| Message ID | 20190506130046.20898-1-m.szyprowski@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | usb: dwc2: Force 8bit UTMI width for Samsung Exynos SoCs | expand |
Hi, On Mon, May 06, 2019 at 03:00:46PM +0200, Marek Szyprowski wrote: > Samsung Exynos SoCs require to force UTMI width to 8bit, otherwise the > host side of the shared USB2 PHY doesn't work. > > Reported-by: Krzysztof Kozlowski <krzk@kernel.org> > Fixes: 707d80f0a3c5 ("usb: dwc2: gadget: Replace phyif with phy_utmi_width") > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > drivers/usb/dwc2/params.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c > index 6900eea57526..9ece4affb9d4 100644 > --- a/drivers/usb/dwc2/params.c > +++ b/drivers/usb/dwc2/params.c > @@ -76,6 +76,7 @@ static void dwc2_set_s3c6400_params(struct dwc2_hsotg *hsotg) > struct dwc2_core_params *p = &hsotg->params; > > p->power_down = 0; > + p->phy_utmi_width = 8; Nice catch. I though that 8bits would be the default value, I am curious to know why it's not ny default at 8. Thanks. --- Jules > } > > static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg) > -- > 2.17.1 >
On 5/6/2019 5:01 PM, Marek Szyprowski wrote: > Samsung Exynos SoCs require to force UTMI width to 8bit, otherwise the > host side of the shared USB2 PHY doesn't work. > > Reported-by: Krzysztof Kozlowski <krzk@kernel.org> > Fixes: 707d80f0a3c5 ("usb: dwc2: gadget: Replace phyif with phy_utmi_width") > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> > --- > drivers/usb/dwc2/params.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c > index 6900eea57526..9ece4affb9d4 100644 > --- a/drivers/usb/dwc2/params.c > +++ b/drivers/usb/dwc2/params.c > @@ -76,6 +76,7 @@ static void dwc2_set_s3c6400_params(struct dwc2_hsotg *hsotg) > struct dwc2_core_params *p = &hsotg->params; > > p->power_down = 0; > + p->phy_utmi_width = 8; > } > > static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg) >
Hi Marek, your patch did not help on stable v5.1 [ 3.255963] samsung-usb2-phy 125b0000.exynos-usbphy: 125b0000.exynos-usbphy supply vbus not found, using dummy regulator [ 4.044547] usbcore: registered new interface driver smsc95xx [ 4.112261] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 [ 4.120363] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.127560] usb usb1: Product: EHCI Host Controller [ 4.132415] usb usb1: Manufacturer: Linux 5.1.0-00005-geb4efae48eb5 ehci_hcd [ 4.139446] usb usb1: SerialNumber: 12580000.ehci [ 4.183056] usb3503 0-0008: switched to HUB mode [ 4.183121] usb3503 0-0008: usb3503_probe: probed in hub mode [ 4.488344] usb 1-2: new high-speed USB device number 2 using exynos-ehci [ 4.675605] usb 1-2: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 [ 4.678166] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.686140] usb 1-2: skipping disabled interface 0 root@odroid-x2:~# lsusb Bus 001 Device 002: ID 0424:3503 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Am 06.05.19 um 15:00 schrieb Marek Szyprowski: > Samsung Exynos SoCs require to force UTMI width to 8bit, otherwise the > host side of the shared USB2 PHY doesn't work. > > Reported-by: Krzysztof Kozlowski <krzk@kernel.org> > Fixes: 707d80f0a3c5 ("usb: dwc2: gadget: Replace phyif with phy_utmi_width") > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > drivers/usb/dwc2/params.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c > index 6900eea57526..9ece4affb9d4 100644 > --- a/drivers/usb/dwc2/params.c > +++ b/drivers/usb/dwc2/params.c > @@ -76,6 +76,7 @@ static void dwc2_set_s3c6400_params(struct dwc2_hsotg *hsotg) > struct dwc2_core_params *p = &hsotg->params; > > p->power_down = 0; > + p->phy_utmi_width = 8; > } > > static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg) > Gruß,
Hi Markus, On 2019-05-07 10:12, Markus Reichl wrote: > Hi Marek, > > your patch did not help on stable v5.1 > > [ 3.255963] samsung-usb2-phy 125b0000.exynos-usbphy: 125b0000.exynos-usbphy supply vbus not found, using dummy regulator > [ 4.044547] usbcore: registered new interface driver smsc95xx > [ 4.112261] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 > [ 4.120363] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 4.127560] usb usb1: Product: EHCI Host Controller > [ 4.132415] usb usb1: Manufacturer: Linux 5.1.0-00005-geb4efae48eb5 ehci_hcd > [ 4.139446] usb usb1: SerialNumber: 12580000.ehci > [ 4.183056] usb3503 0-0008: switched to HUB mode > [ 4.183121] usb3503 0-0008: usb3503_probe: probed in hub mode > [ 4.488344] usb 1-2: new high-speed USB device number 2 using exynos-ehci > [ 4.675605] usb 1-2: New USB device found, idVendor=0424, idProduct=3503, bcdDevice=a1.a0 > [ 4.678166] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > [ 4.686140] usb 1-2: skipping disabled interface 0 > > root@odroid-x2:~# lsusb > Bus 001 Device 002: ID 0424:3503 Standard Microsystems Corp. > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub This patch fixes the issue introduced by "usb: dwc2: gadget: Replace phyif with phy_utmi_width" commit, which is queued only to linux-next so far. Stable v5.1 doesn't include it, so the fix doesn't change anything on v5.1. I've checked and OdroidU3 works fine with v5.1 release, but X2 fails to detect USB devices. I will investigate this in a few minutes... Best regards
Hi All, On 2019-05-07 11:17, Marek Szyprowski wrote: > Hi Markus, > > On 2019-05-07 10:12, Markus Reichl wrote: >> Hi Marek, >> >> your patch did not help on stable v5.1 >> >> [ 3.255963] samsung-usb2-phy 125b0000.exynos-usbphy: >> 125b0000.exynos-usbphy supply vbus not found, using dummy regulator >> [ 4.044547] usbcore: registered new interface driver smsc95xx >> [ 4.112261] usb usb1: New USB device found, idVendor=1d6b, >> idProduct=0002, bcdDevice= 5.01 >> [ 4.120363] usb usb1: New USB device strings: Mfr=3, Product=2, >> SerialNumber=1 >> [ 4.127560] usb usb1: Product: EHCI Host Controller >> [ 4.132415] usb usb1: Manufacturer: Linux >> 5.1.0-00005-geb4efae48eb5 ehci_hcd >> [ 4.139446] usb usb1: SerialNumber: 12580000.ehci >> [ 4.183056] usb3503 0-0008: switched to HUB mode >> [ 4.183121] usb3503 0-0008: usb3503_probe: probed in hub mode >> [ 4.488344] usb 1-2: new high-speed USB device number 2 using >> exynos-ehci >> [ 4.675605] usb 1-2: New USB device found, idVendor=0424, >> idProduct=3503, bcdDevice=a1.a0 >> [ 4.678166] usb 1-2: New USB device strings: Mfr=0, Product=0, >> SerialNumber=0 >> [ 4.686140] usb 1-2: skipping disabled interface 0 >> >> root@odroid-x2:~# lsusb >> Bus 001 Device 002: ID 0424:3503 Standard Microsystems Corp. >> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > This patch fixes the issue introduced by "usb: dwc2: gadget: Replace > phyif with phy_utmi_width" commit, which is queued only to linux-next > so far. Stable v5.1 doesn't include it, so the fix doesn't change > anything on v5.1. > > I've checked and OdroidU3 works fine with v5.1 release, but X2 fails > to detect USB devices. I will investigate this in a few minutes... Broken USB on X2 is caused by commit 01fdf179f4b064d4c9d30b39aba178caf32649f4 ("usb: core: skip interfaces disabled in devicetree"). I looks that the mentioned commit conflicts with the Exynos EHCI and OHCI bindings and the way the PHY ports are defined for those drivers. It worked on U3 only by the pure coincidence. This is probably a "minimal" fix for this issue: diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 82239f27c4cc..cd455c4add25 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -2007,6 +2007,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration) struct usb_interface *intf = cp->interface[i]; if (intf->dev.of_node && + of_device_is_compatible(intf->dev.of_node, NULL) && !of_device_is_available(intf->dev.of_node)) { dev_info(&dev->dev, "skipping disabled interface %d\n", intf->cur_altsetting->desc.bInterfaceNumber); I will try to describe the problem in details and discuss it on the usb mailing list. Best regards
Hi Marek, Am 07.05.19 um 14:03 schrieb Marek Szyprowski: > Hi All, > > On 2019-05-07 11:17, Marek Szyprowski wrote: >> Hi Markus, >> >> On 2019-05-07 10:12, Markus Reichl wrote: >>> Hi Marek, >>> >>> your patch did not help on stable v5.1 >>> >>> [ 3.255963] samsung-usb2-phy 125b0000.exynos-usbphy: >>> 125b0000.exynos-usbphy supply vbus not found, using dummy regulator >>> [ 4.044547] usbcore: registered new interface driver smsc95xx >>> [ 4.112261] usb usb1: New USB device found, idVendor=1d6b, >>> idProduct=0002, bcdDevice= 5.01 >>> [ 4.120363] usb usb1: New USB device strings: Mfr=3, Product=2, >>> SerialNumber=1 >>> [ 4.127560] usb usb1: Product: EHCI Host Controller >>> [ 4.132415] usb usb1: Manufacturer: Linux >>> 5.1.0-00005-geb4efae48eb5 ehci_hcd >>> [ 4.139446] usb usb1: SerialNumber: 12580000.ehci >>> [ 4.183056] usb3503 0-0008: switched to HUB mode >>> [ 4.183121] usb3503 0-0008: usb3503_probe: probed in hub mode >>> [ 4.488344] usb 1-2: new high-speed USB device number 2 using >>> exynos-ehci >>> [ 4.675605] usb 1-2: New USB device found, idVendor=0424, >>> idProduct=3503, bcdDevice=a1.a0 >>> [ 4.678166] usb 1-2: New USB device strings: Mfr=0, Product=0, >>> SerialNumber=0 >>> [ 4.686140] usb 1-2: skipping disabled interface 0 >>> >>> root@odroid-x2:~# lsusb >>> Bus 001 Device 002: ID 0424:3503 Standard Microsystems Corp. >>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >> >> This patch fixes the issue introduced by "usb: dwc2: gadget: Replace >> phyif with phy_utmi_width" commit, which is queued only to linux-next >> so far. Stable v5.1 doesn't include it, so the fix doesn't change >> anything on v5.1. >> >> I've checked and OdroidU3 works fine with v5.1 release, but X2 fails >> to detect USB devices. I will investigate this in a few minutes... > > > Broken USB on X2 is caused by commit > 01fdf179f4b064d4c9d30b39aba178caf32649f4 ("usb: core: skip interfaces > disabled in devicetree"). > > I looks that the mentioned commit conflicts with the Exynos EHCI and > OHCI bindings and the way the PHY ports are defined for those drivers. > It worked on U3 only by the pure coincidence. This is probably a > "minimal" fix for this issue: Thanks Marek, below fix enables USB on Odroid-X2 with stable v5.1. > > diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c > index 82239f27c4cc..cd455c4add25 100644 > --- a/drivers/usb/core/message.c > +++ b/drivers/usb/core/message.c > @@ -2007,6 +2007,7 @@ int usb_set_configuration(struct usb_device *dev, > int configuration) > struct usb_interface *intf = cp->interface[i]; > > if (intf->dev.of_node && > + of_device_is_compatible(intf->dev.of_node, NULL) && > !of_device_is_available(intf->dev.of_node)) { > dev_info(&dev->dev, "skipping disabled > interface %d\n", > intf->cur_altsetting->desc.bInterfaceNumber); > > I will try to describe the problem in details and discuss it on the usb > mailing list. > > Best regards > Gruß,
On Mon, 6 May 2019 at 15:00, Marek Szyprowski <m.szyprowski@samsung.com> wrote: > > Samsung Exynos SoCs require to force UTMI width to 8bit, otherwise the > host side of the shared USB2 PHY doesn't work. > > Reported-by: Krzysztof Kozlowski <krzk@kernel.org> > Fixes: 707d80f0a3c5 ("usb: dwc2: gadget: Replace phyif with phy_utmi_width") > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Best regards, Krzysztof
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 6900eea57526..9ece4affb9d4 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -76,6 +76,7 @@ static void dwc2_set_s3c6400_params(struct dwc2_hsotg *hsotg) struct dwc2_core_params *p = &hsotg->params; p->power_down = 0; + p->phy_utmi_width = 8; } static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg)
Samsung Exynos SoCs require to force UTMI width to 8bit, otherwise the host side of the shared USB2 PHY doesn't work. Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 707d80f0a3c5 ("usb: dwc2: gadget: Replace phyif with phy_utmi_width") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- drivers/usb/dwc2/params.c | 1 + 1 file changed, 1 insertion(+)