diff mbox series

[02/11] MIPS: qi_lb60: Migrate to devicetree

Message ID 20190725220215.460-3-paul@crapouillou.net (mailing list archive)
State Not Applicable
Headers show
Series JZ4740 SoC cleanup | expand

Commit Message

Paul Cercueil July 25, 2019, 10:02 p.m. UTC 
Move all the platform data to devicetree.

The only bit dropped is the PWM beeper, which requires the PWM driver
to be updated. I figured it's okay to remove it here since it's really
a non-critical device, and it'll be re-introduced soon enough.

The other change is the CS line of the SPI is now set as active low. The
SPI core would have forced "active low" anyway, unless the 'spi-cs-high'
property is set.

In the process of moving to devicetree, we also switched to new drivers:
- We use the simple-audio-card and simple-amplifier drivers instead of
  the custom ASoC code;
- We use the new Ingenic DRM driver coupled with the GiantPlus GPM940B0
  DRM panel driver instead of the old framebuffer driver;
- We use the new jz4780-dma driver instead of the old jz4740-dma one;
- We use the ingenic-nand and jz4740-ecc drivers instead of the old
  jz4740-nand driver;
- We use ingenic-battery instead of jz4740-battery;
- We use iio-hwmon instead of jz4740-hwmon;
- We use ingenic-iio instead of the old jz4740-adc MFD driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---
 arch/mips/boot/dts/ingenic/qi_lb60.dts | 295 ++++++++++++++-
 arch/mips/jz4740/Makefile              |   4 -
 arch/mips/jz4740/board-qi_lb60.c       | 491 -------------------------
 3 files changed, 294 insertions(+), 496 deletions(-)
 delete mode 100644 arch/mips/jz4740/board-qi_lb60.c

Comments

Paul Burton July 25, 2019, 11:47 p.m. UTC | #1 
Hi Paul,

On Thu, Jul 25, 2019 at 06:02:06PM -0400, Paul Cercueil wrote:
> Move all the platform data to devicetree.

Nice! :)

> The only bit dropped is the PWM beeper, which requires the PWM driver
> to be updated. I figured it's okay to remove it here since it's really
> a non-critical device, and it'll be re-introduced soon enough.

OK, I can see that being a price worth paying. Though it's possible to
include the binding at least for that in this series I'd be even
happier. Actually I see we already have

  Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt

in mainline - what needs to change with it?

> +	spi {
> +		compatible = "spi-gpio";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		sck-gpios = <&gpc 23 GPIO_ACTIVE_HIGH>;
> +		mosi-gpios = <&gpc 22 GPIO_ACTIVE_HIGH>;
> +		cs-gpios = <&gpc 21 GPIO_ACTIVE_LOW>;
> +		num-chipselects = <1>;
> +
> +		spi@0 {
> +			compatible = "ili8960";

Should this be "ilitek,ili8960"?

Is there a binding & driver for this submitted somewhere? If not then do
we need this at all? It doesn't look like the existing platform data
would actually lead to a driver being loaded so I'm wondering if we can
just drop this until such a driver (or at least a documented DT binding)
exists.

Thanks,
    Paul
Paul Cercueil July 26, 2019, 12:09 a.m. UTC | #2 
Le jeu. 25 juil. 2019 à 19:47, Paul Burton <paul.burton@mips.com> a 
écrit :
> Hi Paul,
> 
> On Thu, Jul 25, 2019 at 06:02:06PM -0400, Paul Cercueil wrote:
>>  Move all the platform data to devicetree.
> 
> Nice! :)
> 
>>  The only bit dropped is the PWM beeper, which requires the PWM 
>> driver
>>  to be updated. I figured it's okay to remove it here since it's 
>> really
>>  a non-critical device, and it'll be re-introduced soon enough.
> 
> OK, I can see that being a price worth paying. Though it's possible to
> include the binding at least for that in this series I'd be even
> happier. Actually I see we already have
> 
>   Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt
> 
> in mainline - what needs to change with it?

The PWM driver will be updated to use the TCU clocks and the regmap 
provided
by the TCU driver. The PWM node will be a sub-node of the TCU one.

Additionally, there is this[1] ongoing discussion about PWM which makes
me uneasy about how to write the binding. So I'd rather not rush it,
because once the devicetree is written, it's ABI.

[1]: https://lkml.org/lkml/2019/5/22/607


>>  +	spi {
>>  +		compatible = "spi-gpio";
>>  +		#address-cells = <1>;
>>  +		#size-cells = <0>;
>>  +
>>  +		sck-gpios = <&gpc 23 GPIO_ACTIVE_HIGH>;
>>  +		mosi-gpios = <&gpc 22 GPIO_ACTIVE_HIGH>;
>>  +		cs-gpios = <&gpc 21 GPIO_ACTIVE_LOW>;
>>  +		num-chipselects = <1>;
>>  +
>>  +		spi@0 {
>>  +			compatible = "ili8960";
> 
> Should this be "ilitek,ili8960"?
> 
> Is there a binding & driver for this submitted somewhere? If not then 
> do
> we need this at all? It doesn't look like the existing platform data
> would actually lead to a driver being loaded so I'm wondering if we 
> can
> just drop this until such a driver (or at least a documented DT 
> binding)
> exists.

I can drop it. There is no driver for it, and I'm not even sure the LB60
has a ILI8960 in the first place.


> Thanks,
>     Paul
Paul Burton July 30, 2019, 5:43 p.m. UTC | #3 
Hello,

Paul Cercueil wrote:
> Move all the platform data to devicetree.
> 
> The only bit dropped is the PWM beeper, which requires the PWM driver
> to be updated. I figured it's okay to remove it here since it's really
> a non-critical device, and it'll be re-introduced soon enough.
> 
> The other change is the CS line of the SPI is now set as active low. The
> SPI core would have forced "active low" anyway, unless the 'spi-cs-high'
> property is set.
> 
> In the process of moving to devicetree, we also switched to new drivers:
> - We use the simple-audio-card and simple-amplifier drivers instead of
> the custom ASoC code;
> - We use the new Ingenic DRM driver coupled with the GiantPlus GPM940B0
> DRM panel driver instead of the old framebuffer driver;
> - We use the new jz4780-dma driver instead of the old jz4740-dma one;
> - We use the ingenic-nand and jz4740-ecc drivers instead of the old
> jz4740-nand driver;
> - We use ingenic-battery instead of jz4740-battery;
> - We use iio-hwmon instead of jz4740-hwmon;
> - We use ingenic-iio instead of the old jz4740-adc MFD driver.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Tested-by: Artur Rojek <contact@artur-rojek.eu>

Applied to mips-next.

Thanks,
    Paul

[ This message was auto-generated; if you believe anything is incorrect
  then please email paul.burton@mips.com to report it. ]
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/ingenic/qi_lb60.dts b/arch/mips/boot/dts/ingenic/qi_lb60.dts
index cc26650562c2..8f3750981714 100644
--- a/arch/mips/boot/dts/ingenic/qi_lb60.dts
+++ b/arch/mips/boot/dts/ingenic/qi_lb60.dts
@@ -4,6 +4,16 @@ 
 #include "jz4740.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/input/input.h>
+
+#define KEY_QI_QI	KEY_F13
+#define KEY_QI_UPRED	KEY_RIGHTALT
+#define KEY_QI_VOLUP	KEY_VOLUMEUP
+#define KEY_QI_VOLDOWN	KEY_VOLUMEDOWN
+#define KEY_QI_FN	KEY_LEFTCTRL
+
 / {
 	compatible = "qi,lb60", "ingenic,jz4740";
 
@@ -11,7 +21,16 @@ 
 		stdout-path = &uart0;
 	};
 
-	mmc_power: fixedregulator {
+	vcc: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	mmc_power: regulator@1 {
 		compatible = "regulator-fixed";
 		regulator-name = "mmc_vcc";
 		gpio = <&gpd 2 0>;
@@ -19,6 +38,203 @@ 
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	amp_supply: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "amp_supply";
+		gpio = <&gpd 4 0>;
+		enable-active-high;
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	amp: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpb 29 GPIO_ACTIVE_HIGH>;
+		VCC-supply = <&amp_supply>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "QI LB60";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,widgets =
+			"Speaker", "Speaker",
+			"Microphone", "Mic";
+		simple-audio-card,routing =
+			"MIC", "Mic",
+			"Speaker", "OUTL",
+			"Speaker", "OUTR",
+			"INL", "LOUT",
+			"INL", "ROUT";
+
+		simple-audio-card,aux-devs = <&amp>;
+
+		simple-audio-card,bitclock-master = <&dai_codec>;
+		simple-audio-card,frame-master = <&dai_codec>;
+
+		dai_cpu: simple-audio-card,cpu {
+			sound-dai = <&aic>;
+		};
+
+		dai_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key {
+			label = "Power";
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+			gpios = <&gpd 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-matrix-keypad";
+
+		col-scan-delay-us = <10>;
+		debounce-delay-ms = <10>;
+		wakeup-source;
+
+		row-gpios = <&gpd 18 0 &gpd 19 0 &gpd 20 0 &gpd 21 0
+			     &gpd 22 0 &gpd 23 0 &gpd 24 0 &gpd 26 0>;
+		col-gpios = <&gpc 10 0 &gpc 11 0 &gpc 12 0 &gpc 13 0
+			     &gpc 14 0 &gpc 15 0 &gpc 16 0 &gpc 17 0>;
+		gpio-activelow;
+
+		linux,keymap = <
+			MATRIX_KEY(0, 0, KEY_F1)	/* S2 */
+			MATRIX_KEY(0, 1, KEY_F2)	/* S3 */
+			MATRIX_KEY(0, 2, KEY_F3)	/* S4 */
+			MATRIX_KEY(0, 3, KEY_F4)	/* S5 */
+			MATRIX_KEY(0, 4, KEY_F5)	/* S6 */
+			MATRIX_KEY(0, 5, KEY_F6)	/* S7 */
+			MATRIX_KEY(0, 6, KEY_F7)	/* S8 */
+
+			MATRIX_KEY(1, 0, KEY_Q)	/* S10 */
+			MATRIX_KEY(1, 1, KEY_W)	/* S11 */
+			MATRIX_KEY(1, 2, KEY_E)	/* S12 */
+			MATRIX_KEY(1, 3, KEY_R)	/* S13 */
+			MATRIX_KEY(1, 4, KEY_T)	/* S14 */
+			MATRIX_KEY(1, 5, KEY_Y)	/* S15 */
+			MATRIX_KEY(1, 6, KEY_U)	/* S16 */
+			MATRIX_KEY(1, 7, KEY_I)	/* S17 */
+			MATRIX_KEY(2, 0, KEY_A)	/* S18 */
+			MATRIX_KEY(2, 1, KEY_S)	/* S19 */
+			MATRIX_KEY(2, 2, KEY_D)	/* S20 */
+			MATRIX_KEY(2, 3, KEY_F)	/* S21 */
+			MATRIX_KEY(2, 4, KEY_G)	/* S22 */
+			MATRIX_KEY(2, 5, KEY_H)	/* S23 */
+			MATRIX_KEY(2, 6, KEY_J)	/* S24 */
+			MATRIX_KEY(2, 7, KEY_K)	/* S25 */
+			MATRIX_KEY(3, 0, KEY_ESC)	/* S26 */
+			MATRIX_KEY(3, 1, KEY_Z)	/* S27 */
+			MATRIX_KEY(3, 2, KEY_X)	/* S28 */
+			MATRIX_KEY(3, 3, KEY_C)	/* S29 */
+			MATRIX_KEY(3, 4, KEY_V)	/* S30 */
+			MATRIX_KEY(3, 5, KEY_B)	/* S31 */
+			MATRIX_KEY(3, 6, KEY_N)	/* S32 */
+			MATRIX_KEY(3, 7, KEY_M)	/* S33 */
+			MATRIX_KEY(4, 0, KEY_TAB)	/* S34 */
+			MATRIX_KEY(4, 1, KEY_CAPSLOCK)	/* S35 */
+			MATRIX_KEY(4, 2, KEY_BACKSLASH)	/* S36 */
+			MATRIX_KEY(4, 3, KEY_APOSTROPHE)	/* S37 */
+			MATRIX_KEY(4, 4, KEY_COMMA)	/* S38 */
+			MATRIX_KEY(4, 5, KEY_DOT)	/* S39 */
+			MATRIX_KEY(4, 6, KEY_SLASH)	/* S40 */
+			MATRIX_KEY(4, 7, KEY_UP)	/* S41 */
+			MATRIX_KEY(5, 0, KEY_O)	/* S42 */
+			MATRIX_KEY(5, 1, KEY_L)	/* S43 */
+			MATRIX_KEY(5, 2, KEY_EQUAL)	/* S44 */
+			MATRIX_KEY(5, 3, KEY_QI_UPRED)	/* S45 */
+			MATRIX_KEY(5, 4, KEY_SPACE)	/* S46 */
+			MATRIX_KEY(5, 5, KEY_QI_QI)	/* S47 */
+			MATRIX_KEY(5, 6, KEY_RIGHTCTRL)	/* S48 */
+			MATRIX_KEY(5, 7, KEY_LEFT)	/* S49 */
+			MATRIX_KEY(6, 0, KEY_F8)	/* S50 */
+			MATRIX_KEY(6, 1, KEY_P)	/* S51 */
+			MATRIX_KEY(6, 2, KEY_BACKSPACE)/* S52 */
+			MATRIX_KEY(6, 3, KEY_ENTER)	/* S53 */
+			MATRIX_KEY(6, 4, KEY_QI_VOLUP)	/* S54 */
+			MATRIX_KEY(6, 5, KEY_QI_VOLDOWN)	/* S55 */
+			MATRIX_KEY(6, 6, KEY_DOWN)	/* S56 */
+			MATRIX_KEY(6, 7, KEY_RIGHT)	/* S57 */
+
+			MATRIX_KEY(7, 0, KEY_LEFTSHIFT)	/* S58 */
+			MATRIX_KEY(7, 1, KEY_LEFTALT) /* S59 */
+			MATRIX_KEY(7, 2, KEY_QI_FN)	/* S60 */
+			>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpc 23 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpc 22 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpc 21 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		spi@0 {
+			compatible = "ili8960";
+			reg = <0>;
+			spi-max-frequency = <30000>;
+			spi-3wire;
+		};
+	};
+
+	usb_charger: charger {
+		compatible = "gpio-charger";
+		charger-type = "usb-sdp";
+		gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
+		status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
+	};
+
+	simple_battery: battery {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3600000>;
+		voltage-max-design-microvolt = <4200000>;
+	};
+
+	pmu {
+		compatible = "ingenic,jz4740-battery";
+		io-channels = <&adc INGENIC_ADC_BATTERY>;
+		io-channel-names = "battery";
+		power-supplies = <&usb_charger>;
+		monitored-battery = <&simple_battery>;
+	};
+
+	hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc INGENIC_ADC_AUX>;
+	};
+
+	panel: panel {
+		compatible = "giantplus,gpm940b0";
+
+		power-supply = <&vcc>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&panel_output>;
+			};
+		};
+	};
+
+	usb_phy: usb-phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+
+		vcc-supply = <&vcc>;
+	};
 };
 
 &ext {
@@ -34,7 +250,84 @@ 
 	pinctrl-0 = <&pins_uart0>;
 };
 
+&uart1 {
+	status = "disabled";
+};
+
+&nemc {
+	nandc: nand-controller@1 {
+		compatible = "ingenic,jz4740-nand";
+		reg = <1 0 0x4000000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ingenic,bch-controller = <&ecc>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_nemc>;
+
+		rb-gpios = <&gpc 30 GPIO_ACTIVE_LOW>;
+
+		nand@1 {
+			reg = <1>;
+
+			nand-ecc-step-size = <512>;
+			nand-ecc-strength = <4>;
+			nand-ecc-mode = "hw";
+			nand-is-boot-medium;
+			nand-on-flash-bbt;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "boot";
+					reg = <0x0 0x400000>;
+				};
+
+				partition@400000 {
+					label = "kernel";
+					reg = <0x400000 0x400000>;
+				};
+
+				partition@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x0>;
+				};
+			};
+		};
+	};
+};
+
+&lcd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_lcd>;
+
+	port {
+		panel_output: endpoint {
+			remote-endpoint = <&panel_input>;
+		};
+	};
+};
+
+&udc {
+	phys = <&usb_phy>;
+};
+
 &pinctrl {
+	pins_lcd: lcd {
+		function = "lcd";
+		groups = "lcd-8bit";
+	};
+
+	pins_nemc: nemc {
+		function = "nand";
+		groups = "nand-cs1";
+	};
+
 	pins_uart0: uart0 {
 		function = "uart0";
 		groups = "uart0-data";
diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
index 88d6aa7d000b..390c82adc00c 100644
--- a/arch/mips/jz4740/Makefile
+++ b/arch/mips/jz4740/Makefile
@@ -10,10 +10,6 @@  obj-y += prom.o time.o reset.o setup.o \
 
 CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
 
-# board specific support
-
-obj-$(CONFIG_JZ4740_QI_LB60)	+= board-qi_lb60.o
-
 # PM support
 
 obj-$(CONFIG_PM) += pm.o
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
deleted file mode 100644
index f9dab810aab2..000000000000
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ /dev/null
@@ -1,491 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * linux/arch/mips/jz4740/board-qi_lb60.c
- *
- * QI_LB60 board support
- *
- * Copyright (c) 2009 Qi Hardware inc.,
- * Author: Xiangfu Liu <xiangfu@qi-hardware.com>
- * Copyright 2010, Lars-Peter Clausen <lars@metafoo.de>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/power_supply.h>
-#include <linux/power/jz4740-battery.h>
-#include <linux/power/gpio-charger.h>
-#include <linux/pwm.h>
-
-#include <linux/platform_data/jz4740/jz4740_nand.h>
-
-#include <asm/mach-jz4740/gpio.h>
-#include <asm/mach-jz4740/jz4740_fb.h>
-
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-jz4740/platform.h>
-
-/* GPIOs */
-#define QI_LB60_GPIO_KEYOUT(x)		(JZ_GPIO_PORTC(10) + (x))
-#define QI_LB60_GPIO_KEYIN(x)		(JZ_GPIO_PORTD(18) + (x))
-#define QI_LB60_GPIO_KEYIN8		JZ_GPIO_PORTD(26)
-
-/* NAND */
-
-/* Early prototypes of the QI LB60 had only 1GB of NAND.
- * In order to support these devices as well the partition and ecc layout is
- * initialized depending on the NAND size */
-static struct mtd_partition qi_lb60_partitions_1gb[] = {
-	{
-		.name = "NAND BOOT partition",
-		.offset = 0 * 0x100000,
-		.size = 4 * 0x100000,
-	},
-	{
-		.name = "NAND KERNEL partition",
-		.offset = 4 * 0x100000,
-		.size = 4 * 0x100000,
-	},
-	{
-		.name = "NAND ROOTFS partition",
-		.offset = 8 * 0x100000,
-		.size = (504 + 512) * 0x100000,
-	},
-};
-
-static struct mtd_partition qi_lb60_partitions_2gb[] = {
-	{
-		.name = "NAND BOOT partition",
-		.offset = 0 * 0x100000,
-		.size = 4 * 0x100000,
-	},
-	{
-		.name = "NAND KERNEL partition",
-		.offset = 4 * 0x100000,
-		.size = 4 * 0x100000,
-	},
-	{
-		.name = "NAND ROOTFS partition",
-		.offset = 8 * 0x100000,
-		.size = (504 + 512 + 1024) * 0x100000,
-	},
-};
-
-static int qi_lb60_ooblayout_ecc(struct mtd_info *mtd, int section,
-				 struct mtd_oob_region *oobregion)
-{
-	if (section)
-		return -ERANGE;
-
-	oobregion->length = 36;
-	oobregion->offset = 6;
-
-	if (mtd->oobsize == 128) {
-		oobregion->length *= 2;
-		oobregion->offset *= 2;
-	}
-
-	return 0;
-}
-
-static int qi_lb60_ooblayout_free(struct mtd_info *mtd, int section,
-				  struct mtd_oob_region *oobregion)
-{
-	int eccbytes = 36, eccoff = 6;
-
-	if (section > 1)
-		return -ERANGE;
-
-	if (mtd->oobsize == 128) {
-		eccbytes *= 2;
-		eccoff *= 2;
-	}
-
-	if (!section) {
-		oobregion->offset = 2;
-		oobregion->length = eccoff - 2;
-	} else {
-		oobregion->offset = eccoff + eccbytes;
-		oobregion->length = mtd->oobsize - oobregion->offset;
-	}
-
-	return 0;
-}
-
-static const struct mtd_ooblayout_ops qi_lb60_ooblayout_ops = {
-	.ecc = qi_lb60_ooblayout_ecc,
-	.free = qi_lb60_ooblayout_free,
-};
-
-static void qi_lb60_nand_ident(struct platform_device *pdev,
-		struct mtd_info *mtd, struct mtd_partition **partitions,
-		int *num_partitions)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-
-	if (chip->page_shift == 12) {
-		*partitions = qi_lb60_partitions_2gb;
-		*num_partitions = ARRAY_SIZE(qi_lb60_partitions_2gb);
-	} else {
-		*partitions = qi_lb60_partitions_1gb;
-		*num_partitions = ARRAY_SIZE(qi_lb60_partitions_1gb);
-	}
-
-	mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
-}
-
-static struct jz_nand_platform_data qi_lb60_nand_pdata = {
-	.ident_callback = qi_lb60_nand_ident,
-	.banks = { 1 },
-};
-
-static struct gpiod_lookup_table qi_lb60_nand_gpio_table = {
-	.dev_id = "jz4740-nand.0",
-	.table = {
-		GPIO_LOOKUP("GPIOC", 30, "busy", 0),
-		{ },
-	},
-};
-
-
-/* Keyboard*/
-
-#define KEY_QI_QI	KEY_F13
-#define KEY_QI_UPRED	KEY_RIGHTALT
-#define KEY_QI_VOLUP	KEY_VOLUMEUP
-#define KEY_QI_VOLDOWN	KEY_VOLUMEDOWN
-#define KEY_QI_FN	KEY_LEFTCTRL
-
-static const uint32_t qi_lb60_keymap[] = {
-	KEY(0, 0, KEY_F1),	/* S2 */
-	KEY(0, 1, KEY_F2),	/* S3 */
-	KEY(0, 2, KEY_F3),	/* S4 */
-	KEY(0, 3, KEY_F4),	/* S5 */
-	KEY(0, 4, KEY_F5),	/* S6 */
-	KEY(0, 5, KEY_F6),	/* S7 */
-	KEY(0, 6, KEY_F7),	/* S8 */
-
-	KEY(1, 0, KEY_Q),	/* S10 */
-	KEY(1, 1, KEY_W),	/* S11 */
-	KEY(1, 2, KEY_E),	/* S12 */
-	KEY(1, 3, KEY_R),	/* S13 */
-	KEY(1, 4, KEY_T),	/* S14 */
-	KEY(1, 5, KEY_Y),	/* S15 */
-	KEY(1, 6, KEY_U),	/* S16 */
-	KEY(1, 7, KEY_I),	/* S17 */
-	KEY(2, 0, KEY_A),	/* S18 */
-	KEY(2, 1, KEY_S),	/* S19 */
-	KEY(2, 2, KEY_D),	/* S20 */
-	KEY(2, 3, KEY_F),	/* S21 */
-	KEY(2, 4, KEY_G),	/* S22 */
-	KEY(2, 5, KEY_H),	/* S23 */
-	KEY(2, 6, KEY_J),	/* S24 */
-	KEY(2, 7, KEY_K),	/* S25 */
-	KEY(3, 0, KEY_ESC),	/* S26 */
-	KEY(3, 1, KEY_Z),	/* S27 */
-	KEY(3, 2, KEY_X),	/* S28 */
-	KEY(3, 3, KEY_C),	/* S29 */
-	KEY(3, 4, KEY_V),	/* S30 */
-	KEY(3, 5, KEY_B),	/* S31 */
-	KEY(3, 6, KEY_N),	/* S32 */
-	KEY(3, 7, KEY_M),	/* S33 */
-	KEY(4, 0, KEY_TAB),	/* S34 */
-	KEY(4, 1, KEY_CAPSLOCK),	/* S35 */
-	KEY(4, 2, KEY_BACKSLASH),	/* S36 */
-	KEY(4, 3, KEY_APOSTROPHE),	/* S37 */
-	KEY(4, 4, KEY_COMMA),	/* S38 */
-	KEY(4, 5, KEY_DOT),	/* S39 */
-	KEY(4, 6, KEY_SLASH),	/* S40 */
-	KEY(4, 7, KEY_UP),	/* S41 */
-	KEY(5, 0, KEY_O),	/* S42 */
-	KEY(5, 1, KEY_L),	/* S43 */
-	KEY(5, 2, KEY_EQUAL),	/* S44 */
-	KEY(5, 3, KEY_QI_UPRED),	/* S45 */
-	KEY(5, 4, KEY_SPACE),	/* S46 */
-	KEY(5, 5, KEY_QI_QI),	/* S47 */
-	KEY(5, 6, KEY_RIGHTCTRL),	/* S48 */
-	KEY(5, 7, KEY_LEFT),	/* S49 */
-	KEY(6, 0, KEY_F8),	/* S50 */
-	KEY(6, 1, KEY_P),	/* S51 */
-	KEY(6, 2, KEY_BACKSPACE),/* S52 */
-	KEY(6, 3, KEY_ENTER),	/* S53 */
-	KEY(6, 4, KEY_QI_VOLUP),	/* S54 */
-	KEY(6, 5, KEY_QI_VOLDOWN),	/* S55 */
-	KEY(6, 6, KEY_DOWN),	/* S56 */
-	KEY(6, 7, KEY_RIGHT),	/* S57 */
-
-	KEY(7, 0, KEY_LEFTSHIFT),	/* S58 */
-	KEY(7, 1, KEY_LEFTALT), /* S59 */
-	KEY(7, 2, KEY_QI_FN),	/* S60 */
-};
-
-static const struct matrix_keymap_data qi_lb60_keymap_data = {
-	.keymap		= qi_lb60_keymap,
-	.keymap_size	= ARRAY_SIZE(qi_lb60_keymap),
-};
-
-static const unsigned int qi_lb60_keypad_cols[] = {
-	QI_LB60_GPIO_KEYOUT(0),
-	QI_LB60_GPIO_KEYOUT(1),
-	QI_LB60_GPIO_KEYOUT(2),
-	QI_LB60_GPIO_KEYOUT(3),
-	QI_LB60_GPIO_KEYOUT(4),
-	QI_LB60_GPIO_KEYOUT(5),
-	QI_LB60_GPIO_KEYOUT(6),
-	QI_LB60_GPIO_KEYOUT(7),
-};
-
-static const unsigned int qi_lb60_keypad_rows[] = {
-	QI_LB60_GPIO_KEYIN(0),
-	QI_LB60_GPIO_KEYIN(1),
-	QI_LB60_GPIO_KEYIN(2),
-	QI_LB60_GPIO_KEYIN(3),
-	QI_LB60_GPIO_KEYIN(4),
-	QI_LB60_GPIO_KEYIN(5),
-	QI_LB60_GPIO_KEYIN(6),
-	QI_LB60_GPIO_KEYIN8,
-};
-
-static struct matrix_keypad_platform_data qi_lb60_pdata = {
-	.keymap_data = &qi_lb60_keymap_data,
-	.col_gpios	= qi_lb60_keypad_cols,
-	.row_gpios	= qi_lb60_keypad_rows,
-	.num_col_gpios	= ARRAY_SIZE(qi_lb60_keypad_cols),
-	.num_row_gpios	= ARRAY_SIZE(qi_lb60_keypad_rows),
-	.col_scan_delay_us	= 10,
-	.debounce_ms		= 10,
-	.wakeup			= 1,
-	.active_low		= 1,
-};
-
-static struct platform_device qi_lb60_keypad = {
-	.name		= "matrix-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &qi_lb60_pdata,
-	},
-};
-
-/* Display */
-static struct fb_videomode qi_lb60_video_modes[] = {
-	{
-		.name = "320x240",
-		.xres = 320,
-		.yres = 240,
-		.refresh = 30,
-		.left_margin = 140,
-		.right_margin = 273,
-		.upper_margin = 20,
-		.lower_margin = 2,
-		.hsync_len = 1,
-		.vsync_len = 1,
-		.sync = 0,
-		.vmode = FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct jz4740_fb_platform_data qi_lb60_fb_pdata = {
-	.width		= 60,
-	.height		= 45,
-	.num_modes	= ARRAY_SIZE(qi_lb60_video_modes),
-	.modes		= qi_lb60_video_modes,
-	.bpp		= 24,
-	.lcd_type	= JZ_LCD_TYPE_8BIT_SERIAL,
-	.pixclk_falling_edge = 1,
-};
-
-struct spi_gpio_platform_data qi_lb60_spigpio_platform_data = {
-	.num_chipselect = 1,
-};
-
-static struct platform_device qi_lb60_spigpio_device = {
-	.name = "spi_gpio",
-	.id   = 1,
-	.dev = {
-		.platform_data = &qi_lb60_spigpio_platform_data,
-	},
-};
-
-static struct gpiod_lookup_table qi_lb60_spigpio_gpio_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("GPIOC", 23,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOC", 22,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOC", 21,
-			    "cs", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct spi_board_info qi_lb60_spi_board_info[] = {
-	{
-		.modalias = "ili8960",
-		.chip_select = 0,
-		.bus_num = 1,
-		.max_speed_hz = 30 * 1000,
-		.mode = SPI_3WIRE,
-	},
-};
-
-/* Battery */
-static struct jz_battery_platform_data qi_lb60_battery_pdata = {
-	.gpio_charge =	JZ_GPIO_PORTC(27),
-	.gpio_charge_active_low = 1,
-	.info = {
-		.name = "battery",
-		.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
-		.voltage_max_design = 4200000,
-		.voltage_min_design = 3600000,
-	},
-};
-
-/* GPIO Key: power */
-static struct gpio_keys_button qi_lb60_gpio_keys_buttons[] = {
-	[0] = {
-		.code		= KEY_POWER,
-		.gpio		= JZ_GPIO_PORTD(29),
-		.active_low	= 1,
-		.desc		= "Power",
-		.wakeup		= 1,
-	},
-};
-
-static struct gpio_keys_platform_data qi_lb60_gpio_keys_data = {
-	.nbuttons = ARRAY_SIZE(qi_lb60_gpio_keys_buttons),
-	.buttons = qi_lb60_gpio_keys_buttons,
-};
-
-static struct platform_device qi_lb60_gpio_keys = {
-	.name = "gpio-keys",
-	.id =	-1,
-	.dev = {
-		.platform_data = &qi_lb60_gpio_keys_data,
-	}
-};
-
-/* beeper */
-static struct pwm_lookup qi_lb60_pwm_lookup[] = {
-	PWM_LOOKUP("jz4740-pwm", 4, "pwm-beeper", NULL, 0,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_device qi_lb60_pwm_beeper = {
-	.name = "pwm-beeper",
-	.id = -1,
-};
-
-/* charger */
-static char *qi_lb60_batteries[] = {
-	"battery",
-};
-
-static struct gpio_charger_platform_data qi_lb60_charger_pdata = {
-	.name = "usb",
-	.type = POWER_SUPPLY_TYPE_USB,
-	.gpio = JZ_GPIO_PORTD(28),
-	.gpio_active_low = 1,
-	.supplied_to = qi_lb60_batteries,
-	.num_supplicants = ARRAY_SIZE(qi_lb60_batteries),
-};
-
-static struct platform_device qi_lb60_charger_device = {
-	.name = "gpio-charger",
-	.dev = {
-		.platform_data = &qi_lb60_charger_pdata,
-	},
-};
-
-/* audio */
-static struct platform_device qi_lb60_audio_device = {
-	.name = "qi-lb60-audio",
-	.id = -1,
-};
-
-static struct gpiod_lookup_table qi_lb60_audio_gpio_table = {
-	.dev_id = "qi-lb60-audio",
-	.table = {
-		GPIO_LOOKUP("GPIOB", 29, "snd", 0),
-		GPIO_LOOKUP("GPIOD", 4, "amp", 0),
-		{ },
-	},
-};
-
-static struct platform_device *jz_platform_devices[] __initdata = {
-	&jz4740_udc_device,
-	&jz4740_udc_xceiv_device,
-	&jz4740_nand_device,
-	&qi_lb60_keypad,
-	&qi_lb60_spigpio_device,
-	&jz4740_framebuffer_device,
-	&jz4740_pcm_device,
-	&jz4740_i2s_device,
-	&jz4740_codec_device,
-	&jz4740_adc_device,
-	&jz4740_pwm_device,
-	&qi_lb60_gpio_keys,
-	&qi_lb60_pwm_beeper,
-	&qi_lb60_charger_device,
-	&qi_lb60_audio_device,
-};
-
-static struct pinctrl_map pin_map[] __initdata = {
-	/* NAND pin configuration */
-	PIN_MAP_MUX_GROUP_DEFAULT("jz4740-nand",
-			"10010000.pin-controller", "nand-cs1", "nand"),
-
-	/* fbdev pin configuration */
-	PIN_MAP_MUX_GROUP("jz4740-fb", PINCTRL_STATE_DEFAULT,
-			"10010000.pin-controller", "lcd-8bit", "lcd"),
-	PIN_MAP_MUX_GROUP("jz4740-fb", PINCTRL_STATE_SLEEP,
-			"10010000.pin-controller", "lcd-no-pins", "lcd"),
-
-	/* PWM pin configuration */
-	PIN_MAP_MUX_GROUP_DEFAULT("jz4740-pwm",
-			"10010000.pin-controller", "pwm4", "pwm4"),
-};
-
-
-static int __init qi_lb60_init_platform_devices(void)
-{
-	jz4740_framebuffer_device.dev.platform_data = &qi_lb60_fb_pdata;
-	jz4740_nand_device.dev.platform_data = &qi_lb60_nand_pdata;
-	jz4740_adc_device.dev.platform_data = &qi_lb60_battery_pdata;
-
-	gpiod_add_lookup_table(&qi_lb60_audio_gpio_table);
-	gpiod_add_lookup_table(&qi_lb60_nand_gpio_table);
-	gpiod_add_lookup_table(&qi_lb60_spigpio_gpio_table);
-
-	spi_register_board_info(qi_lb60_spi_board_info,
-				ARRAY_SIZE(qi_lb60_spi_board_info));
-
-	pwm_add_table(qi_lb60_pwm_lookup, ARRAY_SIZE(qi_lb60_pwm_lookup));
-	pinctrl_register_mappings(pin_map, ARRAY_SIZE(pin_map));
-
-	return platform_add_devices(jz_platform_devices,
-					ARRAY_SIZE(jz_platform_devices));
-
-}
-
-static int __init qi_lb60_board_setup(void)
-{
-	printk(KERN_INFO "Qi Hardware JZ4740 QI LB60 setup\n");
-
-	if (qi_lb60_init_platform_devices())
-		panic("Failed to initialize platform devices");
-
-	return 0;
-}
-arch_initcall(qi_lb60_board_setup);