Message ID | 20190702094045.3652-2-frank-w@public-files.de (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | implement poweroff for mt6323/6397 | expand |
+Sean On Tue, 2019-07-02 at 11:40 +0200, Frank Wunderlich wrote: > From: Josef Friedl <josef.friedl@speed.at> > > poweroff for BPI-R2 > Suggested-by: Frank Wunderlich <frank-w@public-files.de> > > Signed-off-by: Josef Friedl <josef.friedl@speed.at> > --- > .../devicetree/bindings/mfd/mt6397.txt | 10 ++++++- > .../bindings/power/reset/mt6323-poweroff.txt | 20 +++++++++++++ > .../devicetree/bindings/rtc/rtc-mt6397.txt | 29 +++++++++++++++++++ > MAINTAINERS | 6 ++++ > 4 files changed, 64 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt > create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt > > diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt > index 0ebd08af777d..44acb9827716 100644 > --- a/Documentation/devicetree/bindings/mfd/mt6397.txt > +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt > @@ -8,6 +8,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules: > - Clock > - LED > - Keys > +- Power controller > > It is interfaced to host controller using SPI interface by a proprietary hardware > called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap. > @@ -22,8 +23,10 @@ compatible: "mediatek,mt6397" or "mediatek,mt6323" > Optional subnodes: > > - rtc > - Required properties: > + Required properties: Should be one of follows > + - compatible: "mediatek,mt6323-rtc" > - compatible: "mediatek,mt6397-rtc" > + For details, see Documentation/devicetree/bindings/rtc/rtc-mt6397.txt > - regulators > Required properties: > - compatible: "mediatek,mt6397-regulator" > @@ -46,6 +49,11 @@ Optional subnodes: > - compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys" > see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt > > +- power-controller > + Required properties: > + - compatible: "mediatek,mt6323-pwrc" > + For details, see Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt > + > Example: > pwrap: pwrap@1000f000 { > compatible = "mediatek,mt8135-pwrap"; > diff --git a/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt > new file mode 100644 > index 000000000000..933f0c48e887 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt > @@ -0,0 +1,20 @@ > +Device Tree Bindings for Power Controller on MediaTek PMIC > + > +The power controller which could be found on PMIC is responsible for externally > +powering off or on the remote MediaTek SoC through the circuit BBPU. > + > +Required properties: > +- compatible: Should be one of follows > + "mediatek,mt6323-pwrc": for MT6323 PMIC > + > +Example: > + > + pmic { > + compatible = "mediatek,mt6323"; > + > + ... > + > + power-controller { > + compatible = "mediatek,mt6323-pwrc"; > + }; > + } > diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt > new file mode 100644 > index 000000000000..ebd1cf80dcc8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt > @@ -0,0 +1,29 @@ > +Device-Tree bindings for MediaTek PMIC based RTC > + > +MediaTek PMIC based RTC is an independent function of MediaTek PMIC that works > +as a type of multi-function device (MFD). The RTC can be configured and set up > +with PMIC wrapper bus which is a common resource shared with the other > +functions found on the same PMIC. > + > +For MediaTek PMIC MFD bindings, see: > +Documentation/devicetree/bindings/mfd/mt6397.txt > + > +For MediaTek PMIC wrapper bus bindings, see: > +Documentation/devicetree/bindings/soc/mediatek/pwrap.txt > + > +Required properties: > +- compatible: Should be one of follows > + "mediatek,mt6323-rtc": for MT6323 PMIC > + "mediatek,mt6397-rtc": for MT6397 PMIC > + > +Example: > + > + pmic { > + compatible = "mediatek,mt6323"; > + > + ... > + > + rtc { > + compatible = "mediatek,mt6323-rtc"; > + }; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index 01a52fc964da..ec6ff342aa3c 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -9920,6 +9920,12 @@ S: Maintained > F: drivers/net/dsa/mt7530.* > F: net/dsa/tag_mtk.c > > +MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS > +M: Sean Wang <sean.wang@mediatek.com> > +L: linux-pm@vger.kernel.org > +S: Maintained > +F: Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt It's odd that there's no Sean's SOB tag in the series but add him in the entry. > MEDIATEK JPEG DRIVER > M: Rick Chang <rick.chang@mediatek.com> > M: Bin Liu <bin.liu@mediatek.com> > -- > 2.17.1 > > > _______________________________________________ > Linux-mediatek mailing list > Linux-mediatek@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-mediatek
On Tue, Jul 02, 2019 at 11:40:43AM +0200, Frank Wunderlich wrote: > From: Josef Friedl <josef.friedl@speed.at> > > poweroff for BPI-R2 > Suggested-by: Frank Wunderlich <frank-w@public-files.de> > > Signed-off-by: Josef Friedl <josef.friedl@speed.at> Hi Frank This needs you own Signed-off-by as well. Anybody who touches the patch, passes it upwards on the submitter/maintainer chain needs to add there own SOB. Andrew
On 02/07/2019 11:40, Frank Wunderlich wrote: > From: Josef Friedl <josef.friedl@speed.at> > > poweroff for BPI-R2 > Suggested-by: Frank Wunderlich <frank-w@public-files.de> > > Signed-off-by: Josef Friedl <josef.friedl@speed.at> > =2D-- Please provide a proper commit message. Also subject should be adjusted. Just have a look into the git log to see what prefix you should use. What's =2D-- ? > .../devicetree/bindings/mfd/mt6397.txt | 10 ++++++- > .../bindings/power/reset/mt6323-poweroff.txt | 20 +++++++++++++ > .../devicetree/bindings/rtc/rtc-mt6397.txt | 29 +++++++++++++++++++ > MAINTAINERS | 6 ++++ > 4 files changed, 64 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-p= > oweroff.txt > create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt > > diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentat= > ion/devicetree/bindings/mfd/mt6397.txt > index 0ebd08af777d..44acb9827716 100644 > =2D-- a/Documentation/devicetree/bindings/mfd/mt6397.txt > +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt > @@ -8,6 +8,7 @@ MT6397/MT6323 is a multifunction device with the following= > sub modules: > - Clock > - LED > - Keys > +- Power controller > > It is interfaced to host controller using SPI interface by a proprietary = > hardware > called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwra= > p. It seems you have some problems with enconding or word wrapping by your email setting. please check that. > @@ -22,8 +23,10 @@ compatible: "mediatek,mt6397" or "mediatek,mt6323" > Optional subnodes: > > - rtc > - Required properties: > + Required properties: Should be one of follows > + - compatible: "mediatek,mt6323-rtc" > - compatible: "mediatek,mt6397-rtc" > + For details, see Documentation/devicetree/bindings/rtc/rtc-mt6397.txt > - regulators > Required properties: > - compatible: "mediatek,mt6397-regulator" > @@ -46,6 +49,11 @@ Optional subnodes: > - compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys" > see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt > > +- power-controller > + Required properties: > + - compatible: "mediatek,mt6323-pwrc" > + For details, see Documentation/devicetree/bindings/power/reset/mt6323-po= > weroff.txt > + > Example: > pwrap: pwrap@1000f000 { > compatible =3D "mediatek,mt8135-pwrap"; > diff --git a/Documentation/devicetree/bindings/power/reset/mt6323-poweroff= > .txt b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt > new file mode 100644 > index 000000000000..933f0c48e887 > =2D-- /dev/null > +++ b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt > @@ -0,0 +1,20 @@ > +Device Tree Bindings for Power Controller on MediaTek PMIC > + > +The power controller which could be found on PMIC is responsible for exte= > rnally > +powering off or on the remote MediaTek SoC through the circuit BBPU. > + > +Required properties: > +- compatible: Should be one of follows > + "mediatek,mt6323-pwrc": for MT6323 PMIC > + > +Example: > + > + pmic { > + compatible =3D "mediatek,mt6323"; > + > + ... > + > + power-controller { > + compatible =3D "mediatek,mt6323-pwrc"; > + }; > + } > diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt b/Docume= > ntation/devicetree/bindings/rtc/rtc-mt6397.txt > new file mode 100644 > index 000000000000..ebd1cf80dcc8 > =2D-- /dev/null > +++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt > @@ -0,0 +1,29 @@ > +Device-Tree bindings for MediaTek PMIC based RTC > + > +MediaTek PMIC based RTC is an independent function of MediaTek PMIC that = > works > +as a type of multi-function device (MFD). The RTC can be configured and s= > et up > +with PMIC wrapper bus which is a common resource shared with the other > +functions found on the same PMIC. > + > +For MediaTek PMIC MFD bindings, see: > +Documentation/devicetree/bindings/mfd/mt6397.txt > + > +For MediaTek PMIC wrapper bus bindings, see: > +Documentation/devicetree/bindings/soc/mediatek/pwrap.txt In the end there is no difference between the mt6397 rtc and the mt7622-rtc, right? Please rename the binding document of mt7622 and add the compatible there. No need to add a new file. > + > +Required properties: > +- compatible: Should be one of follows > + "mediatek,mt6323-rtc": for MT6323 PMIC > + "mediatek,mt6397-rtc": for MT6397 PMIC > + > +Example: > + > + pmic { > + compatible =3D "mediatek,mt6323"; > + > + ... > + > + rtc { > + compatible =3D "mediatek,mt6323-rtc"; > + }; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index 01a52fc964da..ec6ff342aa3c 100644 > =2D-- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -9920,6 +9920,12 @@ S: Maintained > F: drivers/net/dsa/mt7530.* > F: net/dsa/tag_mtk.c > > +MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS > +M: Sean Wang <sean.wang@mediatek.com> > +L: linux-pm@vger.kernel.org > +S: Maintained > +F: Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt > + > MEDIATEK JPEG DRIVER > M: Rick Chang <rick.chang@mediatek.com> > M: Bin Liu <bin.liu@mediatek.com> > =2D- > 2.17.1 Maintainers entries are normally a seperate patch. Regards, Matthias >
diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt index 0ebd08af777d..44acb9827716 100644 --- a/Documentation/devicetree/bindings/mfd/mt6397.txt +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt @@ -8,6 +8,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules: - Clock - LED - Keys +- Power controller It is interfaced to host controller using SPI interface by a proprietary hardware called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap. @@ -22,8 +23,10 @@ compatible: "mediatek,mt6397" or "mediatek,mt6323" Optional subnodes: - rtc - Required properties: + Required properties: Should be one of follows + - compatible: "mediatek,mt6323-rtc" - compatible: "mediatek,mt6397-rtc" + For details, see Documentation/devicetree/bindings/rtc/rtc-mt6397.txt - regulators Required properties: - compatible: "mediatek,mt6397-regulator" @@ -46,6 +49,11 @@ Optional subnodes: - compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys" see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt +- power-controller + Required properties: + - compatible: "mediatek,mt6323-pwrc" + For details, see Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt + Example: pwrap: pwrap@1000f000 { compatible = "mediatek,mt8135-pwrap"; diff --git a/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt new file mode 100644 index 000000000000..933f0c48e887 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt @@ -0,0 +1,20 @@ +Device Tree Bindings for Power Controller on MediaTek PMIC + +The power controller which could be found on PMIC is responsible for externally +powering off or on the remote MediaTek SoC through the circuit BBPU. + +Required properties: +- compatible: Should be one of follows + "mediatek,mt6323-pwrc": for MT6323 PMIC + +Example: + + pmic { + compatible = "mediatek,mt6323"; + + ... + + power-controller { + compatible = "mediatek,mt6323-pwrc"; + }; + } diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt new file mode 100644 index 000000000000..ebd1cf80dcc8 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt @@ -0,0 +1,29 @@ +Device-Tree bindings for MediaTek PMIC based RTC + +MediaTek PMIC based RTC is an independent function of MediaTek PMIC that works +as a type of multi-function device (MFD). The RTC can be configured and set up +with PMIC wrapper bus which is a common resource shared with the other +functions found on the same PMIC. + +For MediaTek PMIC MFD bindings, see: +Documentation/devicetree/bindings/mfd/mt6397.txt + +For MediaTek PMIC wrapper bus bindings, see: +Documentation/devicetree/bindings/soc/mediatek/pwrap.txt + +Required properties: +- compatible: Should be one of follows + "mediatek,mt6323-rtc": for MT6323 PMIC + "mediatek,mt6397-rtc": for MT6397 PMIC + +Example: + + pmic { + compatible = "mediatek,mt6323"; + + ... + + rtc { + compatible = "mediatek,mt6323-rtc"; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 01a52fc964da..ec6ff342aa3c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9920,6 +9920,12 @@ S: Maintained F: drivers/net/dsa/mt7530.* F: net/dsa/tag_mtk.c +MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS +M: Sean Wang <sean.wang@mediatek.com> +L: linux-pm@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt + MEDIATEK JPEG DRIVER M: Rick Chang <rick.chang@mediatek.com> M: Bin Liu <bin.liu@mediatek.com>