| Message ID | 20190412045832.5109-1-andreas@kemnade.info (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3] ARM: sun8i: h3: bluetooth for Banana Pi M2 Zero board | expand |
On Fri, Apr 12, 2019 at 06:58:32AM +0200, Andreas Kemnade wrote: > The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip > with Broadcom internals attached to UART1 and some gpios. > This addition is in line with similar boards. > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Applied, thanks! Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index 1db2541135a7..57432d0500b1 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -69,6 +69,8 @@ compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -122,7 +124,20 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + }; + }; &usb_otg {
The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip with Broadcom internals attached to UART1 and some gpios. This addition is in line with similar boards. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> --- changes in v3: spelling fixes changes in v2: remove pinctrl things arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+)