diff mbox series

[3/3] media: mtk-cir: lower de-glitch counter for rc-mm protocol

Message ID 20190712224700.11285-3-sean@mess.org (mailing list archive)
State New, archived
Headers show
Series [1/3] media: mtk-cir: only allow protocols that have software decoders | expand

Commit Message

Sean Young July 12, 2019, 10:47 p.m. UTC
The rc-mm protocol can't be decoded by the mtk-cir since the de-glitch
filter removes pulses/spaces shorter than 294 microseconds.

Tested on a BananaPi R2.

Signed-off-by: Sean Young <sean@mess.org>
---
 drivers/media/rc/mtk-cir.c | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Sean Wang July 14, 2019, 7 a.m. UTC | #1
On Fri, Jul 12, 2019 at 3:47 PM Sean Young <sean@mess.org> wrote:
>
> The rc-mm protocol can't be decoded by the mtk-cir since the de-glitch
> filter removes pulses/spaces shorter than 294 microseconds.
>
> Tested on a BananaPi R2.

Thanks for grabbing the board and do the test voluntarily.

>
> Signed-off-by: Sean Young <sean@mess.org>

Acked-by: Sean Wang <sean.wang@kernel.org>

> ---
>  drivers/media/rc/mtk-cir.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/drivers/media/rc/mtk-cir.c b/drivers/media/rc/mtk-cir.c
> index 9dc467ebae24..8027181de985 100644
> --- a/drivers/media/rc/mtk-cir.c
> +++ b/drivers/media/rc/mtk-cir.c
> @@ -35,6 +35,11 @@
>  /* Fields containing pulse width data */
>  #define MTK_WIDTH_MASK           (GENMASK(7, 0))
>
> +/* IR threshold */
> +#define MTK_IRTHD               0x14
> +#define MTK_DG_CNT_MASK                 (GENMASK(12, 8))
> +#define MTK_DG_CNT(x)           ((x) << 8)
> +
>  /* Bit to enable interrupt */
>  #define MTK_IRINT_EN             BIT(0)
>
> @@ -400,6 +405,9 @@ static int mtk_ir_probe(struct platform_device *pdev)
>         mtk_w32_mask(ir, val, ir->data->fields[MTK_HW_PERIOD].mask,
>                      ir->data->fields[MTK_HW_PERIOD].reg);
>
> +       /* Set de-glitch counter */
> +       mtk_w32_mask(ir, MTK_DG_CNT(1), MTK_DG_CNT_MASK, MTK_IRTHD);
> +
>         /* Enable IR and PWM */
>         val = mtk_r32(ir, MTK_CONFIG_HIGH_REG);
>         val |= MTK_OK_COUNT(ir->data->ok_count) |  MTK_PWM_EN | MTK_IR_EN;
> --
> 2.21.0
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
diff mbox series

Patch

diff --git a/drivers/media/rc/mtk-cir.c b/drivers/media/rc/mtk-cir.c
index 9dc467ebae24..8027181de985 100644
--- a/drivers/media/rc/mtk-cir.c
+++ b/drivers/media/rc/mtk-cir.c
@@ -35,6 +35,11 @@ 
 /* Fields containing pulse width data */
 #define MTK_WIDTH_MASK		  (GENMASK(7, 0))
 
+/* IR threshold */
+#define MTK_IRTHD		 0x14
+#define MTK_DG_CNT_MASK		 (GENMASK(12, 8))
+#define MTK_DG_CNT(x)		 ((x) << 8)
+
 /* Bit to enable interrupt */
 #define MTK_IRINT_EN		  BIT(0)
 
@@ -400,6 +405,9 @@  static int mtk_ir_probe(struct platform_device *pdev)
 	mtk_w32_mask(ir, val, ir->data->fields[MTK_HW_PERIOD].mask,
 		     ir->data->fields[MTK_HW_PERIOD].reg);
 
+	/* Set de-glitch counter */
+	mtk_w32_mask(ir, MTK_DG_CNT(1), MTK_DG_CNT_MASK, MTK_IRTHD);
+
 	/* Enable IR and PWM */
 	val = mtk_r32(ir, MTK_CONFIG_HIGH_REG);
 	val |= MTK_OK_COUNT(ir->data->ok_count) |  MTK_PWM_EN | MTK_IR_EN;