diff mbox series

[v4,3/4] media: venus: Update to bitrate based clock scaling

Message ID 1562078787-516-4-git-send-email-amasule@codeaurora.org (mailing list archive)
State Superseded, archived
Headers show
Series media: venus: Update clock scaling and core selection | expand

Commit Message

Aniket Masule July 2, 2019, 2:46 p.m. UTC
Introduced clock scaling using bitrate, preavious
calculations consider only the cycles per mb.
Also, clock scaling is now triggered before every
buffer being queued to the device. This helps in
deciding precise clock cycles required.

Signed-off-by: Aniket Masule <amasule@codeaurora.org>
---
 drivers/media/platform/qcom/venus/helpers.c | 31 +++++++++++++++++++++++++----
 1 file changed, 27 insertions(+), 4 deletions(-)

Comments

Stanimir Varbanov July 15, 2019, 3:58 p.m. UTC | #1
Hi,

On 7/2/19 5:46 PM, Aniket Masule wrote:
> Introduced clock scaling using bitrate, preavious
> calculations consider only the cycles per mb.
> Also, clock scaling is now triggered before every
> buffer being queued to the device. This helps in
> deciding precise clock cycles required.
> 
> Signed-off-by: Aniket Masule <amasule@codeaurora.org>
> ---
>  drivers/media/platform/qcom/venus/helpers.c | 31 +++++++++++++++++++++++++----
>  1 file changed, 27 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/media/platform/qcom/venus/helpers.c b/drivers/media/platform/qcom/venus/helpers.c
> index 2c976e4..5726d86 100644
> --- a/drivers/media/platform/qcom/venus/helpers.c
> +++ b/drivers/media/platform/qcom/venus/helpers.c
> @@ -399,17 +399,26 @@ static int scale_clocks(struct venus_inst *inst)
>  	return ret;
>  }
>  
> -static unsigned long calculate_vpp_freq(struct venus_inst *inst)
> +static unsigned long calculate_inst_freq(struct venus_inst *inst,
> +					 unsigned long filled_len)
>  {
> -	unsigned long vpp_freq = 0;
> +	unsigned long vpp_freq = 0, vsp_freq = 0;
> +	u64 fps = inst->fps;
>  	u32 mbs_per_sec;
>  
>  	mbs_per_sec = load_per_instance(inst);
>  	vpp_freq = mbs_per_sec * inst->clk_data.codec_freq_data->vpp_freq;
>  	/* 21 / 20 is overhead factor */
>  	vpp_freq += vpp_freq / 20;
> +	vsp_freq = mbs_per_sec * inst->clk_data.codec_freq_data->vsp_freq;
>  
> -	return vpp_freq;
> +	/* 10 / 7 is overhead factor */
> +	if (inst->session_type == VIDC_SESSION_TYPE_ENC)
> +		vsp_freq += (inst->controls.enc.bitrate * 10) / 7;
> +	else
> +		vsp_freq += ((fps * filled_len * 8) * 10) / 7;
> +
> +	return max(vpp_freq, vsp_freq);
>  }
>  
>  static int scale_clocks_v4(struct venus_inst *inst)
> @@ -417,13 +426,27 @@ static int scale_clocks_v4(struct venus_inst *inst)
>  	struct venus_core *core = inst->core;
>  	const struct freq_tbl *table = core->res->freq_tbl;
>  	unsigned int num_rows = core->res->freq_tbl_size;
> +	struct v4l2_m2m_ctx *m2m_ctx = inst->m2m_ctx;
>  	struct clk *clk = core->clks[0];
>  	struct device *dev = core->dev;
>  	unsigned int i;
>  	unsigned long freq = 0, freq_core1 = 0, freq_core2 = 0;
> +	unsigned long filled_len = 0;
> +	struct venus_buffer *buf, *n;
> +	struct vb2_buffer *vb;
>  	int ret;
>  
> -	freq = calculate_vpp_freq(inst);
> +	mutex_lock(&inst->lock);
> +	v4l2_m2m_for_each_src_buf_safe(m2m_ctx, buf, n) {
> +		vb = &buf->vb.vb2_buf;
> +		filled_len = max(filled_len, vb2_get_plane_payload(vb, 0));
> +	}
> +	mutex_unlock(&inst->lock);
> +
> +	if (inst->session_type == VIDC_SESSION_TYPE_DEC && !filled_len)
> +		return 0;
> +
> +	freq = calculate_inst_freq(inst, filled_len);
>  
>  	if (freq > table[0].freq)
>  		dev_warn(dev, "HW is overloaded, needed: %lu max: %lu\n",
> 

The original patch has a call to load_scale_clocks from
venus_helper_vb2_buf_queue, why it is not included here?
Aniket Masule July 16, 2019, 4:46 a.m. UTC | #2
Hi,

On 2019-07-15 21:28, Stanimir Varbanov wrote:
> Hi,
> 
> On 7/2/19 5:46 PM, Aniket Masule wrote:
>> Introduced clock scaling using bitrate, preavious
>> calculations consider only the cycles per mb.
>> Also, clock scaling is now triggered before every
>> buffer being queued to the device. This helps in
>> deciding precise clock cycles required.
>> 
>> Signed-off-by: Aniket Masule <amasule@codeaurora.org>
>> ---
>>  drivers/media/platform/qcom/venus/helpers.c | 31 
>> +++++++++++++++++++++++++----
>>  1 file changed, 27 insertions(+), 4 deletions(-)
>> 
>> diff --git a/drivers/media/platform/qcom/venus/helpers.c 
>> b/drivers/media/platform/qcom/venus/helpers.c
>> index 2c976e4..5726d86 100644
>> --- a/drivers/media/platform/qcom/venus/helpers.c
>> +++ b/drivers/media/platform/qcom/venus/helpers.c
>> @@ -399,17 +399,26 @@ static int scale_clocks(struct venus_inst *inst)
>>  	return ret;
>>  }
>> 
>> -static unsigned long calculate_vpp_freq(struct venus_inst *inst)
>> +static unsigned long calculate_inst_freq(struct venus_inst *inst,
>> +					 unsigned long filled_len)
>>  {
>> -	unsigned long vpp_freq = 0;
>> +	unsigned long vpp_freq = 0, vsp_freq = 0;
>> +	u64 fps = inst->fps;
>>  	u32 mbs_per_sec;
>> 
>>  	mbs_per_sec = load_per_instance(inst);
>>  	vpp_freq = mbs_per_sec * inst->clk_data.codec_freq_data->vpp_freq;
>>  	/* 21 / 20 is overhead factor */
>>  	vpp_freq += vpp_freq / 20;
>> +	vsp_freq = mbs_per_sec * inst->clk_data.codec_freq_data->vsp_freq;
>> 
>> -	return vpp_freq;
>> +	/* 10 / 7 is overhead factor */
>> +	if (inst->session_type == VIDC_SESSION_TYPE_ENC)
>> +		vsp_freq += (inst->controls.enc.bitrate * 10) / 7;
>> +	else
>> +		vsp_freq += ((fps * filled_len * 8) * 10) / 7;
>> +
>> +	return max(vpp_freq, vsp_freq);
>>  }
>> 
>>  static int scale_clocks_v4(struct venus_inst *inst)
>> @@ -417,13 +426,27 @@ static int scale_clocks_v4(struct venus_inst 
>> *inst)
>>  	struct venus_core *core = inst->core;
>>  	const struct freq_tbl *table = core->res->freq_tbl;
>>  	unsigned int num_rows = core->res->freq_tbl_size;
>> +	struct v4l2_m2m_ctx *m2m_ctx = inst->m2m_ctx;
>>  	struct clk *clk = core->clks[0];
>>  	struct device *dev = core->dev;
>>  	unsigned int i;
>>  	unsigned long freq = 0, freq_core1 = 0, freq_core2 = 0;
>> +	unsigned long filled_len = 0;
>> +	struct venus_buffer *buf, *n;
>> +	struct vb2_buffer *vb;
>>  	int ret;
>> 
>> -	freq = calculate_vpp_freq(inst);
>> +	mutex_lock(&inst->lock);
>> +	v4l2_m2m_for_each_src_buf_safe(m2m_ctx, buf, n) {
>> +		vb = &buf->vb.vb2_buf;
>> +		filled_len = max(filled_len, vb2_get_plane_payload(vb, 0));
>> +	}
>> +	mutex_unlock(&inst->lock);
>> +
>> +	if (inst->session_type == VIDC_SESSION_TYPE_DEC && !filled_len)
>> +		return 0;
>> +
>> +	freq = calculate_inst_freq(inst, filled_len);
>> 
>>  	if (freq > table[0].freq)
>>  		dev_warn(dev, "HW is overloaded, needed: %lu max: %lu\n",
>> 
> 
> The original patch has a call to load_scale_clocks from
> venus_helper_vb2_buf_queue, why it is not included here?

Yes, I need to include it for before every buffer being queued to the 
device
to have accurate precise clock.

Regards,
Aniket
diff mbox series

Patch

diff --git a/drivers/media/platform/qcom/venus/helpers.c b/drivers/media/platform/qcom/venus/helpers.c
index 2c976e4..5726d86 100644
--- a/drivers/media/platform/qcom/venus/helpers.c
+++ b/drivers/media/platform/qcom/venus/helpers.c
@@ -399,17 +399,26 @@  static int scale_clocks(struct venus_inst *inst)
 	return ret;
 }
 
-static unsigned long calculate_vpp_freq(struct venus_inst *inst)
+static unsigned long calculate_inst_freq(struct venus_inst *inst,
+					 unsigned long filled_len)
 {
-	unsigned long vpp_freq = 0;
+	unsigned long vpp_freq = 0, vsp_freq = 0;
+	u64 fps = inst->fps;
 	u32 mbs_per_sec;
 
 	mbs_per_sec = load_per_instance(inst);
 	vpp_freq = mbs_per_sec * inst->clk_data.codec_freq_data->vpp_freq;
 	/* 21 / 20 is overhead factor */
 	vpp_freq += vpp_freq / 20;
+	vsp_freq = mbs_per_sec * inst->clk_data.codec_freq_data->vsp_freq;
 
-	return vpp_freq;
+	/* 10 / 7 is overhead factor */
+	if (inst->session_type == VIDC_SESSION_TYPE_ENC)
+		vsp_freq += (inst->controls.enc.bitrate * 10) / 7;
+	else
+		vsp_freq += ((fps * filled_len * 8) * 10) / 7;
+
+	return max(vpp_freq, vsp_freq);
 }
 
 static int scale_clocks_v4(struct venus_inst *inst)
@@ -417,13 +426,27 @@  static int scale_clocks_v4(struct venus_inst *inst)
 	struct venus_core *core = inst->core;
 	const struct freq_tbl *table = core->res->freq_tbl;
 	unsigned int num_rows = core->res->freq_tbl_size;
+	struct v4l2_m2m_ctx *m2m_ctx = inst->m2m_ctx;
 	struct clk *clk = core->clks[0];
 	struct device *dev = core->dev;
 	unsigned int i;
 	unsigned long freq = 0, freq_core1 = 0, freq_core2 = 0;
+	unsigned long filled_len = 0;
+	struct venus_buffer *buf, *n;
+	struct vb2_buffer *vb;
 	int ret;
 
-	freq = calculate_vpp_freq(inst);
+	mutex_lock(&inst->lock);
+	v4l2_m2m_for_each_src_buf_safe(m2m_ctx, buf, n) {
+		vb = &buf->vb.vb2_buf;
+		filled_len = max(filled_len, vb2_get_plane_payload(vb, 0));
+	}
+	mutex_unlock(&inst->lock);
+
+	if (inst->session_type == VIDC_SESSION_TYPE_DEC && !filled_len)
+		return 0;
+
+	freq = calculate_inst_freq(inst, filled_len);
 
 	if (freq > table[0].freq)
 		dev_warn(dev, "HW is overloaded, needed: %lu max: %lu\n",