| Message ID | 20190415235343.16565-1-angus@akkea.ca (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add support for the Purism Librem5 devkit | expand |
Hi Agnus, On 19-04-15 16:53, Angus Ainslie (Purism) wrote: > The Librem5 devkit is based on the imx8mq from NXP. This is a default > devicetree to boot the board to a command prompt. You should also provide a patch which adds the devicetree to the yaml file, see: Documentation/devicetree/bindings/arm/fsl.yaml. Thanks, Marco > > Changes since v3: > > Freshly sorted and pressed nodes. > Change the backlight to an interpolated scale. > Dropped i2c2. > Dropped devkit version number to match debian MR. > > Changes since v2: > > Fixed incorrect phy-supply for the fsl-fec. > Dropped unused regulator property. > Fixup Makefile for linux-next. > > Changes since v1: > > Dropped config file. > Updated the board compatible label. > Changed node names to follow naming conventions. > Added a more complete regulator hierachy. > Removed unused nodes. > Removed unknown devices. > Fixed comment style. > Dropped undocumented properties. > > Angus Ainslie (Purism) (2): > arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit > dt-bindings: Add an entry for Purism SPC > > .../devicetree/bindings/vendor-prefixes.txt | 1 + > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../dts/freescale/imx8mq-librem5-devkit.dts | 822 ++++++++++++++++++ > 3 files changed, 824 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts > > -- > 2.17.1 > > >
On 2019-04-16 00:58, Marco Felsch wrote: > Hi Agnus, > > On 19-04-15 16:53, Angus Ainslie (Purism) wrote: >> The Librem5 devkit is based on the imx8mq from NXP. This is a default >> devicetree to boot the board to a command prompt. > > You should also provide a patch which adds the devicetree to the yaml > file, see: Documentation/devicetree/bindings/arm/fsl.yaml. > Sure, what is that yaml file for ? Angus > Thanks, > Marco > >> >> Changes since v3: >> >> Freshly sorted and pressed nodes. >> Change the backlight to an interpolated scale. >> Dropped i2c2. >> Dropped devkit version number to match debian MR. >> >> Changes since v2: >> >> Fixed incorrect phy-supply for the fsl-fec. >> Dropped unused regulator property. >> Fixup Makefile for linux-next. >> >> Changes since v1: >> >> Dropped config file. >> Updated the board compatible label. >> Changed node names to follow naming conventions. >> Added a more complete regulator hierachy. >> Removed unused nodes. >> Removed unknown devices. >> Fixed comment style. >> Dropped undocumented properties. >> >> Angus Ainslie (Purism) (2): >> arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit >> dt-bindings: Add an entry for Purism SPC >> >> .../devicetree/bindings/vendor-prefixes.txt | 1 + >> arch/arm64/boot/dts/freescale/Makefile | 1 + >> .../dts/freescale/imx8mq-librem5-devkit.dts | 822 >> ++++++++++++++++++ >> 3 files changed, 824 insertions(+) >> create mode 100644 >> arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts >> >> -- >> 2.17.1 >> >> >>
On 19-04-16 09:38, Angus Ainslie wrote: > On 2019-04-16 00:58, Marco Felsch wrote: > > Hi Agnus, > > > > On 19-04-15 16:53, Angus Ainslie (Purism) wrote: > > > The Librem5 devkit is based on the imx8mq from NXP. This is a default > > > devicetree to boot the board to a command prompt. > > > > You should also provide a patch which adds the devicetree to the yaml > > file, see: Documentation/devicetree/bindings/arm/fsl.yaml. > > > > Sure, what is that yaml file for ? Thats for Rob's the validation: https://lwn.net/Articles/771621/ Regards, Marco > > Angus > > > Thanks, > > Marco > > > > > > > > Changes since v3: > > > > > > Freshly sorted and pressed nodes. > > > Change the backlight to an interpolated scale. > > > Dropped i2c2. > > > Dropped devkit version number to match debian MR. > > > > > > Changes since v2: > > > > > > Fixed incorrect phy-supply for the fsl-fec. > > > Dropped unused regulator property. > > > Fixup Makefile for linux-next. > > > > > > Changes since v1: > > > > > > Dropped config file. > > > Updated the board compatible label. > > > Changed node names to follow naming conventions. > > > Added a more complete regulator hierachy. > > > Removed unused nodes. > > > Removed unknown devices. > > > Fixed comment style. > > > Dropped undocumented properties. > > > > > > Angus Ainslie (Purism) (2): > > > arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit > > > dt-bindings: Add an entry for Purism SPC > > > > > > .../devicetree/bindings/vendor-prefixes.txt | 1 + > > > arch/arm64/boot/dts/freescale/Makefile | 1 + > > > .../dts/freescale/imx8mq-librem5-devkit.dts | 822 > > > ++++++++++++++++++ > > > 3 files changed, 824 insertions(+) > > > create mode 100644 > > > arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts > > > > > > -- > > > 2.17.1 > > > > > > > > > > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >