diff mbox series

tests/generic/54{0..3}: redirect FILEFRAG error output to .full too

Message ID 20190520062818.12421-1-xzhou@redhat.com (mailing list archive)
State New, archived
Headers show
Series tests/generic/54{0..3}: redirect FILEFRAG error output to .full too | expand

Commit Message

Murphy Zhou May 20, 2019, 6:28 a.m. UTC 
NFSv4.2 supports reflink but does not support FIBMAP. These 4 tests
about file content can pass on NFSv4.2, but FILEFRAG complaint :
+/mnt/testarea/scratch/test-542/file2: FIBMAP unsupported
is breaking golden output.

Signed-off-by: Murphy Zhou <xzhou@redhat.com>
---
 tests/generic/540 | 8 ++++----
 tests/generic/541 | 8 ++++----
 tests/generic/542 | 8 ++++----
 tests/generic/543 | 8 ++++----
 4 files changed, 16 insertions(+), 16 deletions(-)

Comments

Chuck Lever May 20, 2019, 2:21 p.m. UTC | #1 
> On May 20, 2019, at 2:28 AM, Murphy Zhou <xzhou@redhat.com> wrote:
> 
> NFSv4.2 supports reflink but does not support FIBMAP. These 4 tests
> about file content can pass on NFSv4.2, but FILEFRAG complaint :
> +/mnt/testarea/scratch/test-542/file2: FIBMAP unsupported
> is breaking golden output.
> 
> Signed-off-by: Murphy Zhou <xzhou@redhat.com>
> ---
> tests/generic/540 | 8 ++++----
> tests/generic/541 | 8 ++++----
> tests/generic/542 | 8 ++++----
> tests/generic/543 | 8 ++++----
> 4 files changed, 16 insertions(+), 16 deletions(-)
> 
> diff --git a/tests/generic/540 b/tests/generic/540
> index 65a71f22..dc4d9485 100755
> --- a/tests/generic/540
> +++ b/tests/generic/540
> @@ -72,16 +72,16 @@ _weave_reflink_rainbow_delalloc $blksz $nr $testdir/file3 >> $seqres.full
> 
> # now reflink into the rainbow
> echo "before reflink" >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
> +$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
> +$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
> $XFS_IO_PROG -f -c "reflink $testdir/file2 $roff $roff $rsz" $testdir/file3 >> $seqres.full
> _pwrite_byte 0x64 $roff $rsz $testdir/file3.chk >> $seqres.full
> _scratch_cycle_mount
> 
> echo "Compare files"
> echo "after reflink" >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
> +$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
> +$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
> md5sum $testdir/file1 | _filter_scratch
> md5sum $testdir/file2 | _filter_scratch
> md5sum $testdir/file3 | _filter_scratch
> diff --git a/tests/generic/541 b/tests/generic/541
> index e7e19be4..fcb5d567 100755
> --- a/tests/generic/541
> +++ b/tests/generic/541
> @@ -74,8 +74,8 @@ _weave_reflink_rainbow_delalloc $blksz $nr $testdir/file3 >> $seqres.full
> 
> # now reflink the rainbow
> echo "before reflink" >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
> +$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
> +$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
> $XFS_IO_PROG -f -c "reflink $testdir/file3 $roff $roff $rsz" $testdir/file2 >> $seqres.full
> cp $testdir/file3.chk $testdir/file2.chk
> _pwrite_byte 0x64 0 $roff $testdir/file2.chk >> $seqres.full
> @@ -84,8 +84,8 @@ _scratch_cycle_mount
> 
> echo "Compare files"
> echo "after reflink" >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
> +$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
> +$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
> md5sum $testdir/file1 | _filter_scratch
> md5sum $testdir/file2 | _filter_scratch
> md5sum $testdir/file2.chk | _filter_scratch
> diff --git a/tests/generic/542 b/tests/generic/542
> index c416ab69..62b32cb5 100755
> --- a/tests/generic/542
> +++ b/tests/generic/542
> @@ -73,16 +73,16 @@ _weave_reflink_rainbow_delalloc $blksz $nr $testdir/file3 >> $seqres.full
> 
> # now reflink into the rainbow
> echo "before reflink" >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
> +$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
> +$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
> $XFS_IO_PROG -f -c "reflink $testdir/file2 $soff $doff $rsz" $testdir/file3 >> $seqres.full
> _pwrite_byte 0x64 $doff $rsz $testdir/file3.chk >> $seqres.full
> _scratch_cycle_mount
> 
> echo "Compare files"
> echo "after reflink" >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
> +$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
> +$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
> md5sum $testdir/file1 | _filter_scratch
> md5sum $testdir/file2 | _filter_scratch
> md5sum $testdir/file3 | _filter_scratch
> diff --git a/tests/generic/543 b/tests/generic/543
> index 50a51f89..cc7ee532 100755
> --- a/tests/generic/543
> +++ b/tests/generic/543
> @@ -75,8 +75,8 @@ _weave_reflink_rainbow_delalloc $blksz $nr $testdir/file3 >> $seqres.full
> 
> # now reflink the rainbow
> echo "before reflink" >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
> +$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
> +$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
> $XFS_IO_PROG -f -c "reflink $testdir/file3 $soff $doff $rsz" $testdir/file2 >> $seqres.full
> $XFS_IO_PROG -c "truncate $doff" $testdir/file2.chk
> dd if=$testdir/file3.chk skip=$((soff / blksz)) count=$((rsz / blksz)) bs=$blksz >> $testdir/file2.chk 2> /dev/null
> @@ -84,8 +84,8 @@ _scratch_cycle_mount
> 
> echo "Compare files"
> echo "after reflink" >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
> +$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
> +$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
> md5sum $testdir/file1 | _filter_scratch
> md5sum $testdir/file2 | _filter_scratch
> md5sum $testdir/file2.chk | _filter_scratch
> -- 
> 2.21.0
> 

Hi -

No comment on the content of this patch, but please do cross-post NFS-related
fstests fixes to linux-nfs@vger.kernel.org. Thank you!

--
Chuck Lever
Darrick J. Wong May 20, 2019, 2:32 p.m. UTC | #2 
On Mon, May 20, 2019 at 02:28:18PM +0800, Murphy Zhou wrote:
> NFSv4.2 supports reflink but does not support FIBMAP. These 4 tests
> about file content can pass on NFSv4.2, but FILEFRAG complaint :
> +/mnt/testarea/scratch/test-542/file2: FIBMAP unsupported
> is breaking golden output.
> 
> Signed-off-by: Murphy Zhou <xzhou@redhat.com>

Looks ok to me,
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>

--D

> ---
>  tests/generic/540 | 8 ++++----
>  tests/generic/541 | 8 ++++----
>  tests/generic/542 | 8 ++++----
>  tests/generic/543 | 8 ++++----
>  4 files changed, 16 insertions(+), 16 deletions(-)
> 
> diff --git a/tests/generic/540 b/tests/generic/540
> index 65a71f22..dc4d9485 100755
> --- a/tests/generic/540
> +++ b/tests/generic/540
> @@ -72,16 +72,16 @@ _weave_reflink_rainbow_delalloc $blksz $nr $testdir/file3 >> $seqres.full
>  
>  # now reflink into the rainbow
>  echo "before reflink" >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
> +$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
> +$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
>  $XFS_IO_PROG -f -c "reflink $testdir/file2 $roff $roff $rsz" $testdir/file3 >> $seqres.full
>  _pwrite_byte 0x64 $roff $rsz $testdir/file3.chk >> $seqres.full
>  _scratch_cycle_mount
>  
>  echo "Compare files"
>  echo "after reflink" >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
> +$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
> +$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
>  md5sum $testdir/file1 | _filter_scratch
>  md5sum $testdir/file2 | _filter_scratch
>  md5sum $testdir/file3 | _filter_scratch
> diff --git a/tests/generic/541 b/tests/generic/541
> index e7e19be4..fcb5d567 100755
> --- a/tests/generic/541
> +++ b/tests/generic/541
> @@ -74,8 +74,8 @@ _weave_reflink_rainbow_delalloc $blksz $nr $testdir/file3 >> $seqres.full
>  
>  # now reflink the rainbow
>  echo "before reflink" >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
> +$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
> +$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
>  $XFS_IO_PROG -f -c "reflink $testdir/file3 $roff $roff $rsz" $testdir/file2 >> $seqres.full
>  cp $testdir/file3.chk $testdir/file2.chk
>  _pwrite_byte 0x64 0 $roff $testdir/file2.chk >> $seqres.full
> @@ -84,8 +84,8 @@ _scratch_cycle_mount
>  
>  echo "Compare files"
>  echo "after reflink" >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
> +$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
> +$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
>  md5sum $testdir/file1 | _filter_scratch
>  md5sum $testdir/file2 | _filter_scratch
>  md5sum $testdir/file2.chk | _filter_scratch
> diff --git a/tests/generic/542 b/tests/generic/542
> index c416ab69..62b32cb5 100755
> --- a/tests/generic/542
> +++ b/tests/generic/542
> @@ -73,16 +73,16 @@ _weave_reflink_rainbow_delalloc $blksz $nr $testdir/file3 >> $seqres.full
>  
>  # now reflink into the rainbow
>  echo "before reflink" >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
> +$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
> +$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
>  $XFS_IO_PROG -f -c "reflink $testdir/file2 $soff $doff $rsz" $testdir/file3 >> $seqres.full
>  _pwrite_byte 0x64 $doff $rsz $testdir/file3.chk >> $seqres.full
>  _scratch_cycle_mount
>  
>  echo "Compare files"
>  echo "after reflink" >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
> +$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
> +$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
>  md5sum $testdir/file1 | _filter_scratch
>  md5sum $testdir/file2 | _filter_scratch
>  md5sum $testdir/file3 | _filter_scratch
> diff --git a/tests/generic/543 b/tests/generic/543
> index 50a51f89..cc7ee532 100755
> --- a/tests/generic/543
> +++ b/tests/generic/543
> @@ -75,8 +75,8 @@ _weave_reflink_rainbow_delalloc $blksz $nr $testdir/file3 >> $seqres.full
>  
>  # now reflink the rainbow
>  echo "before reflink" >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
> +$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
> +$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
>  $XFS_IO_PROG -f -c "reflink $testdir/file3 $soff $doff $rsz" $testdir/file2 >> $seqres.full
>  $XFS_IO_PROG -c "truncate $doff" $testdir/file2.chk
>  dd if=$testdir/file3.chk skip=$((soff / blksz)) count=$((rsz / blksz)) bs=$blksz >> $testdir/file2.chk 2> /dev/null
> @@ -84,8 +84,8 @@ _scratch_cycle_mount
>  
>  echo "Compare files"
>  echo "after reflink" >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
> -$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
> +$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
> +$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
>  md5sum $testdir/file1 | _filter_scratch
>  md5sum $testdir/file2 | _filter_scratch
>  md5sum $testdir/file2.chk | _filter_scratch
> -- 
> 2.21.0
>
diff mbox series

Patch

diff --git a/tests/generic/540 b/tests/generic/540
index 65a71f22..dc4d9485 100755
--- a/tests/generic/540
+++ b/tests/generic/540
@@ -72,16 +72,16 @@  _weave_reflink_rainbow_delalloc $blksz $nr $testdir/file3 >> $seqres.full
 
 # now reflink into the rainbow
 echo "before reflink" >> $seqres.full
-$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
-$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
+$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
+$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
 $XFS_IO_PROG -f -c "reflink $testdir/file2 $roff $roff $rsz" $testdir/file3 >> $seqres.full
 _pwrite_byte 0x64 $roff $rsz $testdir/file3.chk >> $seqres.full
 _scratch_cycle_mount
 
 echo "Compare files"
 echo "after reflink" >> $seqres.full
-$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
-$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
+$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
+$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
 md5sum $testdir/file1 | _filter_scratch
 md5sum $testdir/file2 | _filter_scratch
 md5sum $testdir/file3 | _filter_scratch
diff --git a/tests/generic/541 b/tests/generic/541
index e7e19be4..fcb5d567 100755
--- a/tests/generic/541
+++ b/tests/generic/541
@@ -74,8 +74,8 @@  _weave_reflink_rainbow_delalloc $blksz $nr $testdir/file3 >> $seqres.full
 
 # now reflink the rainbow
 echo "before reflink" >> $seqres.full
-$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
-$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
+$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
+$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
 $XFS_IO_PROG -f -c "reflink $testdir/file3 $roff $roff $rsz" $testdir/file2 >> $seqres.full
 cp $testdir/file3.chk $testdir/file2.chk
 _pwrite_byte 0x64 0 $roff $testdir/file2.chk >> $seqres.full
@@ -84,8 +84,8 @@  _scratch_cycle_mount
 
 echo "Compare files"
 echo "after reflink" >> $seqres.full
-$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
-$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
+$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
+$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
 md5sum $testdir/file1 | _filter_scratch
 md5sum $testdir/file2 | _filter_scratch
 md5sum $testdir/file2.chk | _filter_scratch
diff --git a/tests/generic/542 b/tests/generic/542
index c416ab69..62b32cb5 100755
--- a/tests/generic/542
+++ b/tests/generic/542
@@ -73,16 +73,16 @@  _weave_reflink_rainbow_delalloc $blksz $nr $testdir/file3 >> $seqres.full
 
 # now reflink into the rainbow
 echo "before reflink" >> $seqres.full
-$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
-$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
+$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
+$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
 $XFS_IO_PROG -f -c "reflink $testdir/file2 $soff $doff $rsz" $testdir/file3 >> $seqres.full
 _pwrite_byte 0x64 $doff $rsz $testdir/file3.chk >> $seqres.full
 _scratch_cycle_mount
 
 echo "Compare files"
 echo "after reflink" >> $seqres.full
-$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
-$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
+$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
+$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
 md5sum $testdir/file1 | _filter_scratch
 md5sum $testdir/file2 | _filter_scratch
 md5sum $testdir/file3 | _filter_scratch
diff --git a/tests/generic/543 b/tests/generic/543
index 50a51f89..cc7ee532 100755
--- a/tests/generic/543
+++ b/tests/generic/543
@@ -75,8 +75,8 @@  _weave_reflink_rainbow_delalloc $blksz $nr $testdir/file3 >> $seqres.full
 
 # now reflink the rainbow
 echo "before reflink" >> $seqres.full
-$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
-$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
+$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
+$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
 $XFS_IO_PROG -f -c "reflink $testdir/file3 $soff $doff $rsz" $testdir/file2 >> $seqres.full
 $XFS_IO_PROG -c "truncate $doff" $testdir/file2.chk
 dd if=$testdir/file3.chk skip=$((soff / blksz)) count=$((rsz / blksz)) bs=$blksz >> $testdir/file2.chk 2> /dev/null
@@ -84,8 +84,8 @@  _scratch_cycle_mount
 
 echo "Compare files"
 echo "after reflink" >> $seqres.full
-$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full
-$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full
+$FILEFRAG_PROG -v $testdir/file2 >> $seqres.full 2>&1
+$FILEFRAG_PROG -v $testdir/file3 >> $seqres.full 2>&1
 md5sum $testdir/file1 | _filter_scratch
 md5sum $testdir/file2 | _filter_scratch
 md5sum $testdir/file2.chk | _filter_scratch