| Message ID | 20190621115602.17559-3-pawel.mikolaj.chmiel@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | power: supply: max8998-charger: Device Tree support | expand |
On Fri, 21 Jun 2019, Paweł Chmiel wrote: > This patch adds devicetree bindings documentation for > battery charging controller as the subnode of MAX8998 PMIC. It makes sense to place this in: Documentation/devicetree/bindings/power/supply/ And link to it from this file using the following syntax: See: ../power/supply/<file>.txt > Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> > --- > Changes from v3: > - Property prefix should be maxim, not max8998 > - Describe what End of Charge in percent means > > Changes from v2: > - Make charge-restart-level-microvolt optional. > - Make charge-timeout-hours optional. > > Changes from v1: > - Removed unneeded Fixes tag > - Correct description of all charger values > - Added missing property unit > --- > .../devicetree/bindings/mfd/max8998.txt | 26 +++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt > index 5f2f07c09c90..368f787d6079 100644 > --- a/Documentation/devicetree/bindings/mfd/max8998.txt > +++ b/Documentation/devicetree/bindings/mfd/max8998.txt > @@ -48,6 +48,25 @@ Additional properties required if max8998,pmic-buck2-dvs-gpio is defined: > - max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts > for buck2 regulator that can be selected using dvs gpio. > > +Charger: Configuration for battery charging controller should be added > +inside a child node named 'charger'. > + Required properties: > + - maxim,end-of-charge-percentage: End of Charge in percent. > + When the charge current in constant-voltage phase drops below > + end-of-charge-percentage of it's start value, charging is terminated. > + If value equals 0, leave it unchanged. Otherwise it should be value > + from 10 to 45 by 5 step. > + > + Optional properties: > + - maxim,charge-restart-threshold: Charge restart threshold in millivolts. > + If property is not present, this will be disabled. > + Valid values are: 0, 100, 150, 200. If the value equals 0, leave it > + unchanged. > + > + - maxim,charge-timeout: Charge timeout in hours. If property is not > + present, this will be disabled. Valid values are: 0, 5, 6, 7. > + If the value equals 0, leave it unchanged. > + > Regulators: All the regulators of MAX8998 to be instantiated shall be > listed in a child node named 'regulators'. Each regulator is represented > by a child node of the 'regulators' node. > @@ -97,6 +116,13 @@ Example: > max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */ > max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>; > > + /* Charger configuration */ > + charger { > + maxim,end-of-charge-percentage = <20>; > + maxim,charge-restart-threshold = <100>; > + maxim,charge-timeout = <7>; > + }; > + > /* Regulators to instantiate */ > regulators { > ldo2_reg: LDO2 {
On Fri, Jun 21, 2019 at 01:56:02PM +0200, Paweł Chmiel wrote: > This patch adds devicetree bindings documentation for > battery charging controller as the subnode of MAX8998 PMIC. > > Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> > --- > Changes from v3: > - Property prefix should be maxim, not max8998 > - Describe what End of Charge in percent means > > Changes from v2: > - Make charge-restart-level-microvolt optional. > - Make charge-timeout-hours optional. > > Changes from v1: > - Removed unneeded Fixes tag > - Correct description of all charger values > - Added missing property unit > --- > .../devicetree/bindings/mfd/max8998.txt | 26 +++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt > index 5f2f07c09c90..368f787d6079 100644 > --- a/Documentation/devicetree/bindings/mfd/max8998.txt > +++ b/Documentation/devicetree/bindings/mfd/max8998.txt > @@ -48,6 +48,25 @@ Additional properties required if max8998,pmic-buck2-dvs-gpio is defined: > - max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts > for buck2 regulator that can be selected using dvs gpio. > > +Charger: Configuration for battery charging controller should be added > +inside a child node named 'charger'. > + Required properties: > + - maxim,end-of-charge-percentage: End of Charge in percent. > + When the charge current in constant-voltage phase drops below > + end-of-charge-percentage of it's start value, charging is terminated. > + If value equals 0, leave it unchanged. Otherwise it should be value > + from 10 to 45 by 5 step. > + > + Optional properties: > + - maxim,charge-restart-threshold: Charge restart threshold in millivolts. > + If property is not present, this will be disabled. > + Valid values are: 0, 100, 150, 200. If the value equals 0, leave it > + unchanged. Needs a unit suffix as defined in property-units.txt. > + > + - maxim,charge-timeout: Charge timeout in hours. If property is not > + present, this will be disabled. Valid values are: 0, 5, 6, 7. > + If the value equals 0, leave it unchanged. Needs a unit suffix as defined in property-units.txt. > + > Regulators: All the regulators of MAX8998 to be instantiated shall be > listed in a child node named 'regulators'. Each regulator is represented > by a child node of the 'regulators' node. > @@ -97,6 +116,13 @@ Example: > max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */ > max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>; > > + /* Charger configuration */ > + charger { > + maxim,end-of-charge-percentage = <20>; > + maxim,charge-restart-threshold = <100>; > + maxim,charge-timeout = <7>; > + }; > + > /* Regulators to instantiate */ > regulators { > ldo2_reg: LDO2 { > -- > 2.17.1 >
diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt index 5f2f07c09c90..368f787d6079 100644 --- a/Documentation/devicetree/bindings/mfd/max8998.txt +++ b/Documentation/devicetree/bindings/mfd/max8998.txt @@ -48,6 +48,25 @@ Additional properties required if max8998,pmic-buck2-dvs-gpio is defined: - max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts for buck2 regulator that can be selected using dvs gpio. +Charger: Configuration for battery charging controller should be added +inside a child node named 'charger'. + Required properties: + - maxim,end-of-charge-percentage: End of Charge in percent. + When the charge current in constant-voltage phase drops below + end-of-charge-percentage of it's start value, charging is terminated. + If value equals 0, leave it unchanged. Otherwise it should be value + from 10 to 45 by 5 step. + + Optional properties: + - maxim,charge-restart-threshold: Charge restart threshold in millivolts. + If property is not present, this will be disabled. + Valid values are: 0, 100, 150, 200. If the value equals 0, leave it + unchanged. + + - maxim,charge-timeout: Charge timeout in hours. If property is not + present, this will be disabled. Valid values are: 0, 5, 6, 7. + If the value equals 0, leave it unchanged. + Regulators: All the regulators of MAX8998 to be instantiated shall be listed in a child node named 'regulators'. Each regulator is represented by a child node of the 'regulators' node. @@ -97,6 +116,13 @@ Example: max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */ max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>; + /* Charger configuration */ + charger { + maxim,end-of-charge-percentage = <20>; + maxim,charge-restart-threshold = <100>; + maxim,charge-timeout = <7>; + }; + /* Regulators to instantiate */ regulators { ldo2_reg: LDO2 {
This patch adds devicetree bindings documentation for battery charging controller as the subnode of MAX8998 PMIC. Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> --- Changes from v3: - Property prefix should be maxim, not max8998 - Describe what End of Charge in percent means Changes from v2: - Make charge-restart-level-microvolt optional. - Make charge-timeout-hours optional. Changes from v1: - Removed unneeded Fixes tag - Correct description of all charger values - Added missing property unit --- .../devicetree/bindings/mfd/max8998.txt | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+)