| Message ID | 20190712064206.48249-1-ran.wang_1@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [V2,1/2] usb: dwc3: Add node to update cache type setting | expand |
On Fri, Jul 12, 2019 at 02:42:05PM +0800, Ran Wang wrote: > Some Layerscape paltforms (such as LS1088A, LS2088A, etc) encounter USB > detect failues when adding dma-coherent to DWC3 node. This is because the > HW default cache type configuration of those SoC are not right, need to > be updated in DTS. > > Signed-off-by: Ran Wang <ran.wang_1@nxp.com> > --- > Change in v2: > - New file. > > Documentation/devicetree/bindings/usb/dwc3.txt | 43 ++++++++++++++++++++++++++ > 1 file changed, 43 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt > index 8e5265e..7bc1cef 100644 > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > @@ -110,6 +110,43 @@ Optional properties: > - in addition all properties from usb-xhci.txt from the current directory are > supported as well > > +* Cache type nodes (optional) > + > +The Cache type node is used to tell how to configure cache type on 4 different > +transfer types: Data Read, Desc Read, Data Write and Desc write. For each > +treasfer type, controller has a 4-bit register field to enable different cache > +type. Quoted from DWC3 data book Table 6-5 Cache Type Bit Assignments: > +---------------------------------------------------------------- > +MBUS_TYPE| bit[3] |bit[2] |bit[1] |bit[0] > +---------------------------------------------------------------- > +AHB |Cacheable |Bufferable |Privilegge |Data > +AXI3 |Write Allocate|Read Allocate|Cacheable |Bufferable > +AXI4 |Allocate Other|Allocate |Modifiable |Bufferable > +AXI4 |Other Allocate|Allocate |Modifiable |Bufferable > +Native |Same as AXI |Same as AXI |Same as AXI|Same as AXI > +---------------------------------------------------------------- > +Note: The AHB, AXI3, AXI4, and PCIe busses use different names for certain > +signals, which have the same meaning: > + Bufferable = Posted > + Cacheable = Modifiable = Snoop (negation of No Snoop) This should all be implied from the SoC specific compatible strings. Rob
Hi Rob, On Thursday, July 25, 2019 04:42 Rob Herring <robh@kernel.org> wrote: > > On Fri, Jul 12, 2019 at 02:42:05PM +0800, Ran Wang wrote: > > Some Layerscape paltforms (such as LS1088A, LS2088A, etc) encounter > > USB detect failues when adding dma-coherent to DWC3 node. This is > > because the HW default cache type configuration of those SoC are not > > right, need to be updated in DTS. > > > > Signed-off-by: Ran Wang <ran.wang_1@nxp.com> > > --- > > Change in v2: > > - New file. > > > > Documentation/devicetree/bindings/usb/dwc3.txt | 43 > > ++++++++++++++++++++++++++ > > 1 file changed, 43 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt > > b/Documentation/devicetree/bindings/usb/dwc3.txt > > index 8e5265e..7bc1cef 100644 > > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > > @@ -110,6 +110,43 @@ Optional properties: > > - in addition all properties from usb-xhci.txt from the current directory are > > supported as well > > > > +* Cache type nodes (optional) > > + > > +The Cache type node is used to tell how to configure cache type on 4 > > +different transfer types: Data Read, Desc Read, Data Write and Desc > > +write. For each treasfer type, controller has a 4-bit register field > > +to enable different cache type. Quoted from DWC3 data book Table 6-5 > Cache Type Bit Assignments: > > +---------------------------------------------------------------- > > +MBUS_TYPE| bit[3] |bit[2] |bit[1] |bit[0] > > +---------------------------------------------------------------- > > +AHB |Cacheable |Bufferable |Privilegge |Data > > +AXI3 |Write Allocate|Read Allocate|Cacheable |Bufferable > > +AXI4 |Allocate Other|Allocate |Modifiable |Bufferable > > +AXI4 |Other Allocate|Allocate |Modifiable |Bufferable > > +Native |Same as AXI |Same as AXI |Same as AXI|Same as AXI > > +---------------------------------------------------------------- > > +Note: The AHB, AXI3, AXI4, and PCIe busses use different names for > > +certain signals, which have the same meaning: > > + Bufferable = Posted > > + Cacheable = Modifiable = Snoop (negation of No Snoop) > > This should all be implied from the SoC specific compatible strings. Did you mean I could implement a soc driver which can be matched by compatible of 'fsl,ls1088a-dwc3' which will pass known bus type to DWC3 driver? If yes, how to pass? Or I need to add a property snps,mbus_type="AXI3" to DWC3 node, which will co-work with property transfer_type-datard = "cacheable" to set cache type properly? Thanks & Regards, Ran
On Wed, Jul 24, 2019 at 8:29 PM Ran Wang <ran.wang_1@nxp.com> wrote: > > Hi Rob, > > On Thursday, July 25, 2019 04:42 Rob Herring <robh@kernel.org> wrote: > > > > On Fri, Jul 12, 2019 at 02:42:05PM +0800, Ran Wang wrote: > > > Some Layerscape paltforms (such as LS1088A, LS2088A, etc) encounter > > > USB detect failues when adding dma-coherent to DWC3 node. This is > > > because the HW default cache type configuration of those SoC are not > > > right, need to be updated in DTS. > > > > > > Signed-off-by: Ran Wang <ran.wang_1@nxp.com> > > > --- > > > Change in v2: > > > - New file. > > > > > > Documentation/devicetree/bindings/usb/dwc3.txt | 43 > > > ++++++++++++++++++++++++++ > > > 1 file changed, 43 insertions(+) > > > > > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt > > > b/Documentation/devicetree/bindings/usb/dwc3.txt > > > index 8e5265e..7bc1cef 100644 > > > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > > > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > > > @@ -110,6 +110,43 @@ Optional properties: > > > - in addition all properties from usb-xhci.txt from the current directory are > > > supported as well > > > > > > +* Cache type nodes (optional) > > > + > > > +The Cache type node is used to tell how to configure cache type on 4 > > > +different transfer types: Data Read, Desc Read, Data Write and Desc > > > +write. For each treasfer type, controller has a 4-bit register field > > > +to enable different cache type. Quoted from DWC3 data book Table 6-5 > > Cache Type Bit Assignments: > > > +---------------------------------------------------------------- > > > +MBUS_TYPE| bit[3] |bit[2] |bit[1] |bit[0] > > > +---------------------------------------------------------------- > > > +AHB |Cacheable |Bufferable |Privilegge |Data > > > +AXI3 |Write Allocate|Read Allocate|Cacheable |Bufferable > > > +AXI4 |Allocate Other|Allocate |Modifiable |Bufferable > > > +AXI4 |Other Allocate|Allocate |Modifiable |Bufferable > > > +Native |Same as AXI |Same as AXI |Same as AXI|Same as AXI > > > +---------------------------------------------------------------- > > > +Note: The AHB, AXI3, AXI4, and PCIe busses use different names for > > > +certain signals, which have the same meaning: > > > + Bufferable = Posted > > > + Cacheable = Modifiable = Snoop (negation of No Snoop) > > > > This should all be implied from the SoC specific compatible strings. > > Did you mean I could implement a soc driver which can be matched by compatible of 'fsl,ls1088a-dwc3' which will pass known bus type to DWC3 driver? If yes, how to pass? Yes. The DT match table can have data associated with that compatible string. Beyond that, I'm not really familiar with the DWC3 driver. Rob
Hi Felipe, On Friday, July 26, 2019 05:56, Rob Herring <robh@kernel.org> wrote: > > On Wed, Jul 24, 2019 at 8:29 PM Ran Wang <ran.wang_1@nxp.com> wrote: > > > > Hi Rob, > > > > On Thursday, July 25, 2019 04:42 Rob Herring <robh@kernel.org> wrote: > > > > > > On Fri, Jul 12, 2019 at 02:42:05PM +0800, Ran Wang wrote: > > > > Some Layerscape paltforms (such as LS1088A, LS2088A, etc) > > > > encounter USB detect failues when adding dma-coherent to DWC3 > > > > node. This is because the HW default cache type configuration of > > > > those SoC are not right, need to be updated in DTS. > > > > > > > > Signed-off-by: Ran Wang <ran.wang_1@nxp.com> > > > > --- > > > > Change in v2: > > > > - New file. > > > > > > > > Documentation/devicetree/bindings/usb/dwc3.txt | 43 > > > > ++++++++++++++++++++++++++ > > > > 1 file changed, 43 insertions(+) > > > > > > > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt > > > > b/Documentation/devicetree/bindings/usb/dwc3.txt > > > > index 8e5265e..7bc1cef 100644 > > > > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > > > > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > > > > @@ -110,6 +110,43 @@ Optional properties: > > > > - in addition all properties from usb-xhci.txt from the current directory are > > > > supported as well > > > > > > > > +* Cache type nodes (optional) > > > > + > > > > +The Cache type node is used to tell how to configure cache type > > > > +on 4 different transfer types: Data Read, Desc Read, Data Write > > > > +and Desc write. For each treasfer type, controller has a 4-bit > > > > +register field to enable different cache type. Quoted from DWC3 > > > > +data book Table 6-5 > > > Cache Type Bit Assignments: > > > > +---------------------------------------------------------------- > > > > +MBUS_TYPE| bit[3] |bit[2] |bit[1] |bit[0] > > > > +---------------------------------------------------------------- > > > > +AHB |Cacheable |Bufferable |Privilegge |Data > > > > +AXI3 |Write Allocate|Read Allocate|Cacheable |Bufferable > > > > +AXI4 |Allocate Other|Allocate |Modifiable |Bufferable > > > > +AXI4 |Other Allocate|Allocate |Modifiable |Bufferable > > > > +Native |Same as AXI |Same as AXI |Same as AXI|Same as AXI > > > > +---------------------------------------------------------------- > > > > +Note: The AHB, AXI3, AXI4, and PCIe busses use different names > > > > +for certain signals, which have the same meaning: > > > > + Bufferable = Posted > > > > + Cacheable = Modifiable = Snoop (negation of No Snoop) > > > > > > This should all be implied from the SoC specific compatible strings. > > > > Did you mean I could implement a soc driver which can be matched by > compatible of 'fsl,ls1088a-dwc3' which will pass known bus type to DWC3 driver? > If yes, how to pass? > > Yes. The DT match table can have data associated with that compatible string. > Beyond that, I'm not really familiar with the DWC3 driver. Do you have any suggestion here? If I add a glue driver on DWC3 core driver (I know you are not happy on this way), I don't know how to pass the MBUS_TYPE info. from my glue driver to DWC3 core driver (I think cache type related programming should be done by DWC3 core driver, am I right?) Thanks Ran
Hi Felipe On Friday, July 26, 2019 11:30 Ran Wang wrote: > > Hi Felipe, > > On Friday, July 26, 2019 05:56, Rob Herring <robh@kernel.org> wrote: > > > > On Wed, Jul 24, 2019 at 8:29 PM Ran Wang <ran.wang_1@nxp.com> wrote: > > > > > > Hi Rob, > > > > > > On Thursday, July 25, 2019 04:42 Rob Herring <robh@kernel.org> wrote: > > > > > > > > On Fri, Jul 12, 2019 at 02:42:05PM +0800, Ran Wang wrote: > > > > > Some Layerscape paltforms (such as LS1088A, LS2088A, etc) > > > > > encounter USB detect failues when adding dma-coherent to DWC3 > > > > > node. This is because the HW default cache type configuration of > > > > > those SoC are not right, need to be updated in DTS. > > > > > > > > > > Signed-off-by: Ran Wang <ran.wang_1@nxp.com> > > > > > --- > > > > > Change in v2: > > > > > - New file. > > > > > > > > > > Documentation/devicetree/bindings/usb/dwc3.txt | 43 > > > > > ++++++++++++++++++++++++++ > > > > > 1 file changed, 43 insertions(+) > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt > > > > > b/Documentation/devicetree/bindings/usb/dwc3.txt > > > > > index 8e5265e..7bc1cef 100644 > > > > > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > > > > > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > > > > > @@ -110,6 +110,43 @@ Optional properties: > > > > > - in addition all properties from usb-xhci.txt from the current directory > are > > > > > supported as well > > > > > > > > > > +* Cache type nodes (optional) > > > > > + > > > > > +The Cache type node is used to tell how to configure cache type > > > > > +on 4 different transfer types: Data Read, Desc Read, Data Write > > > > > +and Desc write. For each treasfer type, controller has a 4-bit > > > > > +register field to enable different cache type. Quoted from DWC3 > > > > > +data book Table 6-5 > > > > Cache Type Bit Assignments: > > > > > +---------------------------------------------------------------- > > > > > +MBUS_TYPE| bit[3] |bit[2] |bit[1] |bit[0] > > > > > +---------------------------------------------------------------- > > > > > +AHB |Cacheable |Bufferable |Privilegge |Data > > > > > +AXI3 |Write Allocate|Read Allocate|Cacheable |Bufferable > > > > > +AXI4 |Allocate Other|Allocate |Modifiable |Bufferable > > > > > +AXI4 |Other Allocate|Allocate |Modifiable |Bufferable > > > > > +Native |Same as AXI |Same as AXI |Same as AXI|Same as AXI > > > > > +--------------------------------------------------------------- > > > > > +- > > > > > +Note: The AHB, AXI3, AXI4, and PCIe busses use different names > > > > > +for certain signals, which have the same meaning: > > > > > + Bufferable = Posted > > > > > + Cacheable = Modifiable = Snoop (negation of No Snoop) > > > > > > > > This should all be implied from the SoC specific compatible strings. > > > > > > Did you mean I could implement a soc driver which can be matched by > > compatible of 'fsl,ls1088a-dwc3' which will pass known bus type to DWC3 > driver? > > If yes, how to pass? > > > > Yes. The DT match table can have data associated with that compatible string. > > Beyond that, I'm not really familiar with the DWC3 driver. > > Do you have any suggestion here? > If I add a glue driver on DWC3 core driver (I know you are not happy on this way), > I don't know how to pass the MBUS_TYPE info. from my glue driver to DWC3 > core driver (I think cache type related programming should be done by DWC3 > core driver, am I right?) Or I add SoC specific handling code in DWC3 driver to do this cache type setting according to SoC specific compatible strings (such as compatible = "fsl,ls1088a-dwc3", "snps,dwc3";) ? I know that so far DWC3 driver doesn't have any SoC specific handling code, this might be the first one. Any comment or suggestion are welcome, thanks. Regards, Ran
On Thu, Jul 25, 2019 at 4:56 PM Rob Herring <robh@kernel.org> wrote: > > On Wed, Jul 24, 2019 at 8:29 PM Ran Wang <ran.wang_1@nxp.com> wrote: > > > > Hi Rob, > > > > On Thursday, July 25, 2019 04:42 Rob Herring <robh@kernel.org> wrote: > > > > > > On Fri, Jul 12, 2019 at 02:42:05PM +0800, Ran Wang wrote: > > > > Some Layerscape paltforms (such as LS1088A, LS2088A, etc) encounter > > > > USB detect failues when adding dma-coherent to DWC3 node. This is > > > > because the HW default cache type configuration of those SoC are not > > > > right, need to be updated in DTS. > > > > > > > > Signed-off-by: Ran Wang <ran.wang_1@nxp.com> > > > > --- > > > > Change in v2: > > > > - New file. > > > > > > > > Documentation/devicetree/bindings/usb/dwc3.txt | 43 > > > > ++++++++++++++++++++++++++ > > > > 1 file changed, 43 insertions(+) > > > > > > > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt > > > > b/Documentation/devicetree/bindings/usb/dwc3.txt > > > > index 8e5265e..7bc1cef 100644 > > > > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > > > > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > > > > @@ -110,6 +110,43 @@ Optional properties: > > > > - in addition all properties from usb-xhci.txt from the current directory are > > > > supported as well > > > > > > > > +* Cache type nodes (optional) > > > > + > > > > +The Cache type node is used to tell how to configure cache type on 4 > > > > +different transfer types: Data Read, Desc Read, Data Write and Desc > > > > +write. For each treasfer type, controller has a 4-bit register field > > > > +to enable different cache type. Quoted from DWC3 data book Table 6-5 > > > Cache Type Bit Assignments: > > > > +---------------------------------------------------------------- > > > > +MBUS_TYPE| bit[3] |bit[2] |bit[1] |bit[0] > > > > +---------------------------------------------------------------- > > > > +AHB |Cacheable |Bufferable |Privilegge |Data > > > > +AXI3 |Write Allocate|Read Allocate|Cacheable |Bufferable > > > > +AXI4 |Allocate Other|Allocate |Modifiable |Bufferable > > > > +AXI4 |Other Allocate|Allocate |Modifiable |Bufferable > > > > +Native |Same as AXI |Same as AXI |Same as AXI|Same as AXI > > > > +---------------------------------------------------------------- > > > > +Note: The AHB, AXI3, AXI4, and PCIe busses use different names for > > > > +certain signals, which have the same meaning: > > > > + Bufferable = Posted > > > > + Cacheable = Modifiable = Snoop (negation of No Snoop) > > > > > > This should all be implied from the SoC specific compatible strings. > > > > Did you mean I could implement a soc driver which can be matched by compatible of 'fsl,ls1088a-dwc3' which will pass known bus type to DWC3 driver? If yes, how to pass? > > Yes. The DT match table can have data associated with that compatible > string. Beyond that, I'm not really familiar with the DWC3 driver. Hi Rob, It looks like that the current dwc3 binding perfers to define general quirks in device tree properties instead of trying to rely on the compatible string to determine quirks. In this case, can we keep following the existing preference instead of choosing the other way? Regards, Leo
Hi Rob, Felipe, On Tuesday, September 24, 2019 00:38, Yang Li wrote: > > On Thu, Jul 25, 2019 at 4:56 PM Rob Herring <robh@kernel.org> wrote: > > > > On Wed, Jul 24, 2019 at 8:29 PM Ran Wang <ran.wang_1@nxp.com> wrote: > > > > > > Hi Rob, > > > > > > On Thursday, July 25, 2019 04:42 Rob Herring <robh@kernel.org> wrote: > > > > > > > > On Fri, Jul 12, 2019 at 02:42:05PM +0800, Ran Wang wrote: > > > > > Some Layerscape paltforms (such as LS1088A, LS2088A, etc) > > > > > encounter USB detect failues when adding dma-coherent to DWC3 > > > > > node. This is because the HW default cache type configuration of > > > > > those SoC are not right, need to be updated in DTS. > > > > > > > > > > Signed-off-by: Ran Wang <ran.wang_1@nxp.com> > > > > > --- > > > > > Change in v2: > > > > > - New file. > > > > > > > > > > Documentation/devicetree/bindings/usb/dwc3.txt | 43 > > > > > ++++++++++++++++++++++++++ > > > > > 1 file changed, 43 insertions(+) > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt > > > > > b/Documentation/devicetree/bindings/usb/dwc3.txt > > > > > index 8e5265e..7bc1cef 100644 > > > > > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > > > > > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > > > > > @@ -110,6 +110,43 @@ Optional properties: > > > > > - in addition all properties from usb-xhci.txt from the current directory > are > > > > > supported as well > > > > > > > > > > +* Cache type nodes (optional) > > > > > + > > > > > +The Cache type node is used to tell how to configure cache type > > > > > +on 4 different transfer types: Data Read, Desc Read, Data Write > > > > > +and Desc write. For each treasfer type, controller has a 4-bit > > > > > +register field to enable different cache type. Quoted from DWC3 > > > > > +data book Table 6-5 > > > > Cache Type Bit Assignments: > > > > > +---------------------------------------------------------------- > > > > > +MBUS_TYPE| bit[3] |bit[2] |bit[1] |bit[0] > > > > > +---------------------------------------------------------------- > > > > > +AHB |Cacheable |Bufferable |Privilegge |Data > > > > > +AXI3 |Write Allocate|Read Allocate|Cacheable |Bufferable > > > > > +AXI4 |Allocate Other|Allocate |Modifiable |Bufferable > > > > > +AXI4 |Other Allocate|Allocate |Modifiable |Bufferable > > > > > +Native |Same as AXI |Same as AXI |Same as AXI|Same as AXI > > > > > +--------------------------------------------------------------- > > > > > +- > > > > > +Note: The AHB, AXI3, AXI4, and PCIe busses use different names > > > > > +for certain signals, which have the same meaning: > > > > > + Bufferable = Posted > > > > > + Cacheable = Modifiable = Snoop (negation of No Snoop) > > > > > > > > This should all be implied from the SoC specific compatible strings. > > > > > > Did you mean I could implement a soc driver which can be matched by > compatible of 'fsl,ls1088a-dwc3' which will pass known bus type to DWC3 driver? > If yes, how to pass? > > > > Yes. The DT match table can have data associated with that compatible > > string. Beyond that, I'm not really familiar with the DWC3 driver. > > Hi Rob, > > It looks like that the current dwc3 binding perfers to define general quirks in > device tree properties instead of trying to rely on the compatible string to > determine quirks. In this case, can we keep following the existing preference > instead of choosing the other way? Looks like you have different opinions on this solution, so I 'd like to have all opens get settled here to help me find a acceptable solution for both of you. Please let me explain more about this: 1. This feature (configure cache type) is natively from DWC3 IP (we can find it from data book), not a SoC specific feature (more details please see v1 discussion: https://lore.kernel.org/patchwork/patch/851306/) 2. However, in most SoC, the HW default setting looks fine (no need driver help), but some case (like Layerscape) might need driver to do some programming to fix USB no detect issue. That's why I implement this patch. 3. For now, Rob think this should be handled by SoC specific code rather than adding a property to control it (by DWC3 core driver). And Felipe prefer to avoid using glue diver. So I am not sure how to meet this requirements at the same time. Any further suggestion are really appreciated. Thank you. Regards, Ran
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 8e5265e..7bc1cef 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -110,6 +110,43 @@ Optional properties: - in addition all properties from usb-xhci.txt from the current directory are supported as well +* Cache type nodes (optional) + +The Cache type node is used to tell how to configure cache type on 4 different +transfer types: Data Read, Desc Read, Data Write and Desc write. For each +treasfer type, controller has a 4-bit register field to enable different cache +type. Quoted from DWC3 data book Table 6-5 Cache Type Bit Assignments: +---------------------------------------------------------------- +MBUS_TYPE| bit[3] |bit[2] |bit[1] |bit[0] +---------------------------------------------------------------- +AHB |Cacheable |Bufferable |Privilegge |Data +AXI3 |Write Allocate|Read Allocate|Cacheable |Bufferable +AXI4 |Allocate Other|Allocate |Modifiable |Bufferable +AXI4 |Other Allocate|Allocate |Modifiable |Bufferable +Native |Same as AXI |Same as AXI |Same as AXI|Same as AXI +---------------------------------------------------------------- +Note: The AHB, AXI3, AXI4, and PCIe busses use different names for certain +signals, which have the same meaning: + Bufferable = Posted + Cacheable = Modifiable = Snoop (negation of No Snoop) + +In most cases, this node is not required unless the default values of related +registers are not correct *and* DWC3 node has enabled dma-coherent. So far we +have observed USB device detect failure on some Layerscape platforms if this +programming is not conducted properly. + +Required properties: +- transfer_type_datard: A value for 4-bit register which decide cache type of + Data Read transfer. According to above table, we can know that different + master bus type will cause different definition of cache type control bit. So + developer need to know which master bus type his platforms are using in + advance, then decide the value for this transfer type. +- transfer_type_descrd: A value for 4-bit register which decide cache type of + Desc Read transfer. +- transfer_type_datawr: A value for 4-bit register which decide cache type of + Data Write transfer. +- transfer_type_descwr: A value for 4-bit register which decide cache type of + Desc Write transfer. This is usually a subnode to DWC3 glue to which it is connected. @@ -119,4 +156,10 @@ dwc3@4a030000 { interrupts = <0 92 4> usb-phy = <&usb2_phy>, <&usb3,phy>; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + cache_type: cache_type { + transfer_type_datard = <0x2>; + transfer_type_descrd = <0x2>; + transfer_type_datawr = <0x2>; + transfer_type_descwr = <0x2>; + }; };
Some Layerscape paltforms (such as LS1088A, LS2088A, etc) encounter USB detect failues when adding dma-coherent to DWC3 node. This is because the HW default cache type configuration of those SoC are not right, need to be updated in DTS. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> --- Change in v2: - New file. Documentation/devicetree/bindings/usb/dwc3.txt | 43 ++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)