diff mbox series

[v3,1/4] dt-bindngs: display: panel: Add BOE tv101wum-n16 panel bindings

Message ID 20190626025400.109567-2-jitao.shi@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Add drivers for auo, kd101n80-45na and boe, tv101wum-nl6 panels | expand

Commit Message

Jitao Shi June 26, 2019, 2:53 a.m. UTC
Add documentation for boe tv101wum-n16 panel.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
 .../display/panel/boe,tv101wum-nl6.txt        | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt

Comments

Sam Ravnborg June 26, 2019, 7:20 a.m. UTC | #1
On Wed, Jun 26, 2019 at 10:53:57AM +0800, Jitao Shi wrote:
> Add documentation for boe tv101wum-n16 panel.
> 
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> ---
>  .../display/panel/boe,tv101wum-nl6.txt        | 34 +++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
> new file mode 100644
> index 000000000000..bd44af636390
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
> @@ -0,0 +1,34 @@
> +Boe Corporation 10.1" WUXGA TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "boe,tv101wum-nl6"
> +- reg: the virtual channel number of a DSI peripheral
> +- enable-gpios: a GPIO spec for the enable pin
> +- pp1800-supply: core voltage supply
> +- avdd-supply: phandle of the regulator that provides positive voltage
> +- avee-supply: phandle of the regulator that provides negative voltage
> +- backlight: phandle of the backlight device attached to the panel
> +
> +The device node can contain one 'port' child node with one child
> +'endpoint' node, according to the bindings defined in
> +media/video-interfaces.txt. This node should describe panel's video bus.
> +
> +Example:
> +&dsi {
> +	...
> +	panel@0 {
> +		compatible = "boe,tv101wum-nl6";
> +		reg = <0>;
> +		enable-gpios = <&pio 45 0>;
> +		avdd-supply = <&ppvarn_lcd>;
> +		avee-supply = <&ppvarp_lcd>;
> +		pp1800-supply = <&pp1800_lcd>;
> +		backlight = <&backlight_lcd0>;
> +		status = "okay";
> +		port {
> +			panel_in: endpoint {
> +				remote-endpoint = <&dsi_out>;
> +			};
> +		};
> +	};
> +};
> -- 
> 2.21.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Rob Herring (Arm) July 22, 2019, 5:39 p.m. UTC | #2
On Wed, 26 Jun 2019 10:53:57 +0800, Jitao Shi wrote:
> Add documentation for boe tv101wum-n16 panel.
> 
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
>  .../display/panel/boe,tv101wum-nl6.txt        | 34 +++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Uwe Kleine-König July 22, 2019, 7:11 p.m. UTC | #3
$Subject ~= s/bindngs/bindings/

Best regards
Uwe
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
new file mode 100644
index 000000000000..bd44af636390
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
@@ -0,0 +1,34 @@ 
+Boe Corporation 10.1" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,tv101wum-nl6"
+- reg: the virtual channel number of a DSI peripheral
+- enable-gpios: a GPIO spec for the enable pin
+- pp1800-supply: core voltage supply
+- avdd-supply: phandle of the regulator that provides positive voltage
+- avee-supply: phandle of the regulator that provides negative voltage
+- backlight: phandle of the backlight device attached to the panel
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in
+media/video-interfaces.txt. This node should describe panel's video bus.
+
+Example:
+&dsi {
+	...
+	panel@0 {
+		compatible = "boe,tv101wum-nl6";
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		status = "okay";
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};