| Message ID | 20190515082326.6449-1-marek.vasut@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [V2] ARM: dts: r8a779x: Configure PMIC IRQ pinmux | expand |
Hi Marek, On Wed, May 15, 2019 at 10:23 AM <marek.vasut@gmail.com> wrote: > From: Marek Vasut <marek.vasut+renesas@gmail.com> > > The PMIC IRQ line pin multiplexing configuration is missing from the DTs. > Since the line is configured correctly by default, the system works fine. > However, add the IRQ line pin multiplexing configuration for completeness. > > Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> > Cc: Geert Uytterhoeven <geert+renesas@glider.be> > Cc: Simon Horman <horms+renesas@verge.net.au> > Cc: linux-renesas-soc@vger.kernel.org > To: linux-arm-kernel@lists.infradead.org > --- > V2: Move the pin control node from iic3 controller to pmic on 7792 Blanche, > since there's only one PMIC on that board. Thanks for the update! As the tag condition from v1 is now fulfilled: Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert
On Wed, May 15, 2019 at 10:32:18AM +0200, Geert Uytterhoeven wrote: > Hi Marek, > > On Wed, May 15, 2019 at 10:23 AM <marek.vasut@gmail.com> wrote: > > From: Marek Vasut <marek.vasut+renesas@gmail.com> > > > > The PMIC IRQ line pin multiplexing configuration is missing from the DTs. > > Since the line is configured correctly by default, the system works fine. > > However, add the IRQ line pin multiplexing configuration for completeness. > > > > Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> > > Cc: Geert Uytterhoeven <geert+renesas@glider.be> > > Cc: Simon Horman <horms+renesas@verge.net.au> > > Cc: linux-renesas-soc@vger.kernel.org > > To: linux-arm-kernel@lists.infradead.org > > --- > > V2: Move the pin control node from iic3 controller to pmic on 7792 Blanche, > > since there's only one PMIC on that board. > > Thanks for the update! > > As the tag condition from v1 is now fulfilled: > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Thanks, applied for v5.3.
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 7b9508e83d46..d637b9727808 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -423,6 +423,8 @@ */ i2cpwr: i2c-13 { compatible = "i2c-demux-pinctrl"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; i2c-parent = <&iic3>, <&i2c3>; i2c-bus-name = "i2c-pwr"; #address-cells = <1>; @@ -615,6 +617,11 @@ function = "iic3"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + hsusb_pins: hsusb { groups = "usb0_ovc_vbus"; function = "usb0"; diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts index 7a7d3b84d1a6..ad68e6034b43 100644 --- a/arch/arm/boot/dts/r8a7790-stout.dts +++ b/arch/arm/boot/dts/r8a7790-stout.dts @@ -179,6 +179,11 @@ function = "iic3"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0"; @@ -317,7 +322,7 @@ &iic3 { pinctrl-names = "default"; - pinctrl-0 = <&iic3_pins>; + pinctrl-0 = <&iic3_pins &pmic_irq_pins>; status = "okay"; pmic@58 { diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index e6580aa0cea3..a116bfc11f0b 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -540,6 +540,11 @@ function = "intc"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -776,6 +781,8 @@ }; &i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; status = "okay"; clock-frequency = <100000>; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index fefdf8238bbe..e08d257f5d0c 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -228,6 +228,11 @@ function = "intc"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -373,6 +378,8 @@ }; &i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; status = "okay"; clock-frequency = <100000>; diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index b6fa80c3b07e..b7af14de7c8e 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -234,6 +234,11 @@ groups = "du1_rgb666", "du1_sync", "du1_disp"; function = "du1"; }; + + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; }; &rwdt { @@ -314,6 +319,8 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; interrupt-parent = <&irqc>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index f51601af89a2..9984ebf06695 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -514,6 +514,11 @@ function = "intc"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -711,6 +716,8 @@ }; &i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; status = "okay"; clock-frequency = <100000>;