diff mbox series

drm/dp/dsc: Add Support for all BPCs supported by TGL

Message ID 20190710230921.21015-1-anusha.srivatsa@intel.com (mailing list archive)
State New, archived
Headers show
Series drm/dp/dsc: Add Support for all BPCs supported by TGL | expand

Commit Message

Srivatsa, Anusha July 10, 2019, 11:09 p.m. UTC 
DSC engine on ICL supports only 8 and 10 BPC as the input
BPC. But DSC engine in TGL supports 8, 10 and 12 BPC.
Add 12 BPC support for DSC while calculating compression
configuration.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

Comments

Ville Syrjälä July 11, 2019, 1:47 p.m. UTC | #1 
On Wed, Jul 10, 2019 at 04:09:21PM -0700, Anusha Srivatsa wrote:
> DSC engine on ICL supports only 8 and 10 BPC as the input
> BPC. But DSC engine in TGL supports 8, 10 and 12 BPC.
> Add 12 BPC support for DSC while calculating compression
> configuration.
> 
> Cc: Manasi Navare <manasi.d.navare@intel.com>
> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dp.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 0bdb7ecc5a81..cd089643c80d 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -71,6 +71,7 @@
>  #define DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER	61440
>  #define DP_DSC_MIN_SUPPORTED_BPC		8
>  #define DP_DSC_MAX_SUPPORTED_BPC		10
> +#define TGL_DP_DSC_MAX_SUPPORTED_BPC		12

These defines aren't doing any good IMO. I'd just nuke them.

>  
>  /* DP DSC throughput values used for slice count calculations KPixels/s */
>  #define DP_DSC_PEAK_PIXEL_RATE			2720000
> @@ -1911,8 +1912,12 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
>  	if (!intel_dp_supports_dsc(intel_dp, pipe_config))
>  		return -EINVAL;
>  
> -	dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
> -			    conn_state->max_requested_bpc);
> +	if (INTEL_GEN(dev_priv) > 11)

More customarily >= 12

> +		dsc_max_bpc = min_t(u8, TGL_DP_DSC_MAX_SUPPORTED_BPC,
> +				    conn_state->max_requested_bpc);
> +	else
> +		dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
> +				    conn_state->max_requested_bpc);
>  
>  	pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, dsc_max_bpc);
>  	if (pipe_bpp < DP_DSC_MIN_SUPPORTED_BPC * 3) {
> -- 
> 2.21.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Navare, Manasi July 11, 2019, 5:24 p.m. UTC | #2 
On Thu, Jul 11, 2019 at 04:47:17PM +0300, Ville Syrjälä wrote:
> On Wed, Jul 10, 2019 at 04:09:21PM -0700, Anusha Srivatsa wrote:
> > DSC engine on ICL supports only 8 and 10 BPC as the input
> > BPC. But DSC engine in TGL supports 8, 10 and 12 BPC.
> > Add 12 BPC support for DSC while calculating compression
> > configuration.
> > 
> > Cc: Manasi Navare <manasi.d.navare@intel.com>
> > Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/intel_dp.c | 9 +++++++--
> >  1 file changed, 7 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > index 0bdb7ecc5a81..cd089643c80d 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -71,6 +71,7 @@
> >  #define DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER	61440
> >  #define DP_DSC_MIN_SUPPORTED_BPC		8
> >  #define DP_DSC_MAX_SUPPORTED_BPC		10
> > +#define TGL_DP_DSC_MAX_SUPPORTED_BPC		12
> 
> These defines aren't doing any good IMO. I'd just nuke them.

So just remove all the #defines and use the values directly?

> 
> >  
> >  /* DP DSC throughput values used for slice count calculations KPixels/s */
> >  #define DP_DSC_PEAK_PIXEL_RATE			2720000
> > @@ -1911,8 +1912,12 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> >  	if (!intel_dp_supports_dsc(intel_dp, pipe_config))
> >  		return -EINVAL;
> >  
> > -	dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
> > -			    conn_state->max_requested_bpc);
> > +	if (INTEL_GEN(dev_priv) > 11)
> 
> More customarily >= 12

I agree

Manasi

> 
> > +		dsc_max_bpc = min_t(u8, TGL_DP_DSC_MAX_SUPPORTED_BPC,
> > +				    conn_state->max_requested_bpc);
> > +	else
> > +		dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
> > +				    conn_state->max_requested_bpc);
> >  
> >  	pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, dsc_max_bpc);
> >  	if (pipe_bpp < DP_DSC_MIN_SUPPORTED_BPC * 3) {
> > -- 
> > 2.21.0
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> -- 
> Ville Syrjälä
> Intel
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Srivatsa, Anusha July 12, 2019, 5:29 p.m. UTC | #3 
>-----Original Message-----
>From: Navare, Manasi D
>Sent: Thursday, July 11, 2019 10:24 AM
>To: Ville Syrjälä <ville.syrjala@linux.intel.com>
>Cc: Srivatsa, Anusha <anusha.srivatsa@intel.com>; intel-
>gfx@lists.freedesktop.org
>Subject: Re: [Intel-gfx] [PATCH] drm/dp/dsc: Add Support for all BPCs supported
>by TGL
>
>On Thu, Jul 11, 2019 at 04:47:17PM +0300, Ville Syrjälä wrote:
>> On Wed, Jul 10, 2019 at 04:09:21PM -0700, Anusha Srivatsa wrote:
>> > DSC engine on ICL supports only 8 and 10 BPC as the input BPC. But
>> > DSC engine in TGL supports 8, 10 and 12 BPC.
>> > Add 12 BPC support for DSC while calculating compression
>> > configuration.
>> >
>> > Cc: Manasi Navare <manasi.d.navare@intel.com>
>> > Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
>> > ---
>> >  drivers/gpu/drm/i915/display/intel_dp.c | 9 +++++++--
>> >  1 file changed, 7 insertions(+), 2 deletions(-)
>> >
>> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
>> > b/drivers/gpu/drm/i915/display/intel_dp.c
>> > index 0bdb7ecc5a81..cd089643c80d 100644
>> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
>> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
>> > @@ -71,6 +71,7 @@
>> >  #define DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER	61440
>> >  #define DP_DSC_MIN_SUPPORTED_BPC		8
>> >  #define DP_DSC_MAX_SUPPORTED_BPC		10
>> > +#define TGL_DP_DSC_MAX_SUPPORTED_BPC		12
>>
>> These defines aren't doing any good IMO. I'd just nuke them.
>
>So just remove all the #defines and use the values directly?

Wont it make it less readable?

>>
>> >
>> >  /* DP DSC throughput values used for slice count calculations KPixels/s */
>> >  #define DP_DSC_PEAK_PIXEL_RATE			2720000
>> > @@ -1911,8 +1912,12 @@ static int intel_dp_dsc_compute_config(struct
>intel_dp *intel_dp,
>> >  	if (!intel_dp_supports_dsc(intel_dp, pipe_config))
>> >  		return -EINVAL;
>> >
>> > -	dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
>> > -			    conn_state->max_requested_bpc);
>> > +	if (INTEL_GEN(dev_priv) > 11)
>>
>> More customarily >= 12
>
>I agree

Makes sense.

Anusha 
>Manasi
>
>>
>> > +		dsc_max_bpc = min_t(u8, TGL_DP_DSC_MAX_SUPPORTED_BPC,
>> > +				    conn_state->max_requested_bpc);
>> > +	else
>> > +		dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
>> > +				    conn_state->max_requested_bpc);
>> >
>> >  	pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, dsc_max_bpc);
>> >  	if (pipe_bpp < DP_DSC_MIN_SUPPORTED_BPC * 3) {
>> > --
>> > 2.21.0
>> >
>> > _______________________________________________
>> > Intel-gfx mailing list
>> > Intel-gfx@lists.freedesktop.org
>> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>>
>> --
>> Ville Syrjälä
>> Intel
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Ville Syrjälä July 12, 2019, 5:34 p.m. UTC | #4 
On Fri, Jul 12, 2019 at 05:29:16PM +0000, Srivatsa, Anusha wrote:
> 
> 
> >-----Original Message-----
> >From: Navare, Manasi D
> >Sent: Thursday, July 11, 2019 10:24 AM
> >To: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >Cc: Srivatsa, Anusha <anusha.srivatsa@intel.com>; intel-
> >gfx@lists.freedesktop.org
> >Subject: Re: [Intel-gfx] [PATCH] drm/dp/dsc: Add Support for all BPCs supported
> >by TGL
> >
> >On Thu, Jul 11, 2019 at 04:47:17PM +0300, Ville Syrjälä wrote:
> >> On Wed, Jul 10, 2019 at 04:09:21PM -0700, Anusha Srivatsa wrote:
> >> > DSC engine on ICL supports only 8 and 10 BPC as the input BPC. But
> >> > DSC engine in TGL supports 8, 10 and 12 BPC.
> >> > Add 12 BPC support for DSC while calculating compression
> >> > configuration.
> >> >
> >> > Cc: Manasi Navare <manasi.d.navare@intel.com>
> >> > Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
> >> > ---
> >> >  drivers/gpu/drm/i915/display/intel_dp.c | 9 +++++++--
> >> >  1 file changed, 7 insertions(+), 2 deletions(-)
> >> >
> >> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> >> > b/drivers/gpu/drm/i915/display/intel_dp.c
> >> > index 0bdb7ecc5a81..cd089643c80d 100644
> >> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> >> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> >> > @@ -71,6 +71,7 @@
> >> >  #define DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER	61440
> >> >  #define DP_DSC_MIN_SUPPORTED_BPC		8
> >> >  #define DP_DSC_MAX_SUPPORTED_BPC		10
> >> > +#define TGL_DP_DSC_MAX_SUPPORTED_BPC		12
> >>
> >> These defines aren't doing any good IMO. I'd just nuke them.
> >
> >So just remove all the #defines and use the values directly?
> 
> Wont it make it less readable?

It will be more readable because you don't have to go looking for those
defines.

> 
> >>
> >> >
> >> >  /* DP DSC throughput values used for slice count calculations KPixels/s */
> >> >  #define DP_DSC_PEAK_PIXEL_RATE			2720000
> >> > @@ -1911,8 +1912,12 @@ static int intel_dp_dsc_compute_config(struct
> >intel_dp *intel_dp,
> >> >  	if (!intel_dp_supports_dsc(intel_dp, pipe_config))
> >> >  		return -EINVAL;
> >> >
> >> > -	dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
> >> > -			    conn_state->max_requested_bpc);
> >> > +	if (INTEL_GEN(dev_priv) > 11)
> >>
> >> More customarily >= 12
> >
> >I agree
> 
> Makes sense.
> 
> Anusha 
> >Manasi
> >
> >>
> >> > +		dsc_max_bpc = min_t(u8, TGL_DP_DSC_MAX_SUPPORTED_BPC,
> >> > +				    conn_state->max_requested_bpc);
> >> > +	else
> >> > +		dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
> >> > +				    conn_state->max_requested_bpc);
> >> >
> >> >  	pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, dsc_max_bpc);
> >> >  	if (pipe_bpp < DP_DSC_MIN_SUPPORTED_BPC * 3) {
> >> > --
> >> > 2.21.0
> >> >
> >> > _______________________________________________
> >> > Intel-gfx mailing list
> >> > Intel-gfx@lists.freedesktop.org
> >> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> >>
> >> --
> >> Ville Syrjälä
> >> Intel
> >> _______________________________________________
> >> Intel-gfx mailing list
> >> Intel-gfx@lists.freedesktop.org
> >> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Srivatsa, Anusha July 12, 2019, 6:11 p.m. UTC | #5 
>-----Original Message-----
>From: Ville Syrjälä [mailto:ville.syrjala@linux.intel.com]
>Sent: Friday, July 12, 2019 10:34 AM
>To: Srivatsa, Anusha <anusha.srivatsa@intel.com>
>Cc: Navare, Manasi D <manasi.d.navare@intel.com>; intel-
>gfx@lists.freedesktop.org
>Subject: Re: [Intel-gfx] [PATCH] drm/dp/dsc: Add Support for all BPCs supported
>by TGL
>
>On Fri, Jul 12, 2019 at 05:29:16PM +0000, Srivatsa, Anusha wrote:
>>
>>
>> >-----Original Message-----
>> >From: Navare, Manasi D
>> >Sent: Thursday, July 11, 2019 10:24 AM
>> >To: Ville Syrjälä <ville.syrjala@linux.intel.com>
>> >Cc: Srivatsa, Anusha <anusha.srivatsa@intel.com>; intel-
>> >gfx@lists.freedesktop.org
>> >Subject: Re: [Intel-gfx] [PATCH] drm/dp/dsc: Add Support for all BPCs
>> >supported by TGL
>> >
>> >On Thu, Jul 11, 2019 at 04:47:17PM +0300, Ville Syrjälä wrote:
>> >> On Wed, Jul 10, 2019 at 04:09:21PM -0700, Anusha Srivatsa wrote:
>> >> > DSC engine on ICL supports only 8 and 10 BPC as the input BPC.
>> >> > But DSC engine in TGL supports 8, 10 and 12 BPC.
>> >> > Add 12 BPC support for DSC while calculating compression
>> >> > configuration.
>> >> >
>> >> > Cc: Manasi Navare <manasi.d.navare@intel.com>
>> >> > Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
>> >> > ---
>> >> >  drivers/gpu/drm/i915/display/intel_dp.c | 9 +++++++--
>> >> >  1 file changed, 7 insertions(+), 2 deletions(-)
>> >> >
>> >> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
>> >> > b/drivers/gpu/drm/i915/display/intel_dp.c
>> >> > index 0bdb7ecc5a81..cd089643c80d 100644
>> >> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
>> >> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
>> >> > @@ -71,6 +71,7 @@
>> >> >  #define DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER	61440
>> >> >  #define DP_DSC_MIN_SUPPORTED_BPC		8
>> >> >  #define DP_DSC_MAX_SUPPORTED_BPC		10
>> >> > +#define TGL_DP_DSC_MAX_SUPPORTED_BPC		12
>> >>
>> >> These defines aren't doing any good IMO. I'd just nuke them.
>> >
>> >So just remove all the #defines and use the values directly?
>>
>> Wont it make it less readable?
>
>It will be more readable because you don't have to go looking for those defines.
Ok. Then remove all #defines like Manasi pointed out?

Anusha 
>>
>> >>
>> >> >
>> >> >  /* DP DSC throughput values used for slice count calculations KPixels/s */
>> >> >  #define DP_DSC_PEAK_PIXEL_RATE			2720000
>> >> > @@ -1911,8 +1912,12 @@ static int
>> >> > intel_dp_dsc_compute_config(struct
>> >intel_dp *intel_dp,
>> >> >  	if (!intel_dp_supports_dsc(intel_dp, pipe_config))
>> >> >  		return -EINVAL;
>> >> >
>> >> > -	dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
>> >> > -			    conn_state->max_requested_bpc);
>> >> > +	if (INTEL_GEN(dev_priv) > 11)
>> >>
>> >> More customarily >= 12
>> >
>> >I agree
>>
>> Makes sense.
>>
>> Anusha
>> >Manasi
>> >
>> >>
>> >> > +		dsc_max_bpc = min_t(u8, TGL_DP_DSC_MAX_SUPPORTED_BPC,
>> >> > +				    conn_state->max_requested_bpc);
>> >> > +	else
>> >> > +		dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
>> >> > +				    conn_state->max_requested_bpc);
>> >> >
>> >> >  	pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, dsc_max_bpc);
>> >> >  	if (pipe_bpp < DP_DSC_MIN_SUPPORTED_BPC * 3) {
>> >> > --
>> >> > 2.21.0
>> >> >
>> >> > _______________________________________________
>> >> > Intel-gfx mailing list
>> >> > Intel-gfx@lists.freedesktop.org
>> >> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>> >>
>> >> --
>> >> Ville Syrjälä
>> >> Intel
>> >> _______________________________________________
>> >> Intel-gfx mailing list
>> >> Intel-gfx@lists.freedesktop.org
>> >> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
>--
>Ville Syrjälä
>Intel
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 0bdb7ecc5a81..cd089643c80d 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -71,6 +71,7 @@ 
 #define DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER	61440
 #define DP_DSC_MIN_SUPPORTED_BPC		8
 #define DP_DSC_MAX_SUPPORTED_BPC		10
+#define TGL_DP_DSC_MAX_SUPPORTED_BPC		12
 
 /* DP DSC throughput values used for slice count calculations KPixels/s */
 #define DP_DSC_PEAK_PIXEL_RATE			2720000
@@ -1911,8 +1912,12 @@  static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
 	if (!intel_dp_supports_dsc(intel_dp, pipe_config))
 		return -EINVAL;
 
-	dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
-			    conn_state->max_requested_bpc);
+	if (INTEL_GEN(dev_priv) > 11)
+		dsc_max_bpc = min_t(u8, TGL_DP_DSC_MAX_SUPPORTED_BPC,
+				    conn_state->max_requested_bpc);
+	else
+		dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
+				    conn_state->max_requested_bpc);
 
 	pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, dsc_max_bpc);
 	if (pipe_bpp < DP_DSC_MIN_SUPPORTED_BPC * 3) {