mbox series

[v2,0/8] pinctrl: aspeed: Preparation for AST2600

Message ID 20190628023838.15426-1-andrew@aj.id.au (mailing list archive)
Headers show
Series pinctrl: aspeed: Preparation for AST2600 | expand

Message

Andrew Jeffery June 28, 2019, 2:38 a.m. UTC 
Hello!

The ASPEED AST2600 is in the pipeline, and we have enough information to start
preparing to upstream support for it. This series lays some ground work;
splitting the bindings and dicing the implementation up a little further to
facilitate differences between the 2600 and previous SoC generations.

v2 addresses Rob's comments on the bindings conversion patches. v1 can be found
here:

https://www.spinics.net/lists/linux-gpio/msg40157.html

Please review!

Andrew

Andrew Jeffery (8):
  dt-bindings: pinctrl: aspeed: Split bindings document in two
  dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
  dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
  MAINTAINERS: Add entry for ASPEED pinctrl drivers
  pinctrl: aspeed: Correct comment that is no longer true
  pinctrl: aspeed: Clarify comment about strapping W1C
  pinctrl: aspeed: Split out pinmux from general pinctrl
  pinctrl: aspeed: Add implementation-related documentation

 .../pinctrl/aspeed,ast2400-pinctrl.yaml       |  81 ++
 .../pinctrl/aspeed,ast2500-pinctrl.yaml       | 134 ++++
 .../bindings/pinctrl/pinctrl-aspeed.txt       | 172 ----
 MAINTAINERS                                   |   9 +
 drivers/pinctrl/aspeed/Makefile               |   2 +-
 drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c    |  94 ++-
 drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c    | 123 ++-
 drivers/pinctrl/aspeed/pinctrl-aspeed.c       | 250 +-----
 drivers/pinctrl/aspeed/pinctrl-aspeed.h       | 549 +------------
 drivers/pinctrl/aspeed/pinmux-aspeed.c        |  96 +++
 drivers/pinctrl/aspeed/pinmux-aspeed.h        | 735 ++++++++++++++++++
 11 files changed, 1312 insertions(+), 933 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
 create mode 100644 drivers/pinctrl/aspeed/pinmux-aspeed.c
 create mode 100644 drivers/pinctrl/aspeed/pinmux-aspeed.h

Comments

Linus Walleij July 3, 2019, 8:40 a.m. UTC | #1 
Hi Andrew,

On Fri, Jun 28, 2019 at 4:39 AM Andrew Jeffery <andrew@aj.id.au> wrote:
>
> Hello!
>
> The ASPEED AST2600 is in the pipeline, and we have enough information to start
> preparing to upstream support for it. This series lays some ground work;
> splitting the bindings and dicing the implementation up a little further to
> facilitate differences between the 2600 and previous SoC generations.
>
> v2 addresses Rob's comments on the bindings conversion patches. v1 can be found
> here:

I have applied this series, I had to strip some changes of the header
because it was based on some SPDX cleanups upstream but no
big deal I think. Check the result please.

Yours,
Linus Walleij
Andrew Jeffery July 4, 2019, 12:28 a.m. UTC | #2 
On Wed, 3 Jul 2019, at 18:40, Linus Walleij wrote:
> Hi Andrew,
> 
> On Fri, Jun 28, 2019 at 4:39 AM Andrew Jeffery <andrew@aj.id.au> wrote:
> >
> > Hello!
> >
> > The ASPEED AST2600 is in the pipeline, and we have enough information to start
> > preparing to upstream support for it. This series lays some ground work;
> > splitting the bindings and dicing the implementation up a little further to
> > facilitate differences between the 2600 and previous SoC generations.
> >
> > v2 addresses Rob's comments on the bindings conversion patches. v1 can be found
> > here:
> 
> I have applied this series, I had to strip some changes of the header
> because it was based on some SPDX cleanups upstream but no
> big deal I think. Check the result please.

Thanks. Have you pushed the branch yet? I just fetched your pinctrl tree
and can't see the patches.

Andrew