| Message ID | 20190514073529.29505-7-peter.chen@nxp.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add imx7ulp USBOTG1 support | expand |
On Tue, May 14, 2019 at 07:38:21AM +0000, Peter Chen wrote: > Add imx7ulp USBOTG1 support. > > Signed-off-by: Peter Chen <peter.chen@nxp.com> > --- > arch/arm/boot/dts/imx7ulp.dtsi | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi > index fca6e50f37c8..60c9ea116d0a 100644 > --- a/arch/arm/boot/dts/imx7ulp.dtsi > +++ b/arch/arm/boot/dts/imx7ulp.dtsi > @@ -30,6 +30,7 @@ > serial1 = &lpuart5; > serial2 = &lpuart6; > serial3 = &lpuart7; > + usbphy0 = &usbphy1; > }; > > cpus { > @@ -133,6 +134,36 @@ > clock-names = "ipg", "per"; > }; > > + usbotg1: usb@40330000 { > + compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", > + "fsl,imx27-usb"; > + reg = <0x40330000 0x200>; > + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc2 IMX7ULP_CLK_USB0>; > + phys = <&usbphy1>; > + fsl,usbmisc = <&usbmisc1 0>; > + ahb-burst-config = <0x0>; > + tx-burst-size-dword = <0x8>; > + rx-burst-size-dword = <0x8>; > + status = "disabled"; > + }; > + > + usbmisc1: usbmisc@40330200 { > + #index-cells = <1>; Nit: we usually start with 'compatible', so can we move it behind? Shawn > + compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", > + "fsl,imx6q-usbmisc"; > + reg = <0x40330200 0x200>; > + }; > + > + usbphy1: usbphy@0x40350000 { > + compatible = "fsl,imx7ulp-usbphy", > + "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; > + reg = <0x40350000 0x1000>; > + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; > + #phy-cells = <0>; > + }; > + > usdhc0: mmc@40370000 { > compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; > reg = <0x40370000 0x10000>; > -- > 2.14.1 >
> > 1 file changed, 31 insertions(+) > > > > diff --git a/arch/arm/boot/dts/imx7ulp.dtsi > > b/arch/arm/boot/dts/imx7ulp.dtsi index fca6e50f37c8..60c9ea116d0a > > 100644 > > --- a/arch/arm/boot/dts/imx7ulp.dtsi > > +++ b/arch/arm/boot/dts/imx7ulp.dtsi > > @@ -30,6 +30,7 @@ > > serial1 = &lpuart5; > > serial2 = &lpuart6; > > serial3 = &lpuart7; > > + usbphy0 = &usbphy1; > > }; > > > > cpus { > > @@ -133,6 +134,36 @@ > > clock-names = "ipg", "per"; > > }; > > > > + usbotg1: usb@40330000 { > > + compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", > > + "fsl,imx27-usb"; > > + reg = <0x40330000 0x200>; > > + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&pcc2 IMX7ULP_CLK_USB0>; > > + phys = <&usbphy1>; > > + fsl,usbmisc = <&usbmisc1 0>; > > + ahb-burst-config = <0x0>; > > + tx-burst-size-dword = <0x8>; > > + rx-burst-size-dword = <0x8>; > > + status = "disabled"; > > + }; > > + > > + usbmisc1: usbmisc@40330200 { > > + #index-cells = <1>; > > Nit: we usually start with 'compatible', so can we move it behind? > Thanks, will change. Peter > Shawn > > > + compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", > > + "fsl,imx6q-usbmisc"; > > + reg = <0x40330200 0x200>; > > + }; > > + > > + usbphy1: usbphy@0x40350000 { > > + compatible = "fsl,imx7ulp-usbphy", > > + "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; > > + reg = <0x40350000 0x1000>; > > + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; > > + #phy-cells = <0>; > > + }; > > + > > usdhc0: mmc@40370000 { > > compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; > > reg = <0x40370000 0x10000>; > > -- > > 2.14.1 > >
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index fca6e50f37c8..60c9ea116d0a 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -30,6 +30,7 @@ serial1 = &lpuart5; serial2 = &lpuart6; serial3 = &lpuart7; + usbphy0 = &usbphy1; }; cpus { @@ -133,6 +134,36 @@ clock-names = "ipg", "per"; }; + usbotg1: usb@40330000 { + compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", + "fsl,imx27-usb"; + reg = <0x40330000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_USB0>; + phys = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x8>; + rx-burst-size-dword = <0x8>; + status = "disabled"; + }; + + usbmisc1: usbmisc@40330200 { + #index-cells = <1>; + compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", + "fsl,imx6q-usbmisc"; + reg = <0x40330200 0x200>; + }; + + usbphy1: usbphy@0x40350000 { + compatible = "fsl,imx7ulp-usbphy", + "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; + reg = <0x40350000 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; + #phy-cells = <0>; + }; + usdhc0: mmc@40370000 { compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; reg = <0x40370000 0x10000>;
Add imx7ulp USBOTG1 support. Signed-off-by: Peter Chen <peter.chen@nxp.com> --- arch/arm/boot/dts/imx7ulp.dtsi | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)