diff mbox series

[20/20] xen/arm: Allow cleaning the directory even when CONFIG_EARLY_PRINTK is set

Message ID 20190422164937.21350-21-julien.grall@arm.com (mailing list archive)
State Superseded
Headers show
Series xen/arm: Clean-up & fixes in boot/mm code | expand

Commit Message

Julien Grall April 22, 2019, 4:49 p.m. UTC
CONFIG_EARLY_PRINTK can only be set when CONFIG_DEBUG is enabled. It can
be quite convenient to only modify the target.

However, the target clean will not include the .config. This means
CONFIG_DEBUG is not enabled and therefore make will throw an error
preventing clean to continue.

The check is not moved at linking time.

Signed-off-by: Julien Grall <julien.grall@arm.com>

---

This code is pretty nasty, but I haven't found a better way for avoiding
to check if CONFIG_DEBUG is enabled when the target clean is called.

Ideally we will want to move CONFIG_EARLY_PRINTK in Kconfig. I haven't
had time yet to look at it properly so far.
---
 xen/arch/arm/Makefile | 5 +++++
 xen/arch/arm/Rules.mk | 7 -------
 2 files changed, 5 insertions(+), 7 deletions(-)

Comments

Julien Grall April 24, 2019, 3:14 p.m. UTC | #1
Hi,

Please ignore this patch. This was already sent separately.

Cheers,

On 22/04/2019 17:49, Julien Grall wrote:
> CONFIG_EARLY_PRINTK can only be set when CONFIG_DEBUG is enabled. It can
> be quite convenient to only modify the target.
> 
> However, the target clean will not include the .config. This means
> CONFIG_DEBUG is not enabled and therefore make will throw an error
> preventing clean to continue.
> 
> The check is not moved at linking time.
> 
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> 
> ---
> 
> This code is pretty nasty, but I haven't found a better way for avoiding
> to check if CONFIG_DEBUG is enabled when the target clean is called.
> 
> Ideally we will want to move CONFIG_EARLY_PRINTK in Kconfig. I haven't
> had time yet to look at it properly so far.
> ---
>   xen/arch/arm/Makefile | 5 +++++
>   xen/arch/arm/Rules.mk | 7 -------
>   2 files changed, 5 insertions(+), 7 deletions(-)
> 
> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
> index cb902cb6fe..fef508c836 100644
> --- a/xen/arch/arm/Makefile
> +++ b/xen/arch/arm/Makefile
> @@ -101,6 +101,11 @@ prelink.o: $(ALL_OBJS)
>   endif
>   
>   $(TARGET)-syms: prelink.o xen.lds
> +ifneq ($(CONFIG_EARLY_PRINTK), )
> +ifneq ($(CONFIG_DEBUG), y)
> +	$(error CONFIG_EARLY_PRINTK enabled for non-debug build)
> +endif
> +endif
>   	$(LD) $(LDFLAGS) -T xen.lds -N prelink.o \
>   	    $(BASEDIR)/common/symbols-dummy.o -o $(@D)/.$(@F).0
>   	$(NM) -pa --format=sysv $(@D)/.$(@F).0 \
> diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
> index f264592aef..12150986c5 100644
> --- a/xen/arch/arm/Rules.mk
> +++ b/xen/arch/arm/Rules.mk
> @@ -80,11 +80,4 @@ CFLAGS-$(EARLY_PRINTK) += -DEARLY_PRINTK_BAUD=$(EARLY_PRINTK_BAUD)
>   CFLAGS-$(EARLY_PRINTK) += -DEARLY_UART_BASE_ADDRESS=$(EARLY_UART_BASE_ADDRESS)
>   CFLAGS-$(EARLY_PRINTK) += -DEARLY_UART_REG_SHIFT=$(EARLY_UART_REG_SHIFT)
>   
> -else # !CONFIG_DEBUG
> -
> -ifneq ($(CONFIG_EARLY_PRINTK),)
> -# Early printk is dependant on a debug build.
> -$(error CONFIG_EARLY_PRINTK enabled for non-debug build)
> -endif
> -
>   endif
>
diff mbox series

Patch

diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
index cb902cb6fe..fef508c836 100644
--- a/xen/arch/arm/Makefile
+++ b/xen/arch/arm/Makefile
@@ -101,6 +101,11 @@  prelink.o: $(ALL_OBJS)
 endif
 
 $(TARGET)-syms: prelink.o xen.lds
+ifneq ($(CONFIG_EARLY_PRINTK), )
+ifneq ($(CONFIG_DEBUG), y)
+	$(error CONFIG_EARLY_PRINTK enabled for non-debug build)
+endif
+endif
 	$(LD) $(LDFLAGS) -T xen.lds -N prelink.o \
 	    $(BASEDIR)/common/symbols-dummy.o -o $(@D)/.$(@F).0
 	$(NM) -pa --format=sysv $(@D)/.$(@F).0 \
diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
index f264592aef..12150986c5 100644
--- a/xen/arch/arm/Rules.mk
+++ b/xen/arch/arm/Rules.mk
@@ -80,11 +80,4 @@  CFLAGS-$(EARLY_PRINTK) += -DEARLY_PRINTK_BAUD=$(EARLY_PRINTK_BAUD)
 CFLAGS-$(EARLY_PRINTK) += -DEARLY_UART_BASE_ADDRESS=$(EARLY_UART_BASE_ADDRESS)
 CFLAGS-$(EARLY_PRINTK) += -DEARLY_UART_REG_SHIFT=$(EARLY_UART_REG_SHIFT)
 
-else # !CONFIG_DEBUG
-
-ifneq ($(CONFIG_EARLY_PRINTK),)
-# Early printk is dependant on a debug build.
-$(error CONFIG_EARLY_PRINTK enabled for non-debug build)
-endif
-
 endif