| Message ID | 1555487288-4777-3-git-send-email-l.luba@partner.samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | [1/3] include: dt-bindings: add Performance Monitoring Unit for Exynos | expand |
Hi Lukasz, On 19. 4. 17. 오후 4:48, Lukasz Luba wrote: > This patch adds posibility to choose what type of data should be counted > by the PPMU counter. Now the type comes from DT where the event has been > defined. When there is no 'event-data-type' the default value is used, > which is 'read data in bytes'. > It is needed when you want to know not only read+write data bytes but > i.e. only write data in byte, or number of read requests, etc. > > Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> > --- > drivers/devfreq/event/exynos-ppmu.c | 38 +++++++++++++++++++++++++------------ > include/linux/devfreq-event.h | 6 ++++++ > 2 files changed, 32 insertions(+), 12 deletions(-) > > diff --git a/drivers/devfreq/event/exynos-ppmu.c b/drivers/devfreq/event/exynos-ppmu.c > index c61de0b..e5f81a5 100644 > --- a/drivers/devfreq/event/exynos-ppmu.c > +++ b/drivers/devfreq/event/exynos-ppmu.c > @@ -140,6 +140,7 @@ static int exynos_ppmu_set_event(struct devfreq_event_dev *edev) > int id = exynos_ppmu_find_ppmu_id(edev); > int ret; > u32 pmnc, cntens; > + u32 evt_sel = edev->desc->data_type; > > if (id < 0) > return id; > @@ -154,9 +155,12 @@ static int exynos_ppmu_set_event(struct devfreq_event_dev *edev) > if (ret < 0) > return ret; > > - /* Set the event of Read/Write data count */ > - ret = regmap_write(info->regmap, PPMU_BEVTxSEL(id), > - PPMU_RO_DATA_CNT | PPMU_WO_DATA_CNT); > + /* Check if the data type has been defined in DT, use default if not */ > + if (evt_sel == UINT_MAX) > + evt_sel = PPMU_RO_DATA_CNT | PPMU_WO_DATA_CNT; > + > + /* Set the event of Read or Write or both (RDWR) data count */ > + ret = regmap_write(info->regmap, PPMU_BEVTxSEL(id), evt_sel); > if (ret < 0) > return ret; > > @@ -357,6 +361,7 @@ static int exynos_ppmu_v2_set_event(struct devfreq_event_dev *edev) > unsigned int pmnc, cntens; > int id = exynos_ppmu_find_ppmu_id(edev); > int ret; > + u32 evt_sel = edev->desc->data_type; > > /* Enable all counters */ > ret = regmap_read(info->regmap, PPMU_V2_CNTENS, &cntens); > @@ -368,24 +373,28 @@ static int exynos_ppmu_v2_set_event(struct devfreq_event_dev *edev) > if (ret < 0) > return ret; > > - /* Set the event of Read/Write data count */ > + > + /* Set the event of proper data type counting. > + * Check if the data type has been defined in DT, > + * use default if not. > + */ > switch (id) { > case PPMU_PMNCNT0: > case PPMU_PMNCNT1: > case PPMU_PMNCNT2: > - ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id), > - PPMU_V2_RO_DATA_CNT | PPMU_V2_WO_DATA_CNT); > - if (ret < 0) > - return ret; > + if (evt_sel == UINT_MAX) > + evt_sel = PPMU_V2_RO_DATA_CNT | PPMU_V2_WO_DATA_CNT; > break; > case PPMU_PMNCNT3: > - ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id), > - PPMU_V2_EVT3_RW_DATA_CNT); > - if (ret < 0) > - return ret; > + if (evt_sel == UINT_MAX) > + evt_sel = PPMU_V2_EVT3_RW_DATA_CNT; > break; > } > > + ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id), evt_sel); > + if (ret < 0) > + return ret; > + > /* Reset cycle counter/performance counter and enable PPMU */ > ret = regmap_read(info->regmap, PPMU_V2_PMNC, &pmnc); > if (ret < 0) > @@ -508,6 +517,7 @@ static int of_get_devfreq_events(struct device_node *np, > struct device *dev = info->dev; > struct device_node *events_np, *node; > int i, j, count; > + int ret; > > events_np = of_get_child_by_name(np, "events"); > if (!events_np) { > @@ -544,6 +554,10 @@ static int of_get_devfreq_events(struct device_node *np, > desc[j].driver_data = info; > > of_property_read_string(node, "event-name", &desc[j].name); > + ret = of_property_read_u32(node, "event-data-type", > + &desc[j].data_type); > + if (!ret) > + desc[i].data_type = UINT_MAX; I think that it is not proper to use 'UINT_MAX'. If you want to use the default value, you can initialize the 'desc[i].data_type' according to the device type or compatible name. For all exynos SoC except for exynos5433, desc[i].data_type = PPMU_RO_DATA_CNT | PPMU_WO_DATA_CNT; For exynos5433, desc[i].data_type = PPMU_V2_EVT3_RW_DATA_CNT; > > j++; > } > diff --git a/include/linux/devfreq-event.h b/include/linux/devfreq-event.h > index 4db00b0..cc160b1 100644 > --- a/include/linux/devfreq-event.h > +++ b/include/linux/devfreq-event.h > @@ -81,14 +81,20 @@ struct devfreq_event_ops { > * struct devfreq_event_desc - the descriptor of devfreq-event device > * > * @name : the name of devfreq-event device. > + * @data_type : the data type which is going to be counted in the register. > * @driver_data : the private data for devfreq-event driver. > * @ops : the operation to control devfreq-event device. > * > * Each devfreq-event device is described with a this structure. > * This structure contains the various data for devfreq-event device. > + * The data_type describes what is going to be counted in the register. > + * It might choose to count e.g. read requests, write data in bytes, etc. > + * The full supported list of types is present in specyfic header in: > + * include/dt-bindings/pmu/. Why did you make the path name as the 'pmu' instead of 'ppmu'? It might have some confusion because 'pmu' has the two meaning in linux kernel. - PMU, Power Management Unit - PMU, Performance Monitoring Unit > */ > struct devfreq_event_desc { > const char *name; > + u32 data_type; > void *driver_data; > > const struct devfreq_event_ops *ops; >
Hi Chanwoo, On 4/17/19 10:22 AM, Chanwoo Choi wrote: > Hi Lukasz, > > On 19. 4. 17. 오후 4:48, Lukasz Luba wrote: >> This patch adds posibility to choose what type of data should be counted >> by the PPMU counter. Now the type comes from DT where the event has been >> defined. When there is no 'event-data-type' the default value is used, >> which is 'read data in bytes'. >> It is needed when you want to know not only read+write data bytes but >> i.e. only write data in byte, or number of read requests, etc. >> >> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> >> --- >> drivers/devfreq/event/exynos-ppmu.c | 38 +++++++++++++++++++++++++------------ >> include/linux/devfreq-event.h | 6 ++++++ >> 2 files changed, 32 insertions(+), 12 deletions(-) >> >> diff --git a/drivers/devfreq/event/exynos-ppmu.c b/drivers/devfreq/event/exynos-ppmu.c >> index c61de0b..e5f81a5 100644 >> --- a/drivers/devfreq/event/exynos-ppmu.c >> +++ b/drivers/devfreq/event/exynos-ppmu.c >> @@ -140,6 +140,7 @@ static int exynos_ppmu_set_event(struct devfreq_event_dev *edev) >> int id = exynos_ppmu_find_ppmu_id(edev); >> int ret; >> u32 pmnc, cntens; >> + u32 evt_sel = edev->desc->data_type; >> >> if (id < 0) >> return id; >> @@ -154,9 +155,12 @@ static int exynos_ppmu_set_event(struct devfreq_event_dev *edev) >> if (ret < 0) >> return ret; >> >> - /* Set the event of Read/Write data count */ >> - ret = regmap_write(info->regmap, PPMU_BEVTxSEL(id), >> - PPMU_RO_DATA_CNT | PPMU_WO_DATA_CNT); >> + /* Check if the data type has been defined in DT, use default if not */ >> + if (evt_sel == UINT_MAX) >> + evt_sel = PPMU_RO_DATA_CNT | PPMU_WO_DATA_CNT; >> + >> + /* Set the event of Read or Write or both (RDWR) data count */ >> + ret = regmap_write(info->regmap, PPMU_BEVTxSEL(id), evt_sel); >> if (ret < 0) >> return ret; >> >> @@ -357,6 +361,7 @@ static int exynos_ppmu_v2_set_event(struct devfreq_event_dev *edev) >> unsigned int pmnc, cntens; >> int id = exynos_ppmu_find_ppmu_id(edev); >> int ret; >> + u32 evt_sel = edev->desc->data_type; >> >> /* Enable all counters */ >> ret = regmap_read(info->regmap, PPMU_V2_CNTENS, &cntens); >> @@ -368,24 +373,28 @@ static int exynos_ppmu_v2_set_event(struct devfreq_event_dev *edev) >> if (ret < 0) >> return ret; >> >> - /* Set the event of Read/Write data count */ >> + >> + /* Set the event of proper data type counting. >> + * Check if the data type has been defined in DT, >> + * use default if not. >> + */ >> switch (id) { >> case PPMU_PMNCNT0: >> case PPMU_PMNCNT1: >> case PPMU_PMNCNT2: >> - ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id), >> - PPMU_V2_RO_DATA_CNT | PPMU_V2_WO_DATA_CNT); >> - if (ret < 0) >> - return ret; >> + if (evt_sel == UINT_MAX) >> + evt_sel = PPMU_V2_RO_DATA_CNT | PPMU_V2_WO_DATA_CNT; >> break; >> case PPMU_PMNCNT3: >> - ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id), >> - PPMU_V2_EVT3_RW_DATA_CNT); >> - if (ret < 0) >> - return ret; >> + if (evt_sel == UINT_MAX) >> + evt_sel = PPMU_V2_EVT3_RW_DATA_CNT; >> break; >> } >> >> + ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id), evt_sel); >> + if (ret < 0) >> + return ret; >> + >> /* Reset cycle counter/performance counter and enable PPMU */ >> ret = regmap_read(info->regmap, PPMU_V2_PMNC, &pmnc); >> if (ret < 0) >> @@ -508,6 +517,7 @@ static int of_get_devfreq_events(struct device_node *np, >> struct device *dev = info->dev; >> struct device_node *events_np, *node; >> int i, j, count; >> + int ret; >> >> events_np = of_get_child_by_name(np, "events"); >> if (!events_np) { >> @@ -544,6 +554,10 @@ static int of_get_devfreq_events(struct device_node *np, >> desc[j].driver_data = info; >> >> of_property_read_string(node, "event-name", &desc[j].name); >> + ret = of_property_read_u32(node, "event-data-type", >> + &desc[j].data_type); >> + if (!ret) >> + desc[i].data_type = UINT_MAX; > > I think that it is not proper to use 'UINT_MAX'. > If you want to use the default value, you can initialize > the 'desc[i].data_type' according to the device type or compatible name. > > For all exynos SoC except for exynos5433, > desc[i].data_type = PPMU_RO_DATA_CNT | PPMU_WO_DATA_CNT; > > For exynos5433, > desc[i].data_type = PPMU_V2_EVT3_RW_DATA_CNT; > OK, I will set these default values here. >> >> j++; >> } >> diff --git a/include/linux/devfreq-event.h b/include/linux/devfreq-event.h >> index 4db00b0..cc160b1 100644 >> --- a/include/linux/devfreq-event.h >> +++ b/include/linux/devfreq-event.h >> @@ -81,14 +81,20 @@ struct devfreq_event_ops { >> * struct devfreq_event_desc - the descriptor of devfreq-event device >> * >> * @name : the name of devfreq-event device. >> + * @data_type : the data type which is going to be counted in the register. >> * @driver_data : the private data for devfreq-event driver. >> * @ops : the operation to control devfreq-event device. >> * >> * Each devfreq-event device is described with a this structure. >> * This structure contains the various data for devfreq-event device. >> + * The data_type describes what is going to be counted in the register. >> + * It might choose to count e.g. read requests, write data in bytes, etc. >> + * The full supported list of types is present in specyfic header in: >> + * include/dt-bindings/pmu/. > > Why did you make the path name as the 'pmu' instead of 'ppmu'? The directory may contain in future other Performance Monitoring Unit subsystems. In Exynos case we have: Platform Performance Monitoring Unit but different SoCs might have other names, like: System PMU. Since there is no 'pmu' in this directory, I am allocating it for Performance Monitoring Unit and not Power Management Unit. > > It might have some confusion because 'pmu' has > the two meaning in linux kernel. > - PMU, Power Management Unit > - PMU, Performance Monitoring Unit Regards, Lukasz > >> */ >> struct devfreq_event_desc { >> const char *name; >> + u32 data_type; >> void *driver_data; >> >> const struct devfreq_event_ops *ops; >> > >
diff --git a/drivers/devfreq/event/exynos-ppmu.c b/drivers/devfreq/event/exynos-ppmu.c index c61de0b..e5f81a5 100644 --- a/drivers/devfreq/event/exynos-ppmu.c +++ b/drivers/devfreq/event/exynos-ppmu.c @@ -140,6 +140,7 @@ static int exynos_ppmu_set_event(struct devfreq_event_dev *edev) int id = exynos_ppmu_find_ppmu_id(edev); int ret; u32 pmnc, cntens; + u32 evt_sel = edev->desc->data_type; if (id < 0) return id; @@ -154,9 +155,12 @@ static int exynos_ppmu_set_event(struct devfreq_event_dev *edev) if (ret < 0) return ret; - /* Set the event of Read/Write data count */ - ret = regmap_write(info->regmap, PPMU_BEVTxSEL(id), - PPMU_RO_DATA_CNT | PPMU_WO_DATA_CNT); + /* Check if the data type has been defined in DT, use default if not */ + if (evt_sel == UINT_MAX) + evt_sel = PPMU_RO_DATA_CNT | PPMU_WO_DATA_CNT; + + /* Set the event of Read or Write or both (RDWR) data count */ + ret = regmap_write(info->regmap, PPMU_BEVTxSEL(id), evt_sel); if (ret < 0) return ret; @@ -357,6 +361,7 @@ static int exynos_ppmu_v2_set_event(struct devfreq_event_dev *edev) unsigned int pmnc, cntens; int id = exynos_ppmu_find_ppmu_id(edev); int ret; + u32 evt_sel = edev->desc->data_type; /* Enable all counters */ ret = regmap_read(info->regmap, PPMU_V2_CNTENS, &cntens); @@ -368,24 +373,28 @@ static int exynos_ppmu_v2_set_event(struct devfreq_event_dev *edev) if (ret < 0) return ret; - /* Set the event of Read/Write data count */ + + /* Set the event of proper data type counting. + * Check if the data type has been defined in DT, + * use default if not. + */ switch (id) { case PPMU_PMNCNT0: case PPMU_PMNCNT1: case PPMU_PMNCNT2: - ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id), - PPMU_V2_RO_DATA_CNT | PPMU_V2_WO_DATA_CNT); - if (ret < 0) - return ret; + if (evt_sel == UINT_MAX) + evt_sel = PPMU_V2_RO_DATA_CNT | PPMU_V2_WO_DATA_CNT; break; case PPMU_PMNCNT3: - ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id), - PPMU_V2_EVT3_RW_DATA_CNT); - if (ret < 0) - return ret; + if (evt_sel == UINT_MAX) + evt_sel = PPMU_V2_EVT3_RW_DATA_CNT; break; } + ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id), evt_sel); + if (ret < 0) + return ret; + /* Reset cycle counter/performance counter and enable PPMU */ ret = regmap_read(info->regmap, PPMU_V2_PMNC, &pmnc); if (ret < 0) @@ -508,6 +517,7 @@ static int of_get_devfreq_events(struct device_node *np, struct device *dev = info->dev; struct device_node *events_np, *node; int i, j, count; + int ret; events_np = of_get_child_by_name(np, "events"); if (!events_np) { @@ -544,6 +554,10 @@ static int of_get_devfreq_events(struct device_node *np, desc[j].driver_data = info; of_property_read_string(node, "event-name", &desc[j].name); + ret = of_property_read_u32(node, "event-data-type", + &desc[j].data_type); + if (!ret) + desc[i].data_type = UINT_MAX; j++; } diff --git a/include/linux/devfreq-event.h b/include/linux/devfreq-event.h index 4db00b0..cc160b1 100644 --- a/include/linux/devfreq-event.h +++ b/include/linux/devfreq-event.h @@ -81,14 +81,20 @@ struct devfreq_event_ops { * struct devfreq_event_desc - the descriptor of devfreq-event device * * @name : the name of devfreq-event device. + * @data_type : the data type which is going to be counted in the register. * @driver_data : the private data for devfreq-event driver. * @ops : the operation to control devfreq-event device. * * Each devfreq-event device is described with a this structure. * This structure contains the various data for devfreq-event device. + * The data_type describes what is going to be counted in the register. + * It might choose to count e.g. read requests, write data in bytes, etc. + * The full supported list of types is present in specyfic header in: + * include/dt-bindings/pmu/. */ struct devfreq_event_desc { const char *name; + u32 data_type; void *driver_data; const struct devfreq_event_ops *ops;
This patch adds posibility to choose what type of data should be counted by the PPMU counter. Now the type comes from DT where the event has been defined. When there is no 'event-data-type' the default value is used, which is 'read data in bytes'. It is needed when you want to know not only read+write data bytes but i.e. only write data in byte, or number of read requests, etc. Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> --- drivers/devfreq/event/exynos-ppmu.c | 38 +++++++++++++++++++++++++------------ include/linux/devfreq-event.h | 6 ++++++ 2 files changed, 32 insertions(+), 12 deletions(-)