diff mbox series

[v2,4/4] dt-bindings: devfreq: exynos-bus: remove unused property

Message ID 20190715120416.3561-5-k.konieczny@partner.samsung.com (mailing list archive)
State Accepted
Delegated to: Chanwoo Choi
Headers show
Series [v2,1/4] opp: core: add regulators enable and disable | expand

Commit Message

Kamil Konieczny July 15, 2019, 12:04 p.m. UTC
Remove unused DT property "exynos,voltage-tolerance".

Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
---
 Documentation/devicetree/bindings/devfreq/exynos-bus.txt | 2 --
 1 file changed, 2 deletions(-)

Comments

Chanwoo Choi July 16, 2019, 8:54 a.m. UTC | #1
Hi,

On 19. 7. 15. 오후 9:04, Kamil Konieczny wrote:
> Remove unused DT property "exynos,voltage-tolerance".
> 
> Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
> ---
>  Documentation/devicetree/bindings/devfreq/exynos-bus.txt | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
> index f8e946471a58..e71f752cc18f 100644
> --- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
> +++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
> @@ -50,8 +50,6 @@ Required properties only for passive bus device:
>  Optional properties only for parent bus device:
>  - exynos,saturation-ratio: the percentage value which is used to calibrate
>  			the performance count against total cycle count.
> -- exynos,voltage-tolerance: the percentage value for bus voltage tolerance
> -			which is used to calculate the max voltage.
>  
>  Detailed correlation between sub-blocks and power line according to Exynos SoC:
>  - In case of Exynos3250, there are two power line as following:
> 

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
index f8e946471a58..e71f752cc18f 100644
--- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
+++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
@@ -50,8 +50,6 @@  Required properties only for passive bus device:
 Optional properties only for parent bus device:
 - exynos,saturation-ratio: the percentage value which is used to calibrate
 			the performance count against total cycle count.
-- exynos,voltage-tolerance: the percentage value for bus voltage tolerance
-			which is used to calculate the max voltage.
 
 Detailed correlation between sub-blocks and power line according to Exynos SoC:
 - In case of Exynos3250, there are two power line as following: