjust_room encap flags") > > introduced support to bpf_skb_adjust_room for GSO-friendly GRE > > and UDP encapsulation. > > > > For GSO to work for skbs, the inner headers (mac and network) need to > > be marked. For L3 encapsulation using bpf_skb_adjust_room, the mac > > and network headers are identical. Here we provide a way of specifying > > the inner mac header length for cases where L2 encap is desired. Such > > an approach can support encapsulated ethernet headers, MPLS headers etc. > > For example to convert from a packet of form [eth][ip][tcp] to > > [eth][ip][udp][inner mac][ip][tcp], something like the following could > > be done: > > > > headroom = sizeof(iph) + sizeof(struct udphdr) + inner_maclen; > > > > ret = bpf_skb_adjust_room(skb, headroom, BPF_ADJ_ROOM_MAC, > > BPF_F_ADJ_ROOM_ENCAP_L4_UDP | > > BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 | > > BPF_F_ADJ_ROOM_ENCAP_L2(inner_maclen)); > > > > Signed-off-by: Alan Maguire <alan.maguire@oracle.com> > > --- > > include/uapi/linux/bpf.h | 10 ++++++++++ > > net/core/filter.c | 12 ++++++++---- > > 2 files changed, 18 insertions(+), 4 deletions(-) > > > > diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h > > index 8370245..912391c 100644 > > --- a/include/uapi/linux/bpf.h > > +++ b/include/uapi/linux/bpf.h > > @@ -1500,6 +1500,10 @@ struct bpf_stack_build_id { > > * * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP **: > > * Use with ENCAP_L3 flags to further specify the tunnel type. > > * > > + * * **BPF_F_ADJ_ROOM_ENCAP_L2(len) **: > > + * Use with ENCAP_L3/L4 flags to further specify the tunnel > > + * type; **len** is the length of the inner MAC header. > > + * > > * A call to this helper is susceptible to change the underlaying > > * packet buffer. Therefore, at load time, all checks on pointers > > * previously done by the verifier are invalidated and must be > > @@ -2641,10 +2645,16 @@ enum bpf_func_id { > > /* BPF_FUNC_skb_adjust_room flags. */ > > #define BPF_F_ADJ_ROOM_FIXED_GSO (1ULL << 0) > > > > +#define BPF_ADJ_ROOM_ENCAP_L2_MASK 0xff > > +#define BPF_ADJ_ROOM_ENCAP_L2_SHIFT 56 > > Would appreciate a small whitespace cleanup in that tab after the define > is replaced with a normal space like in the rest of the file. > > > #define BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 (1ULL << 1) > > #define BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 (1ULL << 2) > > #define BPF_F_ADJ_ROOM_ENCAP_L4_GRE (1ULL << 3) > > #define BPF_F_ADJ_ROOM_ENCAP_L4_UDP (1ULL << 4) > > +#define BPF_F_ADJ_ROOM_ENCAP_L2(len) (((__u64)len & \ > > + BPF_ADJ_ROOM_ENCAP_L2_MASK) \ > > + << BPF_ADJ_ROOM_ENCAP_L2_SHIFT) > > Ditto here. > > > /* Mode for BPF_FUNC_skb_adjust_room helper. */ > > enum bpf_adj_room_mode { > > diff --git a/net/core/filter.c b/net/core/filter.c > > index 22eb2ed..a1654ef62 100644 > > --- a/net/core/filter.c > > +++ b/net/core/filter.c > > @@ -2969,11 +2969,14 @@ static u32 bpf_skb_net_base_len(const struct sk_buff *skb) > > #define BPF_F_ADJ_ROOM_MASK (BPF_F_ADJ_ROOM_FIXED_GSO | \ > > BPF_F_ADJ_ROOM_ENCAP_L3_MASK | \ > > BPF_F_ADJ_ROOM_ENCAP_L4_GRE | \ > > - BPF_F_ADJ_ROOM_ENCAP_L4_UDP) > > + BPF_F_ADJ_ROOM_ENCAP_L4_UDP | \ > > + BPF_F_ADJ_ROOM_ENCAP_L2( \ > > + BPF_ADJ_ROOM_ENCAP_L2_MASK)) > > > > static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff, > > u64 flags) > > { > > One thing that it seems missing in this but also in Willem's earlier set > is that we reject these flags in bpf_skb_net_shrink(). Both are called from > bpf_skb_adjust_room(), so if we don't support decap yet we should reject > such flags so we can extend in future. Could you or Willem send a follow-up? Indeed. Thanks for bringing that up, Daniel. I only thought of that after submitting the original patchset, too. Will send a patch.
On 04/11/2019 11:18 PM, Willem de Bruijn wrote: [...] >>> diff --git a/net/core/filter.c b/net/core/filter.c >>> index 22eb2ed..a1654ef62 100644 >>> --- a/net/core/filter.c >>> +++ b/net/core/filter.c >>> @@ -2969,11 +2969,14 @@ static u32 bpf_skb_net_base_len(const struct sk_buff *skb) >>> #define BPF_F_ADJ_ROOM_MASK (BPF_F_ADJ_ROOM_FIXED_GSO | \ >>> BPF_F_ADJ_ROOM_ENCAP_L3_MASK | \ >>> BPF_F_ADJ_ROOM_ENCAP_L4_GRE | \ >>> - BPF_F_ADJ_ROOM_ENCAP_L4_UDP) >>> + BPF_F_ADJ_ROOM_ENCAP_L4_UDP | \ >>> + BPF_F_ADJ_ROOM_ENCAP_L2( \ >>> + BPF_ADJ_ROOM_ENCAP_L2_MASK)) >>> >>> static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff, >>> u64 flags) >>> { >> >> One thing that it seems missing in this but also in Willem's earlier set >> is that we reject these flags in bpf_skb_net_shrink(). Both are called from >> bpf_skb_adjust_room(), so if we don't support decap yet we should reject >> such flags so we can extend in future. Could you or Willem send a follow-up? > > Indeed. Thanks for bringing that up, Daniel. I only thought of that > after submitting the original patchset, too. Will send a patch. Great, thanks, appreciated! :)
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 8370245..912391c 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1500,6 +1500,10 @@ struct bpf_stack_build_id { * * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP **: * Use with ENCAP_L3 flags to further specify the tunnel type. * + * * **BPF_F_ADJ_ROOM_ENCAP_L2(len) **: + * Use with ENCAP_L3/L4 flags to further specify the tunnel + * type; **len** is the length of the inner MAC header. + * * A call to this helper is susceptible to change the underlaying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be @@ -2641,10 +2645,16 @@ enum bpf_func_id { /* BPF_FUNC_skb_adjust_room flags. */ #define BPF_F_ADJ_ROOM_FIXED_GSO (1ULL << 0) +#define BPF_ADJ_ROOM_ENCAP_L2_MASK 0xff +#define BPF_ADJ_ROOM_ENCAP_L2_SHIFT 56 + #define BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 (1ULL << 1) #define BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 (1ULL << 2) #define BPF_F_ADJ_ROOM_ENCAP_L4_GRE (1ULL << 3) #define BPF_F_ADJ_ROOM_ENCAP_L4_UDP (1ULL << 4) +#define BPF_F_ADJ_ROOM_ENCAP_L2(len) (((__u64)len & \ + BPF_ADJ_ROOM_ENCAP_L2_MASK) \ + << BPF_ADJ_ROOM_ENCAP_L2_SHIFT) /* Mode for BPF_FUNC_skb_adjust_room helper. */ enum bpf_adj_room_mode { diff --git a/net/core/filter.c b/net/core/filter.c index 22eb2ed..a1654ef62 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -2969,11 +2969,14 @@ static u32 bpf_skb_net_base_len(const struct sk_buff *skb) #define BPF_F_ADJ_ROOM_MASK (BPF_F_ADJ_ROOM_FIXED_GSO | \ BPF_F_ADJ_ROOM_ENCAP_L3_MASK | \ BPF_F_ADJ_ROOM_ENCAP_L4_GRE | \ - BPF_F_ADJ_ROOM_ENCAP_L4_UDP) + BPF_F_ADJ_ROOM_ENCAP_L4_UDP | \ + BPF_F_ADJ_ROOM_ENCAP_L2( \ + BPF_ADJ_ROOM_ENCAP_L2_MASK)) static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff, u64 flags) { + u8 inner_mac_len = flags >> BPF_ADJ_ROOM_ENCAP_L2_SHIFT; bool encap = flags & BPF_F_ADJ_ROOM_ENCAP_L3_MASK; u16 mac_len = 0, inner_net = 0, inner_trans = 0; unsigned int gso_type = SKB_GSO_DODGY; @@ -3008,6 +3011,8 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff, mac_len = skb->network_header - skb->mac_header; inner_net = skb->network_header; + if (inner_mac_len > len_diff) + return -EINVAL; inner_trans = skb->transport_header; } @@ -3016,8 +3021,7 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff, return ret; if (encap) { - /* inner mac == inner_net on l3 encap */ - skb->inner_mac_header = inner_net; + skb->inner_mac_header = inner_net - inner_mac_len; skb->inner_network_header = inner_net; skb->inner_transport_header = inner_trans; skb_set_inner_protocol(skb, skb->protocol); @@ -3031,7 +3035,7 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff, gso_type |= SKB_GSO_GRE; else if (flags & BPF_F_ADJ_ROOM_ENCAP_L3_IPV6) gso_type |= SKB_GSO_IPXIP6; - else + else if (flags & BPF_F_ADJ_ROOM_ENCAP_L3_IPV4) gso_type |= SKB_GSO_IPXIP4; if (flags & BPF_F_ADJ_ROOM_ENCAP_L4_GRE ||
commit 868d523535c2 ("bpf: add bpf_skb_adjust_room encap flags") introduced support to bpf_skb_adjust_room for GSO-friendly GRE and UDP encapsulation. For GSO to work for skbs, the inner headers (mac and network) need to be marked. For L3 encapsulation using bpf_skb_adjust_room, the mac and network headers are identical. Here we provide a way of specifying the inner mac header length for cases where L2 encap is desired. Such an approach can support encapsulated ethernet headers, MPLS headers etc. For example to convert from a packet of form [eth][ip][tcp] to [eth][ip][udp][inner mac][ip][tcp], something like the following could be done: headroom = sizeof(iph) + sizeof(struct udphdr) + inner_maclen; ret = bpf_skb_adjust_room(skb, headroom, BPF_ADJ_ROOM_MAC, BPF_F_ADJ_ROOM_ENCAP_L4_UDP | BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 | BPF_F_ADJ_ROOM_ENCAP_L2(inner_maclen)); Signed-off-by: Alan Maguire <alan.maguire@oracle.com> --- include/uapi/linux/bpf.h | 10 ++++++++++ net/core/filter.c | 12 ++++++++---- 2 files changed, 18 insertions(+), 4 deletions(-)