diff mbox series

[2/4] null_blk: add zone open, close, and finish support

Message ID 20190621130711.21986-3-mb@lightnvm.io (mailing list archive)
State Not Applicable, archived
Delegated to: Mike Snitzer
Headers show
Series open, close, finish zone support | expand

Commit Message

Matias Bjorling June 21, 2019, 1:07 p.m. UTC 
From: Ajay Joshi <ajay.joshi@wdc.com>

Implement REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH
support to allow explicit control of zone states.

Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
---
 drivers/block/null_blk.h       |  4 ++--
 drivers/block/null_blk_main.c  | 13 ++++++++++---
 drivers/block/null_blk_zoned.c | 33 ++++++++++++++++++++++++++++++---
 3 files changed, 42 insertions(+), 8 deletions(-)

Comments

Matias Bjorling June 25, 2019, 11:06 a.m. UTC | #1 
On 6/22/19 3:02 AM, Damien Le Moal wrote:
> On 2019/06/21 22:07, Matias Bjørling wrote:
>> From: Ajay Joshi <ajay.joshi@wdc.com>
>>
>> Implement REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH
>> support to allow explicit control of zone states.
>>
>> Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
>> Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
>> ---
>>   drivers/block/null_blk.h       |  4 ++--
>>   drivers/block/null_blk_main.c  | 13 ++++++++++---
>>   drivers/block/null_blk_zoned.c | 33 ++++++++++++++++++++++++++++++---
>>   3 files changed, 42 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/block/null_blk.h b/drivers/block/null_blk.h
>> index 34b22d6523ba..62ef65cb0f3e 100644
>> --- a/drivers/block/null_blk.h
>> +++ b/drivers/block/null_blk.h
>> @@ -93,7 +93,7 @@ int null_zone_report(struct gendisk *disk, sector_t sector,
>>   		     gfp_t gfp_mask);
>>   void null_zone_write(struct nullb_cmd *cmd, sector_t sector,
>>   			unsigned int nr_sectors);
>> -void null_zone_reset(struct nullb_cmd *cmd, sector_t sector);
>> +void null_zone_mgmt_op(struct nullb_cmd *cmd, sector_t sector);
>>   #else
>>   static inline int null_zone_init(struct nullb_device *dev)
>>   {
>> @@ -111,6 +111,6 @@ static inline void null_zone_write(struct nullb_cmd *cmd, sector_t sector,
>>   				   unsigned int nr_sectors)
>>   {
>>   }
>> -static inline void null_zone_reset(struct nullb_cmd *cmd, sector_t sector) {}
>> +static inline void null_zone_mgmt_op(struct nullb_cmd *cmd, sector_t sector) {}
>>   #endif /* CONFIG_BLK_DEV_ZONED */
>>   #endif /* __NULL_BLK_H */
>> diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
>> index 447d635c79a2..5058fb980c9c 100644
>> --- a/drivers/block/null_blk_main.c
>> +++ b/drivers/block/null_blk_main.c
>> @@ -1209,10 +1209,17 @@ static blk_status_t null_handle_cmd(struct nullb_cmd *cmd)
>>   			nr_sectors = blk_rq_sectors(cmd->rq);
>>   		}
>>   
>> -		if (op == REQ_OP_WRITE)
>> +		switch (op) {
>> +		case REQ_OP_WRITE:
>>   			null_zone_write(cmd, sector, nr_sectors);
>> -		else if (op == REQ_OP_ZONE_RESET)
>> -			null_zone_reset(cmd, sector);
>> +			break;
>> +		case REQ_OP_ZONE_RESET:
>> +		case REQ_OP_ZONE_OPEN:
>> +		case REQ_OP_ZONE_CLOSE:
>> +		case REQ_OP_ZONE_FINISH:
>> +			null_zone_mgmt_op(cmd, sector);
>> +			break;
>> +		}
>>   	}
>>   out:
>>   	/* Complete IO by inline, softirq or timer */
>> diff --git a/drivers/block/null_blk_zoned.c b/drivers/block/null_blk_zoned.c
>> index fca0c97ff1aa..47d956b2e148 100644
>> --- a/drivers/block/null_blk_zoned.c
>> +++ b/drivers/block/null_blk_zoned.c
>> @@ -121,17 +121,44 @@ void null_zone_write(struct nullb_cmd *cmd, sector_t sector,
>>   	}
>>   }
>>   
>> -void null_zone_reset(struct nullb_cmd *cmd, sector_t sector)
>> +void null_zone_mgmt_op(struct nullb_cmd *cmd, sector_t sector)
>>   {
>>   	struct nullb_device *dev = cmd->nq->dev;
>>   	unsigned int zno = null_zone_no(dev, sector);
>>   	struct blk_zone *zone = &dev->zones[zno];
>> +	enum req_opf op = req_op(cmd->rq);
>>   
>>   	if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL) {
>>   		cmd->error = BLK_STS_IOERR;
>>   		return;
>>   	}
>>   
>> -	zone->cond = BLK_ZONE_COND_EMPTY;
>> -	zone->wp = zone->start;
>> +	switch (op) {
>> +	case REQ_OP_ZONE_RESET:
>> +		zone->cond = BLK_ZONE_COND_EMPTY;
>> +		zone->wp = zone->start;
>> +		return;
>> +	case REQ_OP_ZONE_OPEN:
>> +		if (zone->cond == BLK_ZONE_COND_FULL) {
>> +			cmd->error = BLK_STS_IOERR;
>> +			return;
>> +		}
>> +		zone->cond = BLK_ZONE_COND_EXP_OPEN;
> 
> 
> With ZBC, open of a full zone is a "nop". No error. So I would rather have this as:
> 
> 		if (zone->cond != BLK_ZONE_COND_FULL)
> 			zone->cond = BLK_ZONE_COND_EXP_OPEN;
> 		
Is this only ZBC? I can't find a reference to it in ZAC. I think it 
should fail. One is trying to open a zone that is full, one can't open 
it again. It's done for this round.
> 
>> +		return;
>> +	case REQ_OP_ZONE_CLOSE:
>> +		if (zone->cond == BLK_ZONE_COND_FULL) {
>> +			cmd->error = BLK_STS_IOERR;
>> +			return;
>> +		}
>> +		zone->cond = BLK_ZONE_COND_CLOSED;
> 
> Sam as for open. Closing a full zone on ZBC is a nop. 

I think this should cause error.

And the code above would
> also set an empty zone to closed. Finally, if the zone is open but nothing was
> written to it, it must be returned to empty condition, not closed. 

Only on a reset event right? In general, if I do a expl. open, close it, 
it should not go to empty.

So something
> like this is needed.
> 
> 		switch (zone->cond) {
> 		case BLK_ZONE_COND_FULL:
> 		case BLK_ZONE_COND_EMPTY:
> 			break;
> 		case BLK_ZONE_COND_EXP_OPEN:
> 			if (zone->wp == zone->start) {
> 				zone->cond = BLK_ZONE_COND_EMPTY;
> 				break;
> 			}
> 		/* fallthrough */
> 		default:
> 			zone->cond = BLK_ZONE_COND_CLOSED;
> 		}
> 
>> +		return;
>> +	case REQ_OP_ZONE_FINISH:
>> +		zone->cond = BLK_ZONE_COND_FULL;
>> +		zone->wp = zone->start + zone->len;
>> +		return;
>> +	default:
>> +		/* Invalid zone condition */
>> +		cmd->error = BLK_STS_IOERR;
>> +		return;
>> +	}
>>   }
>>
> 
> 

--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
Damien Le Moal June 25, 2019, 12:36 p.m. UTC | #2 
On 2019/06/25 20:06, Matias Bjørling wrote:
> On 6/22/19 3:02 AM, Damien Le Moal wrote:
>> On 2019/06/21 22:07, Matias Bjørling wrote:
>>> From: Ajay Joshi <ajay.joshi@wdc.com>
>>>
>>> Implement REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH
>>> support to allow explicit control of zone states.
>>>
>>> Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
>>> Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
>>> ---
>>>   drivers/block/null_blk.h       |  4 ++--
>>>   drivers/block/null_blk_main.c  | 13 ++++++++++---
>>>   drivers/block/null_blk_zoned.c | 33 ++++++++++++++++++++++++++++++---
>>>   3 files changed, 42 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/drivers/block/null_blk.h b/drivers/block/null_blk.h
>>> index 34b22d6523ba..62ef65cb0f3e 100644
>>> --- a/drivers/block/null_blk.h
>>> +++ b/drivers/block/null_blk.h
>>> @@ -93,7 +93,7 @@ int null_zone_report(struct gendisk *disk, sector_t sector,
>>>   		     gfp_t gfp_mask);
>>>   void null_zone_write(struct nullb_cmd *cmd, sector_t sector,
>>>   			unsigned int nr_sectors);
>>> -void null_zone_reset(struct nullb_cmd *cmd, sector_t sector);
>>> +void null_zone_mgmt_op(struct nullb_cmd *cmd, sector_t sector);
>>>   #else
>>>   static inline int null_zone_init(struct nullb_device *dev)
>>>   {
>>> @@ -111,6 +111,6 @@ static inline void null_zone_write(struct nullb_cmd *cmd, sector_t sector,
>>>   				   unsigned int nr_sectors)
>>>   {
>>>   }
>>> -static inline void null_zone_reset(struct nullb_cmd *cmd, sector_t sector) {}
>>> +static inline void null_zone_mgmt_op(struct nullb_cmd *cmd, sector_t sector) {}
>>>   #endif /* CONFIG_BLK_DEV_ZONED */
>>>   #endif /* __NULL_BLK_H */
>>> diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
>>> index 447d635c79a2..5058fb980c9c 100644
>>> --- a/drivers/block/null_blk_main.c
>>> +++ b/drivers/block/null_blk_main.c
>>> @@ -1209,10 +1209,17 @@ static blk_status_t null_handle_cmd(struct nullb_cmd *cmd)
>>>   			nr_sectors = blk_rq_sectors(cmd->rq);
>>>   		}
>>>   
>>> -		if (op == REQ_OP_WRITE)
>>> +		switch (op) {
>>> +		case REQ_OP_WRITE:
>>>   			null_zone_write(cmd, sector, nr_sectors);
>>> -		else if (op == REQ_OP_ZONE_RESET)
>>> -			null_zone_reset(cmd, sector);
>>> +			break;
>>> +		case REQ_OP_ZONE_RESET:
>>> +		case REQ_OP_ZONE_OPEN:
>>> +		case REQ_OP_ZONE_CLOSE:
>>> +		case REQ_OP_ZONE_FINISH:
>>> +			null_zone_mgmt_op(cmd, sector);
>>> +			break;
>>> +		}
>>>   	}
>>>   out:
>>>   	/* Complete IO by inline, softirq or timer */
>>> diff --git a/drivers/block/null_blk_zoned.c b/drivers/block/null_blk_zoned.c
>>> index fca0c97ff1aa..47d956b2e148 100644
>>> --- a/drivers/block/null_blk_zoned.c
>>> +++ b/drivers/block/null_blk_zoned.c
>>> @@ -121,17 +121,44 @@ void null_zone_write(struct nullb_cmd *cmd, sector_t sector,
>>>   	}
>>>   }
>>>   
>>> -void null_zone_reset(struct nullb_cmd *cmd, sector_t sector)
>>> +void null_zone_mgmt_op(struct nullb_cmd *cmd, sector_t sector)
>>>   {
>>>   	struct nullb_device *dev = cmd->nq->dev;
>>>   	unsigned int zno = null_zone_no(dev, sector);
>>>   	struct blk_zone *zone = &dev->zones[zno];
>>> +	enum req_opf op = req_op(cmd->rq);
>>>   
>>>   	if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL) {
>>>   		cmd->error = BLK_STS_IOERR;
>>>   		return;
>>>   	}
>>>   
>>> -	zone->cond = BLK_ZONE_COND_EMPTY;
>>> -	zone->wp = zone->start;
>>> +	switch (op) {
>>> +	case REQ_OP_ZONE_RESET:
>>> +		zone->cond = BLK_ZONE_COND_EMPTY;
>>> +		zone->wp = zone->start;
>>> +		return;
>>> +	case REQ_OP_ZONE_OPEN:
>>> +		if (zone->cond == BLK_ZONE_COND_FULL) {
>>> +			cmd->error = BLK_STS_IOERR;
>>> +			return;
>>> +		}
>>> +		zone->cond = BLK_ZONE_COND_EXP_OPEN;
>>
>>
>> With ZBC, open of a full zone is a "nop". No error. So I would rather have this as:
>>
>> 		if (zone->cond != BLK_ZONE_COND_FULL)
>> 			zone->cond = BLK_ZONE_COND_EXP_OPEN;
>> 		
> Is this only ZBC? I can't find a reference to it in ZAC. I think it 
> should fail. One is trying to open a zone that is full, one can't open 
> it again. It's done for this round.

Page 52/53, section 5.2.6.3.2:

If the OPEN ALL bit is cleared to zero and the zone specified by the ZONE ID
field (see 5.2.4.3.3) is in Zone Condition:
a) EMPTY, IMPLICITLY OPENED, or CLOSED, then the device shall process an
Explicitly Open Zone function
(see 4.6.3.4.10) for the zone specified by the ZONE ID field;
b) EXPLICITLY OPENED or FULL, then the device shall:
	A) not change the zone's state; and
	B) return successful command completion;

>>
>>> +		return;
>>> +	case REQ_OP_ZONE_CLOSE:
>>> +		if (zone->cond == BLK_ZONE_COND_FULL) {
>>> +			cmd->error = BLK_STS_IOERR;
>>> +			return;
>>> +		}
>>> +		zone->cond = BLK_ZONE_COND_CLOSED;
>>
>> Sam as for open. Closing a full zone on ZBC is a nop. 
> 
> I think this should cause error.

See ZAB/ZAC close command description. Same text as above, almost. Not an error.
It is a nop. ZAC page 48, section 5.2.4.3.2:

If the CLOSE ALL bit is cleared to zero and the zone specified by the ZONE ID
field (see 5.2.4.3.3) is in Zone Condition:
a) IMPLICITLY OPENED, or EXPLICITLY OPENED, then the device shall process a
Close Zone function
(see 4.6.3.4.11) for the zone specified by the ZONE ID field;
b) EMPTY, CLOSED, or FULL, then the device shall:
	A) not change the zone's state; and
	B) return successful command completion;

> 
> And the code above would
>> also set an empty zone to closed. Finally, if the zone is open but nothing was
>> written to it, it must be returned to empty condition, not closed. 
> 
> Only on a reset event right? In general, if I do a expl. open, close it, 
> it should not go to empty.

See the zone state machine. It does return to empty from expl open if nothing
was written, that is, if the WP is still at zone start. This text is in ZAC
section 4.6.3.4.11 as noted above:

For the specified zone, the Zone Condition state machine processing of this
function (e.g., as shown in the ZC2: Implicit_Open state (see 4.6.3.4.3))
results in the Zone Condition for the specified zone becoming:
a) EMPTY, if the write pointer indicates the lowest LBA in the zone and Non
Sequential Write Resources Active is false; or
b) CLOSED, if the write pointer does not indicate the lowest LBA in the zone or
Non-Sequential Write Resources Active is true.

> 
> So something
>> like this is needed.
>>
>> 		switch (zone->cond) {
>> 		case BLK_ZONE_COND_FULL:
>> 		case BLK_ZONE_COND_EMPTY:
>> 			break;
>> 		case BLK_ZONE_COND_EXP_OPEN:
>> 			if (zone->wp == zone->start) {
>> 				zone->cond = BLK_ZONE_COND_EMPTY;
>> 				break;
>> 			}
>> 		/* fallthrough */
>> 		default:
>> 			zone->cond = BLK_ZONE_COND_CLOSED;
>> 		}
>>
>>> +		return;
>>> +	case REQ_OP_ZONE_FINISH:
>>> +		zone->cond = BLK_ZONE_COND_FULL;
>>> +		zone->wp = zone->start + zone->len;
>>> +		return;
>>> +	default:
>>> +		/* Invalid zone condition */
>>> +		cmd->error = BLK_STS_IOERR;
>>> +		return;
>>> +	}
>>>   }
>>>
>>
>>
> 
>
Matias Bjorling June 25, 2019, 1:03 p.m. UTC | #3 
On 6/25/19 2:36 PM, Damien Le Moal wrote:
> On 2019/06/25 20:06, Matias Bjørling wrote:
>> On 6/22/19 3:02 AM, Damien Le Moal wrote:
>>> On 2019/06/21 22:07, Matias Bjørling wrote:
>>>> From: Ajay Joshi <ajay.joshi@wdc.com>
>>>>
>>>> Implement REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH
>>>> support to allow explicit control of zone states.
>>>>
>>>> Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
>>>> Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
>>>> ---
>>>>    drivers/block/null_blk.h       |  4 ++--
>>>>    drivers/block/null_blk_main.c  | 13 ++++++++++---
>>>>    drivers/block/null_blk_zoned.c | 33 ++++++++++++++++++++++++++++++---
>>>>    3 files changed, 42 insertions(+), 8 deletions(-)
>>>>
>>>> diff --git a/drivers/block/null_blk.h b/drivers/block/null_blk.h
>>>> index 34b22d6523ba..62ef65cb0f3e 100644
>>>> --- a/drivers/block/null_blk.h
>>>> +++ b/drivers/block/null_blk.h
>>>> @@ -93,7 +93,7 @@ int null_zone_report(struct gendisk *disk, sector_t sector,
>>>>    		     gfp_t gfp_mask);
>>>>    void null_zone_write(struct nullb_cmd *cmd, sector_t sector,
>>>>    			unsigned int nr_sectors);
>>>> -void null_zone_reset(struct nullb_cmd *cmd, sector_t sector);
>>>> +void null_zone_mgmt_op(struct nullb_cmd *cmd, sector_t sector);
>>>>    #else
>>>>    static inline int null_zone_init(struct nullb_device *dev)
>>>>    {
>>>> @@ -111,6 +111,6 @@ static inline void null_zone_write(struct nullb_cmd *cmd, sector_t sector,
>>>>    				   unsigned int nr_sectors)
>>>>    {
>>>>    }
>>>> -static inline void null_zone_reset(struct nullb_cmd *cmd, sector_t sector) {}
>>>> +static inline void null_zone_mgmt_op(struct nullb_cmd *cmd, sector_t sector) {}
>>>>    #endif /* CONFIG_BLK_DEV_ZONED */
>>>>    #endif /* __NULL_BLK_H */
>>>> diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
>>>> index 447d635c79a2..5058fb980c9c 100644
>>>> --- a/drivers/block/null_blk_main.c
>>>> +++ b/drivers/block/null_blk_main.c
>>>> @@ -1209,10 +1209,17 @@ static blk_status_t null_handle_cmd(struct nullb_cmd *cmd)
>>>>    			nr_sectors = blk_rq_sectors(cmd->rq);
>>>>    		}
>>>>    
>>>> -		if (op == REQ_OP_WRITE)
>>>> +		switch (op) {
>>>> +		case REQ_OP_WRITE:
>>>>    			null_zone_write(cmd, sector, nr_sectors);
>>>> -		else if (op == REQ_OP_ZONE_RESET)
>>>> -			null_zone_reset(cmd, sector);
>>>> +			break;
>>>> +		case REQ_OP_ZONE_RESET:
>>>> +		case REQ_OP_ZONE_OPEN:
>>>> +		case REQ_OP_ZONE_CLOSE:
>>>> +		case REQ_OP_ZONE_FINISH:
>>>> +			null_zone_mgmt_op(cmd, sector);
>>>> +			break;
>>>> +		}
>>>>    	}
>>>>    out:
>>>>    	/* Complete IO by inline, softirq or timer */
>>>> diff --git a/drivers/block/null_blk_zoned.c b/drivers/block/null_blk_zoned.c
>>>> index fca0c97ff1aa..47d956b2e148 100644
>>>> --- a/drivers/block/null_blk_zoned.c
>>>> +++ b/drivers/block/null_blk_zoned.c
>>>> @@ -121,17 +121,44 @@ void null_zone_write(struct nullb_cmd *cmd, sector_t sector,
>>>>    	}
>>>>    }
>>>>    
>>>> -void null_zone_reset(struct nullb_cmd *cmd, sector_t sector)
>>>> +void null_zone_mgmt_op(struct nullb_cmd *cmd, sector_t sector)
>>>>    {
>>>>    	struct nullb_device *dev = cmd->nq->dev;
>>>>    	unsigned int zno = null_zone_no(dev, sector);
>>>>    	struct blk_zone *zone = &dev->zones[zno];
>>>> +	enum req_opf op = req_op(cmd->rq);
>>>>    
>>>>    	if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL) {
>>>>    		cmd->error = BLK_STS_IOERR;
>>>>    		return;
>>>>    	}
>>>>    
>>>> -	zone->cond = BLK_ZONE_COND_EMPTY;
>>>> -	zone->wp = zone->start;
>>>> +	switch (op) {
>>>> +	case REQ_OP_ZONE_RESET:
>>>> +		zone->cond = BLK_ZONE_COND_EMPTY;
>>>> +		zone->wp = zone->start;
>>>> +		return;
>>>> +	case REQ_OP_ZONE_OPEN:
>>>> +		if (zone->cond == BLK_ZONE_COND_FULL) {
>>>> +			cmd->error = BLK_STS_IOERR;
>>>> +			return;
>>>> +		}
>>>> +		zone->cond = BLK_ZONE_COND_EXP_OPEN;
>>>
>>>
>>> With ZBC, open of a full zone is a "nop". No error. So I would rather have this as:
>>>
>>> 		if (zone->cond != BLK_ZONE_COND_FULL)
>>> 			zone->cond = BLK_ZONE_COND_EXP_OPEN;
>>> 		
>> Is this only ZBC? I can't find a reference to it in ZAC. I think it
>> should fail. One is trying to open a zone that is full, one can't open
>> it again. It's done for this round.
> 
> Page 52/53, section 5.2.6.3.2:
> 
> If the OPEN ALL bit is cleared to zero and the zone specified by the ZONE ID
> field (see 5.2.4.3.3) is in Zone Condition:
> a) EMPTY, IMPLICITLY OPENED, or CLOSED, then the device shall process an
> Explicitly Open Zone function
> (see 4.6.3.4.10) for the zone specified by the ZONE ID field;
> b) EXPLICITLY OPENED or FULL, then the device shall:
> 	A) not change the zone's state; and
> 	B) return successful command completion;
> 
>>>
>>>> +		return;
>>>> +	case REQ_OP_ZONE_CLOSE:
>>>> +		if (zone->cond == BLK_ZONE_COND_FULL) {
>>>> +			cmd->error = BLK_STS_IOERR;
>>>> +			return;
>>>> +		}
>>>> +		zone->cond = BLK_ZONE_COND_CLOSED;
>>>
>>> Sam as for open. Closing a full zone on ZBC is a nop.
>>
>> I think this should cause error.
> 
> See ZAB/ZAC close command description. Same text as above, almost. Not an error.
> It is a nop. ZAC page 48, section 5.2.4.3.2:
> 
> If the CLOSE ALL bit is cleared to zero and the zone specified by the ZONE ID
> field (see 5.2.4.3.3) is in Zone Condition:
> a) IMPLICITLY OPENED, or EXPLICITLY OPENED, then the device shall process a
> Close Zone function
> (see 4.6.3.4.11) for the zone specified by the ZONE ID field;
> b) EMPTY, CLOSED, or FULL, then the device shall:
> 	A) not change the zone's state; and
> 	B) return successful command completion;
> 
>>
>> And the code above would
>>> also set an empty zone to closed. Finally, if the zone is open but nothing was
>>> written to it, it must be returned to empty condition, not closed.
>>
>> Only on a reset event right? In general, if I do a expl. open, close it,
>> it should not go to empty.
> 
> See the zone state machine. It does return to empty from expl open if nothing
> was written, that is, if the WP is still at zone start. This text is in ZAC
> section 4.6.3.4.11 as noted above:
> 
> For the specified zone, the Zone Condition state machine processing of this
> function (e.g., as shown in the ZC2: Implicit_Open state (see 4.6.3.4.3))
> results in the Zone Condition for the specified zone becoming:
> a) EMPTY, if the write pointer indicates the lowest LBA in the zone and Non
> Sequential Write Resources Active is false; or
> b) CLOSED, if the write pointer does not indicate the lowest LBA in the zone or
> Non-Sequential Write Resources Active is true.
> 

Schooled! That is what one gets from having the spec in paper form on 
the table ;)

>>
>> So something
>>> like this is needed.
>>>
>>> 		switch (zone->cond) {
>>> 		case BLK_ZONE_COND_FULL:
>>> 		case BLK_ZONE_COND_EMPTY:
>>> 			break;
>>> 		case BLK_ZONE_COND_EXP_OPEN:
>>> 			if (zone->wp == zone->start) {
>>> 				zone->cond = BLK_ZONE_COND_EMPTY;
>>> 				break;
>>> 			}
>>> 		/* fallthrough */
>>> 		default:
>>> 			zone->cond = BLK_ZONE_COND_CLOSED;
>>> 		}
>>>
>>>> +		return;
>>>> +	case REQ_OP_ZONE_FINISH:
>>>> +		zone->cond = BLK_ZONE_COND_FULL;
>>>> +		zone->wp = zone->start + zone->len;
>>>> +		return;
>>>> +	default:
>>>> +		/* Invalid zone condition */
>>>> +		cmd->error = BLK_STS_IOERR;
>>>> +		return;
>>>> +	}
>>>>    }
>>>>
>>>
>>>
>>
>>
> 
> 

--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
diff mbox series

Patch

diff --git a/drivers/block/null_blk.h b/drivers/block/null_blk.h
index 34b22d6523ba..62ef65cb0f3e 100644
--- a/drivers/block/null_blk.h
+++ b/drivers/block/null_blk.h
@@ -93,7 +93,7 @@  int null_zone_report(struct gendisk *disk, sector_t sector,
 		     gfp_t gfp_mask);
 void null_zone_write(struct nullb_cmd *cmd, sector_t sector,
 			unsigned int nr_sectors);
-void null_zone_reset(struct nullb_cmd *cmd, sector_t sector);
+void null_zone_mgmt_op(struct nullb_cmd *cmd, sector_t sector);
 #else
 static inline int null_zone_init(struct nullb_device *dev)
 {
@@ -111,6 +111,6 @@  static inline void null_zone_write(struct nullb_cmd *cmd, sector_t sector,
 				   unsigned int nr_sectors)
 {
 }
-static inline void null_zone_reset(struct nullb_cmd *cmd, sector_t sector) {}
+static inline void null_zone_mgmt_op(struct nullb_cmd *cmd, sector_t sector) {}
 #endif /* CONFIG_BLK_DEV_ZONED */
 #endif /* __NULL_BLK_H */
diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index 447d635c79a2..5058fb980c9c 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -1209,10 +1209,17 @@  static blk_status_t null_handle_cmd(struct nullb_cmd *cmd)
 			nr_sectors = blk_rq_sectors(cmd->rq);
 		}
 
-		if (op == REQ_OP_WRITE)
+		switch (op) {
+		case REQ_OP_WRITE:
 			null_zone_write(cmd, sector, nr_sectors);
-		else if (op == REQ_OP_ZONE_RESET)
-			null_zone_reset(cmd, sector);
+			break;
+		case REQ_OP_ZONE_RESET:
+		case REQ_OP_ZONE_OPEN:
+		case REQ_OP_ZONE_CLOSE:
+		case REQ_OP_ZONE_FINISH:
+			null_zone_mgmt_op(cmd, sector);
+			break;
+		}
 	}
 out:
 	/* Complete IO by inline, softirq or timer */
diff --git a/drivers/block/null_blk_zoned.c b/drivers/block/null_blk_zoned.c
index fca0c97ff1aa..47d956b2e148 100644
--- a/drivers/block/null_blk_zoned.c
+++ b/drivers/block/null_blk_zoned.c
@@ -121,17 +121,44 @@  void null_zone_write(struct nullb_cmd *cmd, sector_t sector,
 	}
 }
 
-void null_zone_reset(struct nullb_cmd *cmd, sector_t sector)
+void null_zone_mgmt_op(struct nullb_cmd *cmd, sector_t sector)
 {
 	struct nullb_device *dev = cmd->nq->dev;
 	unsigned int zno = null_zone_no(dev, sector);
 	struct blk_zone *zone = &dev->zones[zno];
+	enum req_opf op = req_op(cmd->rq);
 
 	if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL) {
 		cmd->error = BLK_STS_IOERR;
 		return;
 	}
 
-	zone->cond = BLK_ZONE_COND_EMPTY;
-	zone->wp = zone->start;
+	switch (op) {
+	case REQ_OP_ZONE_RESET:
+		zone->cond = BLK_ZONE_COND_EMPTY;
+		zone->wp = zone->start;
+		return;
+	case REQ_OP_ZONE_OPEN:
+		if (zone->cond == BLK_ZONE_COND_FULL) {
+			cmd->error = BLK_STS_IOERR;
+			return;
+		}
+		zone->cond = BLK_ZONE_COND_EXP_OPEN;
+		return;
+	case REQ_OP_ZONE_CLOSE:
+		if (zone->cond == BLK_ZONE_COND_FULL) {
+			cmd->error = BLK_STS_IOERR;
+			return;
+		}
+		zone->cond = BLK_ZONE_COND_CLOSED;
+		return;
+	case REQ_OP_ZONE_FINISH:
+		zone->cond = BLK_ZONE_COND_FULL;
+		zone->wp = zone->start + zone->len;
+		return;
+	default:
+		/* Invalid zone condition */
+		cmd->error = BLK_STS_IOERR;
+		return;
+	}
 }