[v6,09/10] usb: roles: add USB Type-B GPIO connector driver

Message ID	1559115828-19146-10-git-send-email-chunfeng.yun@mediatek.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org> From: Chunfeng Yun <chunfeng.yun@mediatek.com> To: Rob Herring <robh+dt@kernel.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Heikki Krogerus <heikki.krogerus@linux.intel.com> Subject: [PATCH v6 09/10] usb: roles: add USB Type-B GPIO connector driver Date: Wed, 29 May 2019 15:43:47 +0800 Message-ID: <1559115828-19146-10-git-send-email-chunfeng.yun@mediatek.com> In-Reply-To: <1559115828-19146-1-git-send-email-chunfeng.yun@mediatek.com> References: <1559115828-19146-1-git-send-email-chunfeng.yun@mediatek.com> MIME-Version: 1.0 Precedence: list Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, Hans de Goede <hdegoede@redhat.com>, Badhri Jagan Sridharan <badhri@google.com>, Linus Walleij <linus.walleij@linaro.org>, linux-usb@vger.kernel.org, Yu Chen <chenyu56@huawei.com>, linux-kernel@vger.kernel.org, Biju Das <biju.das@bp.renesas.com>, Matthias Brugger <matthias.bgg@gmail.com>, Andy Shevchenko <andy.shevchenko@gmail.com>, linux-mediatek@lists.infradead.org, Min Guo <min.guo@mediatek.com>, Chunfeng Yun <chunfeng.yun@mediatek.com>, Adam Thomson <Adam.Thomson.Opensource@diasemi.com>, linux-arm-kernel@lists.infradead.org, Li Jun <jun.li@nxp.com> Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "Linux-mediatek" <linux-mediatek-bounces@lists.infradead.org> Errors-To: linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org
Series	add USB Type-B GPIO connector driver \| expand [v6,00/10] add USB Type-B GPIO connector driver [v6,01/10] dt-binding: usb: add usb-role-switch property [v6,02/10] dt-bindings: connector: add optional properties for Type-B [v6,03/10] dt-bindings: usb: add binding for Type-B GPIO connector driver [v6,04/10] dt-bindings: usb: mtu3: add properties about USB Role Switch [v6,05/10] usb: roles: Introduce stubs for the exiting functions in role.h. [v6,06/10] device connection: Add fwnode_connection_find_match() [v6,07/10] usb: roles: Add fwnode_usb_role_switch_get() function [v6,08/10] usb: roles: get usb-role-switch from parent [v6,09/10] usb: roles: add USB Type-B GPIO connector driver [v6,10/10] usb: mtu3: register a USB Role Switch for dual role mode

Tested-by: Nagarjuna Kristam <nkristam@nvidia.com> On 29-05-2019 13:13, Chunfeng Yun wrote: > Due to the requirement of usb-connector.txt binding, the old way > using extcon to support USB Dual-Role switch is now deprecated > when use Type-B connector. > This patch introduces a driver of Type-B connector which typically > uses an input GPIO to detect USB ID pin, and try to replace the > function provided by extcon-usb-gpio driver > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > --- > v6 changes: > 1. get usb-role-swtich by usb_role_switch_get() > > v5 changes: > 1. put usb_role_switch when error happens suggested by Biju > 2. don't treat bype-B connector as a virtual device suggested by Rob > > v4 changes: > 1. remove linux/gpio.h suggested by Linus > 2. put node when error happens > > v3 changes: > 1. treat bype-B connector as a virtual device; > 2. change file name again > > v2 changes: > 1. file name is changed > 2. use new compatible > --- > drivers/usb/roles/Kconfig | 11 ++ > drivers/usb/roles/Makefile | 1 + > drivers/usb/roles/typeb-conn-gpio.c | 286 ++++++++++++++++++++++++++++ > 3 files changed, 298 insertions(+) > create mode 100644 drivers/usb/roles/typeb-conn-gpio.c > > diff --git a/drivers/usb/roles/Kconfig b/drivers/usb/roles/Kconfig > index f8b31aa67526..d1156e18a81a 100644 > --- a/drivers/usb/roles/Kconfig > +++ b/drivers/usb/roles/Kconfig > @@ -26,4 +26,15 @@ config USB_ROLES_INTEL_XHCI > To compile the driver as a module, choose M here: the module will > be called intel-xhci-usb-role-switch. > > +config TYPEB_CONN_GPIO > + tristate "USB Type-B GPIO Connector" > + depends on GPIOLIB > + help > + The driver supports USB role switch between host and device via GPIO > + based USB cable detection, used typically if an input GPIO is used > + to detect USB ID pin. > + > + To compile the driver as a module, choose M here: the module will > + be called typeb-conn-gpio.ko > + > endif # USB_ROLE_SWITCH > diff --git a/drivers/usb/roles/Makefile b/drivers/usb/roles/Makefile > index 757a7d2797eb..5d5620d9d113 100644 > --- a/drivers/usb/roles/Makefile > +++ b/drivers/usb/roles/Makefile > @@ -3,3 +3,4 @@ > obj-$(CONFIG_USB_ROLE_SWITCH) += roles.o > roles-y := class.o > obj-$(CONFIG_USB_ROLES_INTEL_XHCI) += intel-xhci-usb-role-switch.o > +obj-$(CONFIG_TYPEB_CONN_GPIO) += typeb-conn-gpio.o > diff --git a/drivers/usb/roles/typeb-conn-gpio.c b/drivers/usb/roles/typeb-conn-gpio.c > new file mode 100644 > index 000000000000..c66f852365ef > --- /dev/null > +++ b/drivers/usb/roles/typeb-conn-gpio.c > @@ -0,0 +1,286 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * USB Type-B GPIO Connector Driver > + * > + * Copyright (C) 2019 MediaTek Inc. > + * > + * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> > + * > + * Some code borrowed from drivers/extcon/extcon-usb-gpio.c > + */ > + > +#include <linux/device.h> > +#include <linux/gpio/consumer.h> > +#include <linux/interrupt.h> > +#include <linux/irq.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/pinctrl/consumer.h> > +#include <linux/platform_device.h> > +#include <linux/regulator/consumer.h> > +#include <linux/usb/role.h> > + > +#define USB_GPIO_DEB_MS 20 /* ms */ > +#define USB_GPIO_DEB_US ((USB_GPIO_DEB_MS) * 1000) /* us */ > + > +#define USB_CONN_IRQF \ > + (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT) > + > +struct usb_conn_info { > + struct device *dev; > + struct usb_role_switch *role_sw; > + enum usb_role last_role; > + struct regulator *vbus; > + struct delayed_work dw_det; > + unsigned long debounce_jiffies; > + > + struct gpio_desc *id_gpiod; > + struct gpio_desc *vbus_gpiod; > + int id_irq; > + int vbus_irq; > +}; > + > +/** > + * "DEVICE" = VBUS and "HOST" = !ID, so we have: > + * Both "DEVICE" and "HOST" can't be set as active at the same time > + * so if "HOST" is active (i.e. ID is 0) we keep "DEVICE" inactive > + * even if VBUS is on. > + * > + * Role | ID | VBUS > + * ------------------------------------ > + * [1] DEVICE | H | H > + * [2] NONE | H | L > + * [3] HOST | L | H > + * [4] HOST | L | L > + * > + * In case we have only one of these signals: > + * - VBUS only - we want to distinguish between [1] and [2], so ID is always 1 > + * - ID only - we want to distinguish between [1] and [4], so VBUS = ID > + */ > +static void usb_conn_detect_cable(struct work_struct *work) > +{ > + struct usb_conn_info *info; > + enum usb_role role; > + int id, vbus, ret; > + > + info = container_of(to_delayed_work(work), > + struct usb_conn_info, dw_det); > + > + /* check ID and VBUS */ > + id = info->id_gpiod ? > + gpiod_get_value_cansleep(info->id_gpiod) : 1; > + vbus = info->vbus_gpiod ? > + gpiod_get_value_cansleep(info->vbus_gpiod) : id; > + > + if (!id) > + role = USB_ROLE_HOST; > + else if (vbus) > + role = USB_ROLE_DEVICE; > + else > + role = USB_ROLE_NONE; > + > + dev_dbg(info->dev, "role %d/%d, gpios: id %d, vbus %d\n", > + info->last_role, role, id, vbus); > + > + if (info->last_role == role) { > + dev_warn(info->dev, "repeated role: %d\n", role); > + return; > + } > + > + if (info->last_role == USB_ROLE_HOST) > + regulator_disable(info->vbus); > + > + ret = usb_role_switch_set_role(info->role_sw, role); > + if (ret) > + dev_err(info->dev, "failed to set role: %d\n", ret); > + > + if (role == USB_ROLE_HOST) { > + ret = regulator_enable(info->vbus); > + if (ret) > + dev_err(info->dev, "enable vbus regulator failed\n"); > + } > + > + info->last_role = role; > + > + dev_dbg(info->dev, "vbus regulator is %s\n", > + regulator_is_enabled(info->vbus) ? "enabled" : "disabled"); > +} > + > +static void usb_conn_queue_dwork(struct usb_conn_info *info, > + unsigned long delay) > +{ > + queue_delayed_work(system_power_efficient_wq, &info->dw_det, delay); > +} > + > +static irqreturn_t usb_conn_isr(int irq, void *dev_id) > +{ > + struct usb_conn_info *info = dev_id; > + > + usb_conn_queue_dwork(info, info->debounce_jiffies); > + > + return IRQ_HANDLED; > +} > + > +static int usb_conn_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct usb_conn_info *info; > + int ret = 0; > + > + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); > + if (!info) > + return -ENOMEM; > + > + info->dev = dev; > + info->id_gpiod = devm_gpiod_get_optional(dev, "id", GPIOD_IN); > + if (IS_ERR(info->id_gpiod)) > + return PTR_ERR(info->id_gpiod); > + > + info->vbus_gpiod = devm_gpiod_get_optional(dev, "vbus", GPIOD_IN); > + if (IS_ERR(info->vbus_gpiod)) > + return PTR_ERR(info->vbus_gpiod); > + > + if (!info->id_gpiod && !info->vbus_gpiod) { > + dev_err(dev, "failed to get gpios\n"); > + return -ENODEV; > + } > + > + if (info->id_gpiod) > + ret = gpiod_set_debounce(info->id_gpiod, USB_GPIO_DEB_US); > + if (!ret && info->vbus_gpiod) > + ret = gpiod_set_debounce(info->vbus_gpiod, USB_GPIO_DEB_US); > + if (ret < 0) > + info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEB_MS); > + > + INIT_DELAYED_WORK(&info->dw_det, usb_conn_detect_cable); > + > + info->vbus = devm_regulator_get(dev, "vbus"); > + if (IS_ERR(info->vbus)) { > + dev_err(dev, "failed to get vbus\n"); > + return PTR_ERR(info->vbus); > + } > + > + info->role_sw = usb_role_switch_get(dev); > + if (IS_ERR(info->role_sw)) { > + if (PTR_ERR(info->role_sw) != -EPROBE_DEFER) > + dev_err(dev, "failed to get role switch\n"); > + > + return PTR_ERR(info->role_sw); > + } > + > + if (info->id_gpiod) { > + info->id_irq = gpiod_to_irq(info->id_gpiod); > + if (info->id_irq < 0) { > + dev_err(dev, "failed to get ID IRQ\n"); > + ret = info->id_irq; > + goto put_role_sw; > + } > + > + ret = devm_request_threaded_irq(dev, info->id_irq, NULL, > + usb_conn_isr, USB_CONN_IRQF, > + pdev->name, info); > + if (ret < 0) { > + dev_err(dev, "failed to request ID IRQ\n"); > + goto put_role_sw; > + } > + } > + > + if (info->vbus_gpiod) { > + info->vbus_irq = gpiod_to_irq(info->vbus_gpiod); > + if (info->vbus_irq < 0) { > + dev_err(dev, "failed to get VBUS IRQ\n"); > + ret = info->vbus_irq; > + goto put_role_sw; > + } > + > + ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL, > + usb_conn_isr, USB_CONN_IRQF, > + pdev->name, info); > + if (ret < 0) { > + dev_err(dev, "failed to request VBUS IRQ\n"); > + goto put_role_sw; > + } > + } > + > + platform_set_drvdata(pdev, info); > + > + /* Perform initial detection */ > + usb_conn_queue_dwork(info, 0); > + > + return 0; > + > +put_role_sw: > + usb_role_switch_put(info->role_sw); > + return ret; > +} > + > +static int usb_conn_remove(struct platform_device *pdev) > +{ > + struct usb_conn_info *info = platform_get_drvdata(pdev); > + > + cancel_delayed_work_sync(&info->dw_det); > + > + if (info->last_role == USB_ROLE_HOST) > + regulator_disable(info->vbus); > + > + usb_role_switch_put(info->role_sw); > + > + return 0; > +} > + > +static int __maybe_unused usb_conn_suspend(struct device *dev) > +{ > + struct usb_conn_info *info = dev_get_drvdata(dev); > + > + if (info->id_gpiod) > + disable_irq(info->id_irq); > + if (info->vbus_gpiod) > + disable_irq(info->vbus_irq); > + > + pinctrl_pm_select_sleep_state(dev); > + > + return 0; > +} > + > +static int __maybe_unused usb_conn_resume(struct device *dev) > +{ > + struct usb_conn_info *info = dev_get_drvdata(dev); > + > + pinctrl_pm_select_default_state(dev); > + > + if (info->id_gpiod) > + enable_irq(info->id_irq); > + if (info->vbus_gpiod) > + enable_irq(info->vbus_irq); > + > + usb_conn_queue_dwork(info, 0); > + > + return 0; > +} > + > +static SIMPLE_DEV_PM_OPS(usb_conn_pm_ops, > + usb_conn_suspend, usb_conn_resume); > + > +#define DEV_PMS_OPS (IS_ENABLED(CONFIG_PM_SLEEP) ? &usb_conn_pm_ops : NULL) > + > +static const struct of_device_id usb_conn_dt_match[] = { > + { .compatible = "linux,typeb-conn-gpio", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, usb_conn_dt_match); > + > +static struct platform_driver usb_conn_driver = { > + .probe = usb_conn_probe, > + .remove = usb_conn_remove, > + .driver = { > + .name = "typeb-conn-gpio", > + .pm = DEV_PMS_OPS, > + .of_match_table = usb_conn_dt_match, > + }, > +}; > + > +module_platform_driver(usb_conn_driver); > + > +MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>"); > +MODULE_DESCRIPTION("USB Type-B GPIO connector driver"); > +MODULE_LICENSE("GPL v2"); >

diff --git a/drivers/usb/roles/Kconfig b/drivers/usb/roles/Kconfig index f8b31aa67526..d1156e18a81a 100644 --- a/drivers/usb/roles/Kconfig +++ b/drivers/usb/roles/Kconfig @@ -26,4 +26,15 @@ config USB_ROLES_INTEL_XHCI To compile the driver as a module, choose M here: the module will be called intel-xhci-usb-role-switch. +config TYPEB_CONN_GPIO + tristate "USB Type-B GPIO Connector" + depends on GPIOLIB + help + The driver supports USB role switch between host and device via GPIO + based USB cable detection, used typically if an input GPIO is used + to detect USB ID pin. + + To compile the driver as a module, choose M here: the module will + be called typeb-conn-gpio.ko + endif # USB_ROLE_SWITCH diff --git a/drivers/usb/roles/Makefile b/drivers/usb/roles/Makefile index 757a7d2797eb..5d5620d9d113 100644 --- a/drivers/usb/roles/Makefile +++ b/drivers/usb/roles/Makefile @@ -3,3 +3,4 @@ obj-$(CONFIG_USB_ROLE_SWITCH) += roles.o roles-y := class.o obj-$(CONFIG_USB_ROLES_INTEL_XHCI) += intel-xhci-usb-role-switch.o +obj-$(CONFIG_TYPEB_CONN_GPIO) += typeb-conn-gpio.o diff --git a/drivers/usb/roles/typeb-conn-gpio.c b/drivers/usb/roles/typeb-conn-gpio.c new file mode 100644 index 000000000000..c66f852365ef --- /dev/null +++ b/drivers/usb/roles/typeb-conn-gpio.c @@ -0,0 +1,286 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB Type-B GPIO Connector Driver + * + * Copyright (C) 2019 MediaTek Inc. + * + * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> + * + * Some code borrowed from drivers/extcon/extcon-usb-gpio.c + */ + +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/usb/role.h> + +#define USB_GPIO_DEB_MS 20 /* ms */ +#define USB_GPIO_DEB_US ((USB_GPIO_DEB_MS) * 1000) /* us */ + +#define USB_CONN_IRQF \ + (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT) + +struct usb_conn_info { + struct device *dev; + struct usb_role_switch *role_sw; + enum usb_role last_role; + struct regulator *vbus; + struct delayed_work dw_det; + unsigned long debounce_jiffies; + + struct gpio_desc *id_gpiod; + struct gpio_desc *vbus_gpiod; + int id_irq; + int vbus_irq; +}; + +/** + * "DEVICE" = VBUS and "HOST" = !ID, so we have: + * Both "DEVICE" and "HOST" can't be set as active at the same time + * so if "HOST" is active (i.e. ID is 0) we keep "DEVICE" inactive + * even if VBUS is on. + * + * Role | ID | VBUS + * ------------------------------------ + * [1] DEVICE | H | H + * [2] NONE | H | L + * [3] HOST | L | H + * [4] HOST | L | L + * + * In case we have only one of these signals: + * - VBUS only - we want to distinguish between [1] and [2], so ID is always 1 + * - ID only - we want to distinguish between [1] and [4], so VBUS = ID + */ +static void usb_conn_detect_cable(struct work_struct *work) +{ + struct usb_conn_info *info; + enum usb_role role; + int id, vbus, ret; + + info = container_of(to_delayed_work(work), + struct usb_conn_info, dw_det); + + /* check ID and VBUS */ + id = info->id_gpiod ? + gpiod_get_value_cansleep(info->id_gpiod) : 1; + vbus = info->vbus_gpiod ? + gpiod_get_value_cansleep(info->vbus_gpiod) : id; + + if (!id) + role = USB_ROLE_HOST; + else if (vbus) + role = USB_ROLE_DEVICE; + else + role = USB_ROLE_NONE; + + dev_dbg(info->dev, "role %d/%d, gpios: id %d, vbus %d\n", + info->last_role, role, id, vbus); + + if (info->last_role == role) { + dev_warn(info->dev, "repeated role: %d\n", role); + return; + } + + if (info->last_role == USB_ROLE_HOST) + regulator_disable(info->vbus); + + ret = usb_role_switch_set_role(info->role_sw, role); + if (ret) + dev_err(info->dev, "failed to set role: %d\n", ret); + + if (role == USB_ROLE_HOST) { + ret = regulator_enable(info->vbus); + if (ret) + dev_err(info->dev, "enable vbus regulator failed\n"); + } + + info->last_role = role; + + dev_dbg(info->dev, "vbus regulator is %s\n", + regulator_is_enabled(info->vbus) ? "enabled" : "disabled"); +} + +static void usb_conn_queue_dwork(struct usb_conn_info *info, + unsigned long delay) +{ + queue_delayed_work(system_power_efficient_wq, &info->dw_det, delay); +} + +static irqreturn_t usb_conn_isr(int irq, void *dev_id) +{ + struct usb_conn_info *info = dev_id; + + usb_conn_queue_dwork(info, info->debounce_jiffies); + + return IRQ_HANDLED; +} + +static int usb_conn_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct usb_conn_info *info; + int ret = 0; + + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->dev = dev; + info->id_gpiod = devm_gpiod_get_optional(dev, "id", GPIOD_IN); + if (IS_ERR(info->id_gpiod)) + return PTR_ERR(info->id_gpiod); + + info->vbus_gpiod = devm_gpiod_get_optional(dev, "vbus", GPIOD_IN); + if (IS_ERR(info->vbus_gpiod)) + return PTR_ERR(info->vbus_gpiod); + + if (!info->id_gpiod && !info->vbus_gpiod) { + dev_err(dev, "failed to get gpios\n"); + return -ENODEV; + } + + if (info->id_gpiod) + ret = gpiod_set_debounce(info->id_gpiod, USB_GPIO_DEB_US); + if (!ret && info->vbus_gpiod) + ret = gpiod_set_debounce(info->vbus_gpiod, USB_GPIO_DEB_US); + if (ret < 0) + info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEB_MS); + + INIT_DELAYED_WORK(&info->dw_det, usb_conn_detect_cable); + + info->vbus = devm_regulator_get(dev, "vbus"); + if (IS_ERR(info->vbus)) { + dev_err(dev, "failed to get vbus\n"); + return PTR_ERR(info->vbus); + } + + info->role_sw = usb_role_switch_get(dev); + if (IS_ERR(info->role_sw)) { + if (PTR_ERR(info->role_sw) != -EPROBE_DEFER) + dev_err(dev, "failed to get role switch\n"); + + return PTR_ERR(info->role_sw); + } + + if (info->id_gpiod) { + info->id_irq = gpiod_to_irq(info->id_gpiod); + if (info->id_irq < 0) { + dev_err(dev, "failed to get ID IRQ\n"); + ret = info->id_irq; + goto put_role_sw; + } + + ret = devm_request_threaded_irq(dev, info->id_irq, NULL, + usb_conn_isr, USB_CONN_IRQF, + pdev->name, info); + if (ret < 0) { + dev_err(dev, "failed to request ID IRQ\n"); + goto put_role_sw; + } + } + + if (info->vbus_gpiod) { + info->vbus_irq = gpiod_to_irq(info->vbus_gpiod); + if (info->vbus_irq < 0) { + dev_err(dev, "failed to get VBUS IRQ\n"); + ret = info->vbus_irq; + goto put_role_sw; + } + + ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL, + usb_conn_isr, USB_CONN_IRQF, + pdev->name, info); + if (ret < 0) { + dev_err(dev, "failed to request VBUS IRQ\n"); + goto put_role_sw; + } + } + + platform_set_drvdata(pdev, info); + + /* Perform initial detection */ + usb_conn_queue_dwork(info, 0); + + return 0; + +put_role_sw: + usb_role_switch_put(info->role_sw); + return ret; +} + +static int usb_conn_remove(struct platform_device *pdev) +{ + struct usb_conn_info *info = platform_get_drvdata(pdev); + + cancel_delayed_work_sync(&info->dw_det); + + if (info->last_role == USB_ROLE_HOST) + regulator_disable(info->vbus); + + usb_role_switch_put(info->role_sw); + + return 0; +} + +static int __maybe_unused usb_conn_suspend(struct device *dev) +{ + struct usb_conn_info *info = dev_get_drvdata(dev); + + if (info->id_gpiod) + disable_irq(info->id_irq); + if (info->vbus_gpiod) + disable_irq(info->vbus_irq); + + pinctrl_pm_select_sleep_state(dev); + + return 0; +} + +static int __maybe_unused usb_conn_resume(struct device *dev) +{ + struct usb_conn_info *info = dev_get_drvdata(dev); + + pinctrl_pm_select_default_state(dev); + + if (info->id_gpiod) + enable_irq(info->id_irq); + if (info->vbus_gpiod) + enable_irq(info->vbus_irq); + + usb_conn_queue_dwork(info, 0); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(usb_conn_pm_ops, + usb_conn_suspend, usb_conn_resume); + +#define DEV_PMS_OPS (IS_ENABLED(CONFIG_PM_SLEEP) ? &usb_conn_pm_ops : NULL) + +static const struct of_device_id usb_conn_dt_match[] = { + { .compatible = "linux,typeb-conn-gpio", }, + { } +}; +MODULE_DEVICE_TABLE(of, usb_conn_dt_match); + +static struct platform_driver usb_conn_driver = { + .probe = usb_conn_probe, + .remove = usb_conn_remove, + .driver = { + .name = "typeb-conn-gpio", + .pm = DEV_PMS_OPS, + .of_match_table = usb_conn_dt_match, + }, +}; + +module_platform_driver(usb_conn_driver); + +MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>"); +MODULE_DESCRIPTION("USB Type-B GPIO connector driver"); +MODULE_LICENSE("GPL v2");

[v6,09/10] usb: roles: add USB Type-B GPIO connector driver

Commit Message

Comments

Patch