| Message ID | 20190425091250.3625-1-ghe@suse.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ocfs2: add last unlock times in locking_state | expand |
Hi Gang, On 19/4/25 17:12, Gang He wrote: > ocfs2 file system uses locking_state file under debugfs to dump > each ocfs2 file system's dlm lock resources, but the dlm lock > resources in memory are becoming more and more after the files > were touched by the user. it will become a bit difficult to analyze > these dlm lock resource records in locking_state file by the upper > scripts, though some files are not active for now, which were > accessed long time ago. > Then, I'd like to add last pr/ex unlock times in locking_state file > for each dlm lock resource record, the the upper scripts can use > last unlock time to filter inactive dlm lock resource record. > > Signed-off-by: Gang He <ghe@suse.com> > --- > fs/ocfs2/dlmglue.c | 21 +++++++++++++++++---- > fs/ocfs2/ocfs2.h | 1 + > 2 files changed, 18 insertions(+), 4 deletions(-) > > diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c > index af405586c5b1..dccf4136f8c1 100644 > --- a/fs/ocfs2/dlmglue.c > +++ b/fs/ocfs2/dlmglue.c > @@ -448,7 +448,7 @@ static void ocfs2_update_lock_stats(struct ocfs2_lock_res *res, int level, > struct ocfs2_mask_waiter *mw, int ret) > { > u32 usec; > - ktime_t kt; > + ktime_t last, kt; > struct ocfs2_lock_stats *stats; > > if (level == LKM_PRMODE) > @@ -458,7 +458,8 @@ static void ocfs2_update_lock_stats(struct ocfs2_lock_res *res, int level, > else > return; > > - kt = ktime_sub(ktime_get(), mw->mw_lock_start); > + last = ktime_get(); > + kt = ktime_sub(last, mw->mw_lock_start); > usec = ktime_to_us(kt); > > stats->ls_gets++; > @@ -474,6 +475,8 @@ static void ocfs2_update_lock_stats(struct ocfs2_lock_res *res, int level, > > if (ret) > stats->ls_fail++; > + > + stats->ls_last = ktime_to_timespec(last).tv_sec; > } > > static inline void ocfs2_track_lock_refresh(struct ocfs2_lock_res *lockres) > @@ -3093,8 +3096,10 @@ static void *ocfs2_dlm_seq_next(struct seq_file *m, void *v, loff_t *pos) > * - Lock stats printed > * New in version 3 > * - Max time in lock stats is in usecs (instead of nsecs) > + * New in version 4 > + * - Add last pr/ex unlock times in secs Why not usecs? BTW, should we change tools side like debugfs as well? Thanks, Joseph > */ > -#define OCFS2_DLM_DEBUG_STR_VERSION 3 > +#define OCFS2_DLM_DEBUG_STR_VERSION 4 > static int ocfs2_dlm_seq_show(struct seq_file *m, void *v) > { > int i; > @@ -3145,6 +3150,8 @@ static int ocfs2_dlm_seq_show(struct seq_file *m, void *v) > # define lock_max_prmode(_l) ((_l)->l_lock_prmode.ls_max) > # define lock_max_exmode(_l) ((_l)->l_lock_exmode.ls_max) > # define lock_refresh(_l) ((_l)->l_lock_refresh) > +# define lock_last_prmode(_l) ((_l)->l_lock_prmode.ls_last) > +# define lock_last_exmode(_l) ((_l)->l_lock_exmode.ls_last) > #else > # define lock_num_prmode(_l) (0) > # define lock_num_exmode(_l) (0) > @@ -3155,6 +3162,8 @@ static int ocfs2_dlm_seq_show(struct seq_file *m, void *v) > # define lock_max_prmode(_l) (0) > # define lock_max_exmode(_l) (0) > # define lock_refresh(_l) (0) > +# define lock_last_prmode(_l) (0) > +# define lock_last_exmode(_l) (0) > #endif > /* The following seq_print was added in version 2 of this output */ > seq_printf(m, "%u\t" > @@ -3165,6 +3174,8 @@ static int ocfs2_dlm_seq_show(struct seq_file *m, void *v) > "%llu\t" > "%u\t" > "%u\t" > + "%u\t" > + "%u\t" > "%u\t", > lock_num_prmode(lockres), > lock_num_exmode(lockres), > @@ -3174,7 +3185,9 @@ static int ocfs2_dlm_seq_show(struct seq_file *m, void *v) > lock_total_exmode(lockres), > lock_max_prmode(lockres), > lock_max_exmode(lockres), > - lock_refresh(lockres)); > + lock_refresh(lockres), > + lock_last_prmode(lockres), > + lock_last_exmode(lockres)); > > /* End the line */ > seq_printf(m, "\n"); > diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h > index 1f029fbe8b8d..8efa022684f4 100644 > --- a/fs/ocfs2/ocfs2.h > +++ b/fs/ocfs2/ocfs2.h > @@ -164,6 +164,7 @@ struct ocfs2_lock_stats { > > /* Storing max wait in usecs saves 24 bytes per inode */ > u32 ls_max; /* Max wait in USEC */ > + u32 ls_last; /* Last unlock time in SEC */ > }; > #endif > >
Hello Joseph, >>> On 4/26/2019 at 9:21 am, in message <c855abce-d62c-5fe0-3b31-c252077b4530@gmail.com>, Joseph Qi <jiangqi903@gmail.com> wrote: > Hi Gang, > > On 19/4/25 17:12, Gang He wrote: >> ocfs2 file system uses locking_state file under debugfs to dump >> each ocfs2 file system's dlm lock resources, but the dlm lock >> resources in memory are becoming more and more after the files >> were touched by the user. it will become a bit difficult to analyze >> these dlm lock resource records in locking_state file by the upper >> scripts, though some files are not active for now, which were >> accessed long time ago. >> Then, I'd like to add last pr/ex unlock times in locking_state file >> for each dlm lock resource record, the the upper scripts can use >> last unlock time to filter inactive dlm lock resource record. >> >> Signed-off-by: Gang He <ghe@suse.com> >> --- >> fs/ocfs2/dlmglue.c | 21 +++++++++++++++++---- >> fs/ocfs2/ocfs2.h | 1 + >> 2 files changed, 18 insertions(+), 4 deletions(-) >> >> diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c >> index af405586c5b1..dccf4136f8c1 100644 >> --- a/fs/ocfs2/dlmglue.c >> +++ b/fs/ocfs2/dlmglue.c >> @@ -448,7 +448,7 @@ static void ocfs2_update_lock_stats(struct > ocfs2_lock_res *res, int level, >> struct ocfs2_mask_waiter *mw, int ret) >> { >> u32 usec; >> - ktime_t kt; >> + ktime_t last, kt; >> struct ocfs2_lock_stats *stats; >> >> if (level == LKM_PRMODE) >> @@ -458,7 +458,8 @@ static void ocfs2_update_lock_stats(struct > ocfs2_lock_res *res, int level, >> else >> return; >> >> - kt = ktime_sub(ktime_get(), mw->mw_lock_start); >> + last = ktime_get(); >> + kt = ktime_sub(last, mw->mw_lock_start); >> usec = ktime_to_us(kt); >> >> stats->ls_gets++; >> @@ -474,6 +475,8 @@ static void ocfs2_update_lock_stats(struct > ocfs2_lock_res *res, int level, >> >> if (ret) >> stats->ls_fail++; >> + >> + stats->ls_last = ktime_to_timespec(last).tv_sec; >> } >> >> static inline void ocfs2_track_lock_refresh(struct ocfs2_lock_res *lockres) >> @@ -3093,8 +3096,10 @@ static void *ocfs2_dlm_seq_next(struct seq_file *m, > void *v, loff_t *pos) >> * - Lock stats printed >> * New in version 3 >> * - Max time in lock stats is in usecs (instead of nsecs) >> + * New in version 4 >> + * - Add last pr/ex unlock times in secs > > Why not usecs? The time is the seconds from the system boot, just like uptime command. I feel the user do not care more accurate time, secondly, the u32 type can keep more long time until it overflows. > BTW, should we change tools side like debugfs as well? Theoretically, the format will affect the upper debugfs.ocfs2 tool, but, I quickly look at this part code of debugfs.ocfs2, this part code looks has been dead. Anyway, I will look at this part carefully, if it still works, I will do the corresponding change. Thanks Gang > > Thanks, > Joseph > >> */ >> -#define OCFS2_DLM_DEBUG_STR_VERSION 3 >> +#define OCFS2_DLM_DEBUG_STR_VERSION 4 >> static int ocfs2_dlm_seq_show(struct seq_file *m, void *v) >> { >> int i; >> @@ -3145,6 +3150,8 @@ static int ocfs2_dlm_seq_show(struct seq_file *m, void > *v) >> # define lock_max_prmode(_l) ((_l)->l_lock_prmode.ls_max) >> # define lock_max_exmode(_l) ((_l)->l_lock_exmode.ls_max) >> # define lock_refresh(_l) ((_l)->l_lock_refresh) >> +# define lock_last_prmode(_l) ((_l)->l_lock_prmode.ls_last) >> +# define lock_last_exmode(_l) ((_l)->l_lock_exmode.ls_last) >> #else >> # define lock_num_prmode(_l) (0) >> # define lock_num_exmode(_l) (0) >> @@ -3155,6 +3162,8 @@ static int ocfs2_dlm_seq_show(struct seq_file *m, void > *v) >> # define lock_max_prmode(_l) (0) >> # define lock_max_exmode(_l) (0) >> # define lock_refresh(_l) (0) >> +# define lock_last_prmode(_l) (0) >> +# define lock_last_exmode(_l) (0) >> #endif >> /* The following seq_print was added in version 2 of this output */ >> seq_printf(m, "%u\t" >> @@ -3165,6 +3174,8 @@ static int ocfs2_dlm_seq_show(struct seq_file *m, void > *v) >> "%llu\t" >> "%u\t" >> "%u\t" >> + "%u\t" >> + "%u\t" >> "%u\t", >> lock_num_prmode(lockres), >> lock_num_exmode(lockres), >> @@ -3174,7 +3185,9 @@ static int ocfs2_dlm_seq_show(struct seq_file *m, void > *v) >> lock_total_exmode(lockres), >> lock_max_prmode(lockres), >> lock_max_exmode(lockres), >> - lock_refresh(lockres)); >> + lock_refresh(lockres), >> + lock_last_prmode(lockres), >> + lock_last_exmode(lockres)); >> >> /* End the line */ >> seq_printf(m, "\n"); >> diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h >> index 1f029fbe8b8d..8efa022684f4 100644 >> --- a/fs/ocfs2/ocfs2.h >> +++ b/fs/ocfs2/ocfs2.h >> @@ -164,6 +164,7 @@ struct ocfs2_lock_stats { >> >> /* Storing max wait in usecs saves 24 bytes per inode */ >> u32 ls_max; /* Max wait in USEC */ >> + u32 ls_last; /* Last unlock time in SEC */ >> }; >> #endif >> >>
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index af405586c5b1..dccf4136f8c1 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -448,7 +448,7 @@ static void ocfs2_update_lock_stats(struct ocfs2_lock_res *res, int level, struct ocfs2_mask_waiter *mw, int ret) { u32 usec; - ktime_t kt; + ktime_t last, kt; struct ocfs2_lock_stats *stats; if (level == LKM_PRMODE) @@ -458,7 +458,8 @@ static void ocfs2_update_lock_stats(struct ocfs2_lock_res *res, int level, else return; - kt = ktime_sub(ktime_get(), mw->mw_lock_start); + last = ktime_get(); + kt = ktime_sub(last, mw->mw_lock_start); usec = ktime_to_us(kt); stats->ls_gets++; @@ -474,6 +475,8 @@ static void ocfs2_update_lock_stats(struct ocfs2_lock_res *res, int level, if (ret) stats->ls_fail++; + + stats->ls_last = ktime_to_timespec(last).tv_sec; } static inline void ocfs2_track_lock_refresh(struct ocfs2_lock_res *lockres) @@ -3093,8 +3096,10 @@ static void *ocfs2_dlm_seq_next(struct seq_file *m, void *v, loff_t *pos) * - Lock stats printed * New in version 3 * - Max time in lock stats is in usecs (instead of nsecs) + * New in version 4 + * - Add last pr/ex unlock times in secs */ -#define OCFS2_DLM_DEBUG_STR_VERSION 3 +#define OCFS2_DLM_DEBUG_STR_VERSION 4 static int ocfs2_dlm_seq_show(struct seq_file *m, void *v) { int i; @@ -3145,6 +3150,8 @@ static int ocfs2_dlm_seq_show(struct seq_file *m, void *v) # define lock_max_prmode(_l) ((_l)->l_lock_prmode.ls_max) # define lock_max_exmode(_l) ((_l)->l_lock_exmode.ls_max) # define lock_refresh(_l) ((_l)->l_lock_refresh) +# define lock_last_prmode(_l) ((_l)->l_lock_prmode.ls_last) +# define lock_last_exmode(_l) ((_l)->l_lock_exmode.ls_last) #else # define lock_num_prmode(_l) (0) # define lock_num_exmode(_l) (0) @@ -3155,6 +3162,8 @@ static int ocfs2_dlm_seq_show(struct seq_file *m, void *v) # define lock_max_prmode(_l) (0) # define lock_max_exmode(_l) (0) # define lock_refresh(_l) (0) +# define lock_last_prmode(_l) (0) +# define lock_last_exmode(_l) (0) #endif /* The following seq_print was added in version 2 of this output */ seq_printf(m, "%u\t" @@ -3165,6 +3174,8 @@ static int ocfs2_dlm_seq_show(struct seq_file *m, void *v) "%llu\t" "%u\t" "%u\t" + "%u\t" + "%u\t" "%u\t", lock_num_prmode(lockres), lock_num_exmode(lockres), @@ -3174,7 +3185,9 @@ static int ocfs2_dlm_seq_show(struct seq_file *m, void *v) lock_total_exmode(lockres), lock_max_prmode(lockres), lock_max_exmode(lockres), - lock_refresh(lockres)); + lock_refresh(lockres), + lock_last_prmode(lockres), + lock_last_exmode(lockres)); /* End the line */ seq_printf(m, "\n"); diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index 1f029fbe8b8d..8efa022684f4 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -164,6 +164,7 @@ struct ocfs2_lock_stats { /* Storing max wait in usecs saves 24 bytes per inode */ u32 ls_max; /* Max wait in USEC */ + u32 ls_last; /* Last unlock time in SEC */ }; #endif
ocfs2 file system uses locking_state file under debugfs to dump each ocfs2 file system's dlm lock resources, but the dlm lock resources in memory are becoming more and more after the files were touched by the user. it will become a bit difficult to analyze these dlm lock resource records in locking_state file by the upper scripts, though some files are not active for now, which were accessed long time ago. Then, I'd like to add last pr/ex unlock times in locking_state file for each dlm lock resource record, the the upper scripts can use last unlock time to filter inactive dlm lock resource record. Signed-off-by: Gang He <ghe@suse.com> --- fs/ocfs2/dlmglue.c | 21 +++++++++++++++++---- fs/ocfs2/ocfs2.h | 1 + 2 files changed, 18 insertions(+), 4 deletions(-)