| Message ID | 20190516090224.59070-4-bibby.hsieh@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | support gce on mt8183 platform | expand |
Hi, Bibby: On Thu, 2019-05-16 at 17:02 +0800, Bibby Hsieh wrote: > tcmdq driver provide a function that get the relationship What is 'tcmdq'? > of sub system number from device node for client. > add specification for #subsys-cells, mediatek,gce-subsys. The property name is mediatek,gce-client-reg. Regards, CK > > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> > --- > .../devicetree/bindings/mailbox/mtk-gce.txt | 15 ++++++++++++--- > 1 file changed, 12 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > index 1f7f8f2a3f49..dceab63ccd06 100644 > --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > @@ -21,11 +21,19 @@ Required properties: > priority: Priority of GCE thread. > atomic_exec: GCE processing continuous packets of commands in atomic > way. > +- #subsys-cells: Should be 3. > + <&phandle subsys_number start_offset size> > + phandle: Label name of a gce node. > + subsys_number: specify the sub-system id which is corresponding > + to the register address. > + start_offset: the start offset of register address that GCE can access. > + size: the total size of register address that GCE can access. > > Required properties for a client device: > - mboxes: Client use mailbox to communicate with GCE, it should have this > property and list of phandle, mailbox specifiers. > -- mediatek,gce-subsys: u32, specify the sub-system id which is corresponding > +Optional properties for a client device: > +- mediatek,gce-client-reg: u32, specify the sub-system id which is corresponding > to the register address. > > Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h' > @@ -40,6 +48,7 @@ Example: > clocks = <&infracfg CLK_INFRA_GCE>; > clock-names = "gce"; > #mbox-cells = <3>; > + #subsys-cells = <3>; > }; > > Example for a client device: > @@ -48,9 +57,9 @@ Example for a client device: > compatible = "mediatek,mt8173-mmsys"; > mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>, > <&gce 1 CMDQ_THR_PRIO_LOWEST 1>; > - mediatek,gce-subsys = <SUBSYS_1400XXXX>; > mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF > CMDQ_EVENT_MUTEX1_STREAM_EOF>; > - > + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>, > + <&gce SUBSYS_1401XXXX 0x2000 0x100>; > ... > };
diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt index 1f7f8f2a3f49..dceab63ccd06 100644 --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt @@ -21,11 +21,19 @@ Required properties: priority: Priority of GCE thread. atomic_exec: GCE processing continuous packets of commands in atomic way. +- #subsys-cells: Should be 3. + <&phandle subsys_number start_offset size> + phandle: Label name of a gce node. + subsys_number: specify the sub-system id which is corresponding + to the register address. + start_offset: the start offset of register address that GCE can access. + size: the total size of register address that GCE can access. Required properties for a client device: - mboxes: Client use mailbox to communicate with GCE, it should have this property and list of phandle, mailbox specifiers. -- mediatek,gce-subsys: u32, specify the sub-system id which is corresponding +Optional properties for a client device: +- mediatek,gce-client-reg: u32, specify the sub-system id which is corresponding to the register address. Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h' @@ -40,6 +48,7 @@ Example: clocks = <&infracfg CLK_INFRA_GCE>; clock-names = "gce"; #mbox-cells = <3>; + #subsys-cells = <3>; }; Example for a client device: @@ -48,9 +57,9 @@ Example for a client device: compatible = "mediatek,mt8173-mmsys"; mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>, <&gce 1 CMDQ_THR_PRIO_LOWEST 1>; - mediatek,gce-subsys = <SUBSYS_1400XXXX>; mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF CMDQ_EVENT_MUTEX1_STREAM_EOF>; - + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>, + <&gce SUBSYS_1401XXXX 0x2000 0x100>; ... };
tcmdq driver provide a function that get the relationship of sub system number from device node for client. add specification for #subsys-cells, mediatek,gce-subsys. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> --- .../devicetree/bindings/mailbox/mtk-gce.txt | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)