diff mbox series

[v5,1/7] ARM: dts: sun8i: r40: bananapi-m2-ultra: Add GPIO pin-bank regulator supplies

Message ID 1556040365-10913-2-git-send-email-pgreco@centosproject.org (mailing list archive)
State New, archived
Headers show
Series ARM: dts: sun8i: v40 Rewrite BPi M2 Berry DTS based on BPi M2 Ultra | expand

Commit Message

Pablo Sebastián Greco April 23, 2019, 5:25 p.m. UTC 
The bananapi-m2-ultra has the PMIC providing voltage to all the pin-bank
supply rails from its various regulator outputs, tie them to the pio
node.

Signed-off-by: Pablo Greco <pgreco@centosproject.org>
---
 arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Maxime Ripard May 2, 2019, 7:37 a.m. UTC | #1 
On Tue, Apr 23, 2019 at 02:25:58PM -0300, Pablo Greco wrote:
> The bananapi-m2-ultra has the PMIC providing voltage to all the pin-bank
> supply rails from its various regulator outputs, tie them to the pio
> node.
>
> Signed-off-by: Pablo Greco <pgreco@centosproject.org>

Queued for 5.3, thanks!
Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index c488aaa..699579d 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -201,6 +201,12 @@ 
 &pio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo1>;
 };
 
 &reg_aldo2 {