| Message ID | 20190613185241.22800-3-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/sun4i: Allwinner R40 MIPI-DSI support | expand |
On Fri, Jun 14, 2019 at 2:53 AM Jagan Teki <jagan@amarulasolutions.com> wrote: > > TCON LCD0, LCD1 in allwinner R40, are used for managing > LCD interfaces like RGB, LVDS and DSI. > > Like TCON TV0, TV1 these LCD0, LCD1 are also managed via > tcon top. > > Add support for it, in tcon driver. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
On Fri, Jun 14, 2019 at 11:19 AM Chen-Yu Tsai <wens@csie.org> wrote: > > On Fri, Jun 14, 2019 at 2:53 AM Jagan Teki <jagan@amarulasolutions.com> wrote: > > > > TCON LCD0, LCD1 in allwinner R40, are used for managing > > LCD interfaces like RGB, LVDS and DSI. > > > > Like TCON TV0, TV1 these LCD0, LCD1 are also managed via > > tcon top. > > > > Add support for it, in tcon driver. > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > Reviewed-by: Chen-Yu Tsai <wens@csie.org> I take that back. The TCON output muxing (which selects whether TCON LCD or TCON TV outputs to the GPIO pins) is not supported yet. Please at least add TODO notes, or ideally, block RGB output from being used. ChenYu
On Fri, Jun 14, 2019 at 9:05 AM Chen-Yu Tsai <wens@csie.org> wrote: > > On Fri, Jun 14, 2019 at 11:19 AM Chen-Yu Tsai <wens@csie.org> wrote: > > > > On Fri, Jun 14, 2019 at 2:53 AM Jagan Teki <jagan@amarulasolutions.com> wrote: > > > > > > TCON LCD0, LCD1 in allwinner R40, are used for managing > > > LCD interfaces like RGB, LVDS and DSI. > > > > > > Like TCON TV0, TV1 these LCD0, LCD1 are also managed via > > > tcon top. > > > > > > Add support for it, in tcon driver. > > > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > > Reviewed-by: Chen-Yu Tsai <wens@csie.org> > > I take that back. > > The TCON output muxing (which selects whether TCON LCD or TCON TV > outputs to the GPIO pins) > is not supported yet. Please at least add TODO notes, or ideally, Are you referring about port selection? it is support in sun8i_tcon_top_de_config.
On Fri, Jun 14, 2019 at 6:56 PM Jagan Teki <jagan@amarulasolutions.com> wrote: > > On Fri, Jun 14, 2019 at 9:05 AM Chen-Yu Tsai <wens@csie.org> wrote: > > > > On Fri, Jun 14, 2019 at 11:19 AM Chen-Yu Tsai <wens@csie.org> wrote: > > > > > > On Fri, Jun 14, 2019 at 2:53 AM Jagan Teki <jagan@amarulasolutions.com> wrote: > > > > > > > > TCON LCD0, LCD1 in allwinner R40, are used for managing > > > > LCD interfaces like RGB, LVDS and DSI. > > > > > > > > Like TCON TV0, TV1 these LCD0, LCD1 are also managed via > > > > tcon top. > > > > > > > > Add support for it, in tcon driver. > > > > > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > > > > Reviewed-by: Chen-Yu Tsai <wens@csie.org> > > > > I take that back. > > > > The TCON output muxing (which selects whether TCON LCD or TCON TV > > outputs to the GPIO pins) > > is not supported yet. Please at least add TODO notes, or ideally, > > Are you referring about port selection? it is support in > sun8i_tcon_top_de_config. No. That's supported as you already pointed out. That only selects which mixer outputs to which TCON. I'm talking about the GPIOD and GPIOH bits, which select which of LCD or TV TCON outputs to the LCD function pins. Keep in mind that the TV TCON's H/V SYNC signals are used in combination with the TV encoder RGB outputs for VGA. ChenYu
On Fri, Jun 14, 2019 at 4:32 PM Chen-Yu Tsai <wens@csie.org> wrote: > > On Fri, Jun 14, 2019 at 6:56 PM Jagan Teki <jagan@amarulasolutions.com> wrote: > > > > On Fri, Jun 14, 2019 at 9:05 AM Chen-Yu Tsai <wens@csie.org> wrote: > > > > > > On Fri, Jun 14, 2019 at 11:19 AM Chen-Yu Tsai <wens@csie.org> wrote: > > > > > > > > On Fri, Jun 14, 2019 at 2:53 AM Jagan Teki <jagan@amarulasolutions.com> wrote: > > > > > > > > > > TCON LCD0, LCD1 in allwinner R40, are used for managing > > > > > LCD interfaces like RGB, LVDS and DSI. > > > > > > > > > > Like TCON TV0, TV1 these LCD0, LCD1 are also managed via > > > > > tcon top. > > > > > > > > > > Add support for it, in tcon driver. > > > > > > > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > > > > > > Reviewed-by: Chen-Yu Tsai <wens@csie.org> > > > > > > I take that back. > > > > > > The TCON output muxing (which selects whether TCON LCD or TCON TV > > > outputs to the GPIO pins) > > > is not supported yet. Please at least add TODO notes, or ideally, > > > > Are you referring about port selection? it is support in > > sun8i_tcon_top_de_config. > > No. That's supported as you already pointed out. That only selects > which mixer outputs to which TCON. > > I'm talking about the GPIOD and GPIOH bits, which select which of > LCD or TV TCON outputs to the LCD function pins. Keep in mind that > the TV TCON's H/V SYNC signals are used in combination with the > TV encoder RGB outputs for VGA. Got it, so do I need to add TODO on sun8i_r40_lcd_quirks struct?
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 9e9d08ee8387..8553066e7bed 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -1471,6 +1471,12 @@ static const struct sun4i_tcon_quirks sun8i_a83t_tv_quirks = { .has_channel_1 = true, }; +static const struct sun4i_tcon_quirks sun8i_r40_lcd_quirks = { + .supports_lvds = true, + .has_channel_0 = true, + .set_mux = sun8i_r40_tcon_tv_set_mux, +}; + static const struct sun4i_tcon_quirks sun8i_r40_tv_quirks = { .has_channel_1 = true, .set_mux = sun8i_r40_tcon_tv_set_mux, @@ -1501,6 +1507,7 @@ const struct of_device_id sun4i_tcon_of_table[] = { { .compatible = "allwinner,sun8i-a33-tcon", .data = &sun8i_a33_quirks }, { .compatible = "allwinner,sun8i-a83t-tcon-lcd", .data = &sun8i_a83t_lcd_quirks }, { .compatible = "allwinner,sun8i-a83t-tcon-tv", .data = &sun8i_a83t_tv_quirks }, + { .compatible = "allwinner,sun8i-r40-tcon-lcd", .data = &sun8i_r40_lcd_quirks }, { .compatible = "allwinner,sun8i-r40-tcon-tv", .data = &sun8i_r40_tv_quirks }, { .compatible = "allwinner,sun8i-v3s-tcon", .data = &sun8i_v3s_quirks }, { .compatible = "allwinner,sun9i-a80-tcon-lcd", .data = &sun9i_a80_tcon_lcd_quirks },
TCON LCD0, LCD1 in allwinner R40, are used for managing LCD interfaces like RGB, LVDS and DSI. Like TCON TV0, TV1 these LCD0, LCD1 are also managed via tcon top. Add support for it, in tcon driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 7 +++++++ 1 file changed, 7 insertions(+)