@@ -1,6 +1,6 @@
rfkill - radio frequency (RF) connector kill switch support
-For details to this subsystem look at Documentation/rfkill.rst.
+For details to this subsystem look at Documentation/driver-api/rfkill.rst.
What: /sys/class/rfkill/rfkill[0-9]+/claim
Date: 09-Jul-2007
@@ -1,6 +1,6 @@
rfkill - radio frequency (RF) connector kill switch support
-For details to this subsystem look at Documentation/rfkill.rst.
+For details to this subsystem look at Documentation/driver-api/rfkill.rst.
For the deprecated /sys/class/rfkill/*/claim knobs of this interface look in
Documentation/ABI/removed/sysfs-class-rfkill.
@@ -1,6 +1,6 @@
switchtec - Microsemi Switchtec PCI Switch Management Endpoint
-For details on this subsystem look at Documentation/switchtec.rst.
+For details on this subsystem look at Documentation/driver-api/switchtec.rst.
What: /sys/class/switchtec
Date: 05-Jan-2017
@@ -239,7 +239,7 @@ from the PCI device config space. Use the values in the pci_dev structure
as the PCI "bus address" might have been remapped to a "host physical"
address by the arch/chip-set specific kernel support.
-See Documentation/io-mapping.rst for how to access device registers
+See Documentation/driver-api/io-mapping.rst for how to access device registers
or device memory.
The device driver needs to call pci_request_region() to verify
@@ -268,7 +268,7 @@ Guest mitigation mechanisms
/proc/irq/$NR/smp_affinity[_list] files. Limited documentation is
available at:
- https://www.kernel.org/doc/Documentation/IRQ-affinity.rst
+ https://www.kernel.org/doc/Documentation/driver-api/irq-affinity.rst
.. _smt_control:
@@ -930,7 +930,7 @@
edid/1680x1050.bin, or edid/1920x1080.bin is given
and no file with the same name exists. Details and
instructions how to build your own EDID data are
- available in Documentation/EDID/howto.rst. An EDID
+ available in Documentation/driver-api/edid.rst. An EDID
data set will only be used for a particular connector,
if its name and a colon are prepended to the EDID
name. Each connector may use a unique EDID data
@@ -3162,7 +3162,7 @@
See Documentation/sysctl/vm.rst for details.
ohci1394_dma=early [HW] enable debugging via the ohci1394 driver.
- See Documentation/debugging-via-ohci1394.rst for more
+ See Documentation/driver-api/debugging-via-ohci1394.rst for more
info.
olpc_ec_timeout= [OLPC] ms delay when issuing EC commands
@@ -10,7 +10,7 @@ them to a "housekeeping" CPU dedicated to such work.
References
==========
-- Documentation/IRQ-affinity.rst: Binding interrupts to sets of CPUs.
+- Documentation/driver-api/irq-affinity.rst: Binding interrupts to sets of CPUs.
- Documentation/admin-guide/cgroup-v1: Using cgroups to bind tasks to sets of CPUs.
similarity index 99%
rename from Documentation/atomic_bitops.rst
rename to Documentation/driver-api/atomic_bitops.rst
@@ -1,5 +1,3 @@
-:orphan:
-
=============
Atomic bitops
=============
similarity index 99%
rename from Documentation/bt8xxgpio.rst
rename to Documentation/driver-api/bt8xxgpio.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===================================================================
A driver for a selfmade cheap BT8xx based PCI GPIO-card (bt8xxgpio)
===================================================================
similarity index 99%
rename from Documentation/bus-virt-phys-mapping.rst
rename to Documentation/driver-api/bus-virt-phys-mapping.rst
@@ -1,5 +1,3 @@
-:orphan:
-
==========================================================
How to access I/O mapped memory from within device drivers
==========================================================
similarity index 99%
rename from Documentation/connector/connector.rst
rename to Documentation/driver-api/connector.rst
@@ -1,5 +1,3 @@
-:orphan:
-
================
Kernel Connector
================
similarity index 99%
rename from Documentation/console/console.rst
rename to Documentation/driver-api/console.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===============
Console Drivers
===============
similarity index 99%
rename from Documentation/crc32.rst
rename to Documentation/driver-api/crc32.rst
@@ -1,5 +1,3 @@
-:orphan:
-
=================================
brief tutorial on CRC computation
=================================
similarity index 99%
rename from Documentation/dcdbas.rst
rename to Documentation/driver-api/dcdbas.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===================================
Dell Systems Management Base Driver
===================================
similarity index 98%
rename from Documentation/debugging-modules.rst
rename to Documentation/driver-api/debugging-modules.rst
@@ -1,5 +1,3 @@
-:orphan:
-
Debugging Modules after 2.6.3
-----------------------------
similarity index 99%
rename from Documentation/debugging-via-ohci1394.rst
rename to Documentation/driver-api/debugging-via-ohci1394.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===========================================================================
Using physical DMA provided by OHCI-1394 FireWire controllers for debugging
===========================================================================
similarity index 99%
rename from Documentation/dell_rbu.rst
rename to Documentation/driver-api/dell_rbu.rst
@@ -1,5 +1,3 @@
-:orphan:
-
=============================================================
Usage of the new open sourced rbu (Remote BIOS Update) driver
=============================================================
similarity index 99%
rename from Documentation/digsig.rst
rename to Documentation/driver-api/digsig.rst
@@ -1,5 +1,3 @@
-:orphan:
-
==================================
Digital Signature Verification API
==================================
similarity index 99%
rename from Documentation/EDID/howto.rst
rename to Documentation/driver-api/edid.rst
@@ -1,5 +1,3 @@
-:orphan:
-
====
EDID
====
similarity index 99%
rename from Documentation/eisa.rst
rename to Documentation/driver-api/eisa.rst
@@ -1,5 +1,3 @@
-:orphan:
-
================
EISA bus support
================
similarity index 99%
rename from Documentation/futex-requeue-pi.rst
rename to Documentation/driver-api/futex-requeue-pi.rst
@@ -1,5 +1,3 @@
-:orphan:
-
================
Futex Requeue PI
================
similarity index 99%
rename from Documentation/gcc-plugins.rst
rename to Documentation/driver-api/gcc-plugins.rst
@@ -1,5 +1,3 @@
-:orphan:
-
=========================
GCC plugin infrastructure
=========================
similarity index 99%
rename from Documentation/hwspinlock.rst
rename to Documentation/driver-api/hwspinlock.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===========================
Hardware Spinlock Framework
===========================
@@ -60,6 +60,72 @@ available subsections can be seen below.
acpi/index
generic-counter
+ atomic_bitops
+ bt8xxgpio
+ bus-virt-phys-mapping
+ connector
+ console
+ crc32
+ dcdbas
+ debugging-modules
+ debugging-via-ohci1394
+ dell_rbu
+ digsig
+ edid
+ eisa
+ futex-requeue-pi
+ gcc-plugins
+ hwspinlock
+ io-mapping
+ io_ordering
+ ipmi
+ irq
+ irq-affinity
+ irq-domain
+ irqflags-tracing
+ isa
+ isapnp
+ kobject
+ kprobes
+ kref
+ lightnvm-pblk
+ lzo
+ mailbox
+ men-chameleon-bus
+ nommu-mmap
+ ntb
+ nvmem
+ padata
+ parport-lowlevel
+ percpu-rw-semaphore
+ pi-futex
+ pps
+ preempt-locking
+ pti_intel_mid
+ ptp
+ pwm
+ rbtree
+ remoteproc
+ rfkill
+ robust-futex-ABI
+ robust-futexes
+ rpmsg
+ sgi-ioc4
+ sm501
+ smsc_ece1099
+ speculation
+ static-keys
+ switchtec
+ sync_file
+ tee
+ this_cpu_ops
+ unaligned-memory-access
+ vfio
+ vfio-mediated-device
+ xillybus
+ xz
+ zorro
+
.. only:: subproject and html
Indices
similarity index 99%
rename from Documentation/io-mapping.rst
rename to Documentation/driver-api/io-mapping.rst
@@ -1,5 +1,3 @@
-:orphan:
-
========================
The io_mapping functions
========================
similarity index 99%
rename from Documentation/io_ordering.rst
rename to Documentation/driver-api/io_ordering.rst
@@ -1,5 +1,3 @@
-:orphan:
-
==============================================
Ordering I/O writes to memory-mapped addresses
==============================================
similarity index 99%
rename from Documentation/IPMI.rst
rename to Documentation/driver-api/ipmi.rst
@@ -1,5 +1,3 @@
-:orphan:
-
=====================
The Linux IPMI Driver
=====================
similarity index 99%
rename from Documentation/IRQ-affinity.rst
rename to Documentation/driver-api/irq-affinity.rst
@@ -1,5 +1,3 @@
-:orphan:
-
================
SMP IRQ affinity
================
similarity index 99%
rename from Documentation/IRQ-domain.rst
rename to Documentation/driver-api/irq-domain.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===============================================
The irq_domain interrupt number mapping library
===============================================
similarity index 99%
rename from Documentation/IRQ.rst
rename to Documentation/driver-api/irq.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===============
What is an IRQ?
===============
similarity index 99%
rename from Documentation/irqflags-tracing.rst
rename to Documentation/driver-api/irqflags-tracing.rst
@@ -1,5 +1,3 @@
-:orphan:
-
=======================
IRQ-flags state tracing
=======================
similarity index 99%
rename from Documentation/isa.rst
rename to Documentation/driver-api/isa.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===========
ISA Drivers
===========
similarity index 98%
rename from Documentation/isapnp.rst
rename to Documentation/driver-api/isapnp.rst
@@ -1,5 +1,3 @@
-:orphan:
-
==========================================================
ISA Plug & Play support by Jaroslav Kysela <perex@suse.cz>
==========================================================
similarity index 99%
rename from Documentation/kobject.rst
rename to Documentation/driver-api/kobject.rst
@@ -1,5 +1,3 @@
-:orphan:
-
=====================================================================
Everything you never wanted to know about kobjects, ksets, and ktypes
=====================================================================
@@ -212,7 +210,7 @@ statically and will warn the developer of this improper usage.
If all that you want to use a kobject for is to provide a reference counter
for your structure, please use the struct kref instead; a kobject would be
overkill. For more information on how to use struct kref, please see the
-file Documentation/kref.rst in the Linux kernel source tree.
+file Documentation/driver-api/kref.rst in the Linux kernel source tree.
Creating "simple" kobjects
similarity index 99%
rename from Documentation/kprobes.rst
rename to Documentation/driver-api/kprobes.rst
@@ -1,5 +1,3 @@
-:orphan:
-
=======================
Kernel Probes (Kprobes)
=======================
similarity index 99%
rename from Documentation/kref.rst
rename to Documentation/driver-api/kref.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===================================================
Adding reference counters (krefs) to kernel objects
===================================================
similarity index 100%
rename from Documentation/lightnvm/pblk.txt
rename to Documentation/driver-api/lightnvm-pblk.rst
similarity index 99%
rename from Documentation/lzo.rst
rename to Documentation/driver-api/lzo.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===========================================================
LZO stream format as understood by Linux's LZO decompressor
===========================================================
similarity index 99%
rename from Documentation/mailbox.rst
rename to Documentation/driver-api/mailbox.rst
@@ -1,5 +1,3 @@
-:orphan:
-
============================
The Common Mailbox Framework
============================
similarity index 99%
rename from Documentation/men-chameleon-bus.rst
rename to Documentation/driver-api/men-chameleon-bus.rst
@@ -1,5 +1,3 @@
-:orphan:
-
=================
MEN Chameleon Bus
=================
similarity index 99%
rename from Documentation/nommu-mmap.rst
rename to Documentation/driver-api/nommu-mmap.rst
@@ -1,5 +1,3 @@
-:orphan:
-
=============================
No-MMU memory mapping support
=============================
similarity index 99%
rename from Documentation/ntb.rst
rename to Documentation/driver-api/ntb.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===========
NTB Drivers
===========
similarity index 99%
rename from Documentation/nvmem/nvmem.rst
rename to Documentation/driver-api/nvmem.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===============
NVMEM Subsystem
===============
similarity index 99%
rename from Documentation/padata.rst
rename to Documentation/driver-api/padata.rst
@@ -1,5 +1,3 @@
-:orphan:
-
=======================================
The padata parallel execution mechanism
=======================================
similarity index 99%
rename from Documentation/parport-lowlevel.rst
rename to Documentation/driver-api/parport-lowlevel.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===============================
PARPORT interface documentation
===============================
similarity index 99%
rename from Documentation/percpu-rw-semaphore.rst
rename to Documentation/driver-api/percpu-rw-semaphore.rst
@@ -1,5 +1,3 @@
-:orphan:
-
====================
Percpu rw semaphores
====================
similarity index 99%
rename from Documentation/pi-futex.rst
rename to Documentation/driver-api/pi-futex.rst
@@ -1,5 +1,3 @@
-:orphan:
-
======================
Lightweight PI-futexes
======================
@@ -1,5 +1,3 @@
-:orphan:
-
======================
PPS - Pulse Per Second
======================
similarity index 99%
rename from Documentation/preempt-locking.rst
rename to Documentation/driver-api/preempt-locking.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===========================================================================
Proper Locking Under a Preemptible Kernel: Keeping Kernel Code Preempt-Safe
===========================================================================
similarity index 99%
rename from Documentation/pti/pti_intel_mid.rst
rename to Documentation/driver-api/pti_intel_mid.rst
@@ -1,5 +1,3 @@
-:orphan:
-
=============
Intel MID PTI
=============
@@ -1,5 +1,3 @@
-:orphan:
-
===========================================
PTP hardware clock infrastructure for Linux
===========================================
similarity index 99%
rename from Documentation/pwm.rst
rename to Documentation/driver-api/pwm.rst
@@ -1,5 +1,3 @@
-:orphan:
-
======================================
Pulse Width Modulation (PWM) interface
======================================
similarity index 99%
rename from Documentation/rbtree.rst
rename to Documentation/driver-api/rbtree.rst
@@ -1,5 +1,3 @@
-:orphan:
-
=================================
Red-black Trees (rbtree) in Linux
=================================
similarity index 99%
rename from Documentation/remoteproc.rst
rename to Documentation/driver-api/remoteproc.rst
@@ -1,5 +1,3 @@
-:orphan:
-
==========================
Remote Processor Framework
==========================
@@ -24,7 +22,7 @@ for remote processors that supports this kind of communication. This way,
platform-specific remoteproc drivers only need to provide a few low-level
handlers, and then all rpmsg drivers will then just work
(for more information about the virtio-based rpmsg bus and its drivers,
-please read Documentation/rpmsg.rst).
+please read Documentation/driver-api/rpmsg.rst).
Registration of other types of virtio devices is now also possible. Firmwares
just need to publish what kind of virtio devices do they support, and then
remoteproc will add those devices. This makes it possible to reuse the
similarity index 99%
rename from Documentation/rfkill.rst
rename to Documentation/driver-api/rfkill.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===============================
rfkill - RF kill switch support
===============================
similarity index 99%
rename from Documentation/robust-futex-ABI.rst
rename to Documentation/driver-api/robust-futex-ABI.rst
@@ -1,5 +1,3 @@
-:orphan:
-
====================
The robust futex ABI
====================
similarity index 99%
rename from Documentation/robust-futexes.rst
rename to Documentation/driver-api/robust-futexes.rst
@@ -1,5 +1,3 @@
-:orphan:
-
========================================
A description of what robust futexes are
========================================
similarity index 99%
rename from Documentation/rpmsg.rst
rename to Documentation/driver-api/rpmsg.rst
@@ -1,5 +1,3 @@
-:orphan:
-
============================================
Remote Processor Messaging (rpmsg) Framework
============================================
similarity index 99%
rename from Documentation/sgi-ioc4.rst
rename to Documentation/driver-api/sgi-ioc4.rst
@@ -1,5 +1,3 @@
-:orphan:
-
====================================
SGI IOC4 PCI (multi function) device
====================================
similarity index 99%
rename from Documentation/SM501.rst
rename to Documentation/driver-api/sm501.rst
@@ -1,5 +1,3 @@
-:orphan:
-
.. include:: <isonum.txt>
============
similarity index 99%
rename from Documentation/smsc_ece1099.rst
rename to Documentation/driver-api/smsc_ece1099.rst
@@ -1,5 +1,3 @@
-:orphan:
-
=================================================
Msc Keyboard Scan Expansion/GPIO Expansion device
=================================================
similarity index 99%
rename from Documentation/speculation.rst
rename to Documentation/driver-api/speculation.rst
@@ -1,12 +1,10 @@
-:orphan:
+===========
+Speculation
+===========
This document explains potential effects of speculation, and how undesirable
effects can be mitigated portably using common APIs.
-===========
-Speculation
-===========
-
To improve performance and minimize average latencies, many contemporary CPUs
employ speculative execution techniques such as branch prediction, performing
work which may be discarded at a later stage.
similarity index 99%
rename from Documentation/static-keys.rst
rename to Documentation/driver-api/static-keys.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===========
Static Keys
===========
similarity index 97%
rename from Documentation/switchtec.rst
rename to Documentation/driver-api/switchtec.rst
@@ -1,5 +1,3 @@
-:orphan:
-
========================
Linux Switchtec Support
========================
@@ -99,6 +97,6 @@ the following configuration settings:
NT EP BAR 2 will be dynamically configured as a Direct Window, and
the configuration file does not need to configure it explicitly.
-Please refer to Documentation/ntb.rst in Linux source tree for an overall
+Please refer to Documentation/driver-api/ntb.rst in Linux source tree for an overall
understanding of the Linux NTB stack. ntb_hw_switchtec works as an NTB
Hardware Driver in this stack.
similarity index 99%
rename from Documentation/sync_file.rst
rename to Documentation/driver-api/sync_file.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===================
Sync File API Guide
===================
similarity index 99%
rename from Documentation/tee.rst
rename to Documentation/driver-api/tee.rst
@@ -1,5 +1,3 @@
-:orphan:
-
=============
TEE subsystem
=============
similarity index 99%
rename from Documentation/this_cpu_ops.rst
rename to Documentation/driver-api/this_cpu_ops.rst
@@ -1,5 +1,3 @@
-:orphan:
-
===================
this_cpu operations
===================
similarity index 99%
rename from Documentation/unaligned-memory-access.rst
rename to Documentation/driver-api/unaligned-memory-access.rst
@@ -1,5 +1,3 @@
-:orphan:
-
=========================
Unaligned Memory Accesses
=========================
similarity index 99%
rename from Documentation/vfio-mediated-device.rst
rename to Documentation/driver-api/vfio-mediated-device.rst
@@ -1,5 +1,3 @@
-:orphan:
-
.. include:: <isonum.txt>
=====================
@@ -410,7 +408,7 @@ card.
References
==========
-1. See Documentation/vfio.rst for more information on VFIO.
+1. See Documentation/driver-api/vfio.rst for more information on VFIO.
2. struct mdev_driver in include/linux/mdev.h
3. struct mdev_parent_ops in include/linux/mdev.h
4. struct vfio_iommu_driver_ops in include/linux/vfio.h
similarity index 99%
rename from Documentation/vfio.rst
rename to Documentation/driver-api/vfio.rst
@@ -1,5 +1,3 @@
-:orphan:
-
==================================
VFIO - "Virtual Function I/O" [1]_
==================================
similarity index 99%
rename from Documentation/xillybus.rst
rename to Documentation/driver-api/xillybus.rst
@@ -1,5 +1,3 @@
-:orphan:
-
==========================================
Xillybus driver for generic FPGA interface
==========================================
similarity index 99%
rename from Documentation/xz.rst
rename to Documentation/driver-api/xz.rst
@@ -1,5 +1,3 @@
-:orphan:
-
============================
XZ data compression in Linux
============================
similarity index 99%
rename from Documentation/zorro.rst
rename to Documentation/driver-api/zorro.rst
@@ -1,5 +1,3 @@
-:orphan:
-
========================================
Writing Device Drivers for Zorro Devices
========================================
@@ -53,7 +53,7 @@ Attributes of devices can be exported by a device driver through sysfs.
Please see Documentation/filesystems/sysfs.txt for more information
on how sysfs works.
-As explained in Documentation/kobject.rst, device attributes must be
+As explained in Documentation/driver-api/kobject.rst, device attributes must be
created before the KOBJ_ADD uevent is generated. The only way to realize
that is by defining an attribute group.
@@ -187,7 +187,7 @@ the hardware. Thus, in a VGA console::
Assuming the VGA driver can be unloaded, one must first unbind the VGA driver
from the console layer before unloading the driver. The VGA driver cannot be
unloaded if it is still bound to the console layer. (See
-Documentation/console/console.rst for more information).
+Documentation/driver-api/console.rst for more information).
This is more complicated in the case of the framebuffer console (fbcon),
because fbcon is an intermediate layer between the console and the drivers::
@@ -204,7 +204,7 @@ fbcon. Thus, there is no need to explicitly unbind the fbdev drivers from
fbcon.
So, how do we unbind fbcon from the console? Part of the answer is in
-Documentation/console/console.rst. To summarize:
+Documentation/driver-api/console.rst. To summarize:
Echo a value to the bind file that represents the framebuffer console
driver. So assuming vtcon1 represents fbcon, then::
@@ -16,7 +16,7 @@ a means to export kernel data structures, their attributes, and the
linkages between them to userspace.
sysfs is tied inherently to the kobject infrastructure. Please read
-Documentation/kobject.rst for more information concerning the kobject
+Documentation/driver-api/kobject.rst for more information concerning the kobject
interface.
@@ -320,7 +320,7 @@ struct :c:type:`struct file_operations <file_operations>` get_unmapped_area
field with a pointer on :c:func:`drm_gem_cma_get_unmapped_area`.
More detailed information about get_unmapped_area can be found in
-Documentation/nommu-mmap.rst
+Documentation/driver-api/nommu-mmap.rst
Memory Coherency
----------------
@@ -7,7 +7,7 @@ IRQ affinity on IA64 platforms
By writing to /proc/irq/IRQ#/smp_affinity the interrupt routing can be
controlled. The behavior on IA64 platforms is slightly different from
-that described in Documentation/IRQ-affinity.rst for i386 systems.
+that described in Documentation/driver-api/irq-affinity.rst for i386 systems.
Because of the usage of SAPIC mode and physical destination mode the
IRQ target is one particular CPU and cannot be a mask of several
@@ -643,7 +643,7 @@ Sysfs notes
2010.
rfkill controller switch "tpacpi_bluetooth_sw": refer to
- Documentation/rfkill.rst for details.
+ Documentation/driver-api/rfkill.rst for details.
Video output control -- /proc/acpi/ibm/video
@@ -1406,7 +1406,7 @@ Sysfs notes
2010.
rfkill controller switch "tpacpi_wwan_sw": refer to
- Documentation/rfkill.rst for details.
+ Documentation/driver-api/rfkill.rst for details.
EXPERIMENTAL: UWB
@@ -1426,7 +1426,7 @@ Sysfs notes
^^^^^^^^^^^
rfkill controller switch "tpacpi_uwb_sw": refer to
- Documentation/rfkill.rst for details.
+ Documentation/driver-api/rfkill.rst for details.
Adaptive keyboard
-----------------
@@ -4,7 +4,7 @@ RT-mutex subsystem with PI support
RT-mutexes with priority inheritance are used to support PI-futexes,
which enable pthread_mutex_t priority inheritance attributes
-(PTHREAD_PRIO_INHERIT). [See Documentation/pi-futex.rst for more details
+(PTHREAD_PRIO_INHERIT). [See Documentation/driver-api/pi-futex.rst for more details
about PI-futexes.]
This technology was developed in the -rt tree and streamlined for
@@ -81,7 +81,7 @@ of queues to IRQs can be determined from /proc/interrupts. By default,
an IRQ may be handled on any CPU. Because a non-negligible part of packet
processing takes place in receive interrupt handling, it is advantageous
to spread receive interrupts between CPUs. To manually adjust the IRQ
-affinity of each interrupt see Documentation/IRQ-affinity.rst. Some systems
+affinity of each interrupt see Documentation/driver-api/irq-affinity.rst. Some systems
will be running irqbalance, a daemon that dynamically optimizes IRQ
assignments and as a result may override any manual settings.
@@ -160,7 +160,7 @@ can be configured for each receive queue using a sysfs file entry::
This file implements a bitmap of CPUs. RPS is disabled when it is zero
(the default), in which case packets are processed on the interrupting
-CPU. Documentation/IRQ-affinity.rst explains how CPUs are assigned to
+CPU. Documentation/driver-api/irq-affinity.rst explains how CPUs are assigned to
the bitmap.
@@ -38,7 +38,7 @@ every detail. More information/reference could be found here:
qemu/hw/s390x/css.c
For vfio mediated device framework:
-- Documentation/vfio-mediated-device.rst
+- Documentation/driver-api/vfio-mediated-device.rst
Motivation of vfio-ccw
----------------------
@@ -322,5 +322,5 @@ Reference
2. ESA/390 Common I/O Device Commands manual (IBM Form. No. SA22-7204)
3. https://en.wikipedia.org/wiki/Channel_I/O
4. Documentation/s390/cds.rst
-5. Documentation/vfio.rst
-6. Documentation/vfio-mediated-device.rst
+5. Documentation/driver-api/vfio.rst
+6. Documentation/driver-api/vfio-mediated-device.rst
@@ -50,7 +50,7 @@ show up in /proc/sys/kernel:
- kexec_load_disabled
- kptr_restrict
- l2cr [ PPC only ]
-- modprobe ==> Documentation/debugging-modules.rst
+- modprobe ==> Documentation/driver-api/debugging-modules.rst
- modules_disabled
- msg_next_id [ sysv ipc ]
- msgmax
@@ -580,7 +580,7 @@ trimming of allocations is initiated.
The default value is 1.
-See Documentation/nommu-mmap.rst for more information.
+See Documentation/driver-api/nommu-mmap.rst for more information.
numa_zonelist_order
@@ -40,7 +40,7 @@ Synopsis of kprobe_events
MEMADDR : Address where the probe is inserted.
MAXACTIVE : Maximum number of instances of the specified function that
can be probed simultaneously, or 0 for the default value
- as defined in Documentation/kprobes.rst section 1.3.1.
+ as defined in Documentation/driver-api/kprobes.rst section 1.3.1.
FETCHARGS : Arguments. Each probe can have up to 128 args.
%REG : Fetch register REG
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/IRQ.rst
+Chinese translated version of Documentation/driver-api/irq.rst
If you have any comment or update to the content, please contact the
original document maintainer directly. However, if you have a problem
@@ -9,7 +9,7 @@ or if there is a problem with the translation.
Maintainer: Eric W. Biederman <ebiederman@xmission.com>
Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
---------------------------------------------------------------------
-Documentation/IRQ.rst 的中文翻译
+Documentation/driver-api/irq.rst 的中文翻译
如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
@@ -40,7 +40,7 @@ sysfs 是一个最初基于 ramfs 且位于内存的文件系统。它提供导
数据结构及其属性，以及它们之间的关联到用户空间的方法。
sysfs 始终与 kobject 的底层结构紧密相关。请阅读
-Documentation/kobject.rst 文档以获得更多关于 kobject 接口的
+Documentation/driver-api/kobject.rst 文档以获得更多关于 kobject 接口的
信息。
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/io_ordering.rst
+Chinese translated version of Documentation/driver-api/io_ordering.rst
If you have any comment or update to the content, please contact the
original document maintainer directly. However, if you have a problem
@@ -8,7 +8,7 @@ or if there is a problem with the translation.
Chinese maintainer: Lin Yongting <linyongting@gmail.com>
---------------------------------------------------------------------
-Documentation/io_ordering.rst 的中文翻译
+Documentation/driver-api/io_ordering.rst 的中文翻译
如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
@@ -183,7 +183,7 @@ acknowledge number is set to seq+1.
Additional documantion, source code examples.
============================================
-1. Documentation/connector
+1. Documentation/driver-api/connector.rst
2. http://www.ioremap.net/archive/w1
This archive includes userspace application w1d.c which uses
read/write/search commands for all master/slave devices found on the bus.
@@ -44,7 +44,7 @@ Last reviewed: 08/20/2018
NOTE:
More information about watchdog drivers in general, including the ioctl
interface to /dev/watchdog can be found in
- Documentation/watchdog/watchdog-api.rst and Documentation/IPMI.rst.
+ Documentation/watchdog/watchdog-api.rst and Documentation/driver-api/ipmi.rst.
Due to limitations in the iLO hardware, the NMI pretimeout if enabled,
can only be set to 9 seconds. Attempts to set pretimeout to other
@@ -4588,7 +4588,7 @@ DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
M: Stuart Hayes <stuart.w.hayes@gmail.com>
L: platform-driver-x86@vger.kernel.org
S: Maintained
-F: Documentation/dcdbas.rst
+F: Documentation/driver-api/dcdbas.rst
F: drivers/platform/x86/dcdbas.*
DELL WMI NOTIFICATIONS DRIVER
@@ -4966,7 +4966,7 @@ M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
R: "Rafael J. Wysocki" <rafael@kernel.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
S: Supported
-F: Documentation/kobject.rst
+F: Documentation/driver-api/kobject.rst
F: drivers/base/
F: fs/debugfs/
F: fs/sysfs/
@@ -6584,7 +6584,7 @@ F: include/linux/futex.h
F: include/uapi/linux/futex.h
F: tools/testing/selftests/futex/
F: tools/perf/bench/futex*
-F: Documentation/*futex*
+F: Documentation/driver-api/*futex*
GCC PLUGINS
M: Kees Cook <keescook@chromium.org>
@@ -6594,7 +6594,7 @@ S: Maintained
F: scripts/gcc-plugins/
F: scripts/gcc-plugin.sh
F: scripts/Makefile.gcc-plugins
-F: Documentation/gcc-plugins.rst
+F: Documentation/driver-api/gcc-plugins.rst
GASKET DRIVER FRAMEWORK
M: Rob Springer <rspringer@google.com>
@@ -7022,7 +7022,7 @@ L: linux-remoteproc@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock.git
F: Documentation/devicetree/bindings/hwlock/
-F: Documentation/hwspinlock.rst
+F: Documentation/driver-api/hwspinlock.rst
F: drivers/hwspinlock/
F: include/linux/hwspinlock.h
@@ -8292,7 +8292,7 @@ L: openipmi-developer@lists.sourceforge.net (moderated for non-subscribers)
W: http://openipmi.sourceforge.net/
S: Supported
F: Documentation/devicetree/bindings/ipmi/
-F: Documentation/IPMI.rst
+F: Documentation/driver-api/ipmi.rst
F: drivers/char/ipmi/
F: include/linux/ipmi*
F: include/uapi/linux/ipmi*
@@ -8333,7 +8333,7 @@ IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
M: Marc Zyngier <marc.zyngier@arm.com>
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
-F: Documentation/IRQ-domain.rst
+F: Documentation/driver-api/irq-domain.rst
F: include/linux/irqdomain.h
F: kernel/irq/irqdomain.c
F: kernel/irq/msi.c
@@ -8358,7 +8358,7 @@ F: drivers/irqchip/
ISA
M: William Breathitt Gray <vilhelm.gray@gmail.com>
S: Maintained
-F: Documentation/isa.rst
+F: Documentation/driver-api/isa.rst
F: drivers/base/isa.c
F: include/linux/isa.h
@@ -8373,7 +8373,7 @@ F: drivers/media/radio/radio-isa*
ISAPNP
M: Jaroslav Kysela <perex@perex.cz>
S: Maintained
-F: Documentation/isapnp.rst
+F: Documentation/driver-api/isapnp.rst
F: drivers/pnp/isapnp/
F: include/linux/isapnp.h
@@ -8823,7 +8823,7 @@ M: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
M: "David S. Miller" <davem@davemloft.net>
M: Masami Hiramatsu <mhiramat@kernel.org>
S: Maintained
-F: Documentation/kprobes.rst
+F: Documentation/driver-api/kprobes.rst
F: include/linux/kprobes.h
F: include/asm-generic/kprobes.h
F: kernel/kprobes.c
@@ -9182,7 +9182,7 @@ L: linux-arch@vger.kernel.org
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev
F: tools/memory-model/
-F: Documentation/atomic_bitops.rst
+F: Documentation/driver-api/atomic_bitops.rst
F: Documentation/atomic_t.txt
F: Documentation/core-api/atomic_ops.rst
F: Documentation/core-api/refcount-vs-atomic.rst
@@ -10240,7 +10240,7 @@ M: Johannes Thumshirn <morbidrsa@gmail.com>
S: Maintained
F: drivers/mcb/
F: include/linux/mcb.h
-F: Documentation/men-chameleon-bus.rst
+F: Documentation/driver-api/men-chameleon-bus.rst
MEN F21BMC (Board Management Controller)
M: Andreas Werner <andreas.werner@men.de>
@@ -11923,7 +11923,7 @@ L: linux-crypto@vger.kernel.org
S: Maintained
F: kernel/padata.c
F: include/linux/padata.h
-F: Documentation/padata.rst
+F: Documentation/driver-api/padata.rst
PANASONIC LAPTOP ACPI EXTRAS DRIVER
M: Harald Welte <laforge@gnumonks.org>
@@ -11947,7 +11947,7 @@ F: drivers/parport/
F: include/linux/parport*.h
F: drivers/char/ppdev.c
F: include/uapi/linux/ppdev.h
-F: Documentation/parport*.rst
+F: Documentation/driver-api/parport*.rst
PARAVIRT_OPS INTERFACE
M: Juergen Gross <jgross@suse.com>
@@ -12122,7 +12122,7 @@ M: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
M: Logan Gunthorpe <logang@deltatee.com>
L: linux-pci@vger.kernel.org
S: Maintained
-F: Documentation/switchtec.rst
+F: Documentation/driver-api/switchtec.rst
F: Documentation/ABI/testing/sysfs-class-switchtec
F: drivers/pci/switch/switchtec*
F: include/uapi/linux/switchtec_ioctl.h
@@ -12884,7 +12884,7 @@ M: Thierry Reding <thierry.reding@gmail.com>
L: linux-pwm@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm.git
-F: Documentation/pwm.rst
+F: Documentation/driver-api/pwm.rst
F: Documentation/devicetree/bindings/pwm/
F: include/linux/pwm.h
F: drivers/pwm/
@@ -13405,7 +13405,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc.git
S: Maintained
F: Documentation/devicetree/bindings/remoteproc/
F: Documentation/ABI/testing/sysfs-class-remoteproc
-F: Documentation/remoteproc.rst
+F: Documentation/driver-api/remoteproc.rst
F: drivers/remoteproc/
F: include/linux/remoteproc.h
F: include/linux/remoteproc/
@@ -13417,7 +13417,7 @@ L: linux-remoteproc@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg.git
S: Maintained
F: drivers/rpmsg/
-F: Documentation/rpmsg.rst
+F: Documentation/driver-api/rpmsg.rst
F: Documentation/ABI/testing/sysfs-bus-rpmsg
F: include/linux/rpmsg.h
F: include/linux/rpmsg/
@@ -13503,7 +13503,7 @@ W: http://wireless.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
-F: Documentation/rfkill.rst
+F: Documentation/driver-api/rfkill.rst
F: Documentation/ABI/stable/sysfs-class-rfkill
F: net/rfkill/
F: include/linux/rfkill.h
@@ -15211,7 +15211,7 @@ F: drivers/dma-buf/dma-fence*
F: drivers/dma-buf/sw_sync.c
F: include/linux/sync_file.h
F: include/uapi/linux/sync_file.h
-F: Documentation/sync_file.rst
+F: Documentation/driver-api/sync_file.rst
T: git git://anongit.freedesktop.org/drm/drm-misc
SYNOPSYS ARC ARCHITECTURE
@@ -15537,7 +15537,7 @@ S: Maintained
F: include/linux/tee_drv.h
F: include/uapi/linux/tee.h
F: drivers/tee/
-F: Documentation/tee.rst
+F: Documentation/driver-api/tee.rst
TEGRA ARCHITECTURE SUPPORT
M: Thierry Reding <thierry.reding@gmail.com>
@@ -16706,7 +16706,7 @@ R: Cornelia Huck <cohuck@redhat.com>
L: kvm@vger.kernel.org
T: git git://github.com/awilliam/linux-vfio.git
S: Maintained
-F: Documentation/vfio.rst
+F: Documentation/driver-api/vfio.rst
F: drivers/vfio/
F: include/linux/vfio.h
F: include/uapi/linux/vfio.h
@@ -16715,7 +16715,7 @@ VFIO MEDIATED DEVICE DRIVERS
M: Kirti Wankhede <kwankhede@nvidia.com>
L: kvm@vger.kernel.org
S: Maintained
-F: Documentation/vfio-mediated-device.rst
+F: Documentation/driver-api/vfio-mediated-device.rst
F: drivers/vfio/mdev/
F: include/linux/mdev.h
F: samples/vfio-mdev/
@@ -141,7 +141,7 @@ config HAVE_64BIT_ALIGNED_ACCESS
accesses are required to be 64 bit aligned in this way even
though it is not a 64 bit architecture.
- See Documentation/unaligned-memory-access.rst for more
+ See Documentation/driver-api/unaligned-memory-access.rst for more
information on the topic of unaligned memory accesses.
config HAVE_EFFICIENT_UNALIGNED_ACCESS
@@ -160,7 +160,7 @@ config HAVE_EFFICIENT_UNALIGNED_ACCESS
problems with received packets if doing so would not help
much.
- See Documentation/unaligned-memory-access.rst for more
+ See Documentation/driver-api/unaligned-memory-access.rst for more
information on the topic of unaligned memory accesses.
config ARCH_USE_BUILTIN_BSWAP
@@ -31,7 +31,7 @@ extern void __uc32_iounmap(volatile void __iomem *addr);
* ioremap and friends.
*
* ioremap takes a PCI memory address, as specified in
- * Documentation/io-mapping.rst.
+ * Documentation/driver-api/io-mapping.rst.
*
*/
#define ioremap(cookie, size) __uc32_ioremap(cookie, size)
@@ -1063,7 +1063,7 @@ static void device_release(struct kobject *kobj)
else if (dev->class && dev->class->dev_release)
dev->class->dev_release(dev);
else
- WARN(1, KERN_ERR "Device '%s' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.rst.\n",
+ WARN(1, KERN_ERR "Device '%s' does not have a release() function, it is broken and must be fixed. See Documentation/driver-api/kobject.rst.\n",
dev_name(dev));
kfree(p);
}
@@ -14,7 +14,7 @@ menuconfig IPMI_HANDLER
IPMI is a standard for managing sensors (temperature,
voltage, etc.) in a system.
- See <file:Documentation/IPMI.rst> for more details on the driver.
+ See <file:Documentation/driver-api/ipmi.rst> for more details on the driver.
If unsure, say N.
@@ -18,7 +18,7 @@ static int hotmod_handler(const char *val, const struct kernel_param *kp);
module_param_call(hotmod, hotmod_handler, NULL, NULL, 0200);
MODULE_PARM_DESC(hotmod, "Add and remove interfaces. See"
- " Documentation/IPMI.rst in the kernel sources for the"
+ " Documentation/driver-api/ipmi.rst in the kernel sources for the"
" gory details.");
/*
@@ -977,7 +977,7 @@ static inline int ipmi_thread_busy_wait(enum si_sm_result smi_result,
* that are not BT and do not have interrupts. It starts spinning
* when an operation is complete or until max_busy tells it to stop
* (if that is enabled). See the paragraph on kimid_max_busy_us in
- * Documentation/IPMI.rst for details.
+ * Documentation/driver-api/ipmi.rst for details.
*/
static int ipmi_thread(void *data)
{
@@ -15,7 +15,7 @@ config SYNC_FILE
associated with a buffer. When a job is submitted to the GPU a fence
is attached to the buffer and is transferred via userspace, using Sync
Files fds, to the DRM driver for example. More details at
- Documentation/sync_file.rst.
+ Documentation/driver-api/sync_file.rst.
config SW_SYNC
bool "Sync File Validation Framework"
@@ -1300,7 +1300,7 @@ config GPIO_BT8XX
The card needs to be physically altered for using it as a
GPIO card. For more information on how to build a GPIO card
from a BT8xx TV card, see the documentation file at
- Documentation/bt8xxgpio.rst
+ Documentation/driver-api/bt8xxgpio.rst
If unsure, say N.
@@ -141,7 +141,7 @@ config DRM_LOAD_EDID_FIRMWARE
monitor are unable to provide appropriate EDID data. Since this
feature is provided as a workaround for broken hardware, the
default case is N. Details and instructions how to build your own
- EDID data are given in Documentation/EDID/howto.rst.
+ EDID data are given in Documentation/driver-api/edid.rst.
config DRM_DP_CEC
bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support"
@@ -9,7 +9,7 @@ config PCI_SW_SWITCHTEC
Enables support for the management interface for the MicroSemi
Switchtec series of PCIe switches. Supports userspace access
to submit MRPC commands to the switch via /dev/switchtecX
- devices. See <file:Documentation/switchtec.rst> for more
+ devices. See <file:Documentation/driver-api/switchtec.rst> for more
information.
endmenu
@@ -118,7 +118,7 @@ config DCDBAS
Interrupts (SMIs) and Host Control Actions (system power cycle or
power off after OS shutdown) on certain Dell systems.
- See <file:Documentation/dcdbas.rst> for more details on the driver
+ See <file:Documentation/driver-api/dcdbas.rst> for more details on the driver
and the Dell systems on which Dell systems management software makes
use of this driver.
@@ -259,7 +259,7 @@ config DELL_RBU
DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)
supporting application to communicate with the BIOS regarding the new
image for the image update to take effect.
- See <file:Documentation/dell_rbu.rst> for more details on the driver.
+ See <file:Documentation/driver-api/dell_rbu.rst> for more details on the driver.
config FUJITSU_LAPTOP
@@ -7,7 +7,7 @@
* and Host Control Actions (power cycle or power off after OS shutdown) on
* Dell systems.
*
- * See Documentation/dcdbas.rst for more information.
+ * See Documentation/driver-api/dcdbas.rst for more information.
*
* Copyright (C) 1995-2006 Dell Inc.
*/
@@ -24,7 +24,7 @@
* on every time the packet data is written. This driver requires an
* application to break the BIOS image in to fixed sized packet chunks.
*
- * See Documentation/dell_rbu.rst for more info.
+ * See Documentation/driver-api/dell_rbu.rst for more info.
*/
#include <linux/init.h>
#include <linux/module.h>
@@ -7,6 +7,6 @@ config ISAPNP
depends on ISA || COMPILE_TEST
help
Say Y here if you would like support for ISA Plug and Play devices.
- Some information is in <file:Documentation/isapnp.rst>.
+ Some information is in <file:Documentation/driver-api/isapnp.rst>.
If unsure, say Y.
@@ -93,7 +93,7 @@ config VT_HW_CONSOLE_BINDING
select the console driver that will serve as the backend for the
virtual terminals.
- See <file:Documentation/console/console.rst> for more
+ See <file:Documentation/driver-api/console.rst> for more
information. For framebuffer console users, please refer to
<file:Documentation/fb/fbcon.rst>.
@@ -25,7 +25,7 @@ menuconfig VFIO
select VFIO_IOMMU_TYPE1 if (X86 || S390 || ARM || ARM64)
help
VFIO provides a framework for secure userspace device drivers.
- See Documentation/vfio.rst for more details.
+ See Documentation/driver-api/vfio.rst for more details.
If you don't know what to do here, say N.
@@ -6,7 +6,7 @@ config VFIO_MDEV
default n
help
Provides a framework to virtualize devices.
- See Documentation/vfio-mediated-device.rst for more details.
+ See Documentation/driver-api/vfio-mediated-device.rst for more details.
If you don't know what do here, say N.
@@ -19,7 +19,7 @@ config W1_CON
default y
---help---
This allows to communicate with userspace using connector. For more
- information see <file:Documentation/connector/connector.rst>.
+ information see <file:Documentation/driver-api/connector.rst>.
There are three types of messages between w1 core and userspace:
1. Events. They are generated each time new master or slave device found
either due to automatic or requested search.
@@ -8,7 +8,7 @@
/*
* Implementation of atomic bitops using atomic-fetch ops.
- * See Documentation/atomic_bitops.rst for details.
+ * See Documentation/driver-api/atomic_bitops.rst for details.
*/
static inline void set_bit(unsigned int nr, volatile unsigned long *p)
@@ -28,7 +28,7 @@
* The io_mapping mechanism provides an abstraction for mapping
* individual pages from an io device to the CPU in an efficient fashion.
*
- * See Documentation/io-mapping.rst
+ * See Documentation/driver-api/io-mapping.rst
*/
struct io_mapping {
@@ -68,7 +68,7 @@
* Lacking toolchain and or architecture support, static keys fall back to a
* simple conditional branch.
*
- * Additional babbling in: Documentation/static-keys.rst
+ * Additional babbling in: Documentation/driver-api/static-keys.rst
*/
#ifndef __ASSEMBLY__
@@ -7,7 +7,7 @@
* Copyright (c) 2006-2008 Greg Kroah-Hartman <greg@kroah.com>
* Copyright (c) 2006-2008 Novell Inc.
*
- * Please read Documentation/kobject.rst before using the kobject
+ * Please read Documentation/driver-api/kobject.rst before using the kobject
* interface, ESPECIALLY the parts about reference counts and object
* destructors.
*/
@@ -8,7 +8,7 @@
*
* Split from kobject.h by David Howells (dhowells@redhat.com)
*
- * Please read Documentation/kobject.rst before using the kobject
+ * Please read Documentation/driver-api/kobject.rst before using the kobject
* interface, ESPECIALLY the parts about reference counts and object
* destructors.
*/
@@ -11,7 +11,7 @@
I know it's not the cleaner way, but in C (not in C++) to get
performances and genericity...
- See Documentation/rbtree.rst for documentation and samples.
+ See Documentation/driver-api/rbtree.rst for documentation and samples.
*/
#ifndef _LINUX_RBTREE_H
@@ -21,7 +21,7 @@
* rb_insert_augmented() and rb_erase_augmented() are intended to be public.
* The rest are implementation details you are not expected to depend on.
*
- * See Documentation/rbtree.rst for documentation and samples.
+ * See Documentation/driver-api/rbtree.rst for documentation and samples.
*/
struct rb_augment_callbacks {
@@ -1807,7 +1807,7 @@ config MMAP_ALLOW_UNINITIALIZED
userspace. Since that isn't generally a problem on no-MMU systems,
it is normally safe to say Y here.
- See Documentation/nommu-mmap.rst for more information.
+ See Documentation/driver-api/nommu-mmap.rst for more information.
config SYSTEM_DATA_VERIFICATION
def_bool n
@@ -2,7 +2,7 @@
/*
* padata.c - generic interface to process data streams in parallel
*
- * See Documentation/padata.rst for an api documentation.
+ * See Documentation/driver-api/padata.rst for an api documentation.
*
* Copyright (C) 2008, 2009 secunet Security Networks AG
* Copyright (C) 2008, 2009 Steffen Klassert <steffen.klassert@secunet.com>
@@ -420,7 +420,7 @@ config INTERVAL_TREE
See:
- Documentation/rbtree.rst
+ Documentation/driver-api/rbtree.rst
for more information.
@@ -1682,7 +1682,7 @@ config PROVIDE_OHCI1394_DMA_INIT
This code (~1k) is freed after boot. By then, the firewire stack
in charge of the OHCI-1394 controllers should be used instead.
- See Documentation/debugging-via-ohci1394.rst for more information.
+ See Documentation/driver-api/debugging-via-ohci1394.rst for more information.
menuconfig RUNTIME_TESTING_MENU
bool "Runtime Testing"
@@ -24,7 +24,7 @@
* Version 2. See the file COPYING for more details.
*/
-/* see: Documentation/crc32.rst for a description of algorithms */
+/* see: Documentation/driver-api/crc32.rst for a description of algorithms */
#include <linux/crc32.h>
#include <linux/crc32poly.h>
@@ -6,7 +6,7 @@
* Copyright (c) 2006-2007 Greg Kroah-Hartman <greg@kroah.com>
* Copyright (c) 2006-2007 Novell Inc.
*
- * Please see the file Documentation/kobject.rst for critical information
+ * Please see the file Documentation/driver-api/kobject.rst for critical information
* about using the kobject interface.
*/
@@ -668,7 +668,7 @@ static void kobject_cleanup(struct kobject *kobj)
kobject_name(kobj), kobj, __func__, kobj->parent);
if (t && !t->release)
- pr_debug("kobject: '%s' (%p): does not have a release() function, it is broken and must be fixed. See Documentation/kobject.rst.\n",
+ pr_debug("kobject: '%s' (%p): does not have a release() function, it is broken and must be fixed. See Documentation/driver-api/kobject.rst.\n",
kobject_name(kobj), kobj);
/* send "remove" if the caller did not do it but sent "add" */
@@ -32,7 +32,7 @@
* depending on the base count. Since the base count is taken from a u8
* and a few bits, it is safe to assume that it will always be lower than
* or equal to 2*255, thus we can always prevent any overflow by accepting
- * two less 255 steps. See Documentation/lzo.rst for more information.
+ * two less 255 steps. See Documentation/driver-api/lzo.rst for more information.
*/
#define MAX_255_COUNT ((((size_t)~0) / 255) - 2)
@@ -5,7 +5,7 @@ config XZ_DEC
help
LZMA2 compression algorithm and BCJ filters are supported using
the .xz file format as the container. For integrity checking,
- CRC32 is supported. See Documentation/xz.rst for more information.
+ CRC32 is supported. See Documentation/driver-api/xz.rst for more information.
if XZ_DEC
@@ -369,7 +369,7 @@ config NOMMU_INITIAL_TRIM_EXCESS
This option specifies the initial value of this option. The default
of 1 says that all excess pages should be trimmed.
- See Documentation/nommu-mmap.rst for more information.
+ See Documentation/driver-api/nommu-mmap.rst for more information.
config TRANSPARENT_HUGEPAGE
bool "Transparent Hugepage Support"
@@ -5,7 +5,7 @@
* Replacement code for mm functions to support CPU's that don't
* have any form of memory management unit (thus no virtual memory).
*
- * See Documentation/nommu-mmap.rst
+ * See Documentation/driver-api/nommu-mmap.rst
*
* Copyright (c) 2004-2008 David Howells <dhowells@redhat.com>
* Copyright (c) 2000-2003 David McCullough <davidm@snapgear.com>
@@ -100,7 +100,7 @@ config SAMPLE_CONNECTOR
When enabled, this builds both a sample kernel module for
the connector interface and a user space tool to communicate
with it.
- See also Documentation/connector/connector.rst
+ See also Documentation/driver-api/connector.rst
config SAMPLE_SECCOMP
bool "Build seccomp sample code"
@@ -5,7 +5,7 @@
* stack trace and selected registers when _do_fork() is called.
*
* For more information on theory of operation of kprobes, see
- * Documentation/kprobes.rst
+ * Documentation/driver-api/kprobes.rst
*
* You will see the trace data in /var/log/messages and on the console
* whenever _do_fork() is invoked to create a new process.
@@ -11,7 +11,7 @@
* If no func_name is specified, _do_fork is instrumented
*
* For more information on theory of operation of kretprobes, see
- * Documentation/kprobes.rst
+ * Documentation/driver-api/kprobes.rst
*
* Build and insert the kernel module as done in the kprobe example.
* You will see the trace data in /var/log/messages and on the console
@@ -23,7 +23,7 @@ config GCC_PLUGINS
GCC plugins are loadable modules that provide extra features to the
compiler. They are useful for runtime instrumentation and static analysis.
- See Documentation/gcc-plugins.rst for details.
+ See Documentation/driver-api/gcc-plugins.rst for details.
menu "GCC plugins"
depends on GCC_PLUGINS
@@ -11,7 +11,7 @@
I know it's not the cleaner way, but in C (not in C++) to get
performances and genericity...
- See Documentation/rbtree.rst for documentation and samples.
+ See Documentation/driver-api/rbtree.rst for documentation and samples.
*/
#ifndef __TOOLS_LINUX_PERF_RBTREE_H
@@ -23,7 +23,7 @@
* rb_insert_augmented() and rb_erase_augmented() are intended to be public.
* The rest are implementation details you are not expected to depend on.
*
- * See Documentation/rbtree.rst for documentation and samples.
+ * See Documentation/driver-api/rbtree.rst for documentation and samples.
*/
struct rb_augment_callbacks {
Those files belong to the driver-api guide. Add them to the driver-api book. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> --- Documentation/ABI/removed/sysfs-class-rfkill | 2 +- Documentation/ABI/stable/sysfs-class-rfkill | 2 +- .../ABI/testing/sysfs-class-switchtec | 2 +- Documentation/PCI/pci.rst | 2 +- Documentation/admin-guide/hw-vuln/l1tf.rst | 2 +- .../admin-guide/kernel-parameters.txt | 4 +- .../admin-guide/kernel-per-cpu-kthreads.rst | 2 +- .../{ => driver-api}/atomic_bitops.rst | 2 - Documentation/{ => driver-api}/bt8xxgpio.rst | 2 - .../bus-virt-phys-mapping.rst | 2 - .../{connector => driver-api}/connector.rst | 2 - .../{console => driver-api}/console.rst | 2 - Documentation/{ => driver-api}/crc32.rst | 2 - Documentation/{ => driver-api}/dcdbas.rst | 2 - .../{ => driver-api}/debugging-modules.rst | 2 - .../debugging-via-ohci1394.rst | 2 - Documentation/{ => driver-api}/dell_rbu.rst | 2 - Documentation/{ => driver-api}/digsig.rst | 2 - .../{EDID/howto.rst => driver-api/edid.rst} | 2 - Documentation/{ => driver-api}/eisa.rst | 2 - .../{ => driver-api}/futex-requeue-pi.rst | 2 - .../{ => driver-api}/gcc-plugins.rst | 2 - Documentation/{ => driver-api}/hwspinlock.rst | 2 - Documentation/driver-api/index.rst | 66 +++++++++++++++++++ Documentation/{ => driver-api}/io-mapping.rst | 2 - .../{ => driver-api}/io_ordering.rst | 2 - .../{IPMI.rst => driver-api/ipmi.rst} | 2 - .../irq-affinity.rst} | 2 - .../irq-domain.rst} | 2 - Documentation/{IRQ.rst => driver-api/irq.rst} | 2 - .../{ => driver-api}/irqflags-tracing.rst | 2 - Documentation/{ => driver-api}/isa.rst | 2 - Documentation/{ => driver-api}/isapnp.rst | 2 - Documentation/{ => driver-api}/kobject.rst | 4 +- Documentation/{ => driver-api}/kprobes.rst | 2 - Documentation/{ => driver-api}/kref.rst | 2 - .../pblk.txt => driver-api/lightnvm-pblk.rst} | 0 Documentation/{ => driver-api}/lzo.rst | 2 - Documentation/{ => driver-api}/mailbox.rst | 2 - .../{ => driver-api}/men-chameleon-bus.rst | 2 - Documentation/{ => driver-api}/nommu-mmap.rst | 2 - Documentation/{ => driver-api}/ntb.rst | 2 - Documentation/{nvmem => driver-api}/nvmem.rst | 2 - Documentation/{ => driver-api}/padata.rst | 2 - .../{ => driver-api}/parport-lowlevel.rst | 2 - .../{ => driver-api}/percpu-rw-semaphore.rst | 2 - Documentation/{ => driver-api}/pi-futex.rst | 2 - Documentation/driver-api/pps.rst | 2 - .../{ => driver-api}/preempt-locking.rst | 2 - .../{pti => driver-api}/pti_intel_mid.rst | 2 - Documentation/driver-api/ptp.rst | 2 - Documentation/{ => driver-api}/pwm.rst | 2 - Documentation/{ => driver-api}/rbtree.rst | 2 - Documentation/{ => driver-api}/remoteproc.rst | 4 +- Documentation/{ => driver-api}/rfkill.rst | 2 - .../{ => driver-api}/robust-futex-ABI.rst | 2 - .../{ => driver-api}/robust-futexes.rst | 2 - Documentation/{ => driver-api}/rpmsg.rst | 2 - Documentation/{ => driver-api}/sgi-ioc4.rst | 2 - .../{SM501.rst => driver-api/sm501.rst} | 2 - .../{ => driver-api}/smsc_ece1099.rst | 2 - .../{ => driver-api}/speculation.rst | 8 +-- .../{ => driver-api}/static-keys.rst | 2 - Documentation/{ => driver-api}/switchtec.rst | 4 +- Documentation/{ => driver-api}/sync_file.rst | 2 - Documentation/{ => driver-api}/tee.rst | 2 - .../{ => driver-api}/this_cpu_ops.rst | 2 - .../unaligned-memory-access.rst | 2 - .../{ => driver-api}/vfio-mediated-device.rst | 4 +- Documentation/{ => driver-api}/vfio.rst | 2 - Documentation/{ => driver-api}/xillybus.rst | 2 - Documentation/{ => driver-api}/xz.rst | 2 - Documentation/{ => driver-api}/zorro.rst | 2 - Documentation/driver-model/device.rst | 2 +- Documentation/fb/fbcon.rst | 4 +- Documentation/filesystems/sysfs.txt | 2 +- Documentation/gpu/drm-mm.rst | 2 +- Documentation/ia64/irq-redir.rst | 2 +- Documentation/laptops/thinkpad-acpi.rst | 6 +- Documentation/locking/rt-mutex.rst | 2 +- Documentation/networking/scaling.rst | 4 +- Documentation/s390/vfio-ccw.rst | 6 +- Documentation/sysctl/kernel.rst | 2 +- Documentation/sysctl/vm.rst | 2 +- Documentation/trace/kprobetrace.rst | 2 +- Documentation/translations/zh_CN/IRQ.txt | 4 +- .../translations/zh_CN/filesystems/sysfs.txt | 2 +- .../translations/zh_CN/io_ordering.txt | 4 +- Documentation/w1/w1.netlink | 2 +- Documentation/watchdog/hpwdt.rst | 2 +- MAINTAINERS | 46 ++++++------- arch/Kconfig | 4 +- arch/unicore32/include/asm/io.h | 2 +- drivers/base/core.c | 2 +- drivers/char/ipmi/Kconfig | 2 +- drivers/char/ipmi/ipmi_si_hotmod.c | 2 +- drivers/char/ipmi/ipmi_si_intf.c | 2 +- drivers/dma-buf/Kconfig | 2 +- drivers/gpio/Kconfig | 2 +- drivers/gpu/drm/Kconfig | 2 +- drivers/pci/switch/Kconfig | 2 +- drivers/platform/x86/Kconfig | 4 +- drivers/platform/x86/dcdbas.c | 2 +- drivers/platform/x86/dell_rbu.c | 2 +- drivers/pnp/isapnp/Kconfig | 2 +- drivers/tty/Kconfig | 2 +- drivers/vfio/Kconfig | 2 +- drivers/vfio/mdev/Kconfig | 2 +- drivers/w1/Kconfig | 2 +- include/asm-generic/bitops/atomic.h | 2 +- include/linux/io-mapping.h | 2 +- include/linux/jump_label.h | 2 +- include/linux/kobject.h | 2 +- include/linux/kobject_ns.h | 2 +- include/linux/rbtree.h | 2 +- include/linux/rbtree_augmented.h | 2 +- init/Kconfig | 2 +- kernel/padata.c | 2 +- lib/Kconfig | 2 +- lib/Kconfig.debug | 2 +- lib/crc32.c | 2 +- lib/kobject.c | 4 +- lib/lzo/lzo1x_decompress_safe.c | 2 +- lib/xz/Kconfig | 2 +- mm/Kconfig | 2 +- mm/nommu.c | 2 +- samples/Kconfig | 2 +- samples/kprobes/kprobe_example.c | 2 +- samples/kprobes/kretprobe_example.c | 2 +- scripts/gcc-plugins/Kconfig | 2 +- tools/include/linux/rbtree.h | 2 +- tools/include/linux/rbtree_augmented.h | 2 +- 132 files changed, 173 insertions(+), 235 deletions(-) rename Documentation/{ => driver-api}/atomic_bitops.rst (99%) rename Documentation/{ => driver-api}/bt8xxgpio.rst (99%) rename Documentation/{ => driver-api}/bus-virt-phys-mapping.rst (99%) rename Documentation/{connector => driver-api}/connector.rst (99%) rename Documentation/{console => driver-api}/console.rst (99%) rename Documentation/{ => driver-api}/crc32.rst (99%) rename Documentation/{ => driver-api}/dcdbas.rst (99%) rename Documentation/{ => driver-api}/debugging-modules.rst (98%) rename Documentation/{ => driver-api}/debugging-via-ohci1394.rst (99%) rename Documentation/{ => driver-api}/dell_rbu.rst (99%) rename Documentation/{ => driver-api}/digsig.rst (99%) rename Documentation/{EDID/howto.rst => driver-api/edid.rst} (99%) rename Documentation/{ => driver-api}/eisa.rst (99%) rename Documentation/{ => driver-api}/futex-requeue-pi.rst (99%) rename Documentation/{ => driver-api}/gcc-plugins.rst (99%) rename Documentation/{ => driver-api}/hwspinlock.rst (99%) rename Documentation/{ => driver-api}/io-mapping.rst (99%) rename Documentation/{ => driver-api}/io_ordering.rst (99%) rename Documentation/{IPMI.rst => driver-api/ipmi.rst} (99%) rename Documentation/{IRQ-affinity.rst => driver-api/irq-affinity.rst} (99%) rename Documentation/{IRQ-domain.rst => driver-api/irq-domain.rst} (99%) rename Documentation/{IRQ.rst => driver-api/irq.rst} (99%) rename Documentation/{ => driver-api}/irqflags-tracing.rst (99%) rename Documentation/{ => driver-api}/isa.rst (99%) rename Documentation/{ => driver-api}/isapnp.rst (98%) rename Documentation/{ => driver-api}/kobject.rst (99%) rename Documentation/{ => driver-api}/kprobes.rst (99%) rename Documentation/{ => driver-api}/kref.rst (99%) rename Documentation/{lightnvm/pblk.txt => driver-api/lightnvm-pblk.rst} (100%) rename Documentation/{ => driver-api}/lzo.rst (99%) rename Documentation/{ => driver-api}/mailbox.rst (99%) rename Documentation/{ => driver-api}/men-chameleon-bus.rst (99%) rename Documentation/{ => driver-api}/nommu-mmap.rst (99%) rename Documentation/{ => driver-api}/ntb.rst (99%) rename Documentation/{nvmem => driver-api}/nvmem.rst (99%) rename Documentation/{ => driver-api}/padata.rst (99%) rename Documentation/{ => driver-api}/parport-lowlevel.rst (99%) rename Documentation/{ => driver-api}/percpu-rw-semaphore.rst (99%) rename Documentation/{ => driver-api}/pi-futex.rst (99%) rename Documentation/{ => driver-api}/preempt-locking.rst (99%) rename Documentation/{pti => driver-api}/pti_intel_mid.rst (99%) rename Documentation/{ => driver-api}/pwm.rst (99%) rename Documentation/{ => driver-api}/rbtree.rst (99%) rename Documentation/{ => driver-api}/remoteproc.rst (99%) rename Documentation/{ => driver-api}/rfkill.rst (99%) rename Documentation/{ => driver-api}/robust-futex-ABI.rst (99%) rename Documentation/{ => driver-api}/robust-futexes.rst (99%) rename Documentation/{ => driver-api}/rpmsg.rst (99%) rename Documentation/{ => driver-api}/sgi-ioc4.rst (99%) rename Documentation/{SM501.rst => driver-api/sm501.rst} (99%) rename Documentation/{ => driver-api}/smsc_ece1099.rst (99%) rename Documentation/{ => driver-api}/speculation.rst (99%) rename Documentation/{ => driver-api}/static-keys.rst (99%) rename Documentation/{ => driver-api}/switchtec.rst (97%) rename Documentation/{ => driver-api}/sync_file.rst (99%) rename Documentation/{ => driver-api}/tee.rst (99%) rename Documentation/{ => driver-api}/this_cpu_ops.rst (99%) rename Documentation/{ => driver-api}/unaligned-memory-access.rst (99%) rename Documentation/{ => driver-api}/vfio-mediated-device.rst (99%) rename Documentation/{ => driver-api}/vfio.rst (99%) rename Documentation/{ => driver-api}/xillybus.rst (99%) rename Documentation/{ => driver-api}/xz.rst (99%) rename Documentation/{ => driver-api}/zorro.rst (99%)