| Message ID | 20190612085349.21243-12-bibby.hsieh@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | support gce on mt8183 platform | expand |
On Wed, Jun 12, 2019 at 4:53 PM Bibby Hsieh <bibby.hsieh@mediatek.com> wrote: > > GCE cannot know the register base address, this function > can help cmdq client to get the cmdq_client_reg structure. > > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> > --- > drivers/soc/mediatek/mtk-cmdq-helper.c | 24 ++++++++++++++++++++++++ > include/linux/soc/mediatek/mtk-cmdq.h | 20 ++++++++++++++++++++ > 2 files changed, 44 insertions(+) > > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c > index 70ad4d806fac..fac4d33fd520 100644 > --- a/drivers/soc/mediatek/mtk-cmdq-helper.c > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c > @@ -27,6 +27,30 @@ struct cmdq_instruction { > u8 op; > }; > > +int cmdq_dev_get_client_reg(struct device *dev, > + struct cmdq_client_reg *client_reg, int idx) > +{ > + struct of_phandle_args spec; > + > + if (!client_reg) > + return -EINVAL; > + > + if (of_parse_phandle_with_args(dev->of_node, "mediatek,gce-client-reg", > + "#subsys-cells", idx, &spec)) { > + dev_err(dev, "can't parse gce-client-reg property (%d)", idx); > + > + return -EINVAL; > + } > + > + client_reg->subsys = spec.args[0]; > + client_reg->offset = spec.args[1]; > + client_reg->size = spec.args[2]; > + of_node_put(spec.np); > + > + return 0; > +} > +EXPORT_SYMBOL(cmdq_dev_get_client_reg); > + > static void cmdq_client_timeout(struct timer_list *t) > { > struct cmdq_client *client = from_timer(client, t, timer); > diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h > index a345870a6d10..2e2a2274c231 100644 > --- a/include/linux/soc/mediatek/mtk-cmdq.h > +++ b/include/linux/soc/mediatek/mtk-cmdq.h > @@ -15,6 +15,12 @@ > > struct cmdq_pkt; > > +struct cmdq_client_reg { > + u8 subsys; > + u16 offset; > + u16 size; > +}; > + > struct cmdq_client { > spinlock_t lock; > u32 pkt_cnt; > @@ -142,4 +148,18 @@ int cmdq_pkt_flush_async(struct cmdq_pkt *pkt, cmdq_async_flush_cb cb, > */ > int cmdq_pkt_flush(struct cmdq_pkt *pkt); > > +/** > + * cmdq_dev_get_client_reg() - parse cmdq client reg from the device node of CMDQ client Minor nit: this line is over 80 chars. > + * @dev: device of CMDQ mailbox clienti > + * @client_reg: CMDQ client reg pointer > + * @idx: the index of desired reg > + * > + * Return: 0 for success; else the error code is returned > + * > + * Help CMDQ client pasing the cmdq client reg > + * from the device node of CMDQ client. > + */ > +int cmdq_dev_get_client_reg(struct device *dev, > + struct cmdq_client_reg *client_reg, int idx); > + > #endif /* __MTK_CMDQ_H__ */ > -- > 2.18.0 >
Hi, Bibby: On Wed, 2019-06-12 at 16:53 +0800, Bibby Hsieh wrote: > GCE cannot know the register base address, this function > can help cmdq client to get the cmdq_client_reg structure. > > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> > --- > drivers/soc/mediatek/mtk-cmdq-helper.c | 24 ++++++++++++++++++++++++ > include/linux/soc/mediatek/mtk-cmdq.h | 20 ++++++++++++++++++++ > 2 files changed, 44 insertions(+) > > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c > index 70ad4d806fac..fac4d33fd520 100644 > --- a/drivers/soc/mediatek/mtk-cmdq-helper.c > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c > @@ -27,6 +27,30 @@ struct cmdq_instruction { > u8 op; > }; > > +int cmdq_dev_get_client_reg(struct device *dev, > + struct cmdq_client_reg *client_reg, int idx) > +{ > + struct of_phandle_args spec; > + > + if (!client_reg) > + return -EINVAL; > + > + if (of_parse_phandle_with_args(dev->of_node, "mediatek,gce-client-reg", > + "#subsys-cells", idx, &spec)) { > + dev_err(dev, "can't parse gce-client-reg property (%d)", idx); > + > + return -EINVAL; of_parse_phandle_with_args() may return -ENOENT, why do you change it to -EINVAL? Regards, CK > + } > + > + client_reg->subsys = spec.args[0]; > + client_reg->offset = spec.args[1]; > + client_reg->size = spec.args[2]; > + of_node_put(spec.np); > + > + return 0; > +} > +EXPORT_SYMBOL(cmdq_dev_get_client_reg); > + > static void cmdq_client_timeout(struct timer_list *t) > { > struct cmdq_client *client = from_timer(client, t, timer); > diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h > index a345870a6d10..2e2a2274c231 100644 > --- a/include/linux/soc/mediatek/mtk-cmdq.h > +++ b/include/linux/soc/mediatek/mtk-cmdq.h > @@ -15,6 +15,12 @@ > > struct cmdq_pkt; > > +struct cmdq_client_reg { > + u8 subsys; > + u16 offset; > + u16 size; > +}; > + > struct cmdq_client { > spinlock_t lock; > u32 pkt_cnt; > @@ -142,4 +148,18 @@ int cmdq_pkt_flush_async(struct cmdq_pkt *pkt, cmdq_async_flush_cb cb, > */ > int cmdq_pkt_flush(struct cmdq_pkt *pkt); > > +/** > + * cmdq_dev_get_client_reg() - parse cmdq client reg from the device node of CMDQ client > + * @dev: device of CMDQ mailbox clienti > + * @client_reg: CMDQ client reg pointer > + * @idx: the index of desired reg > + * > + * Return: 0 for success; else the error code is returned > + * > + * Help CMDQ client pasing the cmdq client reg > + * from the device node of CMDQ client. > + */ > +int cmdq_dev_get_client_reg(struct device *dev, > + struct cmdq_client_reg *client_reg, int idx); > + > #endif /* __MTK_CMDQ_H__ */
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c index 70ad4d806fac..fac4d33fd520 100644 --- a/drivers/soc/mediatek/mtk-cmdq-helper.c +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c @@ -27,6 +27,30 @@ struct cmdq_instruction { u8 op; }; +int cmdq_dev_get_client_reg(struct device *dev, + struct cmdq_client_reg *client_reg, int idx) +{ + struct of_phandle_args spec; + + if (!client_reg) + return -EINVAL; + + if (of_parse_phandle_with_args(dev->of_node, "mediatek,gce-client-reg", + "#subsys-cells", idx, &spec)) { + dev_err(dev, "can't parse gce-client-reg property (%d)", idx); + + return -EINVAL; + } + + client_reg->subsys = spec.args[0]; + client_reg->offset = spec.args[1]; + client_reg->size = spec.args[2]; + of_node_put(spec.np); + + return 0; +} +EXPORT_SYMBOL(cmdq_dev_get_client_reg); + static void cmdq_client_timeout(struct timer_list *t) { struct cmdq_client *client = from_timer(client, t, timer); diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h index a345870a6d10..2e2a2274c231 100644 --- a/include/linux/soc/mediatek/mtk-cmdq.h +++ b/include/linux/soc/mediatek/mtk-cmdq.h @@ -15,6 +15,12 @@ struct cmdq_pkt; +struct cmdq_client_reg { + u8 subsys; + u16 offset; + u16 size; +}; + struct cmdq_client { spinlock_t lock; u32 pkt_cnt; @@ -142,4 +148,18 @@ int cmdq_pkt_flush_async(struct cmdq_pkt *pkt, cmdq_async_flush_cb cb, */ int cmdq_pkt_flush(struct cmdq_pkt *pkt); +/** + * cmdq_dev_get_client_reg() - parse cmdq client reg from the device node of CMDQ client + * @dev: device of CMDQ mailbox clienti + * @client_reg: CMDQ client reg pointer + * @idx: the index of desired reg + * + * Return: 0 for success; else the error code is returned + * + * Help CMDQ client pasing the cmdq client reg + * from the device node of CMDQ client. + */ +int cmdq_dev_get_client_reg(struct device *dev, + struct cmdq_client_reg *client_reg, int idx); + #endif /* __MTK_CMDQ_H__ */
GCE cannot know the register base address, this function can help cmdq client to get the cmdq_client_reg structure. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> --- drivers/soc/mediatek/mtk-cmdq-helper.c | 24 ++++++++++++++++++++++++ include/linux/soc/mediatek/mtk-cmdq.h | 20 ++++++++++++++++++++ 2 files changed, 44 insertions(+)