| Message ID | 20190715231454.189459-4-gwendal@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Support accelerometers for veyron_minnie | expand |
On 16/7/19 1:14, Gwendal Grignou wrote: > Remove duplicate code in cros-ec-accel-legacy, > use cros-ec-sensors-core functions and structures when possible. > > On glimmer, check the 2 accelerometers are presented and working. > > Signed-off-by: Gwendal Grignou <gwendal@chromium.org> > Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> As the mutex problem is fixed: Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > --- > drivers/iio/accel/Kconfig | 4 +- > drivers/iio/accel/cros_ec_accel_legacy.c | 336 ++++------------------- > 2 files changed, 55 insertions(+), 285 deletions(-) > > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig > index 62a970a20219..7d0848f9ea45 100644 > --- a/drivers/iio/accel/Kconfig > +++ b/drivers/iio/accel/Kconfig > @@ -201,9 +201,7 @@ config HID_SENSOR_ACCEL_3D > > config IIO_CROS_EC_ACCEL_LEGACY > tristate "ChromeOS EC Legacy Accelerometer Sensor" > - select IIO_BUFFER > - select IIO_TRIGGERED_BUFFER > - select CROS_EC_LPC_REGISTER_DEVICE > + depends on IIO_CROS_EC_SENSORS_CORE > help > Say yes here to get support for accelerometers on Chromebook using > legacy EC firmware. > diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c > index ad19d9c716f4..f65578c65a1c 100644 > --- a/drivers/iio/accel/cros_ec_accel_legacy.c > +++ b/drivers/iio/accel/cros_ec_accel_legacy.c > @@ -12,6 +12,7 @@ > #include <linux/delay.h> > #include <linux/device.h> > #include <linux/iio/buffer.h> > +#include <linux/iio/common/cros_ec_sensors_core.h> > #include <linux/iio/iio.h> > #include <linux/iio/kfifo_buf.h> > #include <linux/iio/trigger_consumer.h> > @@ -25,191 +26,51 @@ > > #define DRV_NAME "cros-ec-accel-legacy" > > +#define CROS_EC_SENSOR_LEGACY_NUM 2 > /* > * Sensor scale hard coded at 10 bits per g, computed as: > * g / (2^10 - 1) = 0.009586168; with g = 9.80665 m.s^-2 > */ > #define ACCEL_LEGACY_NSCALE 9586168 > > -/* Indices for EC sensor values. */ > -enum { > - X, > - Y, > - Z, > - MAX_AXIS, > -}; > - > -/* State data for cros_ec_accel_legacy iio driver. */ > -struct cros_ec_accel_legacy_state { > - struct cros_ec_device *ec; > - > - /* > - * Array holding data from a single capture. 2 bytes per channel > - * for the 3 channels plus the timestamp which is always last and > - * 8-bytes aligned. > - */ > - s16 capture_data[8]; > - s8 sign[MAX_AXIS]; > - u8 sensor_num; > -}; > - > -static int ec_cmd_read_u8(struct cros_ec_device *ec, unsigned int offset, > - u8 *dest) > -{ > - return ec->cmd_readmem(ec, offset, 1, dest); > -} > - > -static int ec_cmd_read_u16(struct cros_ec_device *ec, unsigned int offset, > - u16 *dest) > -{ > - __le16 tmp; > - int ret = ec->cmd_readmem(ec, offset, 2, &tmp); > - > - *dest = le16_to_cpu(tmp); > - > - return ret; > -} > - > -/** > - * read_ec_until_not_busy() - Read from EC status byte until it reads not busy. > - * @st: Pointer to state information for device. > - * > - * This function reads EC status until its busy bit gets cleared. It does not > - * wait indefinitely and returns -EIO if the EC status is still busy after a > - * few hundreds milliseconds. > - * > - * Return: 8-bit status if ok, -EIO on error > - */ > -static int read_ec_until_not_busy(struct cros_ec_accel_legacy_state *st) > -{ > - struct cros_ec_device *ec = st->ec; > - u8 status; > - int attempts = 0; > - > - ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status); > - while (status & EC_MEMMAP_ACC_STATUS_BUSY_BIT) { > - /* Give up after enough attempts, return error. */ > - if (attempts++ >= 50) > - return -EIO; > - > - /* Small delay every so often. */ > - if (attempts % 5 == 0) > - msleep(25); > - > - ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status); > - } > - > - return status; > -} > - > -/** > - * read_ec_accel_data_unsafe() - Read acceleration data from EC shared memory. > - * @st: Pointer to state information for device. > - * @scan_mask: Bitmap of the sensor indices to scan. > - * @data: Location to store data. > - * > - * This is the unsafe function for reading the EC data. It does not guarantee > - * that the EC will not modify the data as it is being read in. > - */ > -static void read_ec_accel_data_unsafe(struct cros_ec_accel_legacy_state *st, > - unsigned long scan_mask, s16 *data) > -{ > - int i = 0; > - int num_enabled = bitmap_weight(&scan_mask, MAX_AXIS); > - > - /* Read all sensors enabled in scan_mask. Each value is 2 bytes. */ > - while (num_enabled--) { > - i = find_next_bit(&scan_mask, MAX_AXIS, i); > - ec_cmd_read_u16(st->ec, > - EC_MEMMAP_ACC_DATA + > - sizeof(s16) * > - (1 + i + st->sensor_num * MAX_AXIS), > - data); > - *data *= st->sign[i]; > - i++; > - data++; > - } > -} > - > -/** > - * read_ec_accel_data() - Read acceleration data from EC shared memory. > - * @st: Pointer to state information for device. > - * @scan_mask: Bitmap of the sensor indices to scan. > - * @data: Location to store data. > - * > - * This is the safe function for reading the EC data. It guarantees that > - * the data sampled was not modified by the EC while being read. > - * > - * Return: 0 if ok, -ve on error > - */ > -static int read_ec_accel_data(struct cros_ec_accel_legacy_state *st, > - unsigned long scan_mask, s16 *data) > -{ > - u8 samp_id = 0xff; > - u8 status = 0; > - int ret; > - int attempts = 0; > - > - /* > - * Continually read all data from EC until the status byte after > - * all reads reflects that the EC is not busy and the sample id > - * matches the sample id from before all reads. This guarantees > - * that data read in was not modified by the EC while reading. > - */ > - while ((status & (EC_MEMMAP_ACC_STATUS_BUSY_BIT | > - EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK)) != samp_id) { > - /* If we have tried to read too many times, return error. */ > - if (attempts++ >= 5) > - return -EIO; > - > - /* Read status byte until EC is not busy. */ > - ret = read_ec_until_not_busy(st); > - if (ret < 0) > - return ret; > - status = ret; > - > - /* > - * Store the current sample id so that we can compare to the > - * sample id after reading the data. > - */ > - samp_id = status & EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK; > - > - /* Read all EC data, format it, and store it into data. */ > - read_ec_accel_data_unsafe(st, scan_mask, data); > - > - /* Read status byte. */ > - ec_cmd_read_u8(st->ec, EC_MEMMAP_ACC_STATUS, &status); > - } > - > - return 0; > -} > - > static int cros_ec_accel_legacy_read(struct iio_dev *indio_dev, > struct iio_chan_spec const *chan, > int *val, int *val2, long mask) > { > - struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); > + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev); > s16 data = 0; > - int ret = IIO_VAL_INT; > + int ret; > + int idx = chan->scan_index; > + > + mutex_lock(&st->cmd_lock); > > switch (mask) { > case IIO_CHAN_INFO_RAW: > - ret = read_ec_accel_data(st, (1 << chan->scan_index), &data); > - if (ret) > - return ret; > + ret = st->read_ec_sensors_data(indio_dev, 1 << idx, &data); > + if (ret < 0) > + break; > + ret = IIO_VAL_INT; > *val = data; > - return IIO_VAL_INT; > + break; > case IIO_CHAN_INFO_SCALE: > + WARN_ON(st->type != MOTIONSENSE_TYPE_ACCEL); > *val = 0; > *val2 = ACCEL_LEGACY_NSCALE; > - return IIO_VAL_INT_PLUS_NANO; > + ret = IIO_VAL_INT_PLUS_NANO; > + break; > case IIO_CHAN_INFO_CALIBBIAS: > /* Calibration not supported. */ > *val = 0; > - return IIO_VAL_INT; > + ret = IIO_VAL_INT; > + break; > default: > - return -EINVAL; > + ret = cros_ec_sensors_core_read(st, chan, val, val2, > + mask); > + break; > } > + mutex_unlock(&st->cmd_lock); > + > + return ret; > } > > static int cros_ec_accel_legacy_write(struct iio_dev *indio_dev, > @@ -231,86 +92,14 @@ static const struct iio_info cros_ec_accel_legacy_info = { > .write_raw = &cros_ec_accel_legacy_write, > }; > > -/** > - * cros_ec_accel_legacy_capture() - The trigger handler function > - * @irq: The interrupt number. > - * @p: Private data - always a pointer to the poll func. > - * > - * On a trigger event occurring, if the pollfunc is attached then this > - * handler is called as a threaded interrupt (and hence may sleep). It > - * is responsible for grabbing data from the device and pushing it into > - * the associated buffer. > - * > - * Return: IRQ_HANDLED > +/* > + * Present the channel using HTML5 standard: > + * need to invert X and Y and invert some lid axis. > */ > -static irqreturn_t cros_ec_accel_legacy_capture(int irq, void *p) > -{ > - struct iio_poll_func *pf = p; > - struct iio_dev *indio_dev = pf->indio_dev; > - struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); > - > - /* Clear capture data. */ > - memset(st->capture_data, 0, sizeof(st->capture_data)); > - > - /* > - * Read data based on which channels are enabled in scan mask. Note > - * that on a capture we are always reading the calibrated data. > - */ > - read_ec_accel_data(st, *indio_dev->active_scan_mask, st->capture_data); > - > - iio_push_to_buffers_with_timestamp(indio_dev, (void *)st->capture_data, > - iio_get_time_ns(indio_dev)); > - > - /* > - * Tell the core we are done with this trigger and ready for the > - * next one. > - */ > - iio_trigger_notify_done(indio_dev->trig); > - > - return IRQ_HANDLED; > -} > - > -static char *cros_ec_accel_legacy_loc_strings[] = { > - [MOTIONSENSE_LOC_BASE] = "base", > - [MOTIONSENSE_LOC_LID] = "lid", > - [MOTIONSENSE_LOC_MAX] = "unknown", > -}; > - > -static ssize_t cros_ec_accel_legacy_loc(struct iio_dev *indio_dev, > - uintptr_t private, > - const struct iio_chan_spec *chan, > - char *buf) > -{ > - struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); > - > - return sprintf(buf, "%s\n", > - cros_ec_accel_legacy_loc_strings[st->sensor_num + > - MOTIONSENSE_LOC_BASE]); > -} > - > -static ssize_t cros_ec_accel_legacy_id(struct iio_dev *indio_dev, > - uintptr_t private, > - const struct iio_chan_spec *chan, > - char *buf) > -{ > - struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); > - > - return sprintf(buf, "%d\n", st->sensor_num); > -} > - > -static const struct iio_chan_spec_ext_info cros_ec_accel_legacy_ext_info[] = { > - { > - .name = "id", > - .shared = IIO_SHARED_BY_ALL, > - .read = cros_ec_accel_legacy_id, > - }, > - { > - .name = "location", > - .shared = IIO_SHARED_BY_ALL, > - .read = cros_ec_accel_legacy_loc, > - }, > - { } > -}; > +#define CROS_EC_ACCEL_ROTATE_AXIS(_axis) \ > + ((_axis) == CROS_EC_SENSOR_Z ? CROS_EC_SENSOR_Z : \ > + ((_axis) == CROS_EC_SENSOR_X ? CROS_EC_SENSOR_Y : \ > + CROS_EC_SENSOR_X)) > > #define CROS_EC_ACCEL_LEGACY_CHAN(_axis) \ > { \ > @@ -321,28 +110,28 @@ static const struct iio_chan_spec_ext_info cros_ec_accel_legacy_ext_info[] = { > BIT(IIO_CHAN_INFO_RAW) | \ > BIT(IIO_CHAN_INFO_CALIBBIAS), \ > .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE), \ > - .ext_info = cros_ec_accel_legacy_ext_info, \ > + .ext_info = cros_ec_sensors_ext_info, \ > .scan_type = { \ > .sign = 's', \ > - .realbits = 16, \ > - .storagebits = 16, \ > + .realbits = CROS_EC_SENSOR_BITS, \ > + .storagebits = CROS_EC_SENSOR_BITS, \ > }, \ > + .scan_index = CROS_EC_ACCEL_ROTATE_AXIS(_axis), \ > } \ > > -static struct iio_chan_spec ec_accel_channels[] = { > - CROS_EC_ACCEL_LEGACY_CHAN(X), > - CROS_EC_ACCEL_LEGACY_CHAN(Y), > - CROS_EC_ACCEL_LEGACY_CHAN(Z), > - IIO_CHAN_SOFT_TIMESTAMP(MAX_AXIS) > +static const struct iio_chan_spec cros_ec_accel_legacy_channels[] = { > + CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_X), > + CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_Y), > + CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_Z), > + IIO_CHAN_SOFT_TIMESTAMP(CROS_EC_SENSOR_MAX_AXIS) > }; > > static int cros_ec_accel_legacy_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > struct cros_ec_dev *ec = dev_get_drvdata(dev->parent); > - struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev); > struct iio_dev *indio_dev; > - struct cros_ec_accel_legacy_state *state; > + struct cros_ec_sensors_core_state *state; > int ret; > > if (!ec || !ec->ec_dev) { > @@ -350,46 +139,29 @@ static int cros_ec_accel_legacy_probe(struct platform_device *pdev) > return -EINVAL; > } > > - if (!ec->ec_dev->cmd_readmem) { > - dev_warn(&pdev->dev, "EC does not support direct reads.\n"); > - return -EINVAL; > - } > - > indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state)); > if (!indio_dev) > return -ENOMEM; > > - platform_set_drvdata(pdev, indio_dev); > - state = iio_priv(indio_dev); > - state->ec = ec->ec_dev; > - state->sensor_num = sensor_platform->sensor_num; > - > - indio_dev->dev.parent = dev; > - indio_dev->name = pdev->name; > - indio_dev->channels = ec_accel_channels; > - /* > - * Present the channel using HTML5 standard: > - * need to invert X and Y and invert some lid axis. > - */ > - ec_accel_channels[X].scan_index = Y; > - ec_accel_channels[Y].scan_index = X; > - ec_accel_channels[Z].scan_index = Z; > + ret = cros_ec_sensors_core_init(pdev, indio_dev, true); > + if (ret) > + return ret; > > - state->sign[Y] = 1; > + indio_dev->info = &cros_ec_accel_legacy_info; > + state = iio_priv(indio_dev); > > - if (state->sensor_num == MOTIONSENSE_LOC_LID) > - state->sign[X] = state->sign[Z] = -1; > - else > - state->sign[X] = state->sign[Z] = 1; > + state->read_ec_sensors_data = cros_ec_sensors_read_lpc; > > - indio_dev->num_channels = ARRAY_SIZE(ec_accel_channels); > - indio_dev->dev.parent = &pdev->dev; > - indio_dev->info = &cros_ec_accel_legacy_info; > - indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->channels = cros_ec_accel_legacy_channels; > + indio_dev->num_channels = ARRAY_SIZE(cros_ec_accel_legacy_channels); > + /* The lid sensor needs to be presented inverted. */ > + if (state->loc == MOTIONSENSE_LOC_LID) { > + state->sign[CROS_EC_SENSOR_X] = -1; > + state->sign[CROS_EC_SENSOR_Z] = -1; > + } > > ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, > - cros_ec_accel_legacy_capture, > - NULL); > + cros_ec_sensors_capture, NULL); > if (ret) > return ret; > >
On Tue, 16 Jul 2019 10:46:44 +0200 Enric Balletbo i Serra <enric.balletbo@collabora.com> wrote: > On 16/7/19 1:14, Gwendal Grignou wrote: > > Remove duplicate code in cros-ec-accel-legacy, > > use cros-ec-sensors-core functions and structures when possible. > > > > On glimmer, check the 2 accelerometers are presented and working. > > > > Signed-off-by: Gwendal Grignou <gwendal@chromium.org> > > Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > As the mutex problem is fixed: > > Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > Applied, Thanks, Jonathan > > --- > > drivers/iio/accel/Kconfig | 4 +- > > drivers/iio/accel/cros_ec_accel_legacy.c | 336 ++++------------------- > > 2 files changed, 55 insertions(+), 285 deletions(-) > > > > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig > > index 62a970a20219..7d0848f9ea45 100644 > > --- a/drivers/iio/accel/Kconfig > > +++ b/drivers/iio/accel/Kconfig > > @@ -201,9 +201,7 @@ config HID_SENSOR_ACCEL_3D > > > > config IIO_CROS_EC_ACCEL_LEGACY > > tristate "ChromeOS EC Legacy Accelerometer Sensor" > > - select IIO_BUFFER > > - select IIO_TRIGGERED_BUFFER > > - select CROS_EC_LPC_REGISTER_DEVICE > > + depends on IIO_CROS_EC_SENSORS_CORE > > help > > Say yes here to get support for accelerometers on Chromebook using > > legacy EC firmware. > > diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c > > index ad19d9c716f4..f65578c65a1c 100644 > > --- a/drivers/iio/accel/cros_ec_accel_legacy.c > > +++ b/drivers/iio/accel/cros_ec_accel_legacy.c > > @@ -12,6 +12,7 @@ > > #include <linux/delay.h> > > #include <linux/device.h> > > #include <linux/iio/buffer.h> > > +#include <linux/iio/common/cros_ec_sensors_core.h> > > #include <linux/iio/iio.h> > > #include <linux/iio/kfifo_buf.h> > > #include <linux/iio/trigger_consumer.h> > > @@ -25,191 +26,51 @@ > > > > #define DRV_NAME "cros-ec-accel-legacy" > > > > +#define CROS_EC_SENSOR_LEGACY_NUM 2 > > /* > > * Sensor scale hard coded at 10 bits per g, computed as: > > * g / (2^10 - 1) = 0.009586168; with g = 9.80665 m.s^-2 > > */ > > #define ACCEL_LEGACY_NSCALE 9586168 > > > > -/* Indices for EC sensor values. */ > > -enum { > > - X, > > - Y, > > - Z, > > - MAX_AXIS, > > -}; > > - > > -/* State data for cros_ec_accel_legacy iio driver. */ > > -struct cros_ec_accel_legacy_state { > > - struct cros_ec_device *ec; > > - > > - /* > > - * Array holding data from a single capture. 2 bytes per channel > > - * for the 3 channels plus the timestamp which is always last and > > - * 8-bytes aligned. > > - */ > > - s16 capture_data[8]; > > - s8 sign[MAX_AXIS]; > > - u8 sensor_num; > > -}; > > - > > -static int ec_cmd_read_u8(struct cros_ec_device *ec, unsigned int offset, > > - u8 *dest) > > -{ > > - return ec->cmd_readmem(ec, offset, 1, dest); > > -} > > - > > -static int ec_cmd_read_u16(struct cros_ec_device *ec, unsigned int offset, > > - u16 *dest) > > -{ > > - __le16 tmp; > > - int ret = ec->cmd_readmem(ec, offset, 2, &tmp); > > - > > - *dest = le16_to_cpu(tmp); > > - > > - return ret; > > -} > > - > > -/** > > - * read_ec_until_not_busy() - Read from EC status byte until it reads not busy. > > - * @st: Pointer to state information for device. > > - * > > - * This function reads EC status until its busy bit gets cleared. It does not > > - * wait indefinitely and returns -EIO if the EC status is still busy after a > > - * few hundreds milliseconds. > > - * > > - * Return: 8-bit status if ok, -EIO on error > > - */ > > -static int read_ec_until_not_busy(struct cros_ec_accel_legacy_state *st) > > -{ > > - struct cros_ec_device *ec = st->ec; > > - u8 status; > > - int attempts = 0; > > - > > - ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status); > > - while (status & EC_MEMMAP_ACC_STATUS_BUSY_BIT) { > > - /* Give up after enough attempts, return error. */ > > - if (attempts++ >= 50) > > - return -EIO; > > - > > - /* Small delay every so often. */ > > - if (attempts % 5 == 0) > > - msleep(25); > > - > > - ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status); > > - } > > - > > - return status; > > -} > > - > > -/** > > - * read_ec_accel_data_unsafe() - Read acceleration data from EC shared memory. > > - * @st: Pointer to state information for device. > > - * @scan_mask: Bitmap of the sensor indices to scan. > > - * @data: Location to store data. > > - * > > - * This is the unsafe function for reading the EC data. It does not guarantee > > - * that the EC will not modify the data as it is being read in. > > - */ > > -static void read_ec_accel_data_unsafe(struct cros_ec_accel_legacy_state *st, > > - unsigned long scan_mask, s16 *data) > > -{ > > - int i = 0; > > - int num_enabled = bitmap_weight(&scan_mask, MAX_AXIS); > > - > > - /* Read all sensors enabled in scan_mask. Each value is 2 bytes. */ > > - while (num_enabled--) { > > - i = find_next_bit(&scan_mask, MAX_AXIS, i); > > - ec_cmd_read_u16(st->ec, > > - EC_MEMMAP_ACC_DATA + > > - sizeof(s16) * > > - (1 + i + st->sensor_num * MAX_AXIS), > > - data); > > - *data *= st->sign[i]; > > - i++; > > - data++; > > - } > > -} > > - > > -/** > > - * read_ec_accel_data() - Read acceleration data from EC shared memory. > > - * @st: Pointer to state information for device. > > - * @scan_mask: Bitmap of the sensor indices to scan. > > - * @data: Location to store data. > > - * > > - * This is the safe function for reading the EC data. It guarantees that > > - * the data sampled was not modified by the EC while being read. > > - * > > - * Return: 0 if ok, -ve on error > > - */ > > -static int read_ec_accel_data(struct cros_ec_accel_legacy_state *st, > > - unsigned long scan_mask, s16 *data) > > -{ > > - u8 samp_id = 0xff; > > - u8 status = 0; > > - int ret; > > - int attempts = 0; > > - > > - /* > > - * Continually read all data from EC until the status byte after > > - * all reads reflects that the EC is not busy and the sample id > > - * matches the sample id from before all reads. This guarantees > > - * that data read in was not modified by the EC while reading. > > - */ > > - while ((status & (EC_MEMMAP_ACC_STATUS_BUSY_BIT | > > - EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK)) != samp_id) { > > - /* If we have tried to read too many times, return error. */ > > - if (attempts++ >= 5) > > - return -EIO; > > - > > - /* Read status byte until EC is not busy. */ > > - ret = read_ec_until_not_busy(st); > > - if (ret < 0) > > - return ret; > > - status = ret; > > - > > - /* > > - * Store the current sample id so that we can compare to the > > - * sample id after reading the data. > > - */ > > - samp_id = status & EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK; > > - > > - /* Read all EC data, format it, and store it into data. */ > > - read_ec_accel_data_unsafe(st, scan_mask, data); > > - > > - /* Read status byte. */ > > - ec_cmd_read_u8(st->ec, EC_MEMMAP_ACC_STATUS, &status); > > - } > > - > > - return 0; > > -} > > - > > static int cros_ec_accel_legacy_read(struct iio_dev *indio_dev, > > struct iio_chan_spec const *chan, > > int *val, int *val2, long mask) > > { > > - struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); > > + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev); > > s16 data = 0; > > - int ret = IIO_VAL_INT; > > + int ret; > > + int idx = chan->scan_index; > > + > > + mutex_lock(&st->cmd_lock); > > > > switch (mask) { > > case IIO_CHAN_INFO_RAW: > > - ret = read_ec_accel_data(st, (1 << chan->scan_index), &data); > > - if (ret) > > - return ret; > > + ret = st->read_ec_sensors_data(indio_dev, 1 << idx, &data); > > + if (ret < 0) > > + break; > > + ret = IIO_VAL_INT; > > *val = data; > > - return IIO_VAL_INT; > > + break; > > case IIO_CHAN_INFO_SCALE: > > + WARN_ON(st->type != MOTIONSENSE_TYPE_ACCEL); > > *val = 0; > > *val2 = ACCEL_LEGACY_NSCALE; > > - return IIO_VAL_INT_PLUS_NANO; > > + ret = IIO_VAL_INT_PLUS_NANO; > > + break; > > case IIO_CHAN_INFO_CALIBBIAS: > > /* Calibration not supported. */ > > *val = 0; > > - return IIO_VAL_INT; > > + ret = IIO_VAL_INT; > > + break; > > default: > > - return -EINVAL; > > + ret = cros_ec_sensors_core_read(st, chan, val, val2, > > + mask); > > + break; > > } > > + mutex_unlock(&st->cmd_lock); > > + > > + return ret; > > } > > > > static int cros_ec_accel_legacy_write(struct iio_dev *indio_dev, > > @@ -231,86 +92,14 @@ static const struct iio_info cros_ec_accel_legacy_info = { > > .write_raw = &cros_ec_accel_legacy_write, > > }; > > > > -/** > > - * cros_ec_accel_legacy_capture() - The trigger handler function > > - * @irq: The interrupt number. > > - * @p: Private data - always a pointer to the poll func. > > - * > > - * On a trigger event occurring, if the pollfunc is attached then this > > - * handler is called as a threaded interrupt (and hence may sleep). It > > - * is responsible for grabbing data from the device and pushing it into > > - * the associated buffer. > > - * > > - * Return: IRQ_HANDLED > > +/* > > + * Present the channel using HTML5 standard: > > + * need to invert X and Y and invert some lid axis. > > */ > > -static irqreturn_t cros_ec_accel_legacy_capture(int irq, void *p) > > -{ > > - struct iio_poll_func *pf = p; > > - struct iio_dev *indio_dev = pf->indio_dev; > > - struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); > > - > > - /* Clear capture data. */ > > - memset(st->capture_data, 0, sizeof(st->capture_data)); > > - > > - /* > > - * Read data based on which channels are enabled in scan mask. Note > > - * that on a capture we are always reading the calibrated data. > > - */ > > - read_ec_accel_data(st, *indio_dev->active_scan_mask, st->capture_data); > > - > > - iio_push_to_buffers_with_timestamp(indio_dev, (void *)st->capture_data, > > - iio_get_time_ns(indio_dev)); > > - > > - /* > > - * Tell the core we are done with this trigger and ready for the > > - * next one. > > - */ > > - iio_trigger_notify_done(indio_dev->trig); > > - > > - return IRQ_HANDLED; > > -} > > - > > -static char *cros_ec_accel_legacy_loc_strings[] = { > > - [MOTIONSENSE_LOC_BASE] = "base", > > - [MOTIONSENSE_LOC_LID] = "lid", > > - [MOTIONSENSE_LOC_MAX] = "unknown", > > -}; > > - > > -static ssize_t cros_ec_accel_legacy_loc(struct iio_dev *indio_dev, > > - uintptr_t private, > > - const struct iio_chan_spec *chan, > > - char *buf) > > -{ > > - struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); > > - > > - return sprintf(buf, "%s\n", > > - cros_ec_accel_legacy_loc_strings[st->sensor_num + > > - MOTIONSENSE_LOC_BASE]); > > -} > > - > > -static ssize_t cros_ec_accel_legacy_id(struct iio_dev *indio_dev, > > - uintptr_t private, > > - const struct iio_chan_spec *chan, > > - char *buf) > > -{ > > - struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); > > - > > - return sprintf(buf, "%d\n", st->sensor_num); > > -} > > - > > -static const struct iio_chan_spec_ext_info cros_ec_accel_legacy_ext_info[] = { > > - { > > - .name = "id", > > - .shared = IIO_SHARED_BY_ALL, > > - .read = cros_ec_accel_legacy_id, > > - }, > > - { > > - .name = "location", > > - .shared = IIO_SHARED_BY_ALL, > > - .read = cros_ec_accel_legacy_loc, > > - }, > > - { } > > -}; > > +#define CROS_EC_ACCEL_ROTATE_AXIS(_axis) \ > > + ((_axis) == CROS_EC_SENSOR_Z ? CROS_EC_SENSOR_Z : \ > > + ((_axis) == CROS_EC_SENSOR_X ? CROS_EC_SENSOR_Y : \ > > + CROS_EC_SENSOR_X)) > > > > #define CROS_EC_ACCEL_LEGACY_CHAN(_axis) \ > > { \ > > @@ -321,28 +110,28 @@ static const struct iio_chan_spec_ext_info cros_ec_accel_legacy_ext_info[] = { > > BIT(IIO_CHAN_INFO_RAW) | \ > > BIT(IIO_CHAN_INFO_CALIBBIAS), \ > > .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE), \ > > - .ext_info = cros_ec_accel_legacy_ext_info, \ > > + .ext_info = cros_ec_sensors_ext_info, \ > > .scan_type = { \ > > .sign = 's', \ > > - .realbits = 16, \ > > - .storagebits = 16, \ > > + .realbits = CROS_EC_SENSOR_BITS, \ > > + .storagebits = CROS_EC_SENSOR_BITS, \ > > }, \ > > + .scan_index = CROS_EC_ACCEL_ROTATE_AXIS(_axis), \ > > } \ > > > > -static struct iio_chan_spec ec_accel_channels[] = { > > - CROS_EC_ACCEL_LEGACY_CHAN(X), > > - CROS_EC_ACCEL_LEGACY_CHAN(Y), > > - CROS_EC_ACCEL_LEGACY_CHAN(Z), > > - IIO_CHAN_SOFT_TIMESTAMP(MAX_AXIS) > > +static const struct iio_chan_spec cros_ec_accel_legacy_channels[] = { > > + CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_X), > > + CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_Y), > > + CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_Z), > > + IIO_CHAN_SOFT_TIMESTAMP(CROS_EC_SENSOR_MAX_AXIS) > > }; > > > > static int cros_ec_accel_legacy_probe(struct platform_device *pdev) > > { > > struct device *dev = &pdev->dev; > > struct cros_ec_dev *ec = dev_get_drvdata(dev->parent); > > - struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev); > > struct iio_dev *indio_dev; > > - struct cros_ec_accel_legacy_state *state; > > + struct cros_ec_sensors_core_state *state; > > int ret; > > > > if (!ec || !ec->ec_dev) { > > @@ -350,46 +139,29 @@ static int cros_ec_accel_legacy_probe(struct platform_device *pdev) > > return -EINVAL; > > } > > > > - if (!ec->ec_dev->cmd_readmem) { > > - dev_warn(&pdev->dev, "EC does not support direct reads.\n"); > > - return -EINVAL; > > - } > > - > > indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state)); > > if (!indio_dev) > > return -ENOMEM; > > > > - platform_set_drvdata(pdev, indio_dev); > > - state = iio_priv(indio_dev); > > - state->ec = ec->ec_dev; > > - state->sensor_num = sensor_platform->sensor_num; > > - > > - indio_dev->dev.parent = dev; > > - indio_dev->name = pdev->name; > > - indio_dev->channels = ec_accel_channels; > > - /* > > - * Present the channel using HTML5 standard: > > - * need to invert X and Y and invert some lid axis. > > - */ > > - ec_accel_channels[X].scan_index = Y; > > - ec_accel_channels[Y].scan_index = X; > > - ec_accel_channels[Z].scan_index = Z; > > + ret = cros_ec_sensors_core_init(pdev, indio_dev, true); > > + if (ret) > > + return ret; > > > > - state->sign[Y] = 1; > > + indio_dev->info = &cros_ec_accel_legacy_info; > > + state = iio_priv(indio_dev); > > > > - if (state->sensor_num == MOTIONSENSE_LOC_LID) > > - state->sign[X] = state->sign[Z] = -1; > > - else > > - state->sign[X] = state->sign[Z] = 1; > > + state->read_ec_sensors_data = cros_ec_sensors_read_lpc; > > > > - indio_dev->num_channels = ARRAY_SIZE(ec_accel_channels); > > - indio_dev->dev.parent = &pdev->dev; > > - indio_dev->info = &cros_ec_accel_legacy_info; > > - indio_dev->modes = INDIO_DIRECT_MODE; > > + indio_dev->channels = cros_ec_accel_legacy_channels; > > + indio_dev->num_channels = ARRAY_SIZE(cros_ec_accel_legacy_channels); > > + /* The lid sensor needs to be presented inverted. */ > > + if (state->loc == MOTIONSENSE_LOC_LID) { > > + state->sign[CROS_EC_SENSOR_X] = -1; > > + state->sign[CROS_EC_SENSOR_Z] = -1; > > + } > > > > ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, > > - cros_ec_accel_legacy_capture, > > - NULL); > > + cros_ec_sensors_capture, NULL); > > if (ret) > > return ret; > > > >
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 62a970a20219..7d0848f9ea45 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -201,9 +201,7 @@ config HID_SENSOR_ACCEL_3D config IIO_CROS_EC_ACCEL_LEGACY tristate "ChromeOS EC Legacy Accelerometer Sensor" - select IIO_BUFFER - select IIO_TRIGGERED_BUFFER - select CROS_EC_LPC_REGISTER_DEVICE + depends on IIO_CROS_EC_SENSORS_CORE help Say yes here to get support for accelerometers on Chromebook using legacy EC firmware. diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c index ad19d9c716f4..f65578c65a1c 100644 --- a/drivers/iio/accel/cros_ec_accel_legacy.c +++ b/drivers/iio/accel/cros_ec_accel_legacy.c @@ -12,6 +12,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/iio/buffer.h> +#include <linux/iio/common/cros_ec_sensors_core.h> #include <linux/iio/iio.h> #include <linux/iio/kfifo_buf.h> #include <linux/iio/trigger_consumer.h> @@ -25,191 +26,51 @@ #define DRV_NAME "cros-ec-accel-legacy" +#define CROS_EC_SENSOR_LEGACY_NUM 2 /* * Sensor scale hard coded at 10 bits per g, computed as: * g / (2^10 - 1) = 0.009586168; with g = 9.80665 m.s^-2 */ #define ACCEL_LEGACY_NSCALE 9586168 -/* Indices for EC sensor values. */ -enum { - X, - Y, - Z, - MAX_AXIS, -}; - -/* State data for cros_ec_accel_legacy iio driver. */ -struct cros_ec_accel_legacy_state { - struct cros_ec_device *ec; - - /* - * Array holding data from a single capture. 2 bytes per channel - * for the 3 channels plus the timestamp which is always last and - * 8-bytes aligned. - */ - s16 capture_data[8]; - s8 sign[MAX_AXIS]; - u8 sensor_num; -}; - -static int ec_cmd_read_u8(struct cros_ec_device *ec, unsigned int offset, - u8 *dest) -{ - return ec->cmd_readmem(ec, offset, 1, dest); -} - -static int ec_cmd_read_u16(struct cros_ec_device *ec, unsigned int offset, - u16 *dest) -{ - __le16 tmp; - int ret = ec->cmd_readmem(ec, offset, 2, &tmp); - - *dest = le16_to_cpu(tmp); - - return ret; -} - -/** - * read_ec_until_not_busy() - Read from EC status byte until it reads not busy. - * @st: Pointer to state information for device. - * - * This function reads EC status until its busy bit gets cleared. It does not - * wait indefinitely and returns -EIO if the EC status is still busy after a - * few hundreds milliseconds. - * - * Return: 8-bit status if ok, -EIO on error - */ -static int read_ec_until_not_busy(struct cros_ec_accel_legacy_state *st) -{ - struct cros_ec_device *ec = st->ec; - u8 status; - int attempts = 0; - - ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status); - while (status & EC_MEMMAP_ACC_STATUS_BUSY_BIT) { - /* Give up after enough attempts, return error. */ - if (attempts++ >= 50) - return -EIO; - - /* Small delay every so often. */ - if (attempts % 5 == 0) - msleep(25); - - ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status); - } - - return status; -} - -/** - * read_ec_accel_data_unsafe() - Read acceleration data from EC shared memory. - * @st: Pointer to state information for device. - * @scan_mask: Bitmap of the sensor indices to scan. - * @data: Location to store data. - * - * This is the unsafe function for reading the EC data. It does not guarantee - * that the EC will not modify the data as it is being read in. - */ -static void read_ec_accel_data_unsafe(struct cros_ec_accel_legacy_state *st, - unsigned long scan_mask, s16 *data) -{ - int i = 0; - int num_enabled = bitmap_weight(&scan_mask, MAX_AXIS); - - /* Read all sensors enabled in scan_mask. Each value is 2 bytes. */ - while (num_enabled--) { - i = find_next_bit(&scan_mask, MAX_AXIS, i); - ec_cmd_read_u16(st->ec, - EC_MEMMAP_ACC_DATA + - sizeof(s16) * - (1 + i + st->sensor_num * MAX_AXIS), - data); - *data *= st->sign[i]; - i++; - data++; - } -} - -/** - * read_ec_accel_data() - Read acceleration data from EC shared memory. - * @st: Pointer to state information for device. - * @scan_mask: Bitmap of the sensor indices to scan. - * @data: Location to store data. - * - * This is the safe function for reading the EC data. It guarantees that - * the data sampled was not modified by the EC while being read. - * - * Return: 0 if ok, -ve on error - */ -static int read_ec_accel_data(struct cros_ec_accel_legacy_state *st, - unsigned long scan_mask, s16 *data) -{ - u8 samp_id = 0xff; - u8 status = 0; - int ret; - int attempts = 0; - - /* - * Continually read all data from EC until the status byte after - * all reads reflects that the EC is not busy and the sample id - * matches the sample id from before all reads. This guarantees - * that data read in was not modified by the EC while reading. - */ - while ((status & (EC_MEMMAP_ACC_STATUS_BUSY_BIT | - EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK)) != samp_id) { - /* If we have tried to read too many times, return error. */ - if (attempts++ >= 5) - return -EIO; - - /* Read status byte until EC is not busy. */ - ret = read_ec_until_not_busy(st); - if (ret < 0) - return ret; - status = ret; - - /* - * Store the current sample id so that we can compare to the - * sample id after reading the data. - */ - samp_id = status & EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK; - - /* Read all EC data, format it, and store it into data. */ - read_ec_accel_data_unsafe(st, scan_mask, data); - - /* Read status byte. */ - ec_cmd_read_u8(st->ec, EC_MEMMAP_ACC_STATUS, &status); - } - - return 0; -} - static int cros_ec_accel_legacy_read(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { - struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev); s16 data = 0; - int ret = IIO_VAL_INT; + int ret; + int idx = chan->scan_index; + + mutex_lock(&st->cmd_lock); switch (mask) { case IIO_CHAN_INFO_RAW: - ret = read_ec_accel_data(st, (1 << chan->scan_index), &data); - if (ret) - return ret; + ret = st->read_ec_sensors_data(indio_dev, 1 << idx, &data); + if (ret < 0) + break; + ret = IIO_VAL_INT; *val = data; - return IIO_VAL_INT; + break; case IIO_CHAN_INFO_SCALE: + WARN_ON(st->type != MOTIONSENSE_TYPE_ACCEL); *val = 0; *val2 = ACCEL_LEGACY_NSCALE; - return IIO_VAL_INT_PLUS_NANO; + ret = IIO_VAL_INT_PLUS_NANO; + break; case IIO_CHAN_INFO_CALIBBIAS: /* Calibration not supported. */ *val = 0; - return IIO_VAL_INT; + ret = IIO_VAL_INT; + break; default: - return -EINVAL; + ret = cros_ec_sensors_core_read(st, chan, val, val2, + mask); + break; } + mutex_unlock(&st->cmd_lock); + + return ret; } static int cros_ec_accel_legacy_write(struct iio_dev *indio_dev, @@ -231,86 +92,14 @@ static const struct iio_info cros_ec_accel_legacy_info = { .write_raw = &cros_ec_accel_legacy_write, }; -/** - * cros_ec_accel_legacy_capture() - The trigger handler function - * @irq: The interrupt number. - * @p: Private data - always a pointer to the poll func. - * - * On a trigger event occurring, if the pollfunc is attached then this - * handler is called as a threaded interrupt (and hence may sleep). It - * is responsible for grabbing data from the device and pushing it into - * the associated buffer. - * - * Return: IRQ_HANDLED +/* + * Present the channel using HTML5 standard: + * need to invert X and Y and invert some lid axis. */ -static irqreturn_t cros_ec_accel_legacy_capture(int irq, void *p) -{ - struct iio_poll_func *pf = p; - struct iio_dev *indio_dev = pf->indio_dev; - struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); - - /* Clear capture data. */ - memset(st->capture_data, 0, sizeof(st->capture_data)); - - /* - * Read data based on which channels are enabled in scan mask. Note - * that on a capture we are always reading the calibrated data. - */ - read_ec_accel_data(st, *indio_dev->active_scan_mask, st->capture_data); - - iio_push_to_buffers_with_timestamp(indio_dev, (void *)st->capture_data, - iio_get_time_ns(indio_dev)); - - /* - * Tell the core we are done with this trigger and ready for the - * next one. - */ - iio_trigger_notify_done(indio_dev->trig); - - return IRQ_HANDLED; -} - -static char *cros_ec_accel_legacy_loc_strings[] = { - [MOTIONSENSE_LOC_BASE] = "base", - [MOTIONSENSE_LOC_LID] = "lid", - [MOTIONSENSE_LOC_MAX] = "unknown", -}; - -static ssize_t cros_ec_accel_legacy_loc(struct iio_dev *indio_dev, - uintptr_t private, - const struct iio_chan_spec *chan, - char *buf) -{ - struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); - - return sprintf(buf, "%s\n", - cros_ec_accel_legacy_loc_strings[st->sensor_num + - MOTIONSENSE_LOC_BASE]); -} - -static ssize_t cros_ec_accel_legacy_id(struct iio_dev *indio_dev, - uintptr_t private, - const struct iio_chan_spec *chan, - char *buf) -{ - struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", st->sensor_num); -} - -static const struct iio_chan_spec_ext_info cros_ec_accel_legacy_ext_info[] = { - { - .name = "id", - .shared = IIO_SHARED_BY_ALL, - .read = cros_ec_accel_legacy_id, - }, - { - .name = "location", - .shared = IIO_SHARED_BY_ALL, - .read = cros_ec_accel_legacy_loc, - }, - { } -}; +#define CROS_EC_ACCEL_ROTATE_AXIS(_axis) \ + ((_axis) == CROS_EC_SENSOR_Z ? CROS_EC_SENSOR_Z : \ + ((_axis) == CROS_EC_SENSOR_X ? CROS_EC_SENSOR_Y : \ + CROS_EC_SENSOR_X)) #define CROS_EC_ACCEL_LEGACY_CHAN(_axis) \ { \ @@ -321,28 +110,28 @@ static const struct iio_chan_spec_ext_info cros_ec_accel_legacy_ext_info[] = { BIT(IIO_CHAN_INFO_RAW) | \ BIT(IIO_CHAN_INFO_CALIBBIAS), \ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE), \ - .ext_info = cros_ec_accel_legacy_ext_info, \ + .ext_info = cros_ec_sensors_ext_info, \ .scan_type = { \ .sign = 's', \ - .realbits = 16, \ - .storagebits = 16, \ + .realbits = CROS_EC_SENSOR_BITS, \ + .storagebits = CROS_EC_SENSOR_BITS, \ }, \ + .scan_index = CROS_EC_ACCEL_ROTATE_AXIS(_axis), \ } \ -static struct iio_chan_spec ec_accel_channels[] = { - CROS_EC_ACCEL_LEGACY_CHAN(X), - CROS_EC_ACCEL_LEGACY_CHAN(Y), - CROS_EC_ACCEL_LEGACY_CHAN(Z), - IIO_CHAN_SOFT_TIMESTAMP(MAX_AXIS) +static const struct iio_chan_spec cros_ec_accel_legacy_channels[] = { + CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_X), + CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_Y), + CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_Z), + IIO_CHAN_SOFT_TIMESTAMP(CROS_EC_SENSOR_MAX_AXIS) }; static int cros_ec_accel_legacy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct cros_ec_dev *ec = dev_get_drvdata(dev->parent); - struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev); struct iio_dev *indio_dev; - struct cros_ec_accel_legacy_state *state; + struct cros_ec_sensors_core_state *state; int ret; if (!ec || !ec->ec_dev) { @@ -350,46 +139,29 @@ static int cros_ec_accel_legacy_probe(struct platform_device *pdev) return -EINVAL; } - if (!ec->ec_dev->cmd_readmem) { - dev_warn(&pdev->dev, "EC does not support direct reads.\n"); - return -EINVAL; - } - indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state)); if (!indio_dev) return -ENOMEM; - platform_set_drvdata(pdev, indio_dev); - state = iio_priv(indio_dev); - state->ec = ec->ec_dev; - state->sensor_num = sensor_platform->sensor_num; - - indio_dev->dev.parent = dev; - indio_dev->name = pdev->name; - indio_dev->channels = ec_accel_channels; - /* - * Present the channel using HTML5 standard: - * need to invert X and Y and invert some lid axis. - */ - ec_accel_channels[X].scan_index = Y; - ec_accel_channels[Y].scan_index = X; - ec_accel_channels[Z].scan_index = Z; + ret = cros_ec_sensors_core_init(pdev, indio_dev, true); + if (ret) + return ret; - state->sign[Y] = 1; + indio_dev->info = &cros_ec_accel_legacy_info; + state = iio_priv(indio_dev); - if (state->sensor_num == MOTIONSENSE_LOC_LID) - state->sign[X] = state->sign[Z] = -1; - else - state->sign[X] = state->sign[Z] = 1; + state->read_ec_sensors_data = cros_ec_sensors_read_lpc; - indio_dev->num_channels = ARRAY_SIZE(ec_accel_channels); - indio_dev->dev.parent = &pdev->dev; - indio_dev->info = &cros_ec_accel_legacy_info; - indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = cros_ec_accel_legacy_channels; + indio_dev->num_channels = ARRAY_SIZE(cros_ec_accel_legacy_channels); + /* The lid sensor needs to be presented inverted. */ + if (state->loc == MOTIONSENSE_LOC_LID) { + state->sign[CROS_EC_SENSOR_X] = -1; + state->sign[CROS_EC_SENSOR_Z] = -1; + } ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, - cros_ec_accel_legacy_capture, - NULL); + cros_ec_sensors_capture, NULL); if (ret) return ret;