| Message ID | 20190527132200.17377-7-narmstrong@baylibre.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 954b67dfe6cdf446ba21d7f217dad6d450b5a964 |
| Headers | show |
| Series | arm64: meson-gx: misc fixes | expand |
On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote: > > Add HDMI nodes to support graphics on Vega S95 > > Suggested-by: Christian Hewitt <christianshewitt@gmail.com> > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> just like on all other boards, so: Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 760730d4e87b..6738b2aac9a0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -73,6 +73,17 @@ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>, @@ -108,6 +119,18 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>;
Add HDMI nodes to support graphics on Vega S95 Suggested-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+)