| Message ID | 20190522155259.11174-1-christian@brauner.io (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [v1,1/2] open: add close_range() | expand |
On 05/22, Christian Brauner wrote: > > +static struct file *pick_file(struct files_struct *files, unsigned fd) > { > - struct file *file; > + struct file *file = NULL; > struct fdtable *fdt; > > spin_lock(&files->file_lock); > @@ -632,15 +629,65 @@ int __close_fd(struct files_struct *files, unsigned fd) > goto out_unlock; > rcu_assign_pointer(fdt->fd[fd], NULL); > __put_unused_fd(files, fd); > - spin_unlock(&files->file_lock); > - return filp_close(file, files); > > out_unlock: > spin_unlock(&files->file_lock); > - return -EBADF; > + return file; ... > +int __close_range(struct files_struct *files, unsigned fd, unsigned max_fd) > +{ > + unsigned int cur_max; > + > + if (fd > max_fd) > + return -EINVAL; > + > + rcu_read_lock(); > + cur_max = files_fdtable(files)->max_fds; > + rcu_read_unlock(); > + > + /* cap to last valid index into fdtable */ > + if (max_fd >= cur_max) > + max_fd = cur_max - 1; > + > + while (fd <= max_fd) { > + struct file *file; > + > + file = pick_file(files, fd++); Well, how about something like static unsigned int find_next_opened_fd(struct fdtable *fdt, unsigned start) { unsigned int maxfd = fdt->max_fds; unsigned int maxbit = maxfd / BITS_PER_LONG; unsigned int bitbit = start / BITS_PER_LONG; bitbit = find_next_bit(fdt->full_fds_bits, maxbit, bitbit) * BITS_PER_LONG; if (bitbit > maxfd) return maxfd; if (bitbit > start) start = bitbit; return find_next_bit(fdt->open_fds, maxfd, start); } unsigned close_next_fd(struct files_struct *files, unsigned start, unsigned maxfd) { unsigned fd; struct file *file; struct fdtable *fdt; spin_lock(&files->file_lock); fdt = files_fdtable(files); fd = find_next_opened_fd(fdt, start); if (fd >= fdt->max_fds || fd > maxfd) { fd = -1; goto out; } file = fdt->fd[fd]; rcu_assign_pointer(fdt->fd[fd], NULL); __put_unused_fd(files, fd); out: spin_unlock(&files->file_lock); if (fd == -1u) return fd; filp_close(file, files); return fd + 1; } ? Then close_range() can do while (fd < max_fd) fd = close_next_fd(fd, maxfd); Oleg.
On Wed, May 22, 2019 at 06:57:37PM +0200, Oleg Nesterov wrote: > On 05/22, Christian Brauner wrote: > > > > +static struct file *pick_file(struct files_struct *files, unsigned fd) > > { > > - struct file *file; > > + struct file *file = NULL; > > struct fdtable *fdt; > > > > spin_lock(&files->file_lock); > > @@ -632,15 +629,65 @@ int __close_fd(struct files_struct *files, unsigned fd) > > goto out_unlock; > > rcu_assign_pointer(fdt->fd[fd], NULL); > > __put_unused_fd(files, fd); > > - spin_unlock(&files->file_lock); > > - return filp_close(file, files); > > > > out_unlock: > > spin_unlock(&files->file_lock); > > - return -EBADF; > > + return file; > > ... > > > +int __close_range(struct files_struct *files, unsigned fd, unsigned max_fd) > > +{ > > + unsigned int cur_max; > > + > > + if (fd > max_fd) > > + return -EINVAL; > > + > > + rcu_read_lock(); > > + cur_max = files_fdtable(files)->max_fds; > > + rcu_read_unlock(); > > + > > + /* cap to last valid index into fdtable */ > > + if (max_fd >= cur_max) > > + max_fd = cur_max - 1; > > + > > + while (fd <= max_fd) { > > + struct file *file; > > + > > + file = pick_file(files, fd++); > > Well, how about something like > > static unsigned int find_next_opened_fd(struct fdtable *fdt, unsigned start) > { > unsigned int maxfd = fdt->max_fds; > unsigned int maxbit = maxfd / BITS_PER_LONG; > unsigned int bitbit = start / BITS_PER_LONG; > > bitbit = find_next_bit(fdt->full_fds_bits, maxbit, bitbit) * BITS_PER_LONG; > if (bitbit > maxfd) > return maxfd; > if (bitbit > start) > start = bitbit; > return find_next_bit(fdt->open_fds, maxfd, start); > } > > unsigned close_next_fd(struct files_struct *files, unsigned start, unsigned maxfd) > { > unsigned fd; > struct file *file; > struct fdtable *fdt; > > spin_lock(&files->file_lock); > fdt = files_fdtable(files); > fd = find_next_opened_fd(fdt, start); > if (fd >= fdt->max_fds || fd > maxfd) { > fd = -1; > goto out; > } > > file = fdt->fd[fd]; > rcu_assign_pointer(fdt->fd[fd], NULL); > __put_unused_fd(files, fd); > out: > spin_unlock(&files->file_lock); > > if (fd == -1u) > return fd; > > filp_close(file, files); > return fd + 1; > } Thanks, Oleg! I kept it dumb and was about to reply that your solution introduces more code when it seemed we wanted to keep this very simple for now. But then I saw that find_next_opened_fd() already exists as find_next_fd(). So it's actually not bad compared to what I sent in v1. So - with some small tweaks (need to test it and all now) - how do we feel about?: /** * __close_next_open_fd() - Close the nearest open fd. * * @curfd: lowest file descriptor to consider * @maxfd: highest file descriptor to consider * * This function will close the nearest open fd, i.e. it will either * close @curfd if it is open or the closest open file descriptor * c greater than @curfd that * is smaller or equal to maxfd. * If the function found a file descriptor to close it will return 0 and * place the file descriptor it closed in @curfd. If it did not find a * file descriptor to close it will return -EBADF. */ static int __close_next_open_fd(struct files_struct *files, unsigned *curfd, unsigned maxfd) { struct file *file = NULL; unsigned fd; struct fdtable *fdt; spin_lock(&files->file_lock); fdt = files_fdtable(files); fd = find_next_fd(fdt, *curfd); if (fd >= fdt->max_fds || fd > maxfd) goto out_unlock; file = fdt->fd[fd]; rcu_assign_pointer(fdt->fd[fd], NULL); __put_unused_fd(files, fd); out_unlock: spin_unlock(&files->file_lock); if (!file) return -EBADF; *curfd = fd; filp_close(file, files); return 0; } int __close_range(struct files_struct *files, unsigned fd, unsigned max_fd) { if (fd > max_fd) return -EINVAL; while (fd <= max_fd) { if (__close_next_fd(files, &fd, maxfd)) break; cond_resched(); fd++; } return 0; } SYSCALL_DEFINE3(close_range, unsigned int, fd, unsigned int, max_fd, unsigned int, flags) { if (flags) return -EINVAL; return __close_range(current->files, fd, max_fd); }
On Thu, May 23, 2019 at 01:51:18PM +0200, Christian Brauner wrote: > On Wed, May 22, 2019 at 06:57:37PM +0200, Oleg Nesterov wrote: > > On 05/22, Christian Brauner wrote: > > > > > > +static struct file *pick_file(struct files_struct *files, unsigned fd) > > > { > > > - struct file *file; > > > + struct file *file = NULL; > > > struct fdtable *fdt; > > > > > > spin_lock(&files->file_lock); > > > @@ -632,15 +629,65 @@ int __close_fd(struct files_struct *files, unsigned fd) > > > goto out_unlock; > > > rcu_assign_pointer(fdt->fd[fd], NULL); > > > __put_unused_fd(files, fd); > > > - spin_unlock(&files->file_lock); > > > - return filp_close(file, files); > > > > > > out_unlock: > > > spin_unlock(&files->file_lock); > > > - return -EBADF; > > > + return file; > > > > ... > > > > > +int __close_range(struct files_struct *files, unsigned fd, unsigned max_fd) > > > +{ > > > + unsigned int cur_max; > > > + > > > + if (fd > max_fd) > > > + return -EINVAL; > > > + > > > + rcu_read_lock(); > > > + cur_max = files_fdtable(files)->max_fds; > > > + rcu_read_unlock(); > > > + > > > + /* cap to last valid index into fdtable */ > > > + if (max_fd >= cur_max) > > > + max_fd = cur_max - 1; > > > + > > > + while (fd <= max_fd) { > > > + struct file *file; > > > + > > > + file = pick_file(files, fd++); > > > > Well, how about something like > > > > static unsigned int find_next_opened_fd(struct fdtable *fdt, unsigned start) > > { > > unsigned int maxfd = fdt->max_fds; > > unsigned int maxbit = maxfd / BITS_PER_LONG; > > unsigned int bitbit = start / BITS_PER_LONG; > > > > bitbit = find_next_bit(fdt->full_fds_bits, maxbit, bitbit) * BITS_PER_LONG; > > if (bitbit > maxfd) > > return maxfd; > > if (bitbit > start) > > start = bitbit; > > return find_next_bit(fdt->open_fds, maxfd, start); > > } > > > > > unsigned close_next_fd(struct files_struct *files, unsigned start, unsigned maxfd) > > { > > unsigned fd; > > struct file *file; > > struct fdtable *fdt; > > > > spin_lock(&files->file_lock); > > fdt = files_fdtable(files); > > fd = find_next_opened_fd(fdt, start); > > if (fd >= fdt->max_fds || fd > maxfd) { > > fd = -1; > > goto out; > > } > > > > file = fdt->fd[fd]; > > rcu_assign_pointer(fdt->fd[fd], NULL); > > __put_unused_fd(files, fd); > > out: > > spin_unlock(&files->file_lock); > > > > if (fd == -1u) > > return fd; > > > > filp_close(file, files); > > return fd + 1; > > } > > Thanks, Oleg! > > I kept it dumb and was about to reply that your solution introduces more > code when it seemed we wanted to keep this very simple for now. > But then I saw that find_next_opened_fd() already exists as > find_next_fd(). So it's actually not bad compared to what I sent in v1. > So - with some small tweaks (need to test it and all now) - how do we > feel about?: That's obviously not correct atm but I'll send out a tweaked version in a bit. Christian
On Thu, May 23, 2019 at 04:14:47PM +0200, Christian Brauner wrote: > On Thu, May 23, 2019 at 01:51:18PM +0200, Christian Brauner wrote: > > On Wed, May 22, 2019 at 06:57:37PM +0200, Oleg Nesterov wrote: > > > On 05/22, Christian Brauner wrote: > > > > > > > > +static struct file *pick_file(struct files_struct *files, unsigned fd) > > > > { > > > > - struct file *file; > > > > + struct file *file = NULL; > > > > struct fdtable *fdt; > > > > > > > > spin_lock(&files->file_lock); > > > > @@ -632,15 +629,65 @@ int __close_fd(struct files_struct *files, unsigned fd) > > > > goto out_unlock; > > > > rcu_assign_pointer(fdt->fd[fd], NULL); > > > > __put_unused_fd(files, fd); > > > > - spin_unlock(&files->file_lock); > > > > - return filp_close(file, files); > > > > > > > > out_unlock: > > > > spin_unlock(&files->file_lock); > > > > - return -EBADF; > > > > + return file; > > > > > > ... > > > > > > > +int __close_range(struct files_struct *files, unsigned fd, unsigned max_fd) > > > > +{ > > > > + unsigned int cur_max; > > > > + > > > > + if (fd > max_fd) > > > > + return -EINVAL; > > > > + > > > > + rcu_read_lock(); > > > > + cur_max = files_fdtable(files)->max_fds; > > > > + rcu_read_unlock(); > > > > + > > > > + /* cap to last valid index into fdtable */ > > > > + if (max_fd >= cur_max) > > > > + max_fd = cur_max - 1; > > > > + > > > > + while (fd <= max_fd) { > > > > + struct file *file; > > > > + > > > > + file = pick_file(files, fd++); > > > > > > Well, how about something like > > > > > > static unsigned int find_next_opened_fd(struct fdtable *fdt, unsigned start) > > > { > > > unsigned int maxfd = fdt->max_fds; > > > unsigned int maxbit = maxfd / BITS_PER_LONG; > > > unsigned int bitbit = start / BITS_PER_LONG; > > > > > > bitbit = find_next_bit(fdt->full_fds_bits, maxbit, bitbit) * BITS_PER_LONG; > > > if (bitbit > maxfd) > > > return maxfd; > > > if (bitbit > start) > > > start = bitbit; > > > return find_next_bit(fdt->open_fds, maxfd, start); > > > } > > > > > > > > unsigned close_next_fd(struct files_struct *files, unsigned start, unsigned maxfd) > > > { > > > unsigned fd; > > > struct file *file; > > > struct fdtable *fdt; > > > > > > spin_lock(&files->file_lock); > > > fdt = files_fdtable(files); > > > fd = find_next_opened_fd(fdt, start); > > > if (fd >= fdt->max_fds || fd > maxfd) { > > > fd = -1; > > > goto out; > > > } > > > > > > file = fdt->fd[fd]; > > > rcu_assign_pointer(fdt->fd[fd], NULL); > > > __put_unused_fd(files, fd); > > > out: > > > spin_unlock(&files->file_lock); > > > > > > if (fd == -1u) > > > return fd; > > > > > > filp_close(file, files); > > > return fd + 1; > > > } > > > > Thanks, Oleg! > > > > I kept it dumb and was about to reply that your solution introduces more > > code when it seemed we wanted to keep this very simple for now. > > But then I saw that find_next_opened_fd() already exists as > > find_next_fd(). So it's actually not bad compared to what I sent in v1. > > So - with some small tweaks (need to test it and all now) - how do we > > feel about?: > > That's obviously not correct atm but I'll send out a tweaked version in > a bit. So given that we would really need another find_next_open_fd() I think sticking to the simple cond_resched() version I sent before is better for now until we see real-world performance issues. I was however missing a test for close_range(fd, fd, 0) anyway so I'll need to send a v2 with this test added. Christian
On Thu, May 23, 2019 at 1:51 PM Christian Brauner <christian@brauner.io> wrote: [...] > I kept it dumb and was about to reply that your solution introduces more > code when it seemed we wanted to keep this very simple for now. > But then I saw that find_next_opened_fd() already exists as > find_next_fd(). So it's actually not bad compared to what I sent in v1. > So - with some small tweaks (need to test it and all now) - how do we > feel about?: [...] > static int __close_next_open_fd(struct files_struct *files, unsigned *curfd, unsigned maxfd) > { > struct file *file = NULL; > unsigned fd; > struct fdtable *fdt; > > spin_lock(&files->file_lock); > fdt = files_fdtable(files); > fd = find_next_fd(fdt, *curfd); find_next_fd() finds free fds, not used ones. > if (fd >= fdt->max_fds || fd > maxfd) > goto out_unlock; > > file = fdt->fd[fd]; > rcu_assign_pointer(fdt->fd[fd], NULL); > __put_unused_fd(files, fd); You can't do __put_unused_fd() if the old pointer in fdt->fd[fd] was NULL - because that means that the fd has been reserved by another thread that is about to put a file pointer in there, and if you release the fd here, that messes up the refcounting (or hits the BUG_ON() in __fd_install()). > out_unlock: > spin_unlock(&files->file_lock); > > if (!file) > return -EBADF; > > *curfd = fd; > filp_close(file, files); > return 0; > } > > int __close_range(struct files_struct *files, unsigned fd, unsigned max_fd) > { > if (fd > max_fd) > return -EINVAL; > > while (fd <= max_fd) { Note that with a pattern like this, you have to be careful about what happens if someone gives you max_fd==0xffffffff - then this condition is always true and the loop can not terminate this way. > if (__close_next_fd(files, &fd, maxfd)) > break; (obviously it can still terminate this way) > cond_resched(); > fd++; > } > > return 0; > }
On Thu, May 23, 2019 at 04:32:14PM +0200, Jann Horn wrote: > On Thu, May 23, 2019 at 1:51 PM Christian Brauner <christian@brauner.io> wrote: > [...] > > I kept it dumb and was about to reply that your solution introduces more > > code when it seemed we wanted to keep this very simple for now. > > But then I saw that find_next_opened_fd() already exists as > > find_next_fd(). So it's actually not bad compared to what I sent in v1. > > So - with some small tweaks (need to test it and all now) - how do we > > feel about?: > [...] > > static int __close_next_open_fd(struct files_struct *files, unsigned *curfd, unsigned maxfd) > > { > > struct file *file = NULL; > > unsigned fd; > > struct fdtable *fdt; > > > > spin_lock(&files->file_lock); > > fdt = files_fdtable(files); > > fd = find_next_fd(fdt, *curfd); > > find_next_fd() finds free fds, not used ones. > > > if (fd >= fdt->max_fds || fd > maxfd) > > goto out_unlock; > > > > file = fdt->fd[fd]; > > rcu_assign_pointer(fdt->fd[fd], NULL); > > __put_unused_fd(files, fd); > > You can't do __put_unused_fd() if the old pointer in fdt->fd[fd] was > NULL - because that means that the fd has been reserved by another > thread that is about to put a file pointer in there, and if you > release the fd here, that messes up the refcounting (or hits the > BUG_ON() in __fd_install()). > > > out_unlock: > > spin_unlock(&files->file_lock); > > > > if (!file) > > return -EBADF; > > > > *curfd = fd; > > filp_close(file, files); > > return 0; > > } > > > > int __close_range(struct files_struct *files, unsigned fd, unsigned max_fd) > > { > > if (fd > max_fd) > > return -EINVAL; > > > > while (fd <= max_fd) { > > Note that with a pattern like this, you have to be careful about what > happens if someone gives you max_fd==0xffffffff - then this condition > is always true and the loop can not terminate this way. > > > if (__close_next_fd(files, &fd, maxfd)) > > break; > > (obviously it can still terminate this way) Yup, this was only a quick draft. I think the dumb simple thing that I did before was the best way to do it for now. I first thought that the find_next_open_fd() function already exists but when I went to write a POC for testing realized it doesn't anyway.
On 05/23, Christian Brauner wrote: > > So given that we would really need another find_next_open_fd() I think > sticking to the simple cond_resched() version I sent before is better > for now until we see real-world performance issues. OK, agreed. Oleg.
On 22.05.2019 18:52, Christian Brauner wrote:> This adds the close_range() syscall. It allows to efficiently close a range > of file descriptors up to all file descriptors of a calling task. > > The syscall came up in a recent discussion around the new mount API and > making new file descriptor types cloexec by default. During this > discussion, Al suggested the close_range() syscall (cf. [1]). Note, a > syscall in this manner has been requested by various people over time. > > First, it helps to close all file descriptors of an exec()ing task. This > can be done safely via (quoting Al's example from [1] verbatim): > > /* that exec is sensitive */ > unshare(CLONE_FILES); > /* we don't want anything past stderr here */ > close_range(3, ~0U); > execve(....); > > The code snippet above is one way of working around the problem that file > descriptors are not cloexec by default. This is aggravated by the fact that > we can't just switch them over without massively regressing userspace. For > a whole class of programs having an in-kernel method of closing all file > descriptors is very helpful (e.g. demons, service managers, programming > language standard libraries, container managers etc.). > (Please note, unshare(CLONE_FILES) should only be needed if the calling > task is multi-threaded and shares the file descriptor table with another > thread in which case two threads could race with one thread allocating > file descriptors and the other one closing them via close_range(). For the > general case close_range() before the execve() is sufficient.) > > Second, it allows userspace to avoid implementing closing all file > descriptors by parsing through /proc/<pid>/fd/* and calling close() on each > file descriptor. From looking at various large(ish) userspace code bases > this or similar patterns are very common in: > - service managers (cf. [4]) > - libcs (cf. [6]) > - container runtimes (cf. [5]) > - programming language runtimes/standard libraries > - Python (cf. [2]) > - Rust (cf. [7], [8]) > As Dmitry pointed out there's even a long-standing glibc bug about missing > kernel support for this task (cf. [3]). > In addition, the syscall will also work for tasks that do not have procfs > mounted and on kernels that do not have procfs support compiled in. In such > situations the only way to make sure that all file descriptors are closed > is to call close() on each file descriptor up to UINT_MAX or RLIMIT_NOFILE, > OPEN_MAX trickery (cf. comment [8] on Rust). > > The performance is striking. For good measure, comparing the following > simple close_all_fds() userspace implementation that is essentially just > glibc's version in [6]: > > static int close_all_fds(void) > { > int dir_fd; > DIR *dir; > struct dirent *direntp; > > dir = opendir("/proc/self/fd"); > if (!dir) > return -1; > dir_fd = dirfd(dir); > while ((direntp = readdir(dir))) { > int fd; > if (strcmp(direntp->d_name, ".") == 0) > continue; > if (strcmp(direntp->d_name, "..") == 0) > continue; > fd = atoi(direntp->d_name); > if (fd == dir_fd || fd == 0 || fd == 1 || fd == 2) > continue; > close(fd); > } > closedir(dir); > return 0; > } > > to close_range() yields: > 1. closing 4 open files: > - close_all_fds(): ~280 us > - close_range(): ~24 us > > 2. closing 1000 open files: > - close_all_fds(): ~5000 us > - close_range(): ~800 us > > close_range() is designed to allow for some flexibility. Specifically, it > does not simply always close all open file descriptors of a task. Instead, > callers can specify an upper bound. > This is e.g. useful for scenarios where specific file descriptors are > created with well-known numbers that are supposed to be excluded from > getting closed. > For extra paranoia close_range() comes with a flags argument. This can e.g. > be used to implement extension. Once can imagine userspace wanting to stop > at the first error instead of ignoring errors under certain circumstances. > There might be other valid ideas in the future. In any case, a flag > argument doesn't hurt and keeps us on the safe side. Here is another strange but real-live scenario: crash handler for dumping core. If applications has network connections it would be better to close them all, otherwise clients will wait until end of dumping process or timeout. Also closing normal files might be a good idea for releasing locks. But simple closing might race with other threads - closed fd will be reused while some code still thinks it refers to original file. Our solution closes files without freeing fd: it opens /dev/null and replaces all opened descriptors using dup2. So, special flag for close_range() could close files without clearing bitmap. Effect should be the same - fd wouldn't be reused. Actually two flags for two phases: closing files and releasing fd. > > From an implementation side this is kept rather dumb. It saw some input > from David and Jann but all nonsense is obviously my own! > - Errors to close file descriptors are currently ignored. (Could be changed > by setting a flag in the future if needed.) > - __close_range() is a rather simplistic wrapper around __close_fd(). > My reasoning behind this is based on the nature of how __close_fd() needs > to release an fd. But maybe I misunderstood specifics: > We take the files_lock and rcu-dereference the fdtable of the calling > task, we find the entry in the fdtable, get the file and need to release > files_lock before calling filp_close(). > In the meantime the fdtable might have been altered so we can't just > retake the spinlock and keep the old rcu-reference of the fdtable > around. Instead we need to grab a fresh reference to the fdtable. > If my reasoning is correct then there's really no point in fancyfying > __close_range(): We just need to rcu-dereference the fdtable of the > calling task once to cap the max_fd value correctly and then go on > calling __close_fd() in a loop. > > /* References */ > [1]: https://lore.kernel.org/lkml/20190516165021.GD17978@ZenIV.linux.org.uk/ > [2]: https://github.com/python/cpython/blob/9e4f2f3a6b8ee995c365e86d976937c141d867f8/Modules/_posixsubprocess.c#L220 > [3]: https://sourceware.org/bugzilla/show_bug.cgi?id=10353#c7 > [4]: https://github.com/systemd/systemd/blob/5238e9575906297608ff802a27e2ff9effa3b338/src/basic/fd-util.c#L217 > [5]: https://github.com/lxc/lxc/blob/ddf4b77e11a4d08f09b7b9cd13e593f8c047edc5/src/lxc/start.c#L236 > [6]: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/grantpt.c;h=2030e07fa6e652aac32c775b8c6e005844c3c4eb;hb=HEAD#l17 > Note that this is an internal implementation that is not exported. > Currently, libc seems to not provide an exported version of this > because of missing kernel support to do this. > [7]: https://github.com/rust-lang/rust/issues/12148 > [8]: https://github.com/rust-lang/rust/blob/5f47c0613ed4eb46fca3633c1297364c09e5e451/src/libstd/sys/unix/process2.rs#L303-L308 > Rust's solution is slightly different but is equally unperformant. > Rust calls getdtablesize() which is a glibc library function that > simply returns the current RLIMIT_NOFILE or OPEN_MAX values. Rust then > goes on to call close() on each fd. That's obviously overkill for most > tasks. Rarely, tasks - especially non-demons - hit RLIMIT_NOFILE or > OPEN_MAX. > Let's be nice and assume an unprivileged user with RLIMIT_NOFILE set > to 1024. Even in this case, there's a very high chance that in the > common case Rust is calling the close() syscall 1021 times pointlessly > if the task just has 0, 1, and 2 open. > > Suggested-by: Al Viro <viro@zeniv.linux.org.uk> > Signed-off-by: Christian Brauner <christian@brauner.io> > Cc: Arnd Bergmann <arnd@arndb.de> > Cc: Jann Horn <jannh@google.com> > Cc: David Howells <dhowells@redhat.com> > Cc: Dmitry V. Levin <ldv@altlinux.org> > Cc: Oleg Nesterov <oleg@redhat.com> > Cc: Linus Torvalds <torvalds@linux-foundation.org> > Cc: Florian Weimer <fweimer@redhat.com> > Cc: linux-api@vger.kernel.org > --- > v1: > - Linus Torvalds <torvalds@linux-foundation.org>: > - add cond_resched() to yield cpu when closing a lot of file descriptors > - Al Viro <viro@zeniv.linux.org.uk>: > - add cond_resched() to yield cpu when closing a lot of file descriptors > --- > arch/alpha/kernel/syscalls/syscall.tbl | 1 + > arch/arm/tools/syscall.tbl | 1 + > arch/arm64/include/asm/unistd32.h | 2 + > arch/ia64/kernel/syscalls/syscall.tbl | 1 + > arch/m68k/kernel/syscalls/syscall.tbl | 1 + > arch/microblaze/kernel/syscalls/syscall.tbl | 1 + > arch/mips/kernel/syscalls/syscall_n32.tbl | 1 + > arch/mips/kernel/syscalls/syscall_n64.tbl | 1 + > arch/mips/kernel/syscalls/syscall_o32.tbl | 1 + > arch/parisc/kernel/syscalls/syscall.tbl | 1 + > arch/powerpc/kernel/syscalls/syscall.tbl | 1 + > arch/s390/kernel/syscalls/syscall.tbl | 1 + > arch/sh/kernel/syscalls/syscall.tbl | 1 + > arch/sparc/kernel/syscalls/syscall.tbl | 1 + > arch/x86/entry/syscalls/syscall_32.tbl | 1 + > arch/x86/entry/syscalls/syscall_64.tbl | 1 + > arch/xtensa/kernel/syscalls/syscall.tbl | 1 + > fs/file.c | 63 ++++++++++++++++++--- > fs/open.c | 20 +++++++ > include/linux/fdtable.h | 2 + > include/linux/syscalls.h | 2 + > include/uapi/asm-generic/unistd.h | 4 +- > 22 files changed, 100 insertions(+), 9 deletions(-) > It would be better to split arch/ wiring into separate patch for better readability.
From: Konstantin Khlebnikov > Sent: 23 May 2019 17:22 .... > > In addition, the syscall will also work for tasks that do not have procfs > > mounted and on kernels that do not have procfs support compiled in. In such > > situations the only way to make sure that all file descriptors are closed > > is to call close() on each file descriptor up to UINT_MAX or RLIMIT_NOFILE, > > OPEN_MAX trickery (cf. comment [8] on Rust). Code using RLIMIT_NOFILE is broken. It is easy to reduce the hard limit below that of an open fd. David - Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK Registration No: 1397386 (Wales)
On Thu, May 23, 2019 at 07:22:17PM +0300, Konstantin Khlebnikov wrote: > On 22.05.2019 18:52, Christian Brauner wrote:> This adds the close_range() syscall. It allows to efficiently close a range > > of file descriptors up to all file descriptors of a calling task. > > > > The syscall came up in a recent discussion around the new mount API and > > making new file descriptor types cloexec by default. During this > > discussion, Al suggested the close_range() syscall (cf. [1]). Note, a > > syscall in this manner has been requested by various people over time. > > > > First, it helps to close all file descriptors of an exec()ing task. This > > can be done safely via (quoting Al's example from [1] verbatim): > > > > /* that exec is sensitive */ > > unshare(CLONE_FILES); > > /* we don't want anything past stderr here */ > > close_range(3, ~0U); > > execve(....); > > > > The code snippet above is one way of working around the problem that file > > descriptors are not cloexec by default. This is aggravated by the fact that > > we can't just switch them over without massively regressing userspace. For > > a whole class of programs having an in-kernel method of closing all file > > descriptors is very helpful (e.g. demons, service managers, programming > > language standard libraries, container managers etc.). > > (Please note, unshare(CLONE_FILES) should only be needed if the calling > > task is multi-threaded and shares the file descriptor table with another > > thread in which case two threads could race with one thread allocating > > file descriptors and the other one closing them via close_range(). For the > > general case close_range() before the execve() is sufficient.) > > > > Second, it allows userspace to avoid implementing closing all file > > descriptors by parsing through /proc/<pid>/fd/* and calling close() on each > > file descriptor. From looking at various large(ish) userspace code bases > > this or similar patterns are very common in: > > - service managers (cf. [4]) > > - libcs (cf. [6]) > > - container runtimes (cf. [5]) > > - programming language runtimes/standard libraries > > - Python (cf. [2]) > > - Rust (cf. [7], [8]) > > As Dmitry pointed out there's even a long-standing glibc bug about missing > > kernel support for this task (cf. [3]). > > In addition, the syscall will also work for tasks that do not have procfs > > mounted and on kernels that do not have procfs support compiled in. In such > > situations the only way to make sure that all file descriptors are closed > > is to call close() on each file descriptor up to UINT_MAX or RLIMIT_NOFILE, > > OPEN_MAX trickery (cf. comment [8] on Rust). > > > > The performance is striking. For good measure, comparing the following > > simple close_all_fds() userspace implementation that is essentially just > > glibc's version in [6]: > > > > static int close_all_fds(void) > > { > > int dir_fd; > > DIR *dir; > > struct dirent *direntp; > > > > dir = opendir("/proc/self/fd"); > > if (!dir) > > return -1; > > dir_fd = dirfd(dir); > > while ((direntp = readdir(dir))) { > > int fd; > > if (strcmp(direntp->d_name, ".") == 0) > > continue; > > if (strcmp(direntp->d_name, "..") == 0) > > continue; > > fd = atoi(direntp->d_name); > > if (fd == dir_fd || fd == 0 || fd == 1 || fd == 2) > > continue; > > close(fd); > > } > > closedir(dir); > > return 0; > > } > > > > to close_range() yields: > > 1. closing 4 open files: > > - close_all_fds(): ~280 us > > - close_range(): ~24 us > > > > 2. closing 1000 open files: > > - close_all_fds(): ~5000 us > > - close_range(): ~800 us > > > > close_range() is designed to allow for some flexibility. Specifically, it > > does not simply always close all open file descriptors of a task. Instead, > > callers can specify an upper bound. > > This is e.g. useful for scenarios where specific file descriptors are > > created with well-known numbers that are supposed to be excluded from > > getting closed. > > For extra paranoia close_range() comes with a flags argument. This can e.g. > > be used to implement extension. Once can imagine userspace wanting to stop > > at the first error instead of ignoring errors under certain circumstances. > > > There might be other valid ideas in the future. In any case, a flag > > argument doesn't hurt and keeps us on the safe side. > > Here is another strange but real-live scenario: crash handler for dumping core. > > If applications has network connections it would be better to close them all, > otherwise clients will wait until end of dumping process or timeout. > Also closing normal files might be a good idea for releasing locks. > > But simple closing might race with other threads - closed fd will be reused > while some code still thinks it refers to original file. > > Our solution closes files without freeing fd: it opens /dev/null and > replaces all opened descriptors using dup2. > > So, special flag for close_range() could close files without clearing bitmap. > Effect should be the same - fd wouldn't be reused. > > Actually two flags for two phases: closing files and releasing fd. > > > > > From an implementation side this is kept rather dumb. It saw some input > > from David and Jann but all nonsense is obviously my own! > > - Errors to close file descriptors are currently ignored. (Could be changed > > by setting a flag in the future if needed.) > > - __close_range() is a rather simplistic wrapper around __close_fd(). > > My reasoning behind this is based on the nature of how __close_fd() needs > > to release an fd. But maybe I misunderstood specifics: > > We take the files_lock and rcu-dereference the fdtable of the calling > > task, we find the entry in the fdtable, get the file and need to release > > files_lock before calling filp_close(). > > In the meantime the fdtable might have been altered so we can't just > > retake the spinlock and keep the old rcu-reference of the fdtable > > around. Instead we need to grab a fresh reference to the fdtable. > > If my reasoning is correct then there's really no point in fancyfying > > __close_range(): We just need to rcu-dereference the fdtable of the > > calling task once to cap the max_fd value correctly and then go on > > calling __close_fd() in a loop. > > > > /* References */ > > [1]: https://lore.kernel.org/lkml/20190516165021.GD17978@ZenIV.linux.org.uk/ > > [2]: https://github.com/python/cpython/blob/9e4f2f3a6b8ee995c365e86d976937c141d867f8/Modules/_posixsubprocess.c#L220 > > [3]: https://sourceware.org/bugzilla/show_bug.cgi?id=10353#c7 > > [4]: https://github.com/systemd/systemd/blob/5238e9575906297608ff802a27e2ff9effa3b338/src/basic/fd-util.c#L217 > > [5]: https://github.com/lxc/lxc/blob/ddf4b77e11a4d08f09b7b9cd13e593f8c047edc5/src/lxc/start.c#L236 > > [6]: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/grantpt.c;h=2030e07fa6e652aac32c775b8c6e005844c3c4eb;hb=HEAD#l17 > > Note that this is an internal implementation that is not exported. > > Currently, libc seems to not provide an exported version of this > > because of missing kernel support to do this. > > [7]: https://github.com/rust-lang/rust/issues/12148 > > [8]: https://github.com/rust-lang/rust/blob/5f47c0613ed4eb46fca3633c1297364c09e5e451/src/libstd/sys/unix/process2.rs#L303-L308 > > Rust's solution is slightly different but is equally unperformant. > > Rust calls getdtablesize() which is a glibc library function that > > simply returns the current RLIMIT_NOFILE or OPEN_MAX values. Rust then > > goes on to call close() on each fd. That's obviously overkill for most > > tasks. Rarely, tasks - especially non-demons - hit RLIMIT_NOFILE or > > OPEN_MAX. > > Let's be nice and assume an unprivileged user with RLIMIT_NOFILE set > > to 1024. Even in this case, there's a very high chance that in the > > common case Rust is calling the close() syscall 1021 times pointlessly > > if the task just has 0, 1, and 2 open. > > > > Suggested-by: Al Viro <viro@zeniv.linux.org.uk> > > Signed-off-by: Christian Brauner <christian@brauner.io> > > Cc: Arnd Bergmann <arnd@arndb.de> > > Cc: Jann Horn <jannh@google.com> > > Cc: David Howells <dhowells@redhat.com> > > Cc: Dmitry V. Levin <ldv@altlinux.org> > > Cc: Oleg Nesterov <oleg@redhat.com> > > Cc: Linus Torvalds <torvalds@linux-foundation.org> > > Cc: Florian Weimer <fweimer@redhat.com> > > Cc: linux-api@vger.kernel.org > > --- > > v1: > > - Linus Torvalds <torvalds@linux-foundation.org>: > > - add cond_resched() to yield cpu when closing a lot of file descriptors > > - Al Viro <viro@zeniv.linux.org.uk>: > > - add cond_resched() to yield cpu when closing a lot of file descriptors > > --- > > arch/alpha/kernel/syscalls/syscall.tbl | 1 + > > arch/arm/tools/syscall.tbl | 1 + > > arch/arm64/include/asm/unistd32.h | 2 + > > arch/ia64/kernel/syscalls/syscall.tbl | 1 + > > arch/m68k/kernel/syscalls/syscall.tbl | 1 + > > arch/microblaze/kernel/syscalls/syscall.tbl | 1 + > > arch/mips/kernel/syscalls/syscall_n32.tbl | 1 + > > arch/mips/kernel/syscalls/syscall_n64.tbl | 1 + > > arch/mips/kernel/syscalls/syscall_o32.tbl | 1 + > > arch/parisc/kernel/syscalls/syscall.tbl | 1 + > > arch/powerpc/kernel/syscalls/syscall.tbl | 1 + > > arch/s390/kernel/syscalls/syscall.tbl | 1 + > > arch/sh/kernel/syscalls/syscall.tbl | 1 + > > arch/sparc/kernel/syscalls/syscall.tbl | 1 + > > arch/x86/entry/syscalls/syscall_32.tbl | 1 + > > arch/x86/entry/syscalls/syscall_64.tbl | 1 + > > arch/xtensa/kernel/syscalls/syscall.tbl | 1 + > > fs/file.c | 63 ++++++++++++++++++--- > > fs/open.c | 20 +++++++ > > include/linux/fdtable.h | 2 + > > include/linux/syscalls.h | 2 + > > include/uapi/asm-generic/unistd.h | 4 +- > > 22 files changed, 100 insertions(+), 9 deletions(-) > > > > It would be better to split arch/ wiring into separate patch for better readability. Ok. You mean only do x86 - seems to be the standard - and then move the others into a separate patch? Doesn't seem worth to have a patch per-arch, I'd think.
On Thu, May 23, 2019 at 6:33 PM Christian Brauner <christian@brauner.io> wrote: > On Thu, May 23, 2019 at 07:22:17PM +0300, Konstantin Khlebnikov wrote: > > On 22.05.2019 18:52, Christian Brauner wrote:> This adds the close_range() syscall. It allows to efficiently close a range > > > 22 files changed, 100 insertions(+), 9 deletions(-) > > > > > > > It would be better to split arch/ wiring into separate patch for better readability. > > Ok. You mean only do x86 - seems to be the standard - and then move the > others into a separate patch? Doesn't seem worth to have a patch > per-arch, I'd think. I think I would prefer the first patch to just add the call without wiring it up anywhere, and a second patch do add it on all architectures including x86. Arnd
On Fri, May 24, 2019 at 09:43:53AM +0200, Arnd Bergmann wrote: > On Thu, May 23, 2019 at 6:33 PM Christian Brauner <christian@brauner.io> wrote: > > On Thu, May 23, 2019 at 07:22:17PM +0300, Konstantin Khlebnikov wrote: > > > On 22.05.2019 18:52, Christian Brauner wrote:> This adds the close_range() syscall. It allows to efficiently close a range > > > > 22 files changed, 100 insertions(+), 9 deletions(-) > > > > > > > > > > It would be better to split arch/ wiring into separate patch for better readability. > > > > Ok. You mean only do x86 - seems to be the standard - and then move the > > others into a separate patch? Doesn't seem worth to have a patch > > per-arch, I'd think. > > I think I would prefer the first patch to just add the call without wiring it up > anywhere, and a second patch do add it on all architectures including x86. I've split this into two patches and also bumped arm64 __NR_compat_syscalls that I've missed before as you mentioned! Thanks! Christian
On Thu, May 23, 2019 at 07:22:17PM +0300, Konstantin Khlebnikov wrote: > On 22.05.2019 18:52, Christian Brauner wrote:> This adds the close_range() syscall. It allows to efficiently close a range > > of file descriptors up to all file descriptors of a calling task. > > > > The syscall came up in a recent discussion around the new mount API and > > making new file descriptor types cloexec by default. During this > > discussion, Al suggested the close_range() syscall (cf. [1]). Note, a > > syscall in this manner has been requested by various people over time. > > > > First, it helps to close all file descriptors of an exec()ing task. This > > can be done safely via (quoting Al's example from [1] verbatim): > > > > /* that exec is sensitive */ > > unshare(CLONE_FILES); > > /* we don't want anything past stderr here */ > > close_range(3, ~0U); > > execve(....); > > > > The code snippet above is one way of working around the problem that file > > descriptors are not cloexec by default. This is aggravated by the fact that > > we can't just switch them over without massively regressing userspace. For > > a whole class of programs having an in-kernel method of closing all file > > descriptors is very helpful (e.g. demons, service managers, programming > > language standard libraries, container managers etc.). > > (Please note, unshare(CLONE_FILES) should only be needed if the calling > > task is multi-threaded and shares the file descriptor table with another > > thread in which case two threads could race with one thread allocating > > file descriptors and the other one closing them via close_range(). For the > > general case close_range() before the execve() is sufficient.) > > > > Second, it allows userspace to avoid implementing closing all file > > descriptors by parsing through /proc/<pid>/fd/* and calling close() on each > > file descriptor. From looking at various large(ish) userspace code bases > > this or similar patterns are very common in: > > - service managers (cf. [4]) > > - libcs (cf. [6]) > > - container runtimes (cf. [5]) > > - programming language runtimes/standard libraries > > - Python (cf. [2]) > > - Rust (cf. [7], [8]) > > As Dmitry pointed out there's even a long-standing glibc bug about missing > > kernel support for this task (cf. [3]). > > In addition, the syscall will also work for tasks that do not have procfs > > mounted and on kernels that do not have procfs support compiled in. In such > > situations the only way to make sure that all file descriptors are closed > > is to call close() on each file descriptor up to UINT_MAX or RLIMIT_NOFILE, > > OPEN_MAX trickery (cf. comment [8] on Rust). > > > > The performance is striking. For good measure, comparing the following > > simple close_all_fds() userspace implementation that is essentially just > > glibc's version in [6]: > > > > static int close_all_fds(void) > > { > > int dir_fd; > > DIR *dir; > > struct dirent *direntp; > > > > dir = opendir("/proc/self/fd"); > > if (!dir) > > return -1; > > dir_fd = dirfd(dir); > > while ((direntp = readdir(dir))) { > > int fd; > > if (strcmp(direntp->d_name, ".") == 0) > > continue; > > if (strcmp(direntp->d_name, "..") == 0) > > continue; > > fd = atoi(direntp->d_name); > > if (fd == dir_fd || fd == 0 || fd == 1 || fd == 2) > > continue; > > close(fd); > > } > > closedir(dir); > > return 0; > > } > > > > to close_range() yields: > > 1. closing 4 open files: > > - close_all_fds(): ~280 us > > - close_range(): ~24 us > > > > 2. closing 1000 open files: > > - close_all_fds(): ~5000 us > > - close_range(): ~800 us > > > > close_range() is designed to allow for some flexibility. Specifically, it > > does not simply always close all open file descriptors of a task. Instead, > > callers can specify an upper bound. > > This is e.g. useful for scenarios where specific file descriptors are > > created with well-known numbers that are supposed to be excluded from > > getting closed. > > For extra paranoia close_range() comes with a flags argument. This can e.g. > > be used to implement extension. Once can imagine userspace wanting to stop > > at the first error instead of ignoring errors under certain circumstances. > > > There might be other valid ideas in the future. In any case, a flag > > argument doesn't hurt and keeps us on the safe side. > > Here is another strange but real-live scenario: crash handler for dumping core. > > If applications has network connections it would be better to close them all, > otherwise clients will wait until end of dumping process or timeout. > Also closing normal files might be a good idea for releasing locks. > > But simple closing might race with other threads - closed fd will be reused > while some code still thinks it refers to original file. > > Our solution closes files without freeing fd: it opens /dev/null and > replaces all opened descriptors using dup2. > > So, special flag for close_range() could close files without clearing bitmap. > Effect should be the same - fd wouldn't be reused. > > Actually two flags for two phases: closing files and releasing fd. Konstantin, I'm sorry, I totally missed that part of your mail yesterday. Without speaking to the feasibility of this it's at least a good illustration that people really do have the possible need for a flag argument. Thanks! Christian
diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl index 9e7704e44f6d..b55d93af8096 100644 --- a/arch/alpha/kernel/syscalls/syscall.tbl +++ b/arch/alpha/kernel/syscalls/syscall.tbl @@ -473,3 +473,4 @@ 541 common fsconfig sys_fsconfig 542 common fsmount sys_fsmount 543 common fspick sys_fspick +545 common close_range sys_close_range diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl index aaf479a9e92d..0125c97c75dd 100644 --- a/arch/arm/tools/syscall.tbl +++ b/arch/arm/tools/syscall.tbl @@ -447,3 +447,4 @@ 431 common fsconfig sys_fsconfig 432 common fsmount sys_fsmount 433 common fspick sys_fspick +435 common close_range sys_close_range diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h index c39e90600bb3..9a3270d29b42 100644 --- a/arch/arm64/include/asm/unistd32.h +++ b/arch/arm64/include/asm/unistd32.h @@ -886,6 +886,8 @@ __SYSCALL(__NR_fsconfig, sys_fsconfig) __SYSCALL(__NR_fsmount, sys_fsmount) #define __NR_fspick 433 __SYSCALL(__NR_fspick, sys_fspick) +#define __NR_close_range 435 +__SYSCALL(__NR_close_range, sys_close_range) /* * Please add new compat syscalls above this comment and update diff --git a/arch/ia64/kernel/syscalls/syscall.tbl b/arch/ia64/kernel/syscalls/syscall.tbl index e01df3f2f80d..1a90b464e96f 100644 --- a/arch/ia64/kernel/syscalls/syscall.tbl +++ b/arch/ia64/kernel/syscalls/syscall.tbl @@ -354,3 +354,4 @@ 431 common fsconfig sys_fsconfig 432 common fsmount sys_fsmount 433 common fspick sys_fspick +435 common close_range sys_close_range diff --git a/arch/m68k/kernel/syscalls/syscall.tbl b/arch/m68k/kernel/syscalls/syscall.tbl index 7e3d0734b2f3..2dee2050f9ef 100644 --- a/arch/m68k/kernel/syscalls/syscall.tbl +++ b/arch/m68k/kernel/syscalls/syscall.tbl @@ -433,3 +433,4 @@ 431 common fsconfig sys_fsconfig 432 common fsmount sys_fsmount 433 common fspick sys_fspick +435 common close_range sys_close_range diff --git a/arch/microblaze/kernel/syscalls/syscall.tbl b/arch/microblaze/kernel/syscalls/syscall.tbl index 26339e417695..923ef69e5a76 100644 --- a/arch/microblaze/kernel/syscalls/syscall.tbl +++ b/arch/microblaze/kernel/syscalls/syscall.tbl @@ -439,3 +439,4 @@ 431 common fsconfig sys_fsconfig 432 common fsmount sys_fsmount 433 common fspick sys_fspick +435 common close_range sys_close_range diff --git a/arch/mips/kernel/syscalls/syscall_n32.tbl b/arch/mips/kernel/syscalls/syscall_n32.tbl index 0e2dd68ade57..967ed9de51cd 100644 --- a/arch/mips/kernel/syscalls/syscall_n32.tbl +++ b/arch/mips/kernel/syscalls/syscall_n32.tbl @@ -372,3 +372,4 @@ 431 n32 fsconfig sys_fsconfig 432 n32 fsmount sys_fsmount 433 n32 fspick sys_fspick +435 n32 close_range sys_close_range diff --git a/arch/mips/kernel/syscalls/syscall_n64.tbl b/arch/mips/kernel/syscalls/syscall_n64.tbl index 5eebfa0d155c..71de731102b1 100644 --- a/arch/mips/kernel/syscalls/syscall_n64.tbl +++ b/arch/mips/kernel/syscalls/syscall_n64.tbl @@ -348,3 +348,4 @@ 431 n64 fsconfig sys_fsconfig 432 n64 fsmount sys_fsmount 433 n64 fspick sys_fspick +435 n64 close_range sys_close_range diff --git a/arch/mips/kernel/syscalls/syscall_o32.tbl b/arch/mips/kernel/syscalls/syscall_o32.tbl index 3cc1374e02d0..5a325ab29f88 100644 --- a/arch/mips/kernel/syscalls/syscall_o32.tbl +++ b/arch/mips/kernel/syscalls/syscall_o32.tbl @@ -421,3 +421,4 @@ 431 o32 fsconfig sys_fsconfig 432 o32 fsmount sys_fsmount 433 o32 fspick sys_fspick +435 o32 close_range sys_close_range diff --git a/arch/parisc/kernel/syscalls/syscall.tbl b/arch/parisc/kernel/syscalls/syscall.tbl index c9e377d59232..dcc0a0879139 100644 --- a/arch/parisc/kernel/syscalls/syscall.tbl +++ b/arch/parisc/kernel/syscalls/syscall.tbl @@ -430,3 +430,4 @@ 431 common fsconfig sys_fsconfig 432 common fsmount sys_fsmount 433 common fspick sys_fspick +435 common close_range sys_close_range diff --git a/arch/powerpc/kernel/syscalls/syscall.tbl b/arch/powerpc/kernel/syscalls/syscall.tbl index 103655d84b4b..ba2c1f078cbd 100644 --- a/arch/powerpc/kernel/syscalls/syscall.tbl +++ b/arch/powerpc/kernel/syscalls/syscall.tbl @@ -515,3 +515,4 @@ 431 common fsconfig sys_fsconfig 432 common fsmount sys_fsmount 433 common fspick sys_fspick +435 common close_range sys_close_range diff --git a/arch/s390/kernel/syscalls/syscall.tbl b/arch/s390/kernel/syscalls/syscall.tbl index e822b2964a83..d7c9043d2902 100644 --- a/arch/s390/kernel/syscalls/syscall.tbl +++ b/arch/s390/kernel/syscalls/syscall.tbl @@ -436,3 +436,4 @@ 431 common fsconfig sys_fsconfig sys_fsconfig 432 common fsmount sys_fsmount sys_fsmount 433 common fspick sys_fspick sys_fspick +435 common close_range sys_close_range sys_close_range diff --git a/arch/sh/kernel/syscalls/syscall.tbl b/arch/sh/kernel/syscalls/syscall.tbl index 016a727d4357..9b5e6bf0ce32 100644 --- a/arch/sh/kernel/syscalls/syscall.tbl +++ b/arch/sh/kernel/syscalls/syscall.tbl @@ -436,3 +436,4 @@ 431 common fsconfig sys_fsconfig 432 common fsmount sys_fsmount 433 common fspick sys_fspick +435 common close_range sys_close_range diff --git a/arch/sparc/kernel/syscalls/syscall.tbl b/arch/sparc/kernel/syscalls/syscall.tbl index e047480b1605..8c674a1e0072 100644 --- a/arch/sparc/kernel/syscalls/syscall.tbl +++ b/arch/sparc/kernel/syscalls/syscall.tbl @@ -479,3 +479,4 @@ 431 common fsconfig sys_fsconfig 432 common fsmount sys_fsmount 433 common fspick sys_fspick +435 common close_range sys_close_range diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl index ad968b7bac72..7f7a89a96707 100644 --- a/arch/x86/entry/syscalls/syscall_32.tbl +++ b/arch/x86/entry/syscalls/syscall_32.tbl @@ -438,3 +438,4 @@ 431 i386 fsconfig sys_fsconfig __ia32_sys_fsconfig 432 i386 fsmount sys_fsmount __ia32_sys_fsmount 433 i386 fspick sys_fspick __ia32_sys_fspick +435 i386 close_range sys_close_range __ia32_sys_close_range diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl index b4e6f9e6204a..0f7d47ae921c 100644 --- a/arch/x86/entry/syscalls/syscall_64.tbl +++ b/arch/x86/entry/syscalls/syscall_64.tbl @@ -355,6 +355,7 @@ 431 common fsconfig __x64_sys_fsconfig 432 common fsmount __x64_sys_fsmount 433 common fspick __x64_sys_fspick +435 common close_range __x64_sys_close_range # # x32-specific system call numbers start at 512 to avoid cache impact diff --git a/arch/xtensa/kernel/syscalls/syscall.tbl b/arch/xtensa/kernel/syscalls/syscall.tbl index 5fa0ee1c8e00..b489532265d0 100644 --- a/arch/xtensa/kernel/syscalls/syscall.tbl +++ b/arch/xtensa/kernel/syscalls/syscall.tbl @@ -404,3 +404,4 @@ 431 common fsconfig sys_fsconfig 432 common fsmount sys_fsmount 433 common fspick sys_fspick +435 common close_range sys_close_range diff --git a/fs/file.c b/fs/file.c index 3da91a112bab..54945efa046e 100644 --- a/fs/file.c +++ b/fs/file.c @@ -615,12 +615,9 @@ void fd_install(unsigned int fd, struct file *file) EXPORT_SYMBOL(fd_install); -/* - * The same warnings as for __alloc_fd()/__fd_install() apply here... - */ -int __close_fd(struct files_struct *files, unsigned fd) +static struct file *pick_file(struct files_struct *files, unsigned fd) { - struct file *file; + struct file *file = NULL; struct fdtable *fdt; spin_lock(&files->file_lock); @@ -632,15 +629,65 @@ int __close_fd(struct files_struct *files, unsigned fd) goto out_unlock; rcu_assign_pointer(fdt->fd[fd], NULL); __put_unused_fd(files, fd); - spin_unlock(&files->file_lock); - return filp_close(file, files); out_unlock: spin_unlock(&files->file_lock); - return -EBADF; + return file; +} + +/* + * The same warnings as for __alloc_fd()/__fd_install() apply here... + */ +int __close_fd(struct files_struct *files, unsigned fd) +{ + struct file *file; + + file = pick_file(files, fd); + if (!file) + return -EBADF; + + return filp_close(file, files); } EXPORT_SYMBOL(__close_fd); /* for ksys_close() */ +/** + * __close_range() - Close all file descriptors in a given range. + * + * @fd: starting file descriptor to close + * @max_fd: last file descriptor to close + * + * This closes a range of file descriptors. All file descriptors + * from @fd up to and including @max_fd are closed. + */ +int __close_range(struct files_struct *files, unsigned fd, unsigned max_fd) +{ + unsigned int cur_max; + + if (fd > max_fd) + return -EINVAL; + + rcu_read_lock(); + cur_max = files_fdtable(files)->max_fds; + rcu_read_unlock(); + + /* cap to last valid index into fdtable */ + if (max_fd >= cur_max) + max_fd = cur_max - 1; + + while (fd <= max_fd) { + struct file *file; + + file = pick_file(files, fd++); + if (!file) + continue; + + filp_close(file, files); + cond_resched(); + } + + return 0; +} + /* * variant of __close_fd that gets a ref on the file for later fput */ diff --git a/fs/open.c b/fs/open.c index 9c7d724a6f67..c7baaee7aa47 100644 --- a/fs/open.c +++ b/fs/open.c @@ -1174,6 +1174,26 @@ SYSCALL_DEFINE1(close, unsigned int, fd) return retval; } +/** + * close_range() - Close all file descriptors in a given range. + * + * @fd: starting file descriptor to close + * @max_fd: last file descriptor to close + * @flags: reserved for future extensions + * + * This closes a range of file descriptors. All file descriptors + * from @fd up to and including @max_fd are closed. + * Currently, errors to close a given file descriptor are ignored. + */ +SYSCALL_DEFINE3(close_range, unsigned int, fd, unsigned int, max_fd, + unsigned int, flags) +{ + if (flags) + return -EINVAL; + + return __close_range(current->files, fd, max_fd); +} + /* * This routine simulates a hangup on the tty, to arrange that users * are given clean terminals at login time. diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h index f07c55ea0c22..fcd07181a365 100644 --- a/include/linux/fdtable.h +++ b/include/linux/fdtable.h @@ -121,6 +121,8 @@ extern void __fd_install(struct files_struct *files, unsigned int fd, struct file *file); extern int __close_fd(struct files_struct *files, unsigned int fd); +extern int __close_range(struct files_struct *files, unsigned int fd, + unsigned int max_fd); extern int __close_fd_get_file(unsigned int fd, struct file **res); extern struct kmem_cache *files_cachep; diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index e2870fe1be5b..c0189e223255 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -441,6 +441,8 @@ asmlinkage long sys_fchown(unsigned int fd, uid_t user, gid_t group); asmlinkage long sys_openat(int dfd, const char __user *filename, int flags, umode_t mode); asmlinkage long sys_close(unsigned int fd); +asmlinkage long sys_close_range(unsigned int fd, unsigned int max_fd, + unsigned int flags); asmlinkage long sys_vhangup(void); /* fs/pipe.c */ diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h index a87904daf103..3f36c8745d24 100644 --- a/include/uapi/asm-generic/unistd.h +++ b/include/uapi/asm-generic/unistd.h @@ -844,9 +844,11 @@ __SYSCALL(__NR_fsconfig, sys_fsconfig) __SYSCALL(__NR_fsmount, sys_fsmount) #define __NR_fspick 433 __SYSCALL(__NR_fspick, sys_fspick) +#define __NR_close_range 435 +__SYSCALL(__NR_close_range, sys_close_range) #undef __NR_syscalls -#define __NR_syscalls 434 +#define __NR_syscalls 436 /* * 32 bit systems traditionally used different
This adds the close_range() syscall. It allows to efficiently close a range of file descriptors up to all file descriptors of a calling task. The syscall came up in a recent discussion around the new mount API and making new file descriptor types cloexec by default. During this discussion, Al suggested the close_range() syscall (cf. [1]). Note, a syscall in this manner has been requested by various people over time. First, it helps to close all file descriptors of an exec()ing task. This can be done safely via (quoting Al's example from [1] verbatim): /* that exec is sensitive */ unshare(CLONE_FILES); /* we don't want anything past stderr here */ close_range(3, ~0U); execve(....); The code snippet above is one way of working around the problem that file descriptors are not cloexec by default. This is aggravated by the fact that we can't just switch them over without massively regressing userspace. For a whole class of programs having an in-kernel method of closing all file descriptors is very helpful (e.g. demons, service managers, programming language standard libraries, container managers etc.). (Please note, unshare(CLONE_FILES) should only be needed if the calling task is multi-threaded and shares the file descriptor table with another thread in which case two threads could race with one thread allocating file descriptors and the other one closing them via close_range(). For the general case close_range() before the execve() is sufficient.) Second, it allows userspace to avoid implementing closing all file descriptors by parsing through /proc/<pid>/fd/* and calling close() on each file descriptor. From looking at various large(ish) userspace code bases this or similar patterns are very common in: - service managers (cf. [4]) - libcs (cf. [6]) - container runtimes (cf. [5]) - programming language runtimes/standard libraries - Python (cf. [2]) - Rust (cf. [7], [8]) As Dmitry pointed out there's even a long-standing glibc bug about missing kernel support for this task (cf. [3]). In addition, the syscall will also work for tasks that do not have procfs mounted and on kernels that do not have procfs support compiled in. In such situations the only way to make sure that all file descriptors are closed is to call close() on each file descriptor up to UINT_MAX or RLIMIT_NOFILE, OPEN_MAX trickery (cf. comment [8] on Rust). The performance is striking. For good measure, comparing the following simple close_all_fds() userspace implementation that is essentially just glibc's version in [6]: static int close_all_fds(void) { int dir_fd; DIR *dir; struct dirent *direntp; dir = opendir("/proc/self/fd"); if (!dir) return -1; dir_fd = dirfd(dir); while ((direntp = readdir(dir))) { int fd; if (strcmp(direntp->d_name, ".") == 0) continue; if (strcmp(direntp->d_name, "..") == 0) continue; fd = atoi(direntp->d_name); if (fd == dir_fd || fd == 0 || fd == 1 || fd == 2) continue; close(fd); } closedir(dir); return 0; } to close_range() yields: 1. closing 4 open files: - close_all_fds(): ~280 us - close_range(): ~24 us 2. closing 1000 open files: - close_all_fds(): ~5000 us - close_range(): ~800 us close_range() is designed to allow for some flexibility. Specifically, it does not simply always close all open file descriptors of a task. Instead, callers can specify an upper bound. This is e.g. useful for scenarios where specific file descriptors are created with well-known numbers that are supposed to be excluded from getting closed. For extra paranoia close_range() comes with a flags argument. This can e.g. be used to implement extension. Once can imagine userspace wanting to stop at the first error instead of ignoring errors under certain circumstances. There might be other valid ideas in the future. In any case, a flag argument doesn't hurt and keeps us on the safe side. From an implementation side this is kept rather dumb. It saw some input from David and Jann but all nonsense is obviously my own! - Errors to close file descriptors are currently ignored. (Could be changed by setting a flag in the future if needed.) - __close_range() is a rather simplistic wrapper around __close_fd(). My reasoning behind this is based on the nature of how __close_fd() needs to release an fd. But maybe I misunderstood specifics: We take the files_lock and rcu-dereference the fdtable of the calling task, we find the entry in the fdtable, get the file and need to release files_lock before calling filp_close(). In the meantime the fdtable might have been altered so we can't just retake the spinlock and keep the old rcu-reference of the fdtable around. Instead we need to grab a fresh reference to the fdtable. If my reasoning is correct then there's really no point in fancyfying __close_range(): We just need to rcu-dereference the fdtable of the calling task once to cap the max_fd value correctly and then go on calling __close_fd() in a loop. /* References */ [1]: https://lore.kernel.org/lkml/20190516165021.GD17978@ZenIV.linux.org.uk/ [2]: https://github.com/python/cpython/blob/9e4f2f3a6b8ee995c365e86d976937c141d867f8/Modules/_posixsubprocess.c#L220 [3]: https://sourceware.org/bugzilla/show_bug.cgi?id=10353#c7 [4]: https://github.com/systemd/systemd/blob/5238e9575906297608ff802a27e2ff9effa3b338/src/basic/fd-util.c#L217 [5]: https://github.com/lxc/lxc/blob/ddf4b77e11a4d08f09b7b9cd13e593f8c047edc5/src/lxc/start.c#L236 [6]: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/grantpt.c;h=2030e07fa6e652aac32c775b8c6e005844c3c4eb;hb=HEAD#l17 Note that this is an internal implementation that is not exported. Currently, libc seems to not provide an exported version of this because of missing kernel support to do this. [7]: https://github.com/rust-lang/rust/issues/12148 [8]: https://github.com/rust-lang/rust/blob/5f47c0613ed4eb46fca3633c1297364c09e5e451/src/libstd/sys/unix/process2.rs#L303-L308 Rust's solution is slightly different but is equally unperformant. Rust calls getdtablesize() which is a glibc library function that simply returns the current RLIMIT_NOFILE or OPEN_MAX values. Rust then goes on to call close() on each fd. That's obviously overkill for most tasks. Rarely, tasks - especially non-demons - hit RLIMIT_NOFILE or OPEN_MAX. Let's be nice and assume an unprivileged user with RLIMIT_NOFILE set to 1024. Even in this case, there's a very high chance that in the common case Rust is calling the close() syscall 1021 times pointlessly if the task just has 0, 1, and 2 open. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jann Horn <jannh@google.com> Cc: David Howells <dhowells@redhat.com> Cc: Dmitry V. Levin <ldv@altlinux.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Florian Weimer <fweimer@redhat.com> Cc: linux-api@vger.kernel.org --- v1: - Linus Torvalds <torvalds@linux-foundation.org>: - add cond_resched() to yield cpu when closing a lot of file descriptors - Al Viro <viro@zeniv.linux.org.uk>: - add cond_resched() to yield cpu when closing a lot of file descriptors --- arch/alpha/kernel/syscalls/syscall.tbl | 1 + arch/arm/tools/syscall.tbl | 1 + arch/arm64/include/asm/unistd32.h | 2 + arch/ia64/kernel/syscalls/syscall.tbl | 1 + arch/m68k/kernel/syscalls/syscall.tbl | 1 + arch/microblaze/kernel/syscalls/syscall.tbl | 1 + arch/mips/kernel/syscalls/syscall_n32.tbl | 1 + arch/mips/kernel/syscalls/syscall_n64.tbl | 1 + arch/mips/kernel/syscalls/syscall_o32.tbl | 1 + arch/parisc/kernel/syscalls/syscall.tbl | 1 + arch/powerpc/kernel/syscalls/syscall.tbl | 1 + arch/s390/kernel/syscalls/syscall.tbl | 1 + arch/sh/kernel/syscalls/syscall.tbl | 1 + arch/sparc/kernel/syscalls/syscall.tbl | 1 + arch/x86/entry/syscalls/syscall_32.tbl | 1 + arch/x86/entry/syscalls/syscall_64.tbl | 1 + arch/xtensa/kernel/syscalls/syscall.tbl | 1 + fs/file.c | 63 ++++++++++++++++++--- fs/open.c | 20 +++++++ include/linux/fdtable.h | 2 + include/linux/syscalls.h | 2 + include/uapi/asm-generic/unistd.h | 4 +- 22 files changed, 100 insertions(+), 9 deletions(-)