| Message ID | 1557988772-15406-6-git-send-email-nkristam@nvidia.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Tegra XUSB gadget driver support | expand |
Reviewed-by: JC Kuo <jckuo@nvidia.com> Thanks, JC On 5/16/19 2:39 PM, Nagarjuna Kristam wrote: > Tegra210 has one XUSB device mode controller, which can be operated > HS and SS modes. Add DT support for XUSB device mode controller. > > Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> > --- > arch/arm64/boot/dts/nvidia/tegra210.dtsi | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi > index a550c0a..edef00b 100644 > --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi > +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi > @@ -1184,6 +1184,25 @@ > status = "disabled"; > }; > > + xudc@700d0000 { > + compatible = "nvidia,tegra210-xudc"; > + reg = <0x0 0x700d0000 0x0 0x8000>, > + <0x0 0x700d8000 0x0 0x1000>, > + <0x0 0x700d9000 0x0 0x1000>; > + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>, > + <&tegra_car TEGRA210_CLK_XUSB_SS>, > + <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>, > + <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>, > + <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>; > + clock-names = "dev", "ss", "ss_src", > + "hs_src", "fs_src"; > + power-domains = <&pd_xusbdev>, <&pd_xusbss>; > + power-domain-names = "dev", "ss"; > + nvidia,xusb-padctl = <&padctl>; > + status = "disabled"; > + }; > + > mipi: mipi@700e3000 { > compatible = "nvidia,tegra210-mipi"; > reg = <0x0 0x700e3000 0x0 0x100>;
On Thu, May 16, 2019 at 12:09:29PM +0530, Nagarjuna Kristam wrote: > Tegra210 has one XUSB device mode controller, which can be operated > HS and SS modes. Add DT support for XUSB device mode controller. > > Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> > --- > arch/arm64/boot/dts/nvidia/tegra210.dtsi | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi > index a550c0a..edef00b 100644 > --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi > +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi > @@ -1184,6 +1184,25 @@ > status = "disabled"; > }; > > + xudc@700d0000 { > + compatible = "nvidia,tegra210-xudc"; > + reg = <0x0 0x700d0000 0x0 0x8000>, > + <0x0 0x700d8000 0x0 0x1000>, > + <0x0 0x700d9000 0x0 0x1000>; Same comments regarding alignment as for the bindings patch. > + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>, > + <&tegra_car TEGRA210_CLK_XUSB_SS>, > + <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>, > + <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>, > + <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>; Same here. > + clock-names = "dev", "ss", "ss_src", > + "hs_src", "fs_src"; No need to split this across multiple lines, it all fits within 72/80 characters. Thierry > + power-domains = <&pd_xusbdev>, <&pd_xusbss>; > + power-domain-names = "dev", "ss"; > + nvidia,xusb-padctl = <&padctl>; > + status = "disabled"; > + }; > + > mipi: mipi@700e3000 { > compatible = "nvidia,tegra210-mipi"; > reg = <0x0 0x700e3000 0x0 0x100>; > -- > 2.7.4 >
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index a550c0a..edef00b 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -1184,6 +1184,25 @@ status = "disabled"; }; + xudc@700d0000 { + compatible = "nvidia,tegra210-xudc"; + reg = <0x0 0x700d0000 0x0 0x8000>, + <0x0 0x700d8000 0x0 0x1000>, + <0x0 0x700d9000 0x0 0x1000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>, + <&tegra_car TEGRA210_CLK_XUSB_SS>, + <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>; + clock-names = "dev", "ss", "ss_src", + "hs_src", "fs_src"; + power-domains = <&pd_xusbdev>, <&pd_xusbss>; + power-domain-names = "dev", "ss"; + nvidia,xusb-padctl = <&padctl>; + status = "disabled"; + }; + mipi: mipi@700e3000 { compatible = "nvidia,tegra210-mipi"; reg = <0x0 0x700e3000 0x0 0x100>;
Tegra210 has one XUSB device mode controller, which can be operated HS and SS modes. Add DT support for XUSB device mode controller. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> --- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)