diff mbox series

[V3,6/8] arm64: tegra: Enable xudc on Jetson TX1

Message ID 1557988772-15406-7-git-send-email-nkristam@nvidia.com (mailing list archive)
State Superseded
Headers show
Series Tegra XUSB gadget driver support | expand

Commit Message

Nagarjuna Kristam May 16, 2019, 6:39 a.m. UTC 
Enable XUSB device mode driver for USB0 slot on Jetson TX1.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

JC Kuo May 21, 2019, 6:11 a.m. UTC | #1 
Reviewed-by: JC Kuo <jckuo@nvidia.com>

Thanks,

JC

On 5/16/19 2:39 PM, Nagarjuna Kristam wrote:
> Enable XUSB device mode driver for USB0 slot on Jetson TX1.
>
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> ---
>   arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 14 ++++++++++++++
>   1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> index a7dc319..e0e67cd 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> @@ -1483,6 +1483,20 @@
>   		vmmc-supply = <&vdd_3v3_sd>;
>   	};
>   
> +	xudc@700d0000 {
> +		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>;
> +		phy-names = "usb2";
> +		avddio-usb-supply = <&vdd_3v3_sys>;
> +		hvdd-usb-supply = <&vdd_1v8>;
> +		extcon = <&extcon_usb>;
> +		status = "okay";
> +	};
> +
> +	extcon_usb: extcon_vbus {
> +		compatible = "linux,extcon-usb-gpio";
> +		vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
> +	};
> +
>   	regulators {
>   		compatible = "simple-bus";
>   		#address-cells = <1>;
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index a7dc319..e0e67cd 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1483,6 +1483,20 @@ 
 		vmmc-supply = <&vdd_3v3_sd>;
 	};
 
+	xudc@700d0000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>;
+		phy-names = "usb2";
+		avddio-usb-supply = <&vdd_3v3_sys>;
+		hvdd-usb-supply = <&vdd_1v8>;
+		extcon = <&extcon_usb>;
+		status = "okay";
+	};
+
+	extcon_usb: extcon_vbus {
+		compatible = "linux,extcon-usb-gpio";
+		vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;